如今，在Windows 10 PC 上，蓝牙(Bluetooth)外围设备问题非常典型。缺少通用蓝牙驱动程序(Generic Bluetooth Driver)是我们刚刚遇到的此类问题之一。将蓝牙(Bluetooth)扬声器、键盘或鼠标连接到Windows 10电脑时，可能会出现蓝牙(Bluetooth)驱动程序问题。您的 PC 上缺少通用蓝牙(Bluetooth)驱动程序可能是由于待定的Windows 10升级或驱动程序损坏。这个问题可能是由于过时的设备驱动程序被隐藏或系统文件错误而引起的。下载(Download)并安装最新的 CU。这个反复出现的问题可以通过运行蓝牙(Bluetooth)疑难解答，卸载并重新安装蓝牙(Bluetooth)驱动程序，以及使用系统文件修复工具（SFC/DISM）。今天，在这篇文章中，我们将研究导致蓝牙驱动程序错误 Windows 10(Bluetooth Driver Error Windows 10)问题的一些可能原因，以及一些潜在的补救措施。按照解决Windows 10中(Windows 10)蓝牙(Bluetooth)驱动程序问题的方法。
如何修复 Windows 10 中的蓝牙驱动程序错误(How to Fix Bluetooth Driver Error in Windows 10)
如果您无法将蓝牙(Bluetooth)设备连接到Windows ，则可以想象您没有完全遵循配对步骤。因为有时配对这些设备可能很棘手，请仔细按照说明进行操作。在开始之前，请确保您已按下他们的配对按钮并且该小工具处于配对模式。如果您不这样做，蓝牙(Bluetooth)将无法识别您计算机上的设备。建立蓝牙连接时(Bluetooth)出错(Error)可能还有其他解释，但这些方法将帮助您解决蓝牙驱动程序错误(Bluetooth Driver Error)Windows 10 的问题。
初步检查(Preliminary Checks)
在执行故障排除方法之前，请遵循给定的初步检查。
第 1 步：确保蓝牙已打开(Step 1: Ensure Bluetooth is Turned On)
下面的方法将演示如何检查您的蓝牙(Bluetooth)是否已打开：
1. 同时按下Windows + I keys 打开 设置(Settings)。
2. 选择设备(Devices)选项卡。
3.选择蓝牙(Bluetooth) 和其他设备(and other devices)。
4. 确保蓝牙(Bluetooth)已开启(On)。
第 2 步：关闭飞机(Step 2: Turn Off Airplane)
要修复Windows 10中的(Windows 10)蓝牙(Bluetooth)驱动程序错误，请确保已打开飞行模式。(Airplane)如果是这种情况，请在尝试连接到您的蓝牙(Bluetooth)设备之前禁用它。要关闭飞行(Airplane)模式，请按笔记本电脑键盘上的按钮或按照以下说明操作：
1. 同时按下Windows + I keys 打开设置(Settings)。
2. 选择网络和互联网(Network & Internet)。
3. 单击飞行模式(Airplane mode)并确保切换开关已关闭(Off)。
第 3 步：检查您的蓝牙设备是否工作正常(Step 3: Check if your Bluetooth Device Is Working Fine)
(Bluetooth)部分设备默认开启蓝牙，当您在另一台设备上开启蓝牙(Bluetooth)时，会提示您连接。如果它不起作用，请尝试：
- 在继续使用之前关闭设备几秒钟。
- 确保(Make)小工具在蓝牙(Bluetooth)范围内。
- 让您的蓝牙(Bluetooth)设备远离未受保护的USB设备。因此，您的连接可能会受到阻碍。
- 如果您的小工具工作正常，请尝试重新连接。
我们已经展示了以下步骤来检查蓝牙(Bluetooth)设备
Windows + I键(keys)启动Windows 设置(Windows Settings)菜单。
2. 点击设备(Devices)。
3. 查找导致问题的设备(device)，单击它，然后选择删除设备并单击(Remove Device)是(Yes)确认删除。
4. 点击蓝牙和其他设备(Bluetooth & other devices)设置。
5. 点击添加蓝牙或其他设备(Add Bluetooth or another device)。
6. 点击蓝牙(Bluetooth)。允许您的系统寻找兼容的设备。
