修复 Windows 更新错误 0x8024401c

如果您在尝试更新Windows 10时遇到^{(Windows 10)}错误代码 0x8024401c^{(error code 0x8024401c)}，那么您来对地方了，因为今天我们将讨论如何解决此问题。基本上，由于此^(Basically)错误 0x8024401c^{(error 0x8024401c)}，您将无法下载或安装任何更新。Windows 更新是系统的重要组成部分，可轻松防止您的 PC 出现漏洞，从而导致系统上安装恶意软件或病毒、间谍软件或广告软件。根据用户的系统配置^{(system configuration)}，您可能会遇到以下错误：

安装更新时出现一些问题，但我们稍后会重试。如果您一直看到此内容并想搜索 Web 或联系支持人员以获取信息，这可能会有所帮助：(0x8024401c)

修复 Windows 更新错误 0x8024401c

现在您可能会因为多种原因而遇到此错误消息^{(error message)}，例如注册表项损坏、系统文件损坏、驱动程序过时或不兼容、程序安装或卸载不完整^{(installation or uninstallation)}等^{(program etc)}。因此，不要浪费任何时间，让我们^{(time let)}看看如何在下面列出的步骤的帮助下实际修复 Windows 更新错误 0x8024401c 。^{(Fix Windows Updates Error 0x8024401c)}

Windows 更新错误 0x8024401c^{(Windows Updates Error 0x8024401c)} 修复^(Fix)

确保^(Make)创建一个还原点^{(restore point)} 以防万一^{(case something)}出现问题。

方法 1：运行 Windows 更新疑难解答^{(Method 1: Run Windows Update Troubleshooter)}

1. 打开控制面板，^{(control panel and search Troubleshooting)}在右上角的搜索栏中搜索疑难解答，^{(Search Bar)}然后点击^{(side and click)}疑难解答^{(Troubleshooting)}。

搜索疑难解答并单击疑难解答 | Windows 更新错误 0x8024401c 修复

2. 接下来，从左侧窗口^{(left window)}的窗格中选择^{(pane select)} 查看全部。^{(View all.)}

3. 然后从解决计算机^{(Troubleshoot computer)}问题列表中选择Windows 更新。^{(Windows Update.)}

一直向下滚动以找到 Windows Update 并双击它

4. 按照屏幕上的说明运行 Windows 更新疑难解答^{(Windows Update Troubleshoot run)}。

5. 重新启动您的 PC，您可能能够修复 Windows 更新错误 0x8024401c。^{( Fix Windows Updates Error 0x8024401c.)}

方法 2：运行 SFC 和 CHKDSK^{(Method 2: Run SFC and CHKDSK)}

1.打开命令提示符^{(Command Prompt)}。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

打开命令提示符。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

2.现在在cmd中输入以下内容并回车：

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

SFC 立即扫描命令提示符 | Windows 更新错误 0x8024401c 修复

3.等待^(Wait)上述过程完成，完成后，重新启动PC。

4. 接下来，运行 CHKDSK来修复文件系统错误^{(Fix File System Errors)}。

5. 让上述过程完成并再次重新启动您的 PC 以保存更改。

方法 3：运行 DISM^{(Method 3: Run DISM)}

1.打开命令提示符^{(Command Prompt)}。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

2. 现在在cmd^{(cmd and hit enter)}中键入以下内容并在每个之后按回车键：

Dism /Online /Cleanup-Image /CheckHealth
Dism /Online /Cleanup-Image /ScanHealth
Dism /Online /Cleanup-Image /RestoreHealth

DISM 恢复健康系统

3. 让DISM 命令运行并等待^{(DISM command run and wait)}它完成。

4. 如果上述命令^{(command doesn)}不起作用，请尝试以下操作：

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

注意：^(Note:) 将^(Replace)C:RepairSourceWindows 替换为您的修复源^{(repair source)}（Windows 安装或恢复光盘^{(Windows Installation or Recovery Disc)}）。

5. 重新启动您的 PC 以保存更改并查看您是否能够修复 Windows 更新错误 0x8024401c。^{(Fix Windows Updates Error 0x8024401c.)}

方法 4：禁用 IPv6^{(Method 4: Disable IPv6)}

1. 右键单击系统托盘^{(system tray)}上的WiFi 图标^{(WiFi icon)}，然后单击“打开网络和共享中心”。^{(Open Network and Sharing Center.)}”

右键单击系统托盘上的 WiFi 图标，然后单击右键单击系统托盘上的 WiFi 图标，然后单击打开网络和 Internet 设置

2. 现在 单击您当前的连接^{(click on your current connection)}以打开 设置。^(Settings.)

