蓝屏死机(a blue screen of death)是不好的。但是有了它，至少你的电脑会告诉你有问题。另一方面，如果您最终出现黑屏(black)死机，那么您只能靠自己了。你只能猜测问题出在哪里。
让我们看看如何在Windows 10(Windows 10)上修复黑屏死机错误的原因和解决方案。这样，您可以解决问题，而无需立即放弃您的计算机。
查明您的计算机(Computer)是否正常工作
黑屏问题的一个可能原因是Windows 10 安装(a Windows 10 installation)过程中的设置过程尚未完成。如果您有来自早期Windows安装的大型数据文件，如果安装需要花费您数小时的时间，请不要感到惊讶。
如果您不知道这一点，那么您一定是假设已经安装了Windows 。如果是这样，那一定是您现在黑屏的原因。解决方案是确定您的计算机是否仍在工作。
- 找到显示硬盘活动的LED 。现在，观察它。
- 如果此灯闪烁，则表示设置过程仍在进行中。在这种情况下，您所要做的就是等待它完成。
- 如果它没有亮起，则表示设置过程被卡住，无法继续进行。
关掉你的电脑
由于设置过程无法让您到达任何地方，这意味着您必须再试一次。
- 使用电源按钮关闭计算机。如果它没有像往常那样关闭，请按住电源按钮大约五到十秒钟。
- 通过拔下以太网(Ethernet)电缆并关闭所有无线适配器来断开网络连接。
- 也断开(Disconnect)其他外围设备的连接。这包括游戏控制器和外部硬盘驱动器。
- 也从计算机上断开电源线。然后等待大约 30 秒再做一遍。
- 重新连接电源线、外围设备、无线适配器和以太网(Ethernet)电缆。打开您的计算机并再次安装Windows。
转到安全模式
如果问题的根源是硬件性能问题，那么只加载必要的程序将节省一天的时间。
要将您的系统引导至安全模式(Mode)，请启动您的 PC，一旦您看到登录屏幕，请按住shift。然后选择电源按钮并选择Restart。
唤醒你的显示器
如果Windows 10(Windows 10)未检测到显示器，您的计算机也会出现黑屏死机。直接的解决方案：强制(force)它唤醒。只需为此打开键盘即可。
- 首先，点击Windows键。
- 然后按 ctrl(ctrl)，shift和B。
重新安装显卡
另一种可能性是有缺陷的视频卡。您需要做的是重新安装它。
- 首先，点击Windows键并选择Device Manager。
- 向下滚动，直到遇到显示适配器(Display adapters)。单击旁边的箭头展开此部分。
- 在那里，选择您的显示适配器。右键单击它并选择Uninstall device。
- 卸载后，再次右键单击此部分。然后选择扫描硬件更改(Scan for hardware changes )以使其重新出现以供您重新安装。
更新您的驱动程序
如果您的视频卡没有缺陷，则它可能已过时。如果是这样，这也是黑屏的原因。
- 要解决此问题，请再次转到设备管理器(Device Manager )。
- 转到显示适配器(Display adapters )并展开它。选择您的显示适配器并右键单击它。现在，选择更新驱动程序(Update driver)。
停止 RunOnce 进程
如果登录后出现黑屏，则问题可能来自正在运行的进程。
- 要开始解决此问题，请按Windows键并启动Task Manager。
- 您也可以按ctrl和shift和esc。这样做也会打开您的任务管理器。(Task Manager.)
- 在那里，检查RunOnce.exe进程。如果它正在运行，请右键单击它并选择Stop。
- 要使更改生效，请重新启动计算机。您可以通过点击重新启动按钮来执行此操作。
- 另一种选择是让任务管理器(Task Manager )铺平道路。首先，转到File。
- 在命令提示符窗口中输入shutdown -r -t 01并按回车键。
How To Fix The Black Screen Of Death On Windows 10
Getting a blue screen of death is bad. But with it, at least your computer will tell you that there’s something wrong. On the other hand, if you end up with a black screen of death, you’re on your own. You’re left guessing what the problem is.
Let’s look at the causes and solutions on how to fix a black screen of death error on Windows 10. This way, you can resolve the issue without having to immediately ditch your computer.
Find Out If Your Computer Is Working
A possible cause of a black screen issue is that the setup process during a Windows 10 installation is not yet complete. If you have large data files from an earlier Windows installation, don’t be surprised if the setup takes up hours of your time.
If you didn’t know this, you must have went ahead and assumed Windows is already installed. If so, it must be the reason why you now have a black screen. The solution is to find out if your computer is still working.
- Locate the LED that shows hard drive activity. Now, observe it.
- If this light is blinking, it means the setup process is still ongoing. In this case, all you have to do is wait for it to finish.
- If it’s not lighting up, it means the setup process is stuck, and it can’t proceed further.
Turn Off Your Computer
As the setup process is not getting you anywhere, it means you have to try again.
- Use the power button to turn off your computer. If it doesn’t turn off the way it normally does, press and hold the power button for about five to ten seconds.
- Disconnect from the net by unplugging your Ethernet cable and turning off any wireless adapters.
- Disconnect other peripherals, too. This includes game controllers and external hard drives.
- Disconnect the power cord from your computer, too. Then wait about thirty seconds to do things all over again.
- Reconnect the power cord, peripherals, wireless adapters, and the Ethernet cable. Turn on your computer and install Windows again.
Turn To Safe Mode
If the root of the problem is a hardware performance issue, then loading up only the essential programs will save the day.
To boot your system into Safe Mode, start your PC and once you see the sign in screen, hold down shift. Then choose the power button and go with Restart.
Wake Up Your Display
Your computer can also give you the black screen of death if Windows 10 isn’t detecting the display. The straightforward solution: force it to wake up. Just turn to your keyboard for this.
- First, hit the Windows key.
- Then hit ctrl, shift and B.
Reinstall The Video Card
Another possibility is a defective video card. What you need to do is reinstall it.
- First, hit the Windows key and select Device Manager.
- Scroll down until you come across Display adapters. Expand this section by clicking the arrow next to it.
- There, choose your display adapter. Right-click on it and choose Uninstall device.
- Once it’s uninstalled, right-click on this section again. Then select Scan for hardware changes to make it reappear for you to reinstall it.
Update Your Driver
If your video card is not defective, it could be outdated. If so, it’s also a cause of a black screen.
- To resolve this matter, go to Device Manager again.
- Go to Display adapters and expand it. Select your display adapter and right-click on it. Now, choose Update driver.
Stop RunOnce Processes
If you get a black screen after you log in, the problem could be from a process that’s running.
- To start resolving this, hit the Windows key and launch Task Manager.
- You can also press ctrl and shift and esc. Doing this will also open your Task Manager.
- There, check for a RunOnce.exe process. If it’s running, right-click on it and select Stop.
- For the change to take effect, restart your computer. You can do this by hitting the restart button.
- Another option is to let Task Manager pave the way. To start with this, go to File.
- There, key in cmd and press OK.
- At the command prompt window type in shutdown -r -t 01 and press enter.