7. 单击您要连接的设备。
另请阅读：(Also Read:) 如何在 Windows 10 上安装蓝牙(How to Install Bluetooth on Windows 10)
方法一：运行蓝牙疑难解答(Method 1: Run Bluetooth Troubleshooter)
(Use) 如果上述方法均无效，请使用Windows 10内置的蓝牙调试工具。(Bluetooth)Windows 10有几个旨在解决内部问题的内置疑难解答程序。
1. 同时按Windows + I keys 启动 设置(Settings)。
2. 选择更新和安全(Update & Security)。
3.从左侧窗格中选择疑难解答。(Troubleshoot )
4. 向下滚动并单击其他疑难解答(Additional Troubleshooters)。
5. 单击蓝牙(Bluetooth)并选择运行疑难解答(Run the troubleshooter)。
6. 故障排除完成后重启设备(device)，看能否访问通用蓝牙(Bluetooth)驱动。
方法 2：更新驱动程序(Method 2: Update Drivers)
更新驱动程序是可以修复Windows 10中的修复(Windows 10)蓝牙(Bluetooth)驱动程序错误的一种方法。你可能已经读过它一百万次了，但它可能很有用。因此，如果您的驱动程序尚未通过 Windows(updated through Windows) Update 更新，请转到设备管理器(Device Manager)并手动下载适用于您的蓝牙(Bluetooth)设备的最新驱动程序。
1. 点击Windows 键( Windows key)，输入设备管理器(Device Manager)并点击打开(Open)。
2.双击蓝牙(Bluetooth )将其展开。
3. 右键单击通用蓝牙适配器(Generic Bluetooth Adapter)。选择更新驱动程序。(Update driver.)
4. 单击自动搜索驱动程序(Search automatically for drivers)。
Windows将找到 蓝牙驱动程序。(Bluetooth driver)
另请阅读：(Also Read:) 如何在 Windows 10 上重命名蓝牙设备(How to Rename Bluetooth Devices on Windows 10)
方法 3：运行 SFC 和 DISM 扫描(Method 3: Run SFC and DISM Scans)
快速的电源波动可能会导致系统组件损坏，从而导致错误，例如缺少通用蓝牙(Generic Bluetooth)驱动程序。如果是这种情况，请使用系统文件检查器实用工具来帮助您。(system file)以下是必须采取的步骤：
1. 按 Windows 键(Windows key)，键入 命令提示符(Command Prompt) 并单击 以管理员身份运行(Run as administrator)。
2.在 用户帐户控制(User Account Control) 提示中单击 是。(Yes)
3. 键入 sfc /scannow 并按 Enter 键(Enter key) 运行 系统文件检查器(System File Checker) 扫描。
注意：(Note:) 系统扫描将启动，需要几分钟才能完成。同时，您可以继续执行其他活动，但请注意不要意外关闭窗口。
完成扫描后，它将显示以下任一消息：
- Windows 资源保护未发现任何完整性违规。(Windows Resource Protection did not find any integrity violations.)
- Windows 资源保护无法执行请求的操作。(Windows Resource Protection could not perform the requested operation.)
- Windows 资源保护发现损坏的文件并成功修复它们。(Windows Resource Protection found corrupt files and successfully repaired them.)
- Windows 资源保护发现损坏的文件，但无法修复其中一些。(Windows Resource Protection found corrupt files but was unable to fix some of them.)
