控制中心(Control Center)提供对有用的 watchOS 功能和快捷方式的快速访问。例如，您可以使Apple Watch静音、检查其电池电量(battery level)、对 iPhone 执行 ping 操作，以及从控制中心(Control Center)管理连接。
向上滑动Apple Watch的表面即可打开控制中心(Control Center)。然而，屏幕保护膜、软件错误和手表屏幕上的污垢可以阻止这种情况发生。如果您的Apple Watch(Apple Watch)不响应向上滑动手势，
请尝试以下故障排除修复。
1. 从表盘向上滑动
watchOS控制中心(Control Center)只能从表盘访问。从主(Home)屏幕或应用程序菜单向上滑动不会打开控制中心(Control Center)。
如果您正在使用应用程序，请按数字表冠(Digital Crown)打开主屏幕。(Home)再次按下数码表冠(Digital Crown)打开表盘，然后向上滑动打开控制中心(Control Center)。确保从表盘底部滑动。
2. 取下屏幕保护膜
Apple Watch 配件(Apple Watch accessories)很不错，但有时会干扰触摸输入或交互。如果覆盖屏幕的屏幕保护膜或保护壳太厚或安装/佩戴不正确，
您的Apple Watch可能无法识别滑动手势。(Apple Watch)
使用薄（但坚固）的屏幕保护膜并根据制造商的说明进行安装。如果您的Apple Watch上有保护壳，请确保它不会覆盖屏幕底部。如果您仍然无法向上滑动，
请取下Apple Watch屏幕保护膜和保护壳。(Apple Watch)
3. 清洁或擦干 Apple Watch 的屏幕(Screen)
污垢(Dirt)、灰尘、粘稠物和水/液体可能会干扰Apple Watch上的触摸输入。使用干净、不起毛的超细纤维(microfiber)布擦拭手表的屏幕。您可以用淡水润湿布以去除硬化的粘稠物或颗粒。
使用干燥的非研磨布擦去Apple Watch显示屏上的残留水分，然后尝试再次向上滑动。
4. 禁用水锁
“水锁”功能可防止(Water Lock)Apple Watch在水中佩戴时无意中敲击显示屏。当您冲浪、游泳或开始任何水上锻炼时，watchOS 会自动开启。启用
水锁(Water Lock)后，表盘顶部会出现水滴图标。
如果您的Apple Watch在锻炼后无法向上滑动或无法响应触摸输入，
请禁用Water Lock（按住Digital Crown ）。
5.改变你的表盘
向上滑动手势应在任何表盘(any watch face)上打开控制中心(Control Center)。如果更改或自定义表盘后(changing or customizing your watch face)控制中心(Control Center)无法打开，请尝试不同的表盘并检查是否可以解决问题。
6. 重新启动或强制重新启动您的 Apple Watch(Force Restart Your Apple Watch)
暂时的系统故障或故障可能会导致您的Apple Watch或某些功能出现故障。重新启动Apple Watch并检查(Apple Watch)控制中心(Control Center)是否恢复。
- 按住 Apple Watch 的侧面(Side)按钮 3-5 秒。
- 点击电源菜单右上角的
电源图标。(Power)
- 将(Drag)“关闭电源(Power Off)”滑块拖至右侧，然后等待 10-15 秒，让Apple Watch关闭。
- 按住侧面(Side)按钮 3-5 秒，直到Apple徽标出现在Apple Watch屏幕上。
解锁(Unlock)您的Apple Watch并检查向上滑动表盘是否会打开控制中心(Control Center)。如果问题仍然存在，
请强制重新启动(Force-restart)您的Apple Watch （请参阅步骤 #5）。(Apple Watch)
- 同时按住侧面(Side)按钮和数码表冠(Digital Crown)至少十秒钟。当Apple(Apple)徽标出现在Apple Watch屏幕上时，(Apple Watch)松开(Release)两个按钮。
7.在iPhone(Your)上
使用“Apple Watch Mirroring”
iOS 16 具有“ Apple Watch Mirroring”功能，可让您从 iPhone远程交互/控制Apple Watch 。如果手表的屏幕出现故障或损坏，
您可以从 iPhone 访问控制中心。(Control Center)
注意：Apple Watch 镜像(Apple Watch Mirroring)适用于至少运行 iOS 16 的 iPhone 和运行 watchOS 9 或更高版本的
Apple Watch Series 6 （或更高版本）。(Apple Watch Series 6)
- 打开 iPhone 的“设置”(Settings)应用，选择“辅助功能”(Accessibility)，然后点击“身体和运动”部分中的
Apple Watch Mirroring 。
- 打开Apple Watch Mirroring并等待 iPhone 连接到Apple Watch。
- 轻点Digital Crown即可打开您的Apple Watch表盘。
- 接下来，在表盘上向上滑动以打开控制中心(Control Center)。
- 点按右上角的 X 图标可关闭Apple Watch 镜像(Apple Watch Mirroring)。
8. 更新你的 Apple Watch
如果Apple Watch 的(Apple Watches)软件有问题或过时，那么出现故障是很常见的。检查您的手表设置是否有软件更新并安装最新的 watchOS 版本。
您的Apple Watch仅在充电时才会安装更新。将您的手表(Watch)连接到 Wi-Fi 网络，将其放在充电器上，然后按照以下步骤更新其软件。
转到Settings > General > Software Update，然后点击“下载(Download)并安装”(Install)。将Apple Watch放在充电器上以安装软件更新。
您还可以使用 iPhone更新Apple Watch 。打开手表(Watch)应用程序，在“我的手表(Watch)”选项卡中选择常规(General)，选择软件更新(Software Update)，然后点击下载(Download)并安装(Install)。
下载或安装更新时，请勿关闭Watch应用或重新启动 iPhone。另外，在整个更新安装过程中，请将Apple Watch放在 iPhone 附近。请参阅我们有关更新 Apple Watch 的(updating an Apple Watch)综合指南，了解更多注意事项。
联系苹果
如果Apple Watch(Apple Watch)的屏幕有缺陷或破裂，则可能无法检测到滑动手势。请联系 Apple 支持(Contact Apple Support)或前往附近的Apple Store 零售店(Apple Store)对您的手表进行诊断或维修。
(Apple)如果您有有效的保修或AppleCare计划， (AppleCare)Apple不会收取服务或维修费。了解在没有保修或 AppleCare 的情况下
维修损坏的 Apple Watch 屏幕的费用。(what it costs to repair a broken Apple Watch screen)
Can’t Swipe Up on Your Apple Watch? Try These 8 Fixes
The Control Center provides quick access to useful watchOS features and shortcuts. For example, you can silеnce your Apple Watch, check its battery level, ping your iPhone, and manage connectivity from the Control Center.
