在Windows 11(Windows 11)或 10 PC上配对蓝牙(Bluetooth)设备时,您是否一直遇到“由于计量连接而导致设置不完整”错误?(Setup)本教程将展示如何解决这个问题。
当您将蓝牙设备与 PC 配对(pair a Bluetooth device to your PC)时,Microsoft Windows会自动下载任何适用的驱动程序以使其正常运行。但是,如果您通过按流量计费的 Internet 连接(metered internet connection)执行此操作,则数据使用限制可能会干扰并在蓝牙(Bluetooth)设备管理器中创建“由于按流量计费的连接而导致设置(Setup)不完整”错误。继续阅读以了解在Windows 11和 10中修复蓝牙(Bluetooth)计量连接错误必须采取的措施。
允许驱动程序下载
默认情况下,按流量计费的连接会阻止 Windows 在(metered connections prevent Windows from using up data)未经您许可的情况下使用数据。假设您在配对蓝牙(Bluetooth)设备后立即看到“由于计量连接而导致设置不完整”消息。在这种情况下,您必须配置您的计算机并允许它下载驱动程序,尽管它位于计量网络上。
1. 打开开始菜单(Start menu)并选择设置(Settings)。或者,按Windows 键(Windows Key)+ I。
2. 选择设置(Settings)窗口左侧窗格中的蓝牙和设备(Bluetooth & devices)以显示已连接设备的列表。在Windows 10中,选择设备(Device)>蓝牙(Bluetooth)并跳过下一步。
3. 选择查看更多设备(View more devices)。
4.向下滚动(Scroll)蓝牙管理器并打开(Bluetooth)通过计量连接下载(Download over metered connections)旁边的开关。
5. 退出设置应用程序。
重新添加蓝牙设备
如果蓝牙计量连接错误仍然存在,您必须删除有问题的(Bluetooth)蓝牙(Bluetooth)设备并将其重新添加到您的 PC。这将使您的 PC 再次下载相关驱动程序。
1. 选择开始(Start)>设置(Settings)。
2. 选择蓝牙和设备(Bluetooth & devices)(Windows 11) 或设备(Devices)>蓝牙(Bluetooth)(Windows 10)。
3. 选择蓝牙(Bluetooth)设备旁边的更多(More)(三个点),或者只需单击Windows 10 中的设备名称,然后(Windows 10—and)选择删除设备(Remove device)。
4. 选择是(Yes)确认。
5. 选择添加设备( Add device)。
6. 选择蓝牙(Bluetooth)。
7.再次完成蓝牙(Bluetooth)设备的配对过程,并再次将其连接到您的 PC。
禁用计量连接
有时,尽管允许, Windows可能无法通过计量连接下载设备驱动程序。解决此问题的最佳方法是将您的 Internet 连接取消标记为计量网络,然后再次尝试配对过程。
1. 打开设置(Settings)应用程序。
2. 在侧边栏选择网络和互联网(Network and internet)。
3. 选择屏幕顶部的属性。(Properties)
4. 关闭设置为计量连接(Set as metered connection)设置旁边的开关。
5. 禁用蓝牙(Bluetooth)设备并将其重新连接到您的计算机。
如果这有帮助,请随时返回并重新激活第4步中的(4)设置为输入的连接(Set as entered connection)选项。如果没有,请将其禁用并移至下一个修复程序。
重启你的电脑
如果您尝试重新启动计算机,请检查是否有影响。打开开始菜单(Start menu)并选择重新启动(Restart)。计算机重新启动后,删除并重新添加蓝牙(Bluetooth)设备。
忘记(Forget)并重新添加(Re-add)网络(Network Connection)连接
下一个修复涉及删除并重新连接触发“由于计量连接而设置不完整”错误的(Setup Incomplete)Wi-Fi网络。(Wi-Fi)这应该可以解决任何导致您的计算机一直记住为计量连接的损坏配置。
1. 选择系统托盘上的Wi-Fi状态图标。
2. 选择展开 Wi-Fi 连接( Expand Wi-Fi connections)按钮(向右箭头)以显示无线网络列表。
3.右键单击(Right-click)您当前连接的网络并选择忘记(Forget)。
4. 再次选择无线网络并选择连接(Connect)。
5. 输入网络安全密钥(密码)。
6. 选择下一步(Next )重新连接到无线网络。
7. 移除并重新添加蓝牙(Bluetooth)设备。
使用不同的 Internet 连接
另一个可能有帮助的解决方法是,如果可能,在连接到不同的Wi-Fi网络后重复(Wi-Fi)蓝牙(Bluetooth)设备的配对过程。在继续之前,请(Make)确保它未设置为计量连接。
运行网络疑难解答
Windows 11和 10都有自动故障排除程序,可以解决互联网连接和蓝牙(Bluetooth)的持续问题。现在尝试(Try)运行它们。
1. 打开设置(Settings)应用程序。
2. 向下滚动并选择疑难解答(Troubleshoot)。在 Windows 10 中,请改为选择更新和安全(Update and Security)>疑难解答(Troubleshoot)。
3. 选择其他疑难解答( Other troubleshooters)(Windows 11) 或其他疑难解答(Additional troubleshooters )(Windows 10)。
4. 运行Internet 连接的疑难解答。(Internet Connections.)
