当我的 iPhone 无法充电时，我该怎么办？(What do I do when my iPhone won’t charge?)感觉就像世界末日即将来临，不是吗？是的，我们都知道这种感觉。将充电器推入插座或大力调整引脚无济于事。继续阅读以了解如何修复 iPhone 在插入时无法充电的问题。
如何修复 iPhone 插入时不充电(How to Fix iPhone not charging when plugged in)
让我们首先讨论为什么我的 iPhone 不充电问题出现。这个令人烦恼的问题可能是由许多因素引起的，例如：
- 未经认证的适配器。
- 不兼容Qi 无线充电的手机壳。(phone case)
- 充电口中的绒毛。
- 充电线损坏。
- 设备电池问题。
尝试下面列出的方法来解决为什么我的 iPhone 无法充电的问题(charge problem)。
方法一：清洁闪电端口(Method 1: Clean Lightning Port)
第一项检查是确保您的 iPhone闪电端口(lightning port)没有被粘性物质或棉绒碎片(gunk or lint flakes)堵塞。灰尘(Dust)被困在港口并随着时间的推移而积累。建议定期清洁设备的充电端口。要清洁iPhone 上的闪电端口，(lightning port)
- 首先，关闭(turn off)你的 iPhone。
- 然后，使用普通牙签(toothpick)，小心地刮掉棉绒。
-
请小心(Be cautious)，因为引脚很容易损坏。
方法 2：检查 Lightning 数据线和适配器(Method 2: Check Lightning Cable & Adapter)
尽管市场上充斥着价格不同的充电器，但并非所有充电器都可以安全使用或与 iPhone 兼容。如果您使用未经MFi (Made for iOS)认证(certified)的充电器，您将收到一条错误消息(error message)，指出附件可能未经认证(Accessory might not be certified)。
- 作为其安全协议的一部分，iOS 不允许您使用未经认证的适配器(uncertified adapter)为您的 iOS 设备充电。
- 如果您的充电器是MFi认证的，请确保闪电电缆(lightning cable)和电源适配器(power adapter)都处于良好的工作状态(sound working condition)。
- 要为 iPhone 充电，请尝试使用different cable/power adapter。通过这种方式，您将能够确定适配器或电缆(adapter or cable)是否有故障并需要更换。
另请阅读：(Also Read:)修复手机无法正常充电(Charge Properly)的12种方法(Ways)
方法3：无线充电兼容手机壳
(Method 3: Wireless Charging Compliant Phone Case
)
如果您使用无线充电器为(wireless charger)iPhone 8或更新机型充电，请确保iPhone 保护壳(iPhone case)符合无线充电标准(wireless charging compliant)，因为并非每个iPhone 保护壳(iPhone case)都支持 Qi 无线充电。以下是关于手机壳的一些基本检查，因为这可能会修复插入时 iPhone 无法充电的问题：
- 不要使用带有坚固外壳或金属后盖(metal back covers)的外壳。
-
(A heavy-duty case)不建议使用重型外壳或带环盖的外壳。(ring hold cover)
- 选择允许 Qi 无线充电的纤薄外壳。(slim cases)
-
(Remove the case)在将 iPhone 放在无线充电器上之前(wireless charger and confirm)取下保护壳，并确认iPhone 充电问题是否得到解答。
完成上述硬件检查后，现在让我们讨论与软件相关的修复。
方法 4：硬重置 iPhone(Method 4: Hard Reset iPhone)
强制重启(Force Restart)，也称为硬重置(Hard Reset)，始终可以作为解决所有常见问题的救星。因此，这是必须尝试的。强制重启 iPhone 的步骤因设备型号(device model)而异。请参阅后面列出的给定图片和步骤。(pic & steps)
适用于 iPhone (For iPhone) X 及更新机型(X, and later models)
- 快速按下释放音量增大(Volume up)按钮。
- 然后，快速按下降低音量(Volume down)按钮。
- 现在，按住侧面按钮(Side button)，直到出现Apple 标志(Apple logo)。然后，释放它。
对于配备面容 ID 的 iPhone、iPhone SE（第 2 代）、iPhone 8 或 iPhone 8 Plus：
(For iPhone with Face ID, iPhone SE (2nd generation), iPhone 8, or iPhone 8 Plus:
)
- 同时按住锁定(Lock)+Volume Up/ 音量调低(Volume Down)按钮。
- 按住按钮，直到显示滑动关机(slide to power off)选项。
- 现在，释放所有按钮并将滑块滑动(swipe)到屏幕右侧(right)。
- 这将关闭 iPhone。等待(Wait )几分钟。
- 按照步骤 1(step 1)再次打开它。
适用于 iPhone 7 或 iPhone 7 Plus(For iPhone 7 or iPhone 7 Plus)
- 同时按住降低音量(Volume Down)+锁定( Lock )按钮。
- 当您在屏幕上看到Apple 标志(Apple logo)时松开按钮。
适用于 iPhone 6s、iPhone 6s Plus、iPhone SE（第 1 代）或更早的设备(For iPhone 6s, iPhone 6s Plus, iPhone SE (1st generation), or earlier devices)
- 同时按住Sleep/Wake + Home按钮。
- (Release)当屏幕显示Apple 标志时(Apple logo)松开这两个键。
另请阅读：(Also Read:)如何修复 iPhone(Fix iPhone) 冻结(Frozen)或锁定
方法 5：iOS 更新(Method 5: iOS Update)
一个简单的软件升级(software upgrade)将帮助您解决各种问题，包括 iPhone 无法充电的问题。此外，它还提高了设备的整体性能。要将您的iOS 软件(iOS software)更新到最新版本，
