“Windows 10 无法连接到此网络”是您在尝试将 Windows 机器连接到网络(connect your Windows machine to a network)时可能遇到的问题之一。如您所见,除了告诉您无法连接到网络外,该错误并没有说明问题发生的原因以及您可以采取的措施。
如果你是第一次遇到这种情况,你可能一无所知,不知道该怎么做。幸运的是,有几种方法可以解决此问题并成功连接到您在 PC 上选择的网络。
此外,请务必在我们的 YouTube 频道上查看我们的短视频,(short video on our YouTube channel)其中介绍了本文中提到的一些修复。
忘记网络并重新连接(Forget The Network & Reconnect To It)
当您的计算机出现问题时,通常会要求您重新启动计算机,这有望为您解决问题。您的网络连接也可以这样做。您可以尝试忘记网络,然后重新连接到它,看看它是否在没有任何问题的情况下连接。
虽然这是最基本的事情之一,但它可能对你有用,而且这样做也没有坏处。
- 在系统托盘中找到网络图标,右键单击它,然后选择打开网络和 Internet 设置(Open Network & Internet settings)。
- 单击左侧栏中显示Wi-Fi的选项以查看您的无线适配器。
- 在以下屏幕上,单击右侧窗格中的管理已知网络以查看您的网络。(Manage known networks)
- 您将看到您曾经从 PC 连接到的所有网络的列表。单击(Click)您在连接时遇到问题的那个,然后为其选择“忘记(Forget)”按钮。
- 该网络将从列表中删除。
- 要重新连接到它,请像往常一样扫描它并单击它。
打开和关闭飞行模式(Toggle The Airplane Mode On & Off)
在 iPhone 和Android等智能手机上,当您遇到“windows 10 无法连接到此网络”问题时,系统会要求您做的一件事是切换飞行模式(airplane mode),看看是否能解决问题。它在许多情况下都有效,因为它可以帮助您的设备完全断开与任何网络的连接,然后您可以将其关闭并手动连接到您选择的网络。
您也可以在 Windows PC 上使用相同的方法。
- 单击(Click)右下角类似通知的图标以打开Windows 操作(Windows Action)中心。
- 您将看到几个可以为您的机器启用和禁用的磁贴。单击(Click)显示飞行模式(Airplane mode)的选项以将其打开。
- 该磁贴将变为全蓝色,表示您的 PC 上已启用飞行模式。
- 等待(Wait)大约一分钟,然后再次单击同一个图块。这一次,它将禁用飞行模式。
- 重新连接(Reconnect)到您的网络,您应该可以毫无问题地进行操作。
卸载网络适配器的驱动程序(Uninstall The Drivers For Your Network Adapter)
您的Windows计算机可以识别您的网络适配器,因为您的计算机上安装了它的驱动程序。如果驱动程序出现问题,可能会导致“ Windows无法连接到此网络”等问题。
解决驱动程序相关问题的方法之一是卸载设备(uninstall the device)和驱动程序。然后,您的机器将自动为您的设备安装正确且必需的驱动程序。
- 使用Cortana搜索搜索设备管理器(Device Manager)并启动它。
- 通过单击展开网络适配器菜单。(Network adapters)然后,从列表中选择您的无线适配器,右键单击它,然后选择卸载设备(Uninstall device)。
- 勾选“删除此设备的驱动程序软件(Delete the driver software for this device)”框,然后单击“卸载(Uninstall)” 。它将从您的计算机中删除该设备及其驱动程序。
- 重新启动计算机。
- 您的计算机将自动查找并安装适配器所需的驱动程序。
在 CMD 中运行命令以解决问题(Run Commands In CMD To Fix The Issue)
您在 Windows 10 上遇到的“无法连接到网络”问题也可能是由于 IP 相关问题。在这种情况下,Microsoft建议您使用命令来释放您的 IP(release your IP)并刷新 DNS 缓存。
这些命令可以从您计算机上的命令提示符(Command Prompt)实用程序运行。您不需要配置它们或类似的东西;您需要做的就是将它们复制并粘贴到您的CMD窗口中。
- 使用Cortana搜索搜索命令提示符(Command Prompt),然后单击以管理员身份运行(Run as administrator)选项。
- 在命令提示符(Command Prompt)窗口中键入以下命令,在每行后按Enter 键。(Enter)
netsh winsock resetnetsh int ip resetipconfig /releaseipconfig /renewipconfig /flushdns
- 重新启动(Reboot)计算机,您的问题可能会得到解决。
重置您的网络设置(Reset Your Network Settings)
有时,网络设置中的不正确配置会导致诸如“Windows 10 无法连接到此网络”之类的错误。解决问题的最佳方法是重置您的网络设置,而不涉及太多细节。
它将您的设置恢复为出厂默认设置,您可以随时在需要时重新配置它们。
- 在您的 PC 上使用Cortana搜索启动“设置”(Settings)应用。
- 单击“网络和互联网(Network & Internet)”选项。
- (Scroll)在右侧窗格中向下滚动,然后单击Network reset(Network reset)选项。它应该位于屏幕的最底部。
- 单击立即重置(Reset now)按钮以重置您的设置。
在您的 PC 上禁用 IPv6(Disable IPv6 On Your PC)
您可以尝试在您的计算机上禁用 IP 版本 6,看看它是否有助于解决您计算机上的连接问题。大多数计算机都可以使用IPv4正常工作,并且您根本不应该有任何问题,除非您处理特别需要IPv6的东西。
- 右键单击(Right-click)系统托盘中的网络图标,然后选择打开网络和 Internet 设置(Open Network & Internet settings)。
- 单击以下屏幕上的更改适配器选项。(Change adapter options)
- 找到您的无线适配器,右键单击它,然后选择Properties。
- 您将看到几个可以为适配器启用和禁用的选项。Internet Protocol Version 6 (TCP/IPv6)的框以禁用 IPv6。然后点击底部的确定。(OK)
使用网络疑难解答(Use The Network Troubleshooter)
如果您仍然无法找出问题所在,您可能需要借助内置的网络疑难解答(network troubleshooter)程序来查找并修复计算机上的潜在问题。
- 在您的 PC 上启动设置应用程序。(Settings)
- 点击更新和安全(Update & Security)。
- 从左侧边栏中选择疑难解答。(Troubleshoot)
- 在列表中找到网络适配器(Network Adapter),单击它,然后选择运行疑难解答(Run the troubleshooter)。
“ Windows无法连接到此网络”问题基本上会让您瘫痪,因为它不允许您连接到Internet,这意味着您无法访问您的站点、电子邮件和任何其他需要有效Internet连接的东西。
如果您能够使用上述任何一种方法解决问题,请在下面的评论中告诉我们您的经验。
Fix “Windows Can’t Connect To This Network” Error
“Windows 10 can’t cоnnect to this network” is one of the issυes yoυ coυld facе while trying to connect your Windows machine to a network. As you can see, except for telling you you can’t connect to the network, the error doesn’t say much about why the issue has occurred and what you can do about it.
