如果您是 iPhone 用户， iTunes^(iTunes)不仅仅是一个应用程序。将 iPhone 连接到 PC 时引起的大多数问题都可以通过 iTunes 解决。它可以帮助您组织和欣赏音乐、电影和电视节目。在某些情况下，它可能会遇到问题。在本文中，我们将指导您完成Apple移动设备驱动程序支持下载的过程，以修复Windows 10上缺少的^{(Windows 10)}Apple移动设备支持。

如何在 Windows 10 上安装 Apple 移动设备支持^{(How to Install Apple Mobile Device Support on Windows 10)}

Apple 移动设备支持可用于^{(used to communicate)}与连接到 PC 的任何 iPhone、iPad 或 iPod 进行通信。它是 iTunes 的软件组件之一。当您的设备连接到 PC 时，Apple 移动设备支持会自动检测您的设备。^{(Apple Mobile Device Support)}您可能需要下载Apple 移动设备支持^{(Apple Mobile Device Support)}来同步和备份Apple设备，而 iTunes 不是必需的。按照^(Follow)下面列出的任何方法在Windows 10中下载^{(Windows 10)}Apple移动设备驱动程序。

方法一：从微软商店下载^{(Method 1: Download from Microsoft Store)}

您可以从Microsoft Store^{(Microsoft Store)}下载 iTunes 。有时，当您的 iPhone 连接到 PC 时，iTunes 可能无法识别。如果您已从Microsoft Store下载 iTunes ，请按照给定的步骤在 Windows 10 上下载Apple移动设备驱动程序：^{(device driver)}

1. 按Windows 键^{(Windows key)}，键入设备管理器^{(device manager)}，然后单击打开^(Open)。

2. 向下滚动到通用串行总线控制器^{(Universal Serial Bus Controllers)}。点击它展开。

3. 右键单击​​ Apple Mobile Device USB Driver并选择更新驱动程序^{(Update driver)}。

注意：^(Note:)此驱动程序也可以在成像设备、便携式设备^{(Imaging Devices, Portable Devices)}或其他设备^{( Other Devices)}部分下找到。

4. 选择浏览我的电脑以查找驱动程序软件^{(Browse my computer for driver software)}。

5. 导航到移动设备支持^{(Mobile Device Support)}的安装位置。它一般位于：

C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers

6. 选择让我从计算机上的设备驱动程序列表中^{(Let me pick from a list of device drivers on my computer)}选择选项。

7. 选择Apple 移动设备 USB 驱动程序^{(Apple Mobile Device USB Driver)}。

8. 单击“下一步”^(Next)并等待安装完成，并在该过程完成后单击^(Click) “关闭”。^{(Close )}

另请阅读：^{(Also Read:)} 如何将播放列表从 iPhone 传输到 iTunes^{(How to Transfer Playlist from iPhone to iTunes)}

方法二：从苹果官网下载^{(Method 2: Download from Apple Website)}

按照以下步骤从官方网站下载支持 Windows 10的Apple移动设备的 iTunes：^(Apple)

1.从苹果官方网站下载^{(official Apple website)}iTunes。

2. 使用7-zip^(7-zip)打开下载的文件。

3. 现在，选择AppleApplicationSupport.msi和AppleMobileDeviceSupport64.msi并解压它们。

4. 运行这两个应用程序并等待安装^{(installation )}完成。

注意：^(Note:)如果从Apple网站安装 iTunes 后无法找到，则：^{(unable to find iTunes)}

1.断开并重新连接您的设备^{(reconnect your device)}。

2. 同时按下Windows + R 键^(keys)启动运行^{(Run )}对话框。

3. 键入%ProgramFiles%Common FilesAppleMobile Device SupportDrivers并按OK，如图所示。

4. 安装文件usbaapl64.inf或usbaapl.inf。

5.断开设备并重新启动您的PC^{(restart your PC)}。

另请阅读：^{(Also Read: )}如何将音乐从 CD 传输到 iPhone^{(How to Transfer Music from CD to iPhone)}

方法 3：不使用 iTunes 下载^{(Method 3: Download Without iTunes)}

您也可以在不使用 iTunes 的情况下获取 Apple 移动设备驱动程序。^{(device driver)}使用此方法 Windows 10 将自动检测并安装连接的设备。

注意：^(Note:)确保您拥有正品或Apple 认可的数据线^{(Apple-approved data cable)}，并且您的 PC 已连接到Internet。