1. 打开设置(Settings)应用程序。
2. 点击常规(General)，如图所示。
3. 点击软件更新(Software Update)，如下图所示。
4.下载并安装(Download and install)最新版本。
5.如果出现提示，请输入密码。(Passcode)
方法 6: 通过 iTunes 恢复 iPhone
(Method 6: Restore iPhone via iTunes
)
考虑并实施还原过程(Restore process)作为最后的手段，因为它会删除设备上的所有数据。
- 随着 macOS Catalina的发布，Apple将 iTunes 替换为Mac设备的Finder 。这意味着如果您运行的是 macOS (running macOS)Catalina或更高版本，则需要使用Finder来恢复您的计算机。(Finder)
- 您还可以使用iTunes恢复运行 macOS Mojave或更早版本的(Mojave)Macbook以及Windows PC上的数据。
注意：(Note:)在继续此方法之前，请确保备份(backup)所有重要数据。
以下是使用 iTunes 恢复 iPhone 的方法：
1. 打开iTunes。
2. 选择您的设备(device)。
3. 选择标题为“恢复 iPhone(Restore iPhone) ”的选项，如下图所示。
另请阅读：(Also Read:)智能手机电池(smartphone battery)充电缓慢的9 个原因(Reasons)
方法 7：修理你的 iPhone(Method 7: Get your iPhone Repaired)
如果您的 iPhone 仍然无法充电，则您的设备可能存在硬件问题。电池寿命(battery life)已经耗尽的可能性也很大。无论哪种方式，您都需要访问Apple Care以检查您的设备。
或者，访问Apple 支持页面(Apple Support Page)，解释问题并安排约会。
常见问题 (FAQ)(Frequently Asked Questions (FAQ))
Q1。修复 iPhone 充电端口不工作(Q1. Fix iPhone Charging Port Not Working)：如何清洁 iPhone 充电端口？(How do I clean my iPhone charging port? )
棉签法(Q-tip method)
- 找一块足够紧凑的纸或棉布(paper or cotton cloth)进入港口。
- 将 Q-tip 放在端口中。
- 轻轻地将它绕过码头，确保得到所有边缘。
- 将充电器电缆(charger cable)重新插入端口并开始充电。
回形针法(Paper clip method)
- 找支小钢笔、回形针或针。
- 小心地将薄金属放入端口。
- 在端口内轻轻旋转它以去除灰尘和棉绒(dust and lint)。
- 将充电器电缆(charger cable)重新插入端口。
压缩空气法(Compressed air method)
- 找到一个压缩空气罐。
- 保持罐子直立。
- 将喷嘴(Force)向下压，并以快速、轻快的方式喷射空气。
- 最后一次爆炸后，等待几秒钟。
- 将充电器电缆(charger cable)重新插入端口。
推荐的：(Recommended:)
- 如何重置Apple ID 安全问题(Apple ID Security Questions)
- 如何修复无法(Fix Unable)激活 iPhone
- 修复 iPhone 过热且无法开机
- 如何修复 Apple 病毒警告消息(Fix Apple Virus Warning Message)
我们希望您能够在我们的综合指南的帮助下修复插入时无法充电的 iPhone 。( fix iPhone not charging when plugged in)让我们知道哪种方法适合您。如果您有任何疑问或建议，请将它们放在评论部分(comment section)。
Why Won't My iPhone Charge? [7 Ways to Fix it]
What do I do when my iPhone won’t charge? It feels like the world is coming to an end, doesn’t it? Yes, we all know the feeling. Pushing the charger into the socket or adjusting the pin aggressively won’t help. Continue reading to learn how to fix iPhone not charging when plugged in issue.
How to Fix iPhone not charging when plugged in
Let us discuss Why is my iPhone not charging issue arises, in the first place. This vexing problem may be caused by a number of factors like:
- Uncertified adapter.
- An incompatible phone case that does not accept Qi-wireless charging.
- Lint in the charging port.
- Damaged charging cable.
- Device Battery issues.
Try the methods listed below to fix why won’t my iPhone charge problem.
Method 1: Clean Lightning Port
The first check is to make sure that your iPhone lightning port is not clogged with gunk or lint flakes. Dust gets trapped in the port and accumulates over time. It is advisable to clean the charging port of your device on a regular basis. To clean the lightning port on your iPhone,
- First, turn off your iPhone.
