我使用VMWare Fusion在我的^{(VMWare Fusion)}Mac上安装了 Windows 7 ，今天我需要进入BIOS以更改我的 VM 的启动顺序。我继续并重新启动了 VM，认为进入BIOS^(BIOS)应该非常简单。并不真地。我遇到了几个问题。

首先，BIOS屏幕闪烁了大约一秒钟，然后消失了。伟大的！其次，在我的Mac^(Mac)上按 F2最终会增加屏幕亮度，而不是将密钥发送到 VM。我想，因为我处于全屏模式，所有按下的键都会自动发送到 VM，但事实并非如此。那么如何解决这个问题呢？

为了进入 VM 的BIOS，您必须将启动延迟时间编辑为更高的值。您可以通过编辑 VM 的VMX配置文件来做到这一点。这是你如何做到的。首先^(First)，继续关闭你的虚拟机。在虚拟机库^{(Virtual Machine Library)}屏幕上，按下Option键，然后右键单击虚拟机。

现在继续并单击在编辑器中打开配置文件^{(Open Config File in Editor)}。确保在右键单击时按住Option键，否则该选项将消失。^(Option)现在向下滚动到文件底部并添加以下行：

bios.bootDelay = "3000"

您的文件现在应该如下所示：

这就是你需要做的！保存文件，然后继续并重新启动您的 VM。现在，当BIOS设置屏幕出现时，您将有 3 秒而不是 1 秒！您可以将该值更改为您喜欢的任何值，因此如果您想要 7 秒，只需在上面的示例中输入 7000。

现在最后一部分是在您看到BIOS屏幕时按 F2 键。为了发送 F2 键，您必须按 fn + F2。fn 是Mac键盘上的功能键。它一直位于屏幕的左下角。请注意，您还可以在VMX文件中添加另一行，这将强制 VM在下次重新启动时进入BIOS ：

bios.forceSetupOnce = "TRUE"

请注意，一旦您启动 VM ，该行将自动设置为FALSE 。重新启动时，它将正常启动。如果您仍然无法显示BIOS屏幕或无法及时按 F2，这很有用。任何其他问题，发表评论，我会尽力提供帮助。享受！

VMWare Fusion BIOS Setup Loads Too Fast?

I have Windows 7 installed on my Mac using VMWare Fusion and today I needed to get into the BIOS in order to change the boot order for my VM. I went ahead and restarted the VM thinking it should bе pretty straightforward getting into the ΒIOS. Not really. I rаn into a few issueѕ.

Firstly, the BIOS screen flashed for about a second and then disappeared. Great! Secondly, pressing F2 on my Mac ended up increasing the brightness of the screen instead of sending the key to the VM. I figured since I was in full screen mode that all keys pressed would automatically be sent to the VM, but that is not the case. So how to fix this problem?

In order to get into the BIOS of a VM, you have to edit the boot delay time to something higher. You can do that by editing the VMX configuration file for your VM. Here’s how you do it. First, go ahead and shut down your VM. On the Virtual Machine Library screen, press down the Option key and then right-click on the VM.

Now go ahead and click on Open Config File in Editor. Make sure you keep pressing the Option key down while right-clicking otherwise the option will disappear. Now scroll down to the bottom of the file and add the following line:

bios.bootDelay = "3000"

Your file should look something like this now:

That’s all you need to do! Save the file and then go ahead and restart your VM. Now when the BIOS setup screen appears, you will have 3 seconds instead of 1! You can change that value to whatever you like, so if you want 7 seconds, just type in 7000 in the above example.

Now the final part is pressing the F2 key while you see the BIOS screen. In order to send the F2 key, you have to press fn + F2. fn is the function key on the Mac keyboard. It’s the one all the way in the bottom-left corner of the screen. Note you can also add another line to the VMX file that will force the VM to enter the BIOS on the next reboot:

bios.forceSetupOnce = "TRUE"

Note that this will line will automatically be set to FALSE once you boot up the VM. The new time you restart, it will boot up normally. It’s useful if you still can’t get the BIOS screen to show up or can’t press F2 in time. Any other questions, post a comment and I’ll try to help. Enjoy!

Related posts

• VMWare Fusion Windows 7/XP 机器中没有声音或音频？

• VMware 服务器 Web 访问默认用户名和密码

• 如何在 VMware Workstation Pro 中安装新操作系统

• 如何在 BIOS 中为 Intel 和 AMD 启用虚拟化

• 如何在 VMWare 中安装 Chrome 操作系统

• 如何在Guest operating system上安装VMware Tools

• 如何在VMware Workstation中access and use BIOS

• 如何使用 VMware Fusion 安装 Mac OS X

• SSD是在BIOS中，但Windows 10无法从中启动

• 什么是UEFI或统一可扩展Firmware Interface？

• 更改 VirtualBox 中的主机密钥

• 在 VirtualBox 中隐藏菜单栏和状态栏

• 如何将Legacy更改为UEFI，而无需重新安装Windows 11/10

• Kodi Fusion 存储库的 10 大替代方案

• 在 VirtualBox 中的主机和来宾操作系统之间共享文件夹

• 什么是CMOS，它用于什么？

• VMware and Hyper-V Virtual Machines Best免费Backup software

• Computer Beep代码列表及其含义

• VMware Workstation and Device/Credential Guard不兼容

• 如何在VMware Workstation Player上安装Windows 11