4. 扫描完成后， 重新启动(restart) 您的电脑(your PC)。
5. 再次 以管理员身份启动命令提示符(Command Prompt as administrator) 并依次执行给定的命令：
dism.exe /Online /cleanup-image /scanhealth
dism.exe /Online /cleanup-image /restorehealth
dism.exe /Online /cleanup-image /startcomponentcleanup
注意：(Note:) 您必须具有有效的 Internet 连接才能正确执行DISM命令。
方法 4：更新 Windows
如果有已卸载的Windows 10更新，可能会出现类似问题。即使情况并非如此，保持操作系统(operating system)最新可以消除一系列缺陷和问题。因此，我们建议您按照以下说明在您的设备上下载并安装最新的安全补丁：
1. 同时按Windows + R keys打开 设置(Settings)。
2. 点击更新和安全(Update & Security)。
3. 单击检查更新(Check for Updates)。
4A。单击立即安装(Install now)以下载并安装可用的最新更新。
4B。如果您的系统已经是最新的，那么它将显示您是最新的(You’re up to date)消息。
另请阅读：(Also Read:) 如何修复 Windows 10 中的蓝牙问题(How to Fix Bluetooth problems in Windows 10)
方法 5：更新隐藏的驱动程序(Method 5: Update Hidden Drivers)
在这种情况下，系统无法检测到某些硬件驱动程序，因为它们被隐藏，导致缺少通用蓝牙驱动程序(Missing Generic Bluetooth Driver)错误。以下是查找和更新隐藏驱动程序的方法。
1. 点击Windows 键( Windows key)，输入设备管理器(Device Manager)并点击打开(Open)。
2. 选择查看(View)并点击显示隐藏设备(Show hidden devices)。
3. 这将在当前窗口中显示所有隐藏的驱动程序。(hidden drivers)双击展开蓝牙(Bluetooth)。
4. 右键单击隐藏的设备驱动程序并选择更新驱动程序(Update driver)。
方法 6：重新安装驱动程序(Reinstall Drivers)
如果现有设备驱动程序已损坏，也可能会出现Windows 10问题中的修复蓝牙(Bluetooth)驱动程序错误。要解决蓝牙驱动程序错误 Windows 10(Bluetooth Driver Error Windows 10)的问题，请访问制造商的网站并下载/安装必要的驱动程序。以下是如何开始：
1. 点击Windows 键( Windows key)，输入设备管理器(Device Manager)并点击打开(Open)。
2. 双击蓝牙(Bluetooth)展开。
3. 右键单击您的蓝牙适配器(Bluetooth Adapter)。点击(Click)卸载(Uninstall) 设备(device)。_
4. 如果弹出确认窗口，请再次选择卸载。(Uninstall)
5. 重复此过程(procedure)，直到删除蓝牙部分中的所有驱动程序。(Bluetooth)
6. 删除所有蓝牙驱动程序(Bluetooth drivers)后，访问制造商的网站（例如联想(Lenovo)）并为您的系统下载最新的驱动程序。
注意：(Note:)我附上了联想的(Lenovo)蓝牙(Bluetooth)驱动。您可以在Google上搜索您各自的笔记本电脑制造商。
另请阅读：(Also Read:) 修复蓝牙无法在 Windows 10 上关闭(Fix Bluetooth can’t turn off on Windows 10)
方法 7：回滚最近的更新(Method 7: Rollback Recent Updates)
如果您在最近的操作系统升级后遇到通用蓝牙驱动程序(Generic Bluetooth Driver)问题，请返回到以前的版本。这可能是Build OS安装有缺陷的结果。以下是如何开始
1.在Windows搜索栏中搜索控制面板。(Control Panel)点击打开(Open)。
2. 单击查看(View By)方式：大图标。选择程序和功能(Program and Features)。
3. 转到查看(View) 已安装的更新(Installed Updates)。
4. 选择最新的补丁更新，然后从顶部功能区中选择卸载。(Uninstall)
5. 如果出现用户帐户控制(User Account Control)提示，单击是(Yes)确认删除。
另请阅读：(Also Read:) 什么是设备驱动程序？它是如何工作的？(What is a Device Driver? How Does It Work?)
