Windows 11于2021 年 10 月(October 2021)在全球发布,存在大量错误和错误。这在新操作系统中最为明显,尤其是仍处于测试阶段(testing phase)的驱动程序。最近,很多用户一直在抱怨Realtek音频控制台在Windows 11中没有增强耳机、扬声器和其他此类设备的耳机虚拟化、响度均衡等音频。(headphone virtualization)因此,今天我们带来了一份完美的指南,可以帮助您修复在Windows 11中无法正常工作的(Windows 11)Realtek音频控制台。
如何修复 Realtek 音频控制台在 Windows 11 中不起作用(How to Fix Realtek Audio Console Not Working in Windows 11)
(Realtek Audio console)在人们升级到Windows 11并且在Windows 10中不存在之后, (Windows 10)Realtek 音频控制台无法正常工作的问题已经上升。尽管微软(Though Microsoft)一直在努力改进Windows 11,但与初始版本相比,最新版本已经获得了很大的稳定性。但是,您可能仍然面临上述问题。可能有很多原因会导致Realtek音频控制台出现问题,下面列出了一些这样的原因,以便您了解情况;
- 损坏的外围设备或过时的设备
- 设备连接(Connectivity)问题,电缆线损坏
- 特定设备的驱动程序损坏或过时
- 由于存在干扰后台进程(background process)的不需要的应用程序,音频设置管理不善或驱动程序安装中断(driver installation)
- 系统机柜端的连接松动无法完成电路。
- 错误地将电缆插入不正确的端口
通常,这些原因之一可能会导致Realtek音频控制台无法在Windows 11上正常运行问题。为了纠正这些,让我们继续使用方法
方法一:基本硬件故障排除(Method 1: Basic Hardware Troubleshooting)
从最基本的开始,检查您插入的设备的连接性。按照给定的点进行操作。
- 前往您的系统机柜或扩展坞板(dock board),检查连接是否正确(check if the connections are done properly)。
-
如果是这样,解开并重新连接电线( Untangle and reconnect the wire),可能会使电缆拉紧。
- 此外,请检查您的系统是否出现静音或低电平音频(check your system in case of muted or low leveled audio),这是由某些应用程序完成的,以优化系统以获得舒适的听觉体验。
-
( Plugging out and reconnecting the device)还应执行拔出并重新连接设备以进行验证。
此方法可以解决外围设备连接的基本问题,但如果不是这种情况,请继续执行下一个方法。
方法 2:运行播放音频疑难解答(Method 2: Run Playing Audio Troubleshooter)
音频故障排除有时可能会解决系统上音频的所有持续性问题。要试用它们,请按照下列步骤操作:
1. 单击搜索图标(Search icon),键入疑难解答设置(troubleshoot settings),然后单击打开(Open)。
2. 在这里,单击疑难解答选项(Troubleshooting options)下的其他疑难解答(Other troubleshooters )。
3.找到播放音频(Playing Audio ),然后单击右侧的运行以启动疑难解答。(Run )
4. 现在,选择Realtek 音频设备(Realtek audio device)并单击下一步(Next) 按钮。
5.等待(Wait)故障排除程序检测到问题。
6. 如果出现故障排除人员指示的任何问题,请应用修复程序。(Apply the fix)
7.修改后重启(Restart )电脑。
打开您的音频控制台并选择您的设置以检查音频是否解决了Realtek音频控制台的问题。
另请阅读:(Also Read:) 修复(Fix Low Microphone Volume)Windows 11中的低麦克风音量
方法 3:设置默认音频设备(Method 3: Set Default Audio Device)
多个音频设备有时会导致行为不端,从而可能导致Realtek音频控制台无法增强音频。按照以下步骤将您的特定音频输入/输出设置为系统的默认设备(default device)。
1. 右键单击 任务栏(Taskbar) 溢出部分 中的扬声器图标(speaker icon) , 然后选择声音设置(Sound settings),如下图所示。
2. 单击 高级 (Advanced )部分 下 的更多(More) 声音(sound) 设置。(settings)
3. 单击声音(Sound)窗口上的播放(Playback )选项卡。
4. 在列表中找到Realtek 音频设备(Realtek audio device),单击它并选择下面的设置默认(Set default )选项。
5. 单击Apply > OK 以保存更改并关闭窗口。
打开控制台,设置您想要的设置,如果这个固定的Realtek音频控制台没有增强音频,请检查音频。如果这没有解决,请继续下一个方法。
方法 4:验证音频输出(Method 4: Verify the Audio Output)
这听起来很傻,但如果您连接了多个音频输出,确认正确的音频输出同样重要。有时,通过忽略这些小细节来优化音频设备的反复失败尝试会让您在几个小时内无法获得所需的音频输出。为了验证这一点,