注意：^(Note:)如果您无法连接到您的网络，请使用以太网电缆^{(Ethernet cable)}进行连接，然后按照此步骤操作。

3. 在刚刚打开的窗口中单击 属性按钮^{(Properties button)} 。

wifi 连接属性| Windows 更新错误 0x8024401c 修复

4. 确保 uncheck Internet Protocol Version 6 (TCP/IP).

取消选中 Internet 协议版本 6 (TCP IPv6)

5.单击确定^{(Click OK)}，然后单击关闭^(Close)。重新启动^(Reboot)您的 PC 以保存更改。

方法 5：运行系统还原^{(Method 5: Run System Restore)}

1. 按 Windows 键 + R 并输入system.cpl 然后回车。

系统属性 sysdm

2. 选择系统保护^{(System Protection)}选项卡并选择系统还原。^{( System Restore.)}

系统属性中的系统还原

3.单击下一步^{(Click Next)}并选择所需的系统还原点^{(System Restore point)}。

系统还原

4. 按照屏幕提示完成系统还原^{(system restore)}。

5.重新启动后，您可能能够修复 Windows 更新错误 0x8024401c。^{(Fix Windows Updates Error 0x8024401c.)}

方法 6：注册表修复^{(Method 6: Registry Fix)}

1. 按 Windows 键 + R 然后键入regedit并按Enter打开注册表编辑器^{(Registry Editor)}。

运行命令 regedit | Windows 更新错误 0x8024401c 修复

2. 导航到以下注册表项^{(registry key)}：

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU

将 UseWUServer 的值更改为 0

3. 确保选择 AU，而不是在右侧窗格^{(right window pane)}中双击UseWUServer DWORD。

注意：^(Note:)如果找不到上述DWORD，则需要手动创建。右键单击 AU，然后选择New > DWORD (32-bit) value。将此键命名为UseWUServer并按 Enter。

4. 现在，在数值^(Value)数据字段中，输入0并单击确定。

将 UseWUServer 的值更改为 0 | Windows 更新错误 0x8024401c 修复

5. 重新启动您的 PC 以保存更改。

方法 7：使用谷歌 DNS^{(Method 7: Use Google DNS)}

您可以使用 Google 的DNS ，而不是您的^(DNS)Internet 服务提供商^{(Internet Service Provider)}或网络适配器制造商^{(network adapter manufacturer)}设置的默认DNS。这将确保您的浏览器使用的DNS与未加载的YouTube 视频无关。^{(YouTube video)}为此，

1. 右键单击^{(Right-click)}任务栏^(taskbar) 右端的 网络 (LAN) 图标^{(network (LAN) icon)}，然后单击 打开网络和 Internet 设置。^{(Open Network & Internet Settings.)}

右键单击 Wi-Fi 或以太网图标，然后选择打开网络和 Internet 设置

2. 在打开的设置^(settings) 应用程序中，单击右侧窗格中的更改适配器选项^{(Change adapter options)} 。

单击更改适配器选项

3. 右键单击^{( Right-click)} 要配置的网络，然后单击 属性。^{(Properties.)}

右键单击您的网络连接，然后单击属性

4. 单击列表中的Internet 协议版本 4 (IPv4)^{(Internet Protocol Version 4 (IPv4))} ，然后单击 属性。^{(Properties.)}

选择 Internet 协议版本 4 (TCPIPv4) 并再次单击属性按钮

另请阅读：^{(Also Read:)} 修复您的 DNS 服务器^{(Fix Your DNS Server)}可能不可用错误

5. 在“常规”选项卡下，选择“使用以下 DNS 服务器地址^{(Use the following DNS server addresses)}”并输入以下DNS地址。

首选 DNS 服务器：8.8.8.8
^{(Preferred DNS Server: 8.8.8.8
)}备用 DNS 服务器：8.8.4.4^{(Alternate DNS Server: 8.8.4.4)}

在 IPv4 设置中使用以下 DNS 服务器地址 | Windows 更新错误 0x8024401c 修复

6. 最后，单击窗口底部的确定以保存更改。^(OK)

7.重新启动您的PC，一旦系统重新启动^{(system restart)}，看看您是否能够修复Windows更新错误0x8024401c。^{( Fix Windows Updates Error 0x8024401c.)}

方法 8：执行干净启动^{(Method 8: Perform a Clean Boot)}

有时，第 3方软件可能与^{(party software)}Windows发生冲突，并可能导致Windows 更新错误^{(Windows Update error)}。要修复 Windows 更新错误 0x8024401c^{(Fix Windows Updates Error 0x8024401c)}，您需要在 PC 上执行干净启动并逐步诊断问题^{(issue step)}。

推荐的：^{(Recommended:)}

修复^(Fix)此程序^(Program)被组策略错误阻止^{(Group Policy Error)}
修复异常未知软件异常^{(software exception)}（0xc0000417）
如何修复 Windows 更新错误 0xc8000222^{(Fix Windows Update Error 0xc8000222)}
修复异常未知软件异常^{(software exception)}（0x40000015）