方法8：重置电脑(Method 8: Reset PC)
如果上述替代方法都不能帮助解决缺少的通用蓝牙(Bluetooth)，请重置 PC 。
1. 同时按下Windows + I keys打开 设置(Settings)。
2. 选择更新和安全(Update & Security)。
3. 从左侧窗格中选择恢复(Recovery )选项，然后单击开始。(Get started.)
4. 现在，从重置此 PC(Reset this PC )窗口中选择一个选项。保留我的文件(Keep my files )选项将删除应用程序和设置，但保留您的文件。“删除所有内容( Remove everything )”选项将删除您的所有文件、应用程序和设置。
5. 单击云下载(Cloud download )，然后单击重置(Reset)。
6. 按照屏幕上的说明完成重置过程。最后，检查您是否已修复所讨论的错误。
常见问题 (FAQ)(Frequently Asked Questions (FAQs))
Q1。什么是蓝牙驱动程序错误？(Q1. What is a Bluetooth driver error?)
Ans:如果您没有安装设备驱动程序或如果您有一个过时的设备，您将收到蓝牙(Bluetooth)驱动程序错误。
Q2。我的蓝牙驱动程序怎么了？(Q2. What happened to my Bluetooth driver?)
答：如果您的(Ans: )蓝牙(Bluetooth)驱动程序太旧或有故障，总会出现错误。在大多数情况下，更新您的蓝牙(Bluetooth)驱动程序将解决问题。
Q3。什么原因导致驱动程序故障？(Q3. What causes driver malfunctions?)
答：(Ans: )大多数Windows设备驱动程序问题是由缺少、损坏或过时的驱动程序引起的。这只是您应该始终更新设备驱动程序的众多原因之一。
受到推崇的：(Recommended:)
我们希望您发现此信息有用，并且您能够解决如何修复Windows 10问题中的蓝牙驱动程序错误。( bluetooth driver error)请(Please)让我们知道哪种技术对您最有益。如果您有任何问题或意见，请使用下面的表格。
Fix Bluetooth Driver Error in Windows 10
On a Windows 10 PC, these days, Bluetooth pеripheral device рroblems are prеtty typicаl. Miѕsing Generic Bluetooth Driver is one such issue that we just еncountered. Thе Bluetooth drivеr issue may arіѕe when you connect a Bluetooth speaker, kеybоard, or mouse to your Windows 10 PC. The lack of а generic Bluetooth driver on your PC might be due to pending Windows 10 υpgrades or a damaged driver. This problem may arise as a result of outdated device drivers that have been concealed or faulty system files. Download and install the most reсent CU. This recurring problem can be fixed by rυnning the Bluetoоth troubleshooter, υnіnstalling and reinstalling the Bluetooth driver, and using system files repair tools (SFС/DISM). Today, in this poѕt, we’ll look аt some of the рossible causes of thіs problem of Bluetooth Driver Error Windows 10, as well as some potentіal remedies. Follow thе methods for resolving the Bluetooth driver problem in Windows 10.
How to Fix Bluetooth Driver Error in Windows 10
It’s conceivable that you’re not following the pairing steps thoroughly if you can’t connect a Bluetooth device to Windows. Because pairing these devices might be tricky at times, follow the directions carefully. Make sure you’ve pressed their pairing button and that the gadget is in pairing mode before you begin. If you don’t do so, Bluetooth won’t be able to recognize devices on your computer. There might be other explanations for Error establishing Bluetooth connection, but the methods will assist you in resolving the problem of Bluetooth Driver Error Windows 10.
Preliminary Checks
Follow the given preliminary checks before going through the troubleshooting methods.
