您的Beats 耳机或耳塞^{(Beats headphones or earbuds)}是否发出噼啪声？它们是否无法充电或无法连接到您的手机或计算机？重置Beats耳机或耳塞是解决连接、音质和充电问题的绝佳方法。

重置Beats耳塞或耳机会断开它们与之前连接的所有设备的连接并取消配对。执行重置后， 您需要将Beats耳机重新连接到设备。^(Beats)

如何重置Beats 耳机^(Earphones)或耳塞

本节介绍重置所有Beats耳机或耳塞型号的说明。

重置 Beats Fit Pro

将^(Place)两个Beats Fit Pro耳机放入充电盒中，然后按照以下步骤操作。

1. 打开充电盒盖并保持打开状态。
2. 按住充电盒中的系统^(System)按钮至少 15 秒。

1. 当充电盒正面的 LED指示灯呈红色和白色闪烁时，松开系统按钮。^(System)

您已成功重置Beats Fit Pro并将其置于配对模式。将Beats Fit Pro连接到您的智能手机或计算机并检查其是否工作。

重置 Beats Flex 无线耳机^{(Reset Beats Flex Wireless Earphones)}

您可以在打开或关闭耳机时重置Beats Flex耳机。^{(Beats Flex)}按住电源^(Power)按钮（位于右侧控制模块上）一秒钟可打开或关闭 Beats Flex 。

请按照以下步骤重置Beats Flex耳机。

1. 按住电源^(Power)和音量调低按钮至少 15 秒。

1. ^(Release)当电源按钮上的LED指示灯闪烁时^(LED)松开两个按钮。该操作将耳机恢复至出厂设置并置于配对模式。当LED指示灯闪烁时将^(LED)Beats Flex连接到设备，然后检查其是否正常工作。

重置 Beats Studio Buds

将^(Place)左右Beats Studio Buds放入充电盒中，然后按照以下步骤操作。

1. 打开Beats Studio Buds^{(Beats Studio Buds)}充电盒的盖子。
2. 按住充电盒中的系统^(System)按钮至少 15 秒。
3. 当充电盒上的LED^(LED)指示灯闪烁红光和白光 时松开按钮。

1. 当LED^(LED)指示灯闪烁白光 时，将Beats Studio Buds连接到您的 iPhone、Mac、Windows PC或Android设备。

重置 Powerbeats

1. 按住电源^(Power)和音量调低按钮至少十秒钟。
2. ^(Release)当左耳机上的LED指示灯闪烁时^(LED)松开两个按钮。该按钮组合可重置您的 Powerbeats 并激活配对模式。

将Powerbeats^(Powerbeats)连接到您的设备，然后检查是否可以解决电源、声音或蓝牙^(Bluetooth)连接问题。

重置 Powerbeats2 无线耳机^{(Reset Powerbeats2 Wireless Earphones)}

将Powerbeats2插入电源并按照以下步骤重置入耳式耳机。

1. 按住Power/Connect和音量调低按钮至少十秒钟。这会将您的Powerbeats2 Wireless耳机重置为出厂设置。

1. 按住Power/Connect按钮 3-5 秒，将Powerbeats2置于配对模式。

当LED^(LED)指示灯闪烁 时，松开按钮并将耳机连接到您的设备。

重置 Powerbeats3 无线耳机^{(Reset Powerbeats3 Wireless Earphones)}

1. 按住音量调低^(Down)按钮和电源^(Power)按钮至少十秒钟。
2. 当耳机的 LED^{(’ LED)}指示灯闪烁 时松开按钮。

^(Pair)当指示灯闪烁时，将耳机与智能手机或计算机 配对。

重置 Powerbeats Pro 耳塞

将耳机放入 Beats Powerbeats Pro充电盒中，然后打开充电盒。然后^(Afterward)，按照以下步骤将耳机重置为出厂设置。

1. 按住充电盒中的系统^(System)按钮至少 15 秒。
2. 当充电盒正面的 LED指示灯呈红色和白色闪烁时，松开按钮。

打开设备的蓝牙^(Bluetooth)设置菜单，当LED指示灯仅闪烁白色时配对无线耳机^{(wireless earbuds)}。

重置 BeatsX

1. 按住音量调低^(Down)按钮和电源^(Power)按钮十秒钟。
2. ^(Release)当指示灯闪烁时 松开两个按钮。

如何重置Beats 耳罩式^{(Beats Over-Ear)}或贴耳式^(On-Ear)耳机

本节重点介绍将所有Beats^(Beats)耳机重置为出厂默认设置的分步说明。

重置 Beats Solo Pro

1. 按住模式^(Mode)和音量按钮至少十秒钟。
2. ^(Release)当LED^(LED)指示灯闪烁红光 时松开两个按钮。

重置 Beats Studio^{(Reset Beats Studio)}或Beats Studio Wireless

1. 按住耳机的电源^(Power)按钮至少十秒钟。
2. 当所有LED^(LED)灯呈白色闪烁时松开按钮。其中一个LED灯将在几秒钟内呈红色闪烁。

在重置过程中，这种从白到红的LED指示灯序列会出现 3 次。^(LED)当指示灯停止闪烁时， Beats Studio或^(Studio)Beats Studio Wireless将重置为出厂默认设置。^{(Beats Studio Wireless)}

