我的一位客户在尝试使用Windows Anytime Upgrade工具从Windows 7 家庭高级^{(Home Premium)}版升级到专业版^{(Professional)}时遇到了问题。他们最终收到以下消息，而不是正常工作：

Windows Anytime Upgrade was not successful

它给您的唯一遗憾的解决方案是再次尝试升级，但它不起作用。单击“联机解决此问题”链接^{(Go online to resolve this issue link)}似乎对您也没有任何帮助。经过一番研究，我找出了问题所在，终于能够升级客户的 PC。基本上^(Basically)，它源于Windows Update已将Service Pack 1下载到计算机上，但客户端没有安装它。因此，Windows Anytime Upgrade认为这是某种部分安装并阻止升级。

在本文中，我将向您介绍可能的解决方案。如果您仍然遇到问题或收到此错误，请在此处发表评论，我会尽力提供帮助。

方法 1 – Microsoft Fixit

通过下载并运行针对此特定问题的Microsoft Fixit解决方案，您可以免于处理任何事情。您可以直接从Microsoft^(Microsoft)下载它：

https://support.microsoft.com/en-us/help/2660811/error-message-when-you-install-windows-anytime-upgrade-on-a-windows-7

如果这不能解决问题，请继续阅读。

方法 2 – 卸载 Windows 7 SP1

您可以尝试做的下一件事是卸载SP1，然后尝试运行Anytime Upgrade。为此，您需要以管理员^{(Administrator)}身份运行命令提示符。单击^(Click)Start，输入CMD，然后右键单击cmd.exe并选择Run as Administrator。

在命令提示符处，键入以下命令：

dism.exe /online /remove-package /packagename:Package_for_KB976932~31bf3856ad364e35~x86~~6.1.1.17514

该命令适用于Windows 7 32 位。如果您运行的是64 位Windows 7，则需要输入以下命令：

dism.exe /online /remove-package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514

继续并退出命令提示符，然后重新启动计算机。现在尝试执行Windows Anytime Upgrade，看看会发生什么。

方法 3 – 卸载 SP1 Beta

如果您安装了Windows 7 SP 1的 beta 版本，则必须将其卸载。同样^(Again)，这是两个不同的命令，一个用于 32 位，一个用于 64 位。你只需要像我在Method 2中展示的那样打开一个提升的命令提示符。然后对 32 位运行以下命令：

dism.exe /online /remove-package /packagename:Package_for_KB976932~31bf3856ad364e35~x86~~6.1.1.17105

并为 64 位运行这个：

dism.exe /online /remove-package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17105

如果您仍然遇到Windows Anytime Upgrade失败或给出错误消息的问题，请在此处发表评论，我会尽力提供帮助。享受！

Fix “Windows Anytime Upgrade was not successful” Error

One of my clients ran into a problem when they wеre trying tо upgrade from Windows 7 Home Premium to Professional uѕing the Windows Anуtime Upgrade tool. Instead of it working like normal, they ended up getting the following message:

Windows Anytime Upgrade was not successful

The only sorry solution it gives you is to try the upgrade again, which doesn’t work. Clicking on the Go online to resolve this issue link doesn’t seem to take you anywhere helpful either. After doing some research, I figured out what the problem was and was finally able to get the client’s PC upgraded. Basically, it stemmed from the fact that Windows Update had downloaded Service Pack 1 onto the computer, but it was not installed by the client. Because of that, Windows Anytime Upgrade thinks that this is some sort of partial installation and blocks the upgrade.

In this article, I’ll walk you through the possible solutions. If you are still having trouble or get this error, post a comment here and I’ll try to help.

Method 1 – Microsoft Fixit

You may be able to spare yourself from having to anything by downloading and running the Microsoft Fixit solution for this particular problem. You can download it here directly from Microsoft:

https://support.microsoft.com/en-us/help/2660811/error-message-when-you-install-windows-anytime-upgrade-on-a-windows-7

If that doesn’t fix the issue, then keep reading.

Method 2 – Uninstall Windows 7 SP1

The next thing you can try to do is uninstall SP1 and then try to run the Anytime Upgrade. To do this, you need to run the command prompt as an Administrator. Click on Start, type in CMD and then right-click on cmd.exe and choose Run as Administrator.

At the command prompt, type in the following command:

dism.exe /online /remove-package /packagename:Package_for_KB976932~31bf3856ad364e35~x86~~6.1.1.17514

That command is for Windows 7 32-bit. If you are running Windows 7 64-bit, then you need to type in this command:

dism.exe /online /remove-package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514

Go ahead and exit the command prompt and then restart the computer. Now try to perform a Windows Anytime Upgrade and see what happens.

Method 3 – Uninstall SP1 Beta

If you installed the beta version of Windows 7 SP 1, then you have to uninstall that. Again, it’s two different commands, one for 32-bit and one for 64-bit. You just have to open an elevated command prompt like I showed in Method 2. Then run the following command for 32-bit:

dism.exe /online /remove-package /packagename:Package_for_KB976932~31bf3856ad364e35~x86~~6.1.1.17105

And run this one for 64-bit:

dism.exe /online /remove-package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17105

If you’re still having issues with Windows Anytime Upgrade failing or giving error message, post a comment here and I’ll try to help. Enjoy!

Related posts

• 修复 Windows 中的“Windows Media Player 无法播放此 DVD...模拟复制保护”

• 修复 Windows 7 或 Vista 中的“Windows 无法安装到所选位置”

• 如何从Windows 7升级到Windows 10而不会丢失数据

• 如何从Windows 7 FREE升级到Windows 10 ...即使是现在！

• 使用 Classic Shell 修复 Windows 7 中的 Windows Explorer 烦恼

• PCmover Express - Migrate Data从Windows 7到Windows 10免费

• 如何在 Windows 7 和 Windows 8.1 中创建自己的自定义跳转列表

• 如何在 Windows 7 中连接到无线网络

• 如何支持结束后安全Windows 7

• Install使用MAK并在多台设备上激活Windows 7 ESU键

• 如何在 Windows 7 或 Windows 8 中使用 XPS 查看器处理 XPS 文件

• 如何从Windows 7导入Sticky Windows 11/10

• 如何在 Windows 7 中重命名活动网络连接

• 如何在 Windows 7 中映射网络驱动器、网站和 FTP 位置

• 修复 COM Surrogate 在 Windows 7 中停止工作

• Windows 7的哪些功能在Windows 10中不再提供？

• Windows 11 vs. Windows 10 vs. Windows 7中的God Mode

• 在 Windows 10 中自定义任务栏、通知区域和操作中心

• 在 Windows 7 中为双显示器设置不同的背景

• Windows 8 和 10 中的 Aero Flip 3D 发生了什么？