要定期正确更新系统时间^{(system time)}，您可能希望将其与外部网络时间协议 (NTP) 服务器^{(Network Time Protocol (NTP) server)}同步。但有时，您可能会遇到一个错误，指出计算机没有重新同步，因为没有可用的时间数据。在尝试将时间同步到其他时间源时，此错误很常见。因此，请继续阅读以修复计算机没有重新同步，因为^{(the computer did not resync because no time data was available)}您的 Windows PC 上没有时间数据可用错误。

如何修复计算机没有重新同步，因为 Windows 10 上没有可用的时间数据错误
^{(How to Fix The Computer Did Not Resync Because No Time Data Was Available Error on Windows 10 )}

w32tm/resync以同步 Windows 中的日期和时间时，^{(synchronize the date and time in Windows)}您可能会遇到问题。如果时间未正确同步，则可能会导致文件损坏、时间戳不正确、网络问题等问题。要与NTP 服务器^{(NTP server)}同步时间，您需要连接到Internet。以下是发生此错误的一些原因：

• 组策略设置不当
• 错误设置Windows 时间服务参数^{(Windows Time Service parameter)}
• ^{(General issue)}Windows 时间服务^{(Windows Time Service)}的一般问题

方法 1：修改注册表项^{(Method 1: Modify Registry Keys)}

修改注册表项可能有助于解决由于没有时间数据问题而导致计算机未重新同步的^{(the computer did not resync because of the absence of time data)}问题。

注意：^(Note:)修改注册表项时请务必小心，因为更改可能是永久性的，任何不正确的更改都可能导致严重问题。

请按照给定的步骤执行此操作：

1. 同时按Windows + R 键^(keys)打开运行^(Run)对话框。

2.输入regedit并点击OK启动注册表编辑器^{(Registry Editor)}。

3.在用户帐户控制^{(User Account Control)}提示中单击是。^(Yes)

4. 导航到以下位置^(location)：

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters

5. 右键单击​​类型^(Type)字符串并选择修改...^(Modify…)，如下图所示。

注意：^(Note:)如果没有Type string，则创建一个名为Type的字符串。右键单击空白区域^{(empty area)}并选择New > String Value。

6.如图所示，在数值数据：^{(Value data: )}字段下键入NT5DS 。

7. 单击确定^(OK)保存这些更改。

另请阅读：^{(Also Read:)}如何在Windows 11中打开^{(Windows 11)}注册表编辑器^{(Registry Editor)}

方法二：修改本地组策略编辑器^{(Method 2: Modify Local Group Policy Editor)}

与修改注册表项类似，对组策略^{(group policy)}所做的更改也将是永久性的，并且可能修复计算机没有重新同步，因为没有时间数据可用^{(the computer did not resync because no time data was available)}错误。

1. 同时按Windows + R 键^(keys)打开运行^(Run)对话框。

2.输入gpedit.msc 并按Enter 键^{(Enter key)}打开本地组策略编辑器。^{(Local Group Policy Editor.)}

3. 双击Computer Configuration > Administrative Templates将其展开。

4. 现在，双击系统^{(System )}查看文件夹内容，如图所示。

5. 单击Windows 时间服务^{(Windows Time Service)}。

6. 在右窗格中，双击突出显示的全局配置设置^{(Global Configuration Settings)}。

7. 单击未配置^{(Not Configured)}选项并单击应用^{(Apply )}和确定^{(OK )}以保存修改。

8. 现在，双击左窗格中的Time Providers文件夹。

9.在右窗格中为所有三个对象选择未配置选项：^{(Not Configured)}

• 启用 Windows NTP 客户端^{(Enable Windows NTP Client)}
• 配置 Windows NTP 客户端^{(Configure Windows NTP Client)}
• 启用 Windows NTP 服务器^{(Enable Windows NTP Server)}

10. 单击Apply > 确定^{(OK )}以保存此类更改

11.最后，重新启动^(restart) 您的PC^{(your PC)}并检查问题是否已解决。

另请阅读：在^{(Also Read:)} Windows 10 Home上^(Home)安装组策略编辑器^{(Install Group Policy Editor)}(gpedit.msc)

方法三：运行 Windows 时间服务命令^{(Method 3: Run Windows Time Service Command)}

这是解决由于没有时间数据可用错误而未重新同步的计算机^{(the computer that did not resync because no time data was available)}的最佳解决方案之一。

1. 按 Windows 键^{(Windows key)}，键入 命令提示符^{(Command Prompt)} 并单击 以管理员身份运行^{(Run as administrator)}。

2. 在用户帐户控制^{(User Account Control)}提示中，单击是。^(Yes.)