5.向下滚动(Scroll)到其他部分并运行蓝牙(Bluetooth )和网络适配器(Network Adapters)的疑难解答。
6. 移除并重新添加蓝牙(Bluetooth)设备。
更新视窗
更新 Windows 可以解决连接蓝牙(Bluetooth)设备时出现的已知问题。在开始之前,请(Make)务必取消将 Internet 连接标记为计量网络。
1. 打开设置(Settings)应用程序。
2. 选择Windows 更新( Windows Update)。
3. 选择检查更新(Check for updates)。然后,如果您看到任何待处理的更新,请选择下载并安装。(Download and install)
选择高级选项(Advanced options)>可选更新( Optional updates)并下载任何设备驱动程序更新(如果有)。在Windows 10中,选择查看可选更新(View optional updates )。您可以通过再次将蓝牙(Bluetooth)设备与您的 PC 配对来执行此操作。
检查支持软件
检查(Check)您可以从制造商网站下载的任何支持软件或设备驱动程序,例如罗技鼠标(Logitech)和键盘的罗技选件。(Logitech Options)如果可用,请安装它们并检查是否使“由于计量连接而导致设置不完整”错误消失。(Setup Incomplete)
重置网络设置
如果上述修复都没有帮助,是时候重置 Windows 上的网络设置了(reset the network settings on Windows)。这可以帮助排除阻止您的 PC 下载蓝牙(Bluetooth)设备相关驱动程序的潜在问题。
1. 打开设置(Settings)应用程序。
2. 选择网络和互联网(Network & internet)。
3. 选择高级网络设置(Advanced network settings)。在 Windows 10 中跳过此步骤。
4. 选择网络重置(Network reset)。
5. 选择立即重置(Reset now)。
计算机重新启动后,连接到 Wi-Fi 网络并再次将蓝牙(Bluetooth)设备与计算机配对。
注意(Note):您可能必须从您的 PC 制造商(戴尔(Dell)、惠普(HP)、联想(Lenovo)等)重新安装与网络相关的软件(如果Windows没有自动为您安装),并在重置过程后设置(set up )任何(any)VPN 或代理。( VPNs or proxies)
设置完成
Windows 11/10中的“由于计量连接而导致设置不完整”通常是一个小问题,您可以快速处理,但在极少数情况下可能需要高级故障排除。只需(Just)确保在连接任何蓝牙(Bluetooth)设备之前允许通过计量连接下载驱动程序,以尽量减少遇到相同问题的机会。
How to Fix “Setup Incomplete Because of a Metered Connection” in Windows 11/10
Do уou keep running into a “Setup incоmplete because of a metered connection” error while pairing a Bluetоoth device on a Windows 11 or 10 PC? This tutorial will show how to fіx that.
When you pair a Bluetooth device to your PC, Microsoft Windows automatically downloads any applicable drivers to make it run correctly. However, if you do that over a metered internet connection, data usage restrictions can interfere and create “Setup incomplete because of a metered connection” errors within the Bluetooth device manager. Read on to learn what you must do to fix the Bluetooth metered connection error in Windows 11 and 10.
Allow Driver Downloads
By default, metered connections prevent Windows from using up data without your permission. Suppose you see the “Setup incomplete because of a metered connection” message immediately after pairing a Bluetooth device. In that case, you must configure your computer and allow it to download drivers despite being on a metered network.
1. Open the Start menu and select Settings. Or, press Windows Key + I.
2. Select Bluetooth & devices on the left pane of the Settings window to reveal a list of connected devices. In Windows 10, select Device > Bluetooth instead and skip the next step.