1. 使用数据线将您的 iPhone 连接到 PC。等到^(Wait)您收到带有消息的通知Device is ready to use。

2. 然后，点击Windows 键^{(Windows key)}，输入 Apps and Features，然后点击Open。

4.滚动^(Scroll)列表，您会发现那里列出了Apple Mobile Device Support。

另请阅读：^{(Also Read:)} 修复 iTunes 自行打开^{(Fix iTunes Keeps Opening By Itself)}

专业提示：如何修复 Apple 移动设备支持 Windows 10 无法识别错误
^{(Pro Tip: How to Fix Apple Mobile Device Support Windows 10 is Not Recognized Error )}

如果按照上述方法仍无法识别Apple移动设备支持，请按照以下步骤运行其服务。^(Apple)

1. 同时按Windows + R keys打开运行^{(Run )}对话框。

2.输入services.msc并按Enter 键^{(Enter key)}。

3. 向下滚动并双击Apple Mobile Device Service。

4.在启动类型^{( Startup type)}下拉菜单中选择自动，如下图所示。^{(Automatic )}

5. 单击应用^(Apply)，然后单击确定^(OK)。

常见问题 (FAQ)^{(Frequently Asked Questions (FAQs))}

Q1。是否有任何第三方工具可以下载和修复 Apple 移动设备驱动程序？^{(Q1. Is there any third-party tool to download and fix Apple Mobile Device Driver?)}

答。^(Ans.)您可以尝试iMyFone TunesFix工具。一些用户说这个工具只需单击一下就可以使工作更轻松。

Q2。如何在 Windows 10 中卸载 iTunes？^{(Q2. How to uninstall iTunes in Windows 10?)}

答。^(Ans.)从已安装应用程序列表中查找iTunes ，如^(iTunes)方法 3^{(Method 3)}中所述。右键单击 iTunes，然后单击卸载^(Uninstall)以将其从 Windows 10 中删除。

Q3。从 Windows 10 中删除 iTunes 会删除音乐文件吗？^{(Q3. Will removing iTunes from Windows 10 delete music files?)}

答。^(Ans.) 不，从^(No)Windows 10卸载或删除 iTunes不会删除音乐文件。您可以删除笨重的软件，但仍将文件保留在 PC 上。

受到推崇的：^{(Recommended:)}

• 如何将 iPhone 投射到 Firestick^{(How to Cast iPhone to Firestick)}
• 修复 iPhone 上缺少 App Store^{(Fix App Store Missing on iPhone)}
• 修复计算机无法识别 iPhone^{(Fix Computer Not Recognizing iPhone)}
• 如何从 Apple ID 中删除设备^{(How to Remove a Device from Apple ID)}

我们希望本指南可以帮助您在 Windows 10 上下载和安装 Apple 移动设备支持^{(Apple mobile device support on Windows 10)}。让我们知道上面提到的哪种方法对您有最大的帮助。如果有的话，请将您的疑问和建议放在下面的评论部分。

How to Install Apple Mobile Device Support on Windows 10

iTunes is more than an app if you are an iPhone user. Most of the problems caused when connecting an iPhone to the PC are resolved by iTunes. It helps you organize and enjoy music, movies, and TV shows. In some cases, it can run into issues. In this article, we will guide you through the process of Apple mobile device driver support download in order to fix missing Apple mobile device support on Windows 10.

How to Install Apple Mobile Device Support on Windows 10

Apple Mobile Device Support can be used to communicate with any of the iPhone, iPad, or iPod connected to your PC. It is one of the software components of iTunes. Apple Mobile Device Support detects your device automatically when it is connected to a PC. You may need Apple Mobile Device Support download to sync and backup Apple devices, whereas iTunes is not required. Follow any of the methods listed below to download Apple mobile device driver in Windows 10.

Method 1: Download from Microsoft Store

You can download iTunes from Microsoft Store. Sometimes, iTunes may fail to recognize when your iPhone is connected to a PC. If you have downloaded iTunes from Microsoft Store, then follow the given steps for Apple mobile device driver download on Windows 10:

1. Press the Windows key, type device manager, and click on Open.

2. Scroll down to Universal Serial Bus Controllers. Click on it to expand.

3. Right-click Apple Mobile Device USB Driver and select Update driver.

Note: This driver can also be found under Imaging Devices, Portable Devices, or Other Devices section.