3. 键入以下命令^(command)并按Enter 键^{(Enter key)}运行它：

w32tm /config /manualpeerlist:time.windows.com,0x1 /syncfromflags:manual /reliable:yes /update

现在检查并查看错误是否仍然存在。如果是这样，请遵循任何后续方法。

方法四：重启 Windows 时间服务^{(Method 4: Restart Windows Time Service)}

如果重新启动时间服务^{(Time service)}，任何问题都可以解决。重新启动服务将重新启动整个过程并消除导致此类问题的所有错误，如下所示：

1. 启动 运行^(Run) 对话框，输入 services.msc，然后 按 Enter 键^{(Enter key)}启动服务^(Services)窗口。

2.向下滚动并双击Windows时间^{(Windows Time)}服务以打开其属性^(Properties)

3. 选择 启动类型：^{(Startup type:)} 到 自动^(Automatic)，如下图所示。

 4.如果 服务状态^{(Service status)} 为正在 运行^(Running)，请单击停止^(Stop)。

5. 单击开始^(Start) 按钮更改服务状态：^{(Service status:)}再次运行^(Running)并单击应用^{(Apply )}，然后单击确定^(OK)保存更改。

另请阅读：^{(Also Read:)} Windows 10时钟时间错误^{(Clock Time Wrong)}？这是解决方法！

方法 5：禁用 Windows Defender 防火墙（不推荐）^{(Method 5: Disable Windows Defender Firewall (Not Recommended))}

Windows Defender 防火墙^{(Windows Defender Firewall)}设置中的任何更改也可能导致此问题。

注意：^(Note:)我们不建议禁用Windows Defender，因为它可以保护 PC 免受恶意软件的侵害。您应该只暂时禁用Windows Defender，然后再次重新激活它。

1. 同时按Windows + I keys启动设置^(Settings)。

2. 单击更新和安全^{(Update & Security)}磁贴，如图所示。

3.从左侧窗格中选择Windows 安全。^{(Windows Security)}

4. 现在，单击右窗格中的病毒和威胁防护^{(Virus & threat protection)}。

5. 在Windows 安全^{(Windows Security)}窗口中，单击突出显示的管理设置^{(Manage settings )}。

6.关闭^(Off)实时保护^{(Real-time protection)}的切换栏，然后单击是^(Yes)确认。

常见问题 (FAQ)^{(Frequently Asked Questions (FAQs))}

Q1。由于缺少时间数据而导致计算机未重新同步的问题的主要原因是什么？^{(Q1. What is the main reason for the issue regarding the computer did not resync because of the absence of time data?)}

答。^(Ans.)此错误的主要原因是与 NTP 服务器的系统同步失败。^{(sync failure)}

Q2。是否可以禁用或卸载以解决时间不同步问题？^{(Q2. Is it fine to disable or uninstall to fix the time not syncing issue?)}

答。^(Ans.) 是^(Yes)的，可以经常暂时禁用它，Windows Defender可能会阻止与^{(Windows Defender)}NTP 服务器^{(NTP server)}同步。

推荐的：^{(Recommended:)}

• 如何设置TF2 启动选项分辨率^{(TF2 Launch Options Resolution)}
• 如何在Windows 10上^{(Windows 10)}弹出外置硬盘^{(Eject External Hard Drive)}
• 修复 .NET 运行时优化服务高 CPU 使用率^{(Fix .NET Runtime Optimization Service High CPU Usage)}
• 如何在 Omegle 上解除禁令

我们希望本指南帮助您修复计算机没有重新同步，因为没有时间数据可用^{(the computer did not resync because no time data was available)}错误。让我们知道哪种方法适合您。请随时通过下面的评论部分^{(comment section)}与我们联系，提出您的疑问和建议。

Fix Computer Did Not Resync Because No Time Data was Available

To update system time correctly at regular intervals, you may prefer to synchronize it with an external Network Time Protocol (NTP) server. But sometimes, you may face an error stating that the computer did not resync because there was no time data available. This error is quite common while trying to synchronize time to other time sources. So, continue reading to fix the computer did not resync because no time data was available error on your Windows PC.

How to Fix The Computer Did Not Resync Because No Time Data Was Available Error on Windows 10

You may be facing an issue while running the command w32tm/resync to synchronize the date and time in Windows. If the time is not synchronized properly, then this may lead to problems such as corrupt files, incorrect timestamps, network issues, and a few others. To synchronize time with NTP server, you need to be connected to the Internet. Here are some reasons for this error to occur:

• Improperly set Group Policy
• Incorrectly set Windows Time Service parameter
• General issue with Windows Time Service

Method 1: Modify Registry Keys

Modifying registry keys might help resolve the computer did not resync because of the absence of time data issue.

Note: Always be cautious when you modify registry keys as the changes may be permanent, and any incorrect changes may lead to serious issues.

Follow the given steps to do so:

1. Press Windows + R keys simultaneously to open Run dialog box.

2. Type regedit and click on OK to launch Registry Editor.

3. Click on Yes in the User Account Control prompt.

4. Navigate to the following location:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters

5. Right-click on the Type string and choose Modify… as illustrated below.

Note: If there is no Type string, then create a string with the name Type. Right-click on the empty area and choose New > String Value.