Step 1: Ensure Bluetooth is Turned On
The method below will demonstrate how to check if your Bluetooth is turned on:
1. Press the Windows + I keys together to open Settings.
2. Select the Devices Tab.
3. Select Bluetooth and other devices.
4. Ensure that the Bluetooth is turned On.
Step 2: Turn Off Airplane
To fix Bluetooth driver error in Windows 10, make sure the Airplane mode is turned on. If this is the case, disable it before attempting to connect to your Bluetooth devices. To switch off Airplane mode, either press the button on your laptop keyboard or follow the instructions below:
1. Press the Windows + I keys simultaneously to open Settings.
2. Select Network & Internet.
3. Click on Airplane mode and make sure the toggle is turned Off.
Step 3: Check if your Bluetooth Device Is Working Fine
Bluetooth is activated by default on some devices, and when you switch on Bluetooth on another device, it will prompt you to connect. If it doesn’t work, try:
- Turn Off the device for a few seconds before resuming use.
- Make sure the gadget is within Bluetooth range.
- Keep your Bluetooth device away from USB devices that aren’t protected. As a result, your connectivity may be impeded.
- If your gadget is in good working order, try reconnecting it.
We have shown the following steps to check Bluetooth device
1. Launch the Windows Settings menu by pressing Windows + I keys together.
2. Click on Devices.
3. Look for the device that is causing problems, click on it then select Remove Device and confirm the removal by clicking Yes.
4. Click on Bluetooth & other devices settings.
5. Click on Add Bluetooth or another device.
6. Click on Bluetooth. Allow your system to look for compatible devices.
7. Click on the device which you want to connect.
Also Read: How to Install Bluetooth on Windows 10
Method 1: Run Bluetooth Troubleshooter
Use Windows 10 built-in Bluetooth debugging tool if none of the above worked. Windows 10 has several built-in troubleshooters aimed at resolving internal issues.
1. Press Windows + I keys simultaneously to launch Settings.
2. Select Update & Security.
3. Select Troubleshoot from the left pane.
4. Scroll down and click on Additional Troubleshooters.
5. Click on Bluetooth and select Run the troubleshooter.
6. Reboot the device when the troubleshooting is complete and see whether you can access the generic Bluetooth driver.
Method 2: Update Drivers
Updating a driver is the one approach that can repair your fix Bluetooth driver error in Windows 10. You’ve probably read about it a million times, but it could be useful. So, if your driver hasn’t been updated through Windows Update, go to Device Manager and manually download the newest driver for your Bluetooth device.
1. Hit the Windows key, type Device Manager and click on Open.
2. Double tap on Bluetooth to expand it.
3. Right-click the Generic Bluetooth Adapter. Select Update driver.
4. Click on Search automatically for drivers.
The Bluetooth driver will be found by Windows.
Also Read: How to Rename Bluetooth Devices on Windows 10
Method 3: Run SFC and DISM Scans
A rapid power fluctuation might cause system components to become corrupted, resulting in errors such as a missing Generic Bluetooth driver. Use the system file checker utility tool to help you if this is the case. The following are the steps that must be taken:
1. Hit the Windows key, type Command Prompt and click on Run as administrator.
2. Click on Yes in the User Account Control prompt.
3. Type sfc /scannow and press Enter key to run System File Checker scan.
Note: A system scan will be initiated and it will take a couple of minutes to finish. Meanwhile, you can continue performing other activities but be mindful of not accidentally closing the window.
After completing the scan, it will show either of these messages:
- Windows Resource Protection did not find any integrity violations.
- Windows Resource Protection could not perform the requested operation.
- Windows Resource Protection found corrupt files and successfully repaired them.
- Windows Resource Protection found corrupt files but was unable to fix some of them.
4. Once the scan is finished, restart your PC.
5. Again, launch Command Prompt as administrator and execute the given commands one after the other:
dism.exe /Online /cleanup-image /scanhealth
dism.exe /Online /cleanup-image /restorehealth
dism.exe /Online /cleanup-image /startcomponentcleanup
Note: You must have a working internet connection to execute DISM commands properly.