- Then, using a regular toothpick, carefully scrape the lint.
-
Be cautious as the pins can easily get damaged.
Method 2: Check Lightning Cable & Adapter
Though the market is filled with chargers available at different prices, not all of them are safe to use or compatible with iPhones. If you use a charger that is not MFi (Made for iOS) certified, you will get an error message stating Accessory might not be certified.
- As part of its security protocols, iOS will not allow you to charge your iOS device with an uncertified adapter.
- If your charger is MFi approved, make sure that both the lightning cable and the power adapter are in sound working condition.
- To charge your iPhone, try a different cable/power adapter. In this way, you will be able to determine if the adapter or cable is faulty and needs to be replaced.
Also Read: 12 Ways to Fix Your Phone Won’t Charge Properly
Method 3: Wireless Charging Compliant Phone Case
If you charge your iPhone 8 or later models with a wireless charger, make sure that the iPhone case is wireless charging compliant as not every iPhone case accepts Qi-wireless charging. Here are few basic checks to consider regarding phone cases as this could possibly, fix iPhone not charging when plugged in issue:
- Don’t use cases with rugged covers or metal back covers.
-
A heavy-duty case or a ring hold cover fitted case are not recommended.
- Choose slim cases that allow Qi-wireless charging.
-
Remove the case before placing the iPhone on the wireless charger and confirm if why won’t iPhone charge query is answered.
After completing the said hardware checks, let us now discuss software-related fixes.
Method 4: Hard Reset iPhone
Force Restart, also known as Hard Reset, always acts as a lifesaver to overcome all commonly faced problems. Therefore, it is a must-try. The steps to force restart the iPhone vary according to the device model. Refer given pic & steps listed thereafter.
For iPhone X, and later models
- Quickly press-release Volume up button.
- Then, Quickly press-release the Volume down button.
- Now, press-hold the Side button until the Apple logo appears. Then, release it.
For iPhone with Face ID, iPhone SE (2nd generation), iPhone 8, or iPhone 8 Plus:
- Press and hold the Lock + Volume Up/ Volume Down button at the same time.
- Keep holding the buttons until the slide to power off option is displayed.
- Now, release all the buttons and swipe the slider to the right of the screen.
- This will shut down the iPhone. Wait for few minutes.
- Follow step 1 to turn it on again.
For iPhone 7 or iPhone 7 Plus
- Press and hold the Volume Down + Lock button together.
- Release the buttons when you see the Apple logo on the screen.
For iPhone 6s, iPhone 6s Plus, iPhone SE (1st generation), or earlier devices
- Press-hold the Sleep/Wake + Home button simultaneously.
- Release both keys when the screen displays the Apple logo.
Also Read: How to Fix iPhone Frozen or Locked Up
Method 5: iOS Update
A simple software upgrade will help you solve a variety of problems including the iPhone won’t charge issues. Additionally, it improves the overall performance of your device. To update your iOS software to the latest version,
1. Open the Settings app.
2. Tap on General, as shown.
3. Tap Software Update, as depicted below.
4. Download and install the latest version.
5. Enter Passcode, if & when prompted.
Method 6: Restore iPhone via iTunes
Consider and implement the Restore process as the last resort as it would delete all data on the device.
- With the release of macOS Catalina, Apple substituted iTunes with Finder for Mac devices. This implies that you will need to use Finder to restore your computer if you’re running macOS Catalina or later.
- You can also use iTunes to recover your data on a Macbook running macOS Mojave or earlier, as well as on a Windows PC.
Note: Before proceeding with this method, make sure to backup all important data.
Here’s how to restore your iPhone using iTunes:
1. Open iTunes.
2. Select your device.
3. Choose the option titled Restore iPhone, as depicted below.
Also Read: 9 Reasons why your smartphone battery is charging slowly
Method 7: Get your iPhone Repaired
If your iPhone still won’t charge, there may be hardware problems on your device. There is also a strong possibility that the battery life has run out. Either way, you need to visit Apple Care to get your device checked.
Alternately, visit Apple Support Page, explain the issue, and schedule an appointment.
Frequently Asked Questions (FAQ)
Q1. Fix iPhone Charging Port Not Working: How do I clean my iPhone charging port?
Q-tip method
- Find a paper or cotton cloth that is compact enough to go into the port.
- Place the Q-tip in the port.
- Gently pass it around the dock, making sure to get all of the edges.
- Plug the charger cable back into the port and begin charging.
Paper clip method
- Find a tiny pen, a paperclip, or a needle.
- Put the thin metal cautiously into the port.
- Gently twirl it within the port to remove dust and lint.
- Plug the charger cable back into the port.
Compressed air method
- Locate a compressed air can.
- Keep the can upright.
- Force the nozzle downward and shoot the air in quick, light bursts.
- After the last blast, wait a few seconds.
- Plug the charger cable back into the port.
Recommended:
We hope you were able to fix iPhone not charging when plugged in with the help of our comprehensive guide. Let us know which method worked for you. If you have any queries or suggestions, drop them in the comment section.