6. Type NT5DS under the Value data: field as shown.

7. Click on OK to save these changes.

Also Read: How to Open Registry Editor in Windows 11

Method 2: Modify Local Group Policy Editor

Similar to modifying registry keys, the changes made to group policy will also be permanent and possibly, fix the computer did not resync because no time data was available error.

1. Press Windows + R keys simultaneously to open Run dialog box.

2. Type gpedit.msc and press Enter key to open Local Group Policy Editor.

3. Double-click on Computer Configuration > Administrative Templates to expand it.

4. Now, double-click on System to view the folder contents, as shown.

5. Click on Windows Time Service.

6. In the right pane, double-click on Global Configuration Settings shown highlighted.

7. Click on the option Not Configured and click on Apply and OK to save the modification.

8. Now, double-click on Time Providers folder in the left pane.

9. Choose the option Not Configured for all three objects in the right pane:

• Enable Windows NTP Client
• Configure Windows NTP Client
• Enable Windows NTP Server

10. Click on Apply > OK to save such changes

11. Finally, restart your PC and check if the issue is fixed or not.

Also Read: Install Group Policy Editor (gpedit.msc) on Windows 10 Home

Method 3: Run Windows Time Service Command

It is one of the best solutions to resolve the computer that did not resync because no time data was available error.

1. Hit the Windows key, type Command Prompt and click on Run as administrator.

2. In the User Account Control prompt, click on Yes.

3. Type the following command and hit the Enter key to run it:

w32tm /config /manualpeerlist:time.windows.com,0x1 /syncfromflags:manual /reliable:yes /update

Now check and see if the error persists. If it does, then follow any of the succeeding methods.

Method 4: Restart Windows Time Service

Any issue can be resolved if the Time service is restarted. Restarting a service will restart the entire process and eliminate all the bugs which cause such issues, as follows:

1. Launch the Run dialog box, type services.msc, and hit Enter key to launch Services window.

2. Scroll down and double-click on Windows Time service to open its Properties

3. Select Startup type: to Automatic, as depicted below.

4. Click on Stop if the Service status is Running.

5. Click on the Start button to change Service status: to Running again and click on Apply then, OK to save changes.

Also Read: Windows 10 Clock Time Wrong? Here is how to fix it!

Method 5: Disable Windows Defender Firewall (Not Recommended)

Any changes in the Windows Defender Firewall settings might also cause this issue.

Note: We do not recommend disabling Windows Defender as it protects the PC from malware. You should only disable Windows Defender temporarily and then, reactivate it once again.

1. Press Windows + I keys simultaneously to launch Settings.

2. Click on the Update & Security tile, as shown.

3. Select Windows Security from the left pane.

4. Now, click Virus & threat protection in the right pane.

5. In the Windows Security window, click on Manage settings shown highlighted.

6. Switch Off the toggle bar for Real-time protection and click Yes to confirm.

Frequently Asked Questions (FAQs)

Q1. What is the main reason for the issue regarding the computer did not resync because of the absence of time data?

Ans. The main cause of this error is due to system sync failure with the NTP server.

Q2. Is it fine to disable or uninstall to fix the time not syncing issue?

Ans. Yes, it is fine to disable it temporarily as often, Windows Defender might block syncing with the NTP server.

Recommended:

• How to Set TF2 Launch Options Resolution
• How to Eject External Hard Drive on Windows 10
• Fix .NET Runtime Optimization Service High CPU Usage
• How to Get Unbanned on Omegle

We hope that this guide helped you to fix the computer did not resync because no time data was available error. Let us know which method worked for you. Feel free to reach out to us with your queries and suggestions via comment section below.

Related posts

• Fix Computer直到重新启动多次

• Fix Computer无法识别iPhone

• Fix Computer Wo在Windows 10中没有转到Sleep Mode

• Fix Windows Computer重新启动而不警告

• 当USB device插入时，Fix Computer关闭

• Fix BAD_SYSTEM_CONFIG_INFO Error

• Fix Windows Time Service不工作

• 如何在Windows 10上Fix Mouse Lag（Increase Mouse Response Time）

• Fix Windows 10 Taskbar未隐藏

• Fix Windows 7更新未下载

• 如何Fix Application Load Error 5:0000065434

• 如何播放Fix Firefox（2021）

• Fix Your Computer有一个Memory problem

• Fix Windows无法与device or resource通信

• 7 Ways至Fix Computer Keeps Crashing

• Getting Windows Ready上的Fix PC Stuck，不要关闭Computer

• 如何在Windows上打开Fix Avast

• Fix High CPU Usage Service Host：本地系统

• 在 Windows 11 中修复 Halo Infinite No Ping 到我们的数据中心错误

• Fix Error 0X80010108在Windows 10中