重置 Beats Studio3 Wireless

1. 按住音量调低^(Down)按钮和电源^(Power)按钮十秒钟。
2. ^(Release)当LED灯闪烁时^(LED)松开两个按钮。

重置 Beats Solo2 Wireless

拔下Beats Solo2耳机的 USB^{(’ USB)}充电线，然后按照以下步骤操作。

1. 按住电源^(Power)按钮至少十秒钟。

1. 当所有五个LED^(LED)灯呈白色闪烁并且几秒钟后其中一个呈红色闪烁时，松开按钮。复位期间， LED指示灯序列连续出现 3 次。
2. 打开耳机（按住电源^(Power)按钮一秒钟），并在指示灯停止闪烁时将其连接到您的设备。
3. 按住左耳罩上的 b 按钮两秒钟，将Beats Solo2置于配对模式。

当耳机处于配对模式时，LED^(LEDs)会发出白光脉冲。

重置 Beats Solo3 Wireless

1. 按住电源^(Power)和音量调低按钮十秒钟。
2. 当LED^(LED)灯闪烁时松开按钮。

重置 Beats Solo Wireless

关闭 Beats Solo Wireless并按照以下步骤重置耳机。

1. 按住多功能^{(Multifunction)}按钮和音量调低按钮八秒钟。
2. 当蓝色和红色指示灯闪烁三次时松开按钮。

重置节拍

如果电池电量不足或某些按钮不起作用，您的Beats 耳塞或耳机可能无法重置。^{(Beats earbuds or headphones)}为Beats^(Beats)设备充电至少十分钟，然后尝试再次重置。如果您的Beats耳机或耳塞式耳机的按钮有故障，请前往附近的Apple Store 零售店^{(Apple Store)}进行维修或更换。

How to Reset Your Beats Earbuds or Headphones

Are your Beats headphones or earbuds making crackling noises? Do they fail to charge or connect to your phone or computer? Resetting your Beats headphones or earbuds is an excellent troubleshooting fix for connectivity, sound quality, and charging issues.

Resettings your Beats earbuds or headphones disconnects and unpairs them from all previously-connected devices. You’ll need to reconnect your Beats headphones to your device(s) after performing a reset.

How to Reset Beats Earphones or Earbuds

This section covers instructions to reset all Beats earphones or earbuds models.

Reset Beats Fit Pro

Place both Beats Fit Pro earbuds in their charging case and follow the steps below.

1. Open the charging case lid and keep it open.
2. Press and hold the System button in the charging case for at least 15 seconds.

1. Release the System button when the LED indicator light on the front of the charging case flashes red and white.

You’ve successfully reset your Beats Fit Pro and put it in pairing mode. Connect the Beats Fit Pro to your smartphone or computer and check if it works.

Reset Beats Flex Wireless Earphones

You can reset your Beats Flex earphones when powered on or off. Press and hold the Power button (on the right control module) for one second to turn your Beats Flex on or off.

Follow these steps to reset a Beats Flex earphone.

1. Press and hold the Power and Volume Down buttons for at least 15 seconds.

1. Release both buttons when the LED indicator light on the power button flashes. The operation restores the earphones to factory settings and puts them in pairing mode. Connect your Beats Flex to your device while the LED indicator flashes, and check if it works correctly.

Reset Beats Studio Buds

Place both left and right Beats Studio Buds in the charging case and follow these steps.

1. Open the lid of the Beats Studio Buds charging case.
2. Press and hold the System button in the charging case for at least 15 seconds.
3. Release the button when the LED indicator on the charging case flashes red and white lights.

1. Connect the Beats Studio Buds to your iPhone, Mac, Windows PC, or Android device when the LED indicator flashes a white light.

Reset Powerbeats

1. Press and hold the Power and Volume Down buttons for at least ten seconds.
2. Release both buttons when the LED indicator light on the left earphone flashes. The button combination resets your Powerbeats and activates pairing mode.

Connect the Powerbeats to your device and check if that resolves the power, sound, or Bluetooth connection issue.