4. Select Browse my computer for driver software.

5. Navigate to the location where the Mobile Device Support is installed. It is generally located in:

C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers

6. Select the option Let me pick from a list of device drivers on my computer.

7. Select Apple Mobile Device USB Driver.

8. Click Next and wait for the installation to complete and Click Close once the process is finished.

Also Read: How to Transfer Playlist from iPhone to iTunes

Method 2: Download from Apple Website

Follow the below steps to download iTunes from the official website for Apple mobile device support Windows 10:

1. Download iTunes from the official Apple website.

2. Open the downloaded file using 7-zip.

3. Now, select AppleApplicationSupport.msi and AppleMobileDeviceSupport64.msi and extract them.

4. Run both the applications and wait for the installation to complete.

Note: If you are unable to find iTunes after installing it from the Apple website then:

1. Disconnect and reconnect your device.

2. Press Windows + R keys together to launch Run dialog box.

3. Type %ProgramFiles%Common FilesAppleMobile Device SupportDrivers and press OK as shown.

4. Install the file usbaapl64.inf or usbaapl.inf.

5. Disconnect the device and restart your PC.

Also Read: How to Transfer Music from CD to iPhone

Method 3: Download Without iTunes

You can also get Apple mobile device driver without using iTunes. Using this method Windows 10 will automatically detect and install the connected devices.

Note: Ensure that you have an authentic or Apple-approved data cable and your PC is connected to the Internet.

1. Connect your iPhone to a PC using a data cable. Wait till you get a notification with a message Device is ready to use.

2. Then, hit the Windows key, type Apps and Features, and click on Open.

4. Scroll through the list as you will find Apple Mobile Device Support listed there.

Also Read: Fix iTunes Keeps Opening By Itself

Pro Tip: How to Fix Apple Mobile Device Support Windows 10 is Not Recognized Error

If Apple mobile device support is not recognized even after following the above methods, follow the below steps to run its service.

1. Press Windows + R keys simultaneously to open Run dialog box.

2. Type services.msc and press Enter key.

3. Scroll down and double-click Apple Mobile Device Service.

4. Select Automatic in Startup type drop-down menu as depicted below.

5. Click Apply and then OK.

Frequently Asked Questions (FAQs)

Q1. Is there any third-party tool to download and fix Apple Mobile Device Driver?

Ans. You can try the iMyFone TunesFix tool. A few users say this tool makes work easier with a single click.

Q2. How to uninstall iTunes in Windows 10?

Ans. Find iTunes from the list of installed apps as done in Method 3. Right-click on iTunes and then click Uninstall to remove it from Windows 10.

Q3. Will removing iTunes from Windows 10 delete music files?

Ans. No, uninstalling or removing iTunes from Windows 10 will not delete music files. You can delete the bulky software and still retain files on your PC.

Recommended:

• How to Cast iPhone to Firestick
• Fix App Store Missing on iPhone
• Fix Computer Not Recognizing iPhone
• How to Remove a Device from Apple ID

We hope this guide helped you to download and install Apple mobile device support on Windows 10. Let us know which of the methods mentioned above helped you the best. Drop your queries and suggestions in the comment section below, if any.

Related posts

• USB Device不在Windows 10工作[求助]

• Windows 10上的Fix Device不是Migrated Error

• 如何在Windows 10到Backup and Restore Device Drivers

• Fix Cast至Device不在Windows 10工作

• Windows 10中的Fix I/O Device Error

• Fix Mobile hotspot不在Windows 10工作

• 如何在 Windows 10 上连接蓝牙设备

• 禁用Windows 10中的夹夹Zoom Feature

• Windows 10 Timeline轻松View Chrome Activity

• Windows 10 User Find Security Identifier（SID）

• 3 Ways至Add Album Art至Z86152至Windows 10中的MP3

• 强制清除Windows 10中的Print Queue

• Fix Keyboard未在Windows 10中键入

• 如何在Windows 10上共享Setup Network Files

• 修复 Windows 10 中的未知 USB 设备（设备描述符请求失败）

• Allow or Prevent Devices在Windows 10中唤醒Computer

• 如何禁用Windows 10 Firewall

• 如何在Windows 10中禁用粘滞Corners

• 3 Ways至Windows 10中的Increase Dedicated VRAM

• Windows 10中的Fix Black Desktop Background