就是这样，您已成功修复 Windows 更新错误 0x8024401c^{(Fix Windows Updates Error 0x8024401c)}，但如果您对本指南仍有任何疑问，请随时在评论部分提出。

Windows Updates Error 0x8024401c Fix

If you are facing error code 0x8024401c while trying to update Windows 10, then yоu are at the right рlace as today we are going to discυss how to resolve this issue. Basically, yоu won’t be able to download or install any updates because of thiѕ error 0x8024401c. Windows updates are an essеntial part of your syѕtem to easily prеvеnt your PC from vulnerаbilities, leading to malware or virus, spywarе, or adware installed on your syѕtem. Depending upon user’s system configuration, you could face the following error:

There were some problems installing updates, but we’ll try again later. If you keep seeing this and want to search the web or contact support for information, this may help: (0x8024401c)

Fix Windows Updates Error 0x8024401c

Now you could face this error message because of a number of reasons such as corrupt registry entries, corrupted system files, outdated or incompatible drivers, incomplete installation or uninstallation of a program etc. So without wasting any time let’s see how to actually Fix Windows Updates Error 0x8024401c with the help of below-listed steps.

Windows Updates Error 0x8024401c Fix

Make sure to create a restore point just in case something goes wrong.

Method 1: Run Windows Update Troubleshooter

1. Open control panel and search Troubleshooting in the Search Bar on the top right side and click on Troubleshooting.

Search Troubleshoot and click on Troubleshooting | Windows Updates Error 0x8024401c Fix

2. Next, from the left window, pane select View all.

3. Then from the Troubleshoot computer problems list select Windows Update.

Scroll all the way down to find Windows Update and double-click on it

4. Follow on-screen instruction and let the Windows Update Troubleshoot run.

5. Restart your PC, and you may be able to Fix Windows Updates Error 0x8024401c.

Method 2: Run SFC and CHKDSK

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

SFC scan now command prompt | Windows Updates Error 0x8024401c Fix

3. Wait for the above process to finish and once done, restart your PC.

4. Next, run CHKDSK to Fix File System Errors.

5. Let the above process complete and again reboot your PC to save changes.

Method 3: Run DISM

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Now type the following in the cmd and hit enter after each one:

Dism /Online /Cleanup-Image /CheckHealth
Dism /Online /Cleanup-Image /ScanHealth
Dism /Online /Cleanup-Image /RestoreHealth

DISM restore health system

3. Let the DISM command run and wait for it to finish.

4. If the above command doesn’t work, then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with your repair source (Windows Installation or Recovery Disc).

5. Reboot your PC to save changes and see if you’re able to Fix Windows Updates Error 0x8024401c.

Method 4: Disable IPv6

1. Right-click on the WiFi icon on the system tray and then click on “Open Network and Sharing Center.”

Right click on WiFi icon on system tray and then click on Right click on WiFi icon on system tray and then click on Open Network & Internet settings

2. Now click on your current connection to open Settings.

Note: If you can’t connect to your network, then use an Ethernet cable to connect and then follow this step.

3. Click the Properties button in the window that just open.

wifi connection properties | Windows Updates Error 0x8024401c Fix

4. Make sure to uncheck Internet Protocol Version 6 (TCP/IP).

uncheck Internet Protocol Version 6 (TCP IPv6)

5. Click OK, then click Close. Reboot your PC to save changes.

Method 5: Run System Restore

1. Press Windows Key + R and type system.cpl then hit enter.

system properties sysdm

2. Select the System Protection tab and choose System Restore.

system restore in system properties

3. Click Next and choose the desired System Restore point.

system-restore

4. Follow the on-screen instruction to complete system restore.

5. After reboot, you may be able to Fix Windows Updates Error 0x8024401c.

Method 6: Registry Fix

1. Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

Run command regedit | Windows Updates Error 0x8024401c Fix

2. Navigate to the following registry key:

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU

change the value of UseWUServer to 0

3. Make sure to select AU than in the right window pane double click on UseWUServer DWORD.

Note: If you can’t find the above DWORD then you need to create it manually. Right-click on AU then select New > DWORD (32-bit) value. Name this key as UseWUServer and hit Enter.