3. Select View more devices.
4. Scroll down the Bluetooth manager and turn on the switch next to Download over metered connections.
5. Exit the Settings app.
Re-add the Bluetooth Device
If the Bluetooth metered connection error persists, you must remove and re-add the problematic Bluetooth device to your PC. That will make your PC perform another shot at downloading the relevant drivers.
1. Select Start > Settings.
2. Select Bluetooth & devices (Windows 11) or Devices > Bluetooth (Windows 10).
3. Select More (three-dots) next to the Bluetooth device—or just click the device name in Windows 10—and select Remove device.
4. Select Yes to confirm.
5. Select Add device.
6. Select Bluetooth.
7. Go through the pairing process for the Bluetooth device again and connect it to your PC again.
Disable Metered Connection
At times, Windows may fail to download device drivers over metered connections despite permitting it to. The best way to fix that is to unmark your internet connection as a metered network and attempt the pairing process again.
1. Open the Settings app.
2. Select Network and internet on the sidebar.
3. Select Properties at the top of the screen.
4. Turn off the switch next to the Set as metered connection setting.
5. Disable and reconnect the Bluetooth device to your computer.
If that helps, feel free to go back and reactivate the Set as entered connection option in step 4. If not, keep it disabled and move to the next fix.
Restart Your Computer
If you tried restarting your computer, check if that makes a difference. Open the Start menu and select Restart. Once your computer reboots, remove and re-add the Bluetooth device.
Forget and Re-add the Network Connection
The next fix involves removing and reconnecting the Wi-Fi network that triggers the “Setup Incomplete Because of a Metered Connection” error. That should resolve any corrupt configurations causing your computer to keep remembering as a metered connection.
1. Select the Wi-Fi status icon on the system tray.
2. Select the Expand Wi-Fi connections button (right arrow) to reveal a list of wireless networks.
3. Right-click the network you’re presently connected to and select Forget.
4. Select the wireless network again and select Connect.
5. Enter the network security key (password).
6. Select Next to reconnect to the wireless network.
7. Remove and re-add the Bluetooth device.
Use a Different Internet Connection
Another likely fix that can help involves repeating the pairing process for the Bluetooth device after connecting to a different Wi-Fi network if possible. Make sure it’s not set up as a metered connection before proceeding.
Run Network Troubleshooter
Both Windows 11 and 10 have automatic troubleshooters that can resolve persistent issues with internet connectivity and Bluetooth. Try running them now.
1. Open the Settings app.
2. Scroll down and select Troubleshoot. In Windows 10, select Update and Security > Troubleshoot instead.
3. Select Other troubleshooters (Windows 11) or Additional troubleshooters (Windows 10).
4. Run the troubleshooter for Internet Connections.
5. Scroll down to the Other section and run the troubleshooters for Bluetooth and Network Adapters.
6. Remove and re-add the Bluetooth device.
Update Windows
Updating Windows can resolve known issues that occur while connecting Bluetooth devices. Make sure to unmark the internet connection as a metered network before you begin.
1. Open the Settings app.
2. Select Windows Update.
3. Select Check for updates. Then, select Download and install if you see any pending updates.
Select Advanced options > Optional updates and download any device driver updates if available. In Windows 10, choose View optional updates instead. You may follow that by pairing the Bluetooth device with your PC again.
Check for Support Software
Check for any support software or device drivers that you can download from the manufacturer’s website—e.g., Logitech Options for Logitech mice and keyboards. If available, install them and check if that makes the “Setup Incomplete Because of a Metered Connection” error go away.
Reset Network Settings
If none of the fixes above help, it’s time to reset the network settings on Windows. That could help rule out underlying issues preventing your PC from downloading the relevant drivers for the Bluetooth device.
1. Open the Settings app.
2. Select Network & internet.
3. Select Advanced network settings. Skip this step in Windows 10.
4. Select Network reset.
5. Select Reset now.
Once your computer reboots, connect to a Wi-Fi network and pair the Bluetooth device with your computer again.
Note: You may have to reinstall network-related software (if Windows doesn’t do that for you automatically) from your PC manufacturer—Dell, HP, Lenovo, etc.—and set up any VPNs or proxies after the reset procedure.
Setup Complete
The “Setup incomplete because of a metered connection” in Windows 11/10 is usually a trivial issue that you can take care of quickly but may require advanced troubleshooting in rare cases. Just make sure to allow driver downloads over metered connections before connecting any Bluetooth devices to minimize the chances of running into the same issue.