1. 点击搜索图标(search icon),输入Realtek audio console,然后点击打开(Open)。
2. 在左侧窗格中,单击所列设备的Realtek HD 音频输出。(Realtek HD Audio output )
3. 现在对设备进行所需的音频更改( make the desired audio changes)并关闭应用程序。
4.然后,在控制台中选择所需的设置后播放任何随机音乐(play any random music),并检查问题是否仍然存在。如果这不起作用,请继续下一个方法。
另请阅读:(Also Read:)如何使用键盘快捷键关闭 Windows 11(Off Windows 11) 摄像头和麦克风(Camera and Microphone Using Keyboard Shortcut)
方法 5:更改 Realtek 音频设备格式(Method 5: Change Realtek Audio Device Format)
通过选择Windows(Windows)中可用的最佳录音室质量(studio quality)来解决此问题,可以建议提高音频输出的音质。(sound quality)为此,请按照以下简单步骤操作:
1. 导航至Sound settings > More sound settings > Sound窗口,如方法 3(Method 3)所示。
2. 右键单击 Realtek 音频设备(Realtek audio device )并选择属性。(Properties.)
3. 单击高级选项卡并选择(Advanced )默认格式(Default format.)下的下拉菜单。
4. 然后,从下拉选项中选择2 通道、24 位、192000 Hz(工作室质量) 。(2 channel, 24 bit, 192000 Hz (Studio Quality))
5. 单击Apply > 确定(OK )以保存更改。
检查音频控制台上的设置并播放任何音频以检查Realtek音频控制台未增强音频是否已修复。
方法 6:重新安装音频服务(Method 6: Reinstall Audio Service)
以下是重新安装音频服务以修复Realtek音频控制台未增强Windows 11上的音频问题的步骤。
1. 点击搜索图标(Search icon),输入服务(services),然后点击打开(Open)。
2. 在服务(Services)窗口中,向下滚动前面的列表以找到Windows 音频(Windows Audio )服务并检查其状态(Status )选项卡。
3A。如果状态(Status)选项卡显示已停止,(Stopped, )则单击Windows 音频(Windows Audio)部分的开始(Start )选项。
3B。如果Status选项卡显示Running,请单击Restart选项,如下图所示。
4. 现在,通过重复上述步骤也(steps)重新启动(restart)以下服务(services)。
- Windows 音频端点生成器(Windows Audio Endpoint Builder)
- 远程过程调用(Remote Procedure Call)
另请阅读:(Also Read:)在Windows 11中阻止Spotify在(Spotify From)启动(Startup)时打开的3种方法(Ways)
方法 7:更新音频驱动程序(Method 7: Update Audio Driver)
音频驱动程序(audio driver)的未决更新将限制与其相关的其他应用程序的进一步工作。要检查这一点,请按照下列步骤操作:
1. 点击搜索图标(Search icon),输入设备管理器(device manager),然后点击打开(Open)。
2. 双击 音频输入和输出 (Audio inputs and outputs )以展开并查看已安装的驱动程序。
3. 右键单击您的 音频驱动程序(audio driver)并选择 更新驱动程序(Update driver) 选项。
4. 单击 自动搜索驱动程序 (Search automatically for drivers )以自动下载和更新驱动程序。
5A。如果有任何更新可用, Windows 将下载并安装(Windows will download and install) 它们。
5B。如果您的驱动程序已更新,您将收到消息 The best drivers for your device are already installed。单击在Windows 更新 选项上搜索更新的驱动程序。(search for updated drivers on Windows Update)
6. 然后,在Windows Update菜单的右窗格中选择高级(Advanced) 选项。(options)
7. 单击其他(Additional) 选项下 的可选(Optional) 更新(updates)选项(options)。
8. 如果有任何可用的更新,它们将在此处列出。找到音频驱动程序更新(audio driver update) 并选中它旁边的框。
9. 然后,点击下载并安装(Download & install)。
10. 最后,安装更新后重新启动您的 PC 。(restart your PC)
方法 8:重新安装音频驱动程序(Method 8: Reinstall Audio Driver)
如果所有这些方法都不起作用(t work),则可能是安装的驱动程序有问题,重新安装将修复Realtek音频控制台在Windows 11中无法增强音频的问题。为此,请按照下列步骤操作:
1. 点击 搜索图标(Search icon),输入 设备管理器(device manager) 并点击 打开(Open)。
2. 在设备管理器窗口(device manager window)中,双击 音频输入和输出(Audio inputs and outputs) 将其展开。
3. 右键单击 音频驱动程序(audio driver),然后 从上下文菜单中 单击 卸载(Uninstall) 设备。(device)
4. 在 卸载设备(Uninstall Device) 确认提示中,单击 卸载(Uninstall)。
5. 然后, 重新启动(restart) 您的电脑(your PC)。
6.从官网(official website)下载最新的Realtek声卡驱动(audio driver)。
注意:(Note: )您还可以从Intel 驱动程序和支持助手(Intel Driver and Support Assistant)页面为您的系统选择兼容的驱动程序。
7. 转到您下载驱动程序设置文件(driver setup file)的位置。
8A。如果下载的文件是可执行的,请双击 .exe 文件( .exe file) 并按照 屏幕上的说明在(on-screen instructions)Windows 11上安装Realtek音频驱动程序。
8B。如果下载的文件是.zip 或 .rar等格式,请使用7Zip 或 WinRAR等 存档提取应用程序。(extraction application) 解压存档内容后,双击可执行 安装文件(setup file) 并安装驱动程序。
现在,检查Realtek音频控制台是否正常工作。
另请阅读:(Also Read:)如何修复 Windows 11(Fix Windows 11) 网络摄像头(Webcam)不工作
方法 9:执行系统还原(Method 9: Perform System Restore)
如果上述方法均无法修复Realtek音频控制台无法在Windows 11上运行的问题。然后,您应该将系统恢复到问题不存在时的状态。按照以下步骤执行系统重置(System resote)。
1. 点击 搜索图标(Search icon),输入 控制面板(Control Panel) 并点击 打开(Open)。
2. 设置 View by: > Large icons 并单击 恢复 (Recovery )选项,如图所示。
3. 然后,单击 打开(Open) 系统(System) 还原(Restore)。
4A。现在,选择 “推荐还原(Recommended restore)”,然后 在“ 系统还原”(System Restore) 窗口中 选择 “下一步”。(Next)然后,单击 下一步。(Next.)
4B。或者,您可以手动 选择不同的还原点(Choose a different restore point)。然后,选择最新的还原点(restore point)将您的计算机还原到您没有遇到问题的点。单击(Click)下一步(Next.)。
注意:(Note:) 您可以单击 扫描受影响的程序以查看将计算机还原到之前设置的(Scan for affected programs)还原点(restore point) 会受到影响的应用程序列表。单击(Click)关闭(Close)以 关闭新打开的窗口。
5. 最后,点击 完成(Finish) 开始 系统还原(System Restore)。
推荐的:(Recommended:)
- 如何修复 Firefox(Fix Firefox)不加载(Loading)页面
- 如何查找某人的亚马逊愿望清单(Amazon Wish List)
- 如何修复(Fix Audio Buzzing)Windows 11中的音频嗡嗡声
- 如何在Windows 11中创建(Windows 11)还原点上下文菜单(Restore Point Context Menu)
通过本文,我们希望您能够修复Realtek 音频控制台无法在 Windows 11(Realtek audio console not working in Windows 11)中运行的问题。其中一些方法对于该问题是可行的,请在下面的评论部分(comment section)告诉我们哪些方法适合您,以及是否有进一步的疑问。
Fix Realtek Audio Console Not Working in Windows 11
Windows 11 was rеleased in October 2021 worldwide with a lot of bugs and errors. Τhis is most evident with the new OS, especially the drivers who are still in the testing phase. Recently many users have been complaining about Realtek audio console not enhancing audio іn Windows 11 likе headphone vіrtualization, loudness equalіzation, etc. for headphones, speakers, and other sυch devices. So, today we bring а perfect guide that will help you to fix Realtek audio console not working in Windows 11.