4. Now, in the Value data field, enter 0 and click on OK.

change the value of UseWUServer to 0 | Windows Updates Error 0x8024401c Fix

5. Reboot your PC to save changes.

Method 7: Use Google DNS

You can use Google’s DNS instead of the default DNS set by your Internet Service Provider or the network adapter manufacturer. This will ensure that the DNS your browser is using has nothing to do with the YouTube video not loading. To do so,

1. Right-click on the network (LAN) icon in the right end of the taskbar, and click on Open Network & Internet Settings.

Right-click on the Wi-Fi or Ethernet icon then select Open Network & Internet Settings

2. In the settings app that opens, click on Change adapter options in the right pane.

Click Change adapter options

3. Right-click on the network you want to configure, and click on Properties.

Right-click on your Network Connection and then click on Properties

4. Click on Internet Protocol Version 4 (IPv4) in the list and then click on Properties.

Select Internet Protocol Version 4 (TCPIPv4) and again click on the Properties button

Also Read: Fix Your DNS Server might be unavailable error

5. Under the General tab, choose ‘Use the following DNS server addresses’ and put the following DNS addresses.

Preferred DNS Server: 8.8.8.8
Alternate DNS Server: 8.8.4.4

use the following DNS server addresses in IPv4 settings | Windows Updates Error 0x8024401c Fix

6. Finally, click OK at the bottom of the window to save changes.

7. Reboot your PC and once the system restart, see if you’re able to Fix Windows Updates Error 0x8024401c.

Method 8: Perform a Clean Boot

Sometimes 3rd party software can conflict with Windows and can cause Windows Update error. To Fix Windows Updates Error 0x8024401c, you need to perform a clean boot on your PC and diagnose the issue step by step.

Recommended:

That’s it you have successfully Fix Windows Updates Error 0x8024401c but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.

瑛武

About the author

我是一名专业的音频工程师，拥有超过 10 年的经验。我参与过各种各样的项目，从小型家庭音响系统到大型商业制作。我的技能在于创造出色的配乐和声音处理工具，让音乐听起来很棒。我对 Windows 10 也非常有经验，可以帮助您充分利用您的计算机系统。

Windows 更新错误 0x8024401c 修复

Windows 更新错误 0x8024401c(Windows Updates Error 0x8024401c) 修复(Fix)

方法 1：运行 Windows 更新疑难解答(Method 1: Run Windows Update Troubleshooter)

方法 2：运行 SFC 和 CHKDSK(Method 2: Run SFC and CHKDSK)

方法 3：运行 DISM(Method 3: Run DISM)

方法 4：禁用 IPv6(Method 4: Disable IPv6)

方法 5：运行系统还原(Method 5: Run System Restore)

方法 6：注册表修复(Method 6: Registry Fix)

方法 7：使用谷歌 DNS(Method 7: Use Google DNS)

方法 8：执行干净启动(Method 8: Perform a Clean Boot)

Windows Updates Error 0x8024401c Fix

Windows Updates Error 0x8024401c Fix

Method 1: Run Windows Update Troubleshooter

Method 2: Run SFC and CHKDSK

Method 3: Run DISM

Method 4: Disable IPv6

Method 5: Run System Restore

Method 6: Registry Fix

Method 7: Use Google DNS

Method 8: Perform a Clean Boot

瑛 武

About the author

Related posts

Fix Windows 10 Updates Wo不是Install Error

Fix Error 0X80010108在Windows 10中

如何Fix Application Error 0xc0000005

Fix Windows Update Error Code 0x80072efe

如何Fix Application Load Error 5:0000065434

Fix Insufficient System Resources Exist以完成API Error

Fix Error 651：调制解调器（或其他连接设备）报告了错误

Fix DISM Source Files Could未找到Error

Fix Windows Store Cache May Be损坏Error

Fix Windows Update Error 80246008

Fix Office Activation Error Code 0xC004F074

Fix Windows Update Error 0x80080005

Fix Omegle Error Connecting至Server（2021）

Fix Windows 10 Store Error 0x80073cf9

Fix Media Disconnected Error在Windows 10上

Fix Minecraft Error未能Write Core Dump

Device Manager中的Fix Network Adapter Error Code 31

如何Fix Application Error 0xc000007b

Fix BAD_SYSTEM_CONFIG_INFO Error

Fix Windows 10使用Error C1900101-4000D安装Fails

Windows 更新错误 0x8024401c^{(Windows Updates Error 0x8024401c)} 修复^(Fix)

方法 1：运行 Windows 更新疑难解答^{(Method 1: Run Windows Update Troubleshooter)}

方法 2：运行 SFC 和 CHKDSK^{(Method 2: Run SFC and CHKDSK)}

方法 3：运行 DISM^{(Method 3: Run DISM)}

方法 4：禁用 IPv6^{(Method 4: Disable IPv6)}

方法 5：运行系统还原^{(Method 5: Run System Restore)}

方法 6：注册表修复^{(Method 6: Registry Fix)}

方法 7：使用谷歌 DNS^{(Method 7: Use Google DNS)}

方法 8：执行干净启动^{(Method 8: Perform a Clean Boot)}

瑛武