Reset Powerbeats2 Wireless Earphones

Plug your Powerbeats2 into a power source and follow these steps to reset the in-ear headphones.

1. Press and hold the Power/Connect and Volume Down buttons for at least ten seconds. That reset your Powerbeats2 Wireless headphones to factory settings.

1. Hold the Power/Connect button for 3-5 seconds to put the Powerbeats2 in pairing mode.

Release the button and connect the earphones to your device when the LED indicator light flashes.

Reset Powerbeats3 Wireless Earphones

1. Press and hold the Volume Down and Power buttons for at least ten seconds.
2. Release the buttons when the earphones’ LED indicator light flashes.

Pair the earphones with your smartphone or computer while the indicator light flashes.

Reset Powerbeats Pro Earbuds

Place the earbuds in your Beats Powerbeats Pro case and open the charging case. Afterward, follow the steps below to reset the earbuds to factory settings.

1. Press and hold the System button in the charging case for at least 15 seconds.
2. Release the button when the LED indicator light at the front of the charging case flashes red and white.

Open your device’s Bluetooth settings menu and pair the wireless earbuds when the LED indicator flashes only white.

Reset BeatsX

1. Press and hold the Volume Down and Power buttons for ten seconds.
2. Release both buttons when the indicator light flashes.

How to Reset Beats Over-Ear or On-Ear Headphones

This section highlights step-by-step instructions for resetting all Beats headphones to factory default.

Reset Beats Solo Pro

1. Press and hold the Mode and Volume buttons for at least ten seconds.
2. Release both buttons when the LED indicator flashes a red light.

Reset Beats Studio or Beats Studio Wireless

1. Press and hold your headphones’ Power button for at least ten seconds.
2. Release the button when all the LED lights flash white. One of the LED lights will blink red in a few seconds.

This white-to-red LED light sequence occurs three times during the reset process. Your Beats Studio or Beats Studio Wireless resets to factory default when the lights stop flashing.

Reset Beats Studio3 Wireless

1. Press and hold the Volume Down and Power buttons for ten seconds.
2. Release both buttons when the LED lights flash.

Reset Beats Solo2 Wireless

Unplug the Beats Solo2 headphones’ USB charging cable and follow the steps below.

1. Press and hold the Power button for at least ten seconds.

1. Release the button when all five LED lights blink white and one blinks red after some seconds. The LED light sequence occurs three times consecutively during the reset.
2. Turn on the headphones (hold the Power button for one second) and connect it to your device when the lights stop blinking.
3. Hold the b button on the left earcup for two seconds to put your Beats Solo2 in pairing mode.

The LEDs pulse a white light when the headphone is in pairing mode.

Reset Beats Solo3 Wireless

1. Press and hold the Power and Volume Down buttons for ten seconds.
2. Release the buttons when the LED lights flash.

Reset Beats Solo Wireless

Switch off your Beats Solo Wireless and follow the steps below to reset the headphones.

1. Press and hold the Multifunction and Volume Down buttons for eight seconds.
2. Release the buttons when the blue and red indicator lights flash thrice.

Reset the Beat

Your Beats earbuds or headphones might fail to reset if low on battery power or some buttons don’t work. Charge your Beats device for at least ten minutes and try resetting it again. If your Beats headphones or earbuds have a faulty button, visit a nearby Apple Store to have it fixed or replaced.

Related posts

• 如何安全地删除 Mac 上的文件

• 如何使用 Apple Watch 解锁 Mac

• 如何检查您的 Mac 是否存在 Rootkit

• 如何锁定 Mac 上的应用程序

• 如何在 Mac 上重置 PRAM 和 SMC

• 如何在 Skype 上共享屏幕（Windows、Android、iPhone、Mac）

• 如何从 Mac OS X 访问 Windows 7 和 Windows 8 共享文件夹

• 如何在 Mac 上截屏：所有你需要知道的 -

• 如何使用截屏应用在 Mac 上截屏 -

• 如何将蓝牙鼠标连接到我的 Mac？

• 在 Mac 上剪切、复制和粘贴文本的 5 种方法

• 设置 Windows 7 和 Windows 8 以与 Mac OS X 和 Ubuntu Linux 共享

• 如何在 Mac 上打开终端？（3种方式）

• 如何在 Mac（Safari、Chrome、Firefox 和 Opera）上的浏览器中硬刷新页面

• 如何更改 Mac 上的键盘输入语言

• 如何在 Mac 上处理 PDF 文件

• 如何进行音频和视频群组 Skype 通话（Windows、Android、iPhone、Mac）

• Mac 上的 Wi-Fi 图标在哪里？如何启用或隐藏它

• 恢复网卡原始MAC地址的6种方法

• 在 Mac 上选择文本的完整指南