How to Fix Realtek Audio Console Not Working in Windows 11
Realtek Audio console not working issue have risen after people upgraded to Windows 11 and weren’t there in Windows 10. Though Microsoft has been constantly working on improving Windows 11 and the recent version has attained much stability as compared to initial versions. However, you may still face the said issue. There can be a lot of reasons which can lead to problems with the Realtek audio console, a handful of such reasons are listed down as follows for you to get an idea about the scenario;
- Damaged peripherals or outdated devices
- Connectivity issues with the device, damaged cable wires
- Drivers corrupt or outdated for the specific device
- Mismanaged audio settings or disruption in driver installation due to the presence of an unwanted application interfering with the background process
- Loose connection at the cabinet end of the system failing to complete the circuit.
- Wrongly inserted cables to incorrect ports
Usually, one of these reasons may be causing Realtek audio console not working on Windows 11 properly problem. To rectify these, let’s move forward with the methods
Method 1: Basic Hardware Troubleshooting
To start from the very basic, check the connectivity of the devices you’ve plugged in. Follow the given points to do so.
- Go to the cabinet of your system or the dock board and check if the connections are done properly.
-
Untangle and reconnect the wire if so, might be straining the cables.
- Also, check your system in case of muted or low leveled audio which is done by some applications to optimize the system for comfortable hearing experiences.
-
Plugging out and reconnecting the device should also be performed to verify.
This method could fix the basic issues with the connectivity of the peripherals, but if this wasn’t the case, proceed to the next method.
Method 2: Run Playing Audio Troubleshooter
Troubleshooting the audio might sometimes fix all the persistent problems with the audio on the system. To try them out, follow these steps:
1. Click on the Search icon, type troubleshoot settings, and click on Open.
2. Here, click on Other troubleshooters under the Troubleshooting options.
3. Locate Playing Audio and click on Run on the right to start the troubleshooter.
4. Now, select the Realtek audio device and click on the Next button.
5. Wait for the troubleshooter to detect the problems.
6. Apply the fix if there are any issues as instructed by the troubleshooter.
7. Restart the PC after making changes.
Open your audio console and choose your settings to check the audio whether the issue of Realtek audio console is not working got fixed.
Also Read: Fix Low Microphone Volume in Windows 11
Method 3: Set Default Audio Device
Multiple audio devices can sometimes lead to misbehavior, thus might lead to Realtek audio console not enhancing audio. Follow these steps to set your specific audio input/output as a default device for your system.
1. Right-click on the speaker icon in the Taskbar overflow section and select Sound settings, as illustrated below.
2. Click on More sound settings under Advanced section.
3. Click on the Playback tab on the Sound window.
4. Locate Realtek audio device in the list, click on it and choose Set default options below.
5. Click on Apply > OK to save changes and close the window.
Open the console, set your desired settings, and check the audio too if this fixed Realtek audio console not enhancing audio. If this didn’t solve, proceed to the next method.
Method 4: Verify the Audio Output
This can sound silly but confirming the correct audio output can be equally important in case you’ve multiple audio outputs connected. Sometimes repeated failed attempts of optimizing the audio device by overlooking these little details keep you struck for hours not leading you to the desired audio outputs. To verify this,
1. Click on the search icon, type Realtek audio console, and click on Open.
2. On the left pane, click on Realtek HD Audio output from the listed devices.
3. Now make the desired audio changes for the device and close the application.
4. Then, play any random music after choosing your desired settings in the console and check if still the issue remains. If this didn’t work, proceed with the next method.