Method 4: Update Windows
Similar issues may occur if there is an uninstalled Windows 10 update. Even if that isn’t the case, keeping the operating system up to date eliminates a slew of flaws and problems. As a result, we recommend that you download and install the most recent security patch on your device by following the instructions below :
1. Press Windows + R keys simultaneously to open Settings.
2. Click on Update & Security.
3. Click on Check for Updates.
4A. Click Install now to download and install the latest update available.
4B. If your system is already up-to-date, then it will show You’re up to date message.
Also Read: How to Fix Bluetooth problems in Windows 10
Method 5: Update Hidden Drivers
The system fails to detect some hardware drivers in such cases because they are hidden resulting in the Missing Generic Bluetooth Driver error. Here’s how to find and update the hidden drivers.
1. Hit the Windows key, type Device Manager and click on Open.
2. Select View and click on Show hidden devices.
3. This will bring up all of the hidden drivers in the current window. Double-click to expand the Bluetooth.
4. Right-click the hidden device drivers and select Update driver.
Method 6: Reinstall Drivers
The fix Bluetooth driver error in Windows 10 issue can also occur if the existing device driver has become corrupt. To fix this problem of Bluetooth Driver Error Windows 10, go to the manufacturer’s website and download/install the necessary driver. Here’s how to get started:
1. Hit the Windows key, type Device Manager and click on Open.
2. Double-click on Bluetooth to expand.
3. Right-click on your Bluetooth Adapter. Click on Uninstall device.
4. If a confirmation window pops up, select Uninstall once more.
5. Repeat this procedure until all of the drivers in the Bluetooth section have been removed.
6. After you’ve deleted all of the Bluetooth drivers, go to the manufacturer’s website (e.g. Lenovo) and download the most recent driver for your system.
Note: I have attached the Bluetooth driver for Lenovo. You can search on Google for your respective laptop manufacturer.
Also Read: Fix Bluetooth can’t turn off on Windows 10
Method 7: Rollback Recent Updates
If you’re having trouble with the Generic Bluetooth Driver problem after a recent OS upgrade, go back to the previous version. This might be the result of a defective Build OS installation. Here’s how to get started
1. Search for Control Panel in Windows search bar. Click on Open.
2. Click on View By: Large Icons. Select Program and Features.
3. Go to View Installed Updates.
4. Select the most recent patch update and select Uninstall from the top ribbon.
5. If the User Account Control prompt appears, click on Yes to confirm the removal.
Also Read: What is a Device Driver? How Does It Work?
Method 8: Reset PC
Reset the PC if none of the preceding alternatives help to resolve the missing generic Bluetooth.
1. Press Windows + I keys together to open Settings.
2. Select Update & Security.
3. Select the Recovery option from the left pane and click on Get started.
4. Now, choose an option from the Reset this PC window. Keep my files option will remove apps and settings but keep your files. The Remove everything option will remove all your files, apps, and settings.
5. Click on Cloud download followed by Reset.
6. Follow the on-screen instructions to complete the reset process. Finally, check if you have fixed the discussed error.
Frequently Asked Questions (FAQs)
Q1. What is a Bluetooth driver error?
Ans: When you don’t have a device driver installed or if you have an outdated device, you’ll get a Bluetooth driver error.
Q2. What happened to my Bluetooth driver?
Ans: Errors will always occur if your Bluetooth driver is old or faulty. In most cases, updating your Bluetooth driver will resolve the issue.
Q3. What causes driver malfunctions?
Ans: The majority of Windows device driver issues are caused by missing, damaged, or obsolete drivers. It’s just one of the numerous reasons why you should always update your device drivers.
Recommended:
We hope you found this information useful and that you were able to resolve how to fix bluetooth driver error in Windows 10 issue. Please let us know which technique was the most beneficial for you. If you have any questions or comments, please use the form below.