Swiping up your Apple Watch’s face should open the Control Center. However, screen protectors, software bugs, and dirt on your watch screen can stop that from happening. Try the troubleshooting fixes below if your Apple Watch doesn’t respond to the swipe up gesture.
1. Swipe Up from the Watch Face
The watchOS Control Center is only accessible from the watch face. Swiping up from the Home screen or app menu won’t open the Control Center.
Press the Digital Crown to open the Home screen if you’re using an app. Press the Digital Crown again to open the watch face, then swipe up to open the Control Center. Ensure you swipe from the bottom of the watch face.
2. Remove the Screen Protector
Apple Watch accessories are nice but sometimes interfere with touch input or interaction. Your Apple Watch may not recognize swipe gestures if a screen protector or case covering the screen is too thick or installed/worn incorrectly.
Use a thin (but strong) screen protector and install it according to the manufacturer’s instructions. If you have a case on your Apple Watch, ensure it doesn’t cover the bottom of the screen. Remove your Apple Watch screen protector and case if you still can’t swipe up.
3. Clean or Dry Your Apple Watch’s Screen
Dirt, dust, gunk, and water/fluid can interfere with touch input on your Apple Watch. Wipe your watch’s screen with a clean and lint-free microfiber cloth. You can dampen the cloth with fresh water to remove hardened gunk or particles.
Use a dry non-abrasive cloth to remove any residual moisture on your Apple Watch display, and try swiping up again.
4. Disable Water Lock
The “Water Lock” feature prevents unintended taps on your Apple Watch display when worn in water. watchOS automatically turns on when you surf, swim, or start any water-based workout. A water drop icon appears at the top of your watch face when Water Lock is enabled.
Disable Water Lock (press and hold the Digital Crown) if your Apple Watch won’t swipe up or respond to touch input after working out.
5. Change Your Watch Face
The swipe-up gesture should open the Control Center on any watch face. If the Control Center won’t open after changing or customizing your watch face, try a different watch face and check if that resolves the issue.
6. Reboot or Force Restart Your Apple Watch
A temporary system glitch or failure could cause your Apple Watch or some features to malfunction. Reboot your Apple Watch and check if that restores the Control Center.
- Press and hold your Apple Watch’s Side button for 3-5 seconds.
- Tap the Power icon in the top-right corner of the power menu.
- Drag the Power Off slider to the right and wait 10-15 seconds for your Apple Watch to shut down.
- Press and hold the Side button for 3-5 seconds until the Apple logo appears on your Apple Watch screen.
Unlock your Apple Watch and check if swiping up the watch face opens the Control Center. Force-restart your Apple Watch (see step #5) if the issue persists.
- Hold the Side button and Digital Crown simultaneously for at least ten seconds. Release both buttons when the Apple logo appears on your Apple Watch screen.
7. Use “Apple Watch Mirroring” on Your iPhone
iOS 16 has an “Apple Watch Mirroring” feature that lets you remotely interact/control your Apple Watch from your iPhone. You can access the Control Center from your iPhone if your watch’s screen is faulty or broken.
Note: Apple Watch Mirroring is available on iPhones running at least iOS 16 and Apple Watch Series 6 (or later) running watchOS 9 or newer.
- Open your iPhone’s Settings app, select Accessibility, and tap Apple Watch Mirroring in the “Physical and Motor” section.
- Toggle on Apple Watch Mirroring and wait for your iPhone to connect to your Apple Watch.
- Tap the Digital Crown to open your Apple Watch face.
- Next, swipe up on the watch face to open the Control Center.
- Tap the X icon in the top-right corner to turn off Apple Watch Mirroring.
8. Update Your Apple Watch
It’s common for Apple Watches with buggy or outdated software to malfunction. Check your watch settings for software updates and install the latest watchOS version.
Your Apple Watch will only install updates when charging. Connect your Watch to a Wi-Fi network, place it on its charger, and follow these steps to update its software.
Go to Settings > General > Software Update and tap Download and Install. Place your Apple Watch on its charger to install the software update.
You can also update your Apple Watch using your iPhone. Open the Watch app, select General in the “My Watch” tab, select Software Update, and tap Download & Install.
Don’t close the Watch app or reboot your iPhone while the update downloads or installs. Also, keep your Apple Watch near your iPhone throughout the update installation. Refer to our comprehensive guide on updating an Apple Watch for more dos and don’ts.
Contact Apple
Your Apple Watch might not detect swipe gestures if its screen is defective or cracked. Contact Apple Support or visit a nearby Apple Store to have your watch diagnosed or repaired.
Apple won’t charge a service or repair fee if you have an active warranty or AppleCare plan. See what it costs to repair a broken Apple Watch screen without a warranty or AppleCare.