Also Read: How to Turn Off Windows 11 Camera and Microphone Using Keyboard Shortcut
Method 5: Change Realtek Audio Device Format
Improving the sound quality for the audio output can be advised by choosing the best studio quality available in Windows to cure this problem. To do so, follow these simple steps:
1. Navigate to Sound settings > More sound settings > Sound window as shown in Method 3.
2. Right-click on Realtek audio device and select Properties.
3. Click on the Advanced tab and select the drop-down menu under the Default format.
4. Then, select the 2 channel, 24 bit, 192000 Hz (Studio Quality) from the dropdown options.
5. Click on Apply > OK to save changes.
Check the settings on the audio console and play any audio to check if Realtek audio console not enhancing audio is fixed.
Method 6: Reinstall Audio Service
Here are the steps to reinstall audio service to fix Realtek audio console not enhancing audio on Windows 11 problem.
1. Click on the Search icon, type services, and click on Open.
2. On the Services window, scroll down the list in front to locate the Windows Audio service and check its Status tab.
3A. If the Status tab says Stopped, then click on the Start option on the Windows Audio section.
3B. If the Status tab says Running, click on the Restart option as highlighted in the given pic below.
4. Now, restart the following services too by repeating the above steps.
- Windows Audio Endpoint Builder
- Remote Procedure Call
Also Read: 3 Ways to Stop Spotify From Opening on Startup in Windows 11
Method 7: Update Audio Driver
A pending update for the audio driver would restrict further work by other applications related to it. To check this, follow these steps:
1. Click on the Search icon, type device manager, and click on Open.
2. Double click on Audio inputs and outputs to expand and view the installed drivers.
3. Right-click on your audio driver and select the Update driver option.
4. Click on Search automatically for drivers to download and update the driver automatically.
5A. If any updates are available, then Windows will download and install them.
5B. If your driver is updated then, you will receive the message The best drivers for your device are already installed. Click on the search for updated drivers on Windows Update option.
6. Then, select Advanced options in the right pane of the Windows Update menu.
7. Click on the Optional updates option under Additional options.
8. If there are any updates available then, they will be listed here. Find the audio driver update and check the box next to it.
9. Then, click on Download & install.
10. Finally, restart your PC after installing the updates.
Method 8: Reinstall Audio Driver
If all these methods didn’t work, the installed drivers might be the problem, and reinstalling would fix Realtek audio console not enhancing audio in Windows 11 problem. To do this, follow these steps:
1. Click on the Search icon, type device manager and click Open.
2. In the device manager window, double click on Audio inputs and outputs to expand it.
3. Right-click on audio driver and click on Uninstall device from the context menu.
4. In the Uninstall Device confirmation prompt, click on Uninstall.
5. Then, restart your PC.
6. Download the latest Realtek audio driver from the official website.
Note: You can also select the compatible driver for your system from the Intel Driver and Support Assistant page.
7. Go to the location where you downloaded the driver setup file.
8A. In case the downloaded file is executable, double click on .exe file and follow the on-screen instructions to install Realtek audio driver on Windows 11.
8B. If the downloaded file is in formats like .zip or .rar, use an archive extraction application like 7Zip or WinRAR. After extracting the contents of the archive, double-click on the executable setup file and install the driver.
Now, check Realtek audio console is working or not.
Also Read: How to Fix Windows 11 Webcam Not Working
Method 9: Perform System Restore
If none of the above methods fix Realtek audio console not working on Windows 11 problem. Then, you should restore your system back to when the issue did not exist. Follow these steps to perform a System resote.
1. Click on the Search icon, type Control Panel and click on Open.
2. Set View by: > Large icons and click on the Recovery option, as depicted.
3. Then, click on Open System Restore.
4A. Now, choose Recommended restore and select Next in the System Restore window. And, click on Next.
4B. Alternatively, you can manually Choose a different restore point. Then, select latest restore point to restore your computer to the point when you were not facing the issue. Click on Next.
Note: You can click on Scan for affected programs to see the list of applications that will be affected by restoring the computer to the previously set restore point. Click on Close to close the newly opened window.
5. Finally, click on Finish to start the System Restore.
Recommended:
With this article, we hope you were able to fix Realtek audio console not working in Windows 11. A couple of these methods are feasible for the issue, tell us in the comment section below which of these methods work for you and if there are further queries.