If you’ve found yourself in the situation for the first time, you’re probably clueless and have no idea what to do. Luckily, there are a few ways to get around the issue and successfully connect to your chosen network on your PC.
Also, be sure to check out our short video on our YouTube channel where we cover some of the fixes mentioned in this article.
Forget The Network & Reconnect To It
When there’s an issue on your computer, you’re usually asked to reboot your machine and that’ll hopefully fix it for you. The same can be done for your network connection as well. You can try forgetting the network and then re-connecting to it to see if it then connects without any issues.
Although it’s one of the most basic things to do, it may just work out for you, and there’s no harm in doing it.
- Find the network icon in your system tray, right-click on it, and select Open Network & Internet settings.
- Click on the option that says Wi-Fi in the left sidebar to view your wireless adapters.
- On the following screen, click on Manage known networks on the right-hand side pane to view your networks.
- You’ll see a list of all the networks you’ve ever connected to from your PC. Click on the one you’re having trouble connecting to and select the Forget button for it.
- The network will be removed from the list.
- To reconnect to it, scan for it as you would normally and click on it.
Toggle The Airplane Mode On & Off
On smartphones like iPhone and Android, when you face the “windows 10 can’t connect to this network” issue, one of the things you’re asked to do is toggle the airplane mode and see if that fixes the problem for you. It works in many cases as it helps your device fully disconnect from any networks, and you can then turn it off and manually connect to your chosen network.
You can use the same method on your Windows PC as well.
- Click on the notification-like icon at the bottom-right corner to open the Windows Action center.
- You’ll see several tiles you can enable and disable for your machine. Click on the one that says Airplane mode to turn it on.
- The tile will turn full blue meaning the airplane mode has been enabled on your PC.
- Wait for about a minute and then click on the same tile again. This time, it’ll disable the airplane mode.
- Reconnect to your network and you should be able to do it without an issue.
Uninstall The Drivers For Your Network Adapter
Your Windows computer recognizes your network adapter because you have its drivers installed on your machine. If there’s an issue with the drivers, it can cause issues like “Windows can’t connect to this network”.
One of the ways to resolve the driver-related issues is to uninstall the device and the drivers. Your machine will then automatically install the proper and required drivers for your device.
- Search for Device Manager using Cortana search and launch it.
- Expand the Network adapters menu by clicking on it. Then, select your wireless adapter from the list, right-click on it, and select Uninstall device.
- Tick-mark the box that says Delete the driver software for this device and click on Uninstall. It’ll remove the device as well as the drivers for it from your computer.
- Reboot your computer.
- Your computer will automatically find and install the required drivers for your adapter.
Run Commands In CMD To Fix The Issue
The “Can’t connect to network” issue you’re facing on your Windows 10 could be due to an IP related issue as well. In that case, Microsoft recommends you use a command to release your IP and flush the DNS cache.
These commands can be run from the Command Prompt utility on your computer. You don’t need to configure them or anything like that; all you need to do is copy and paste them into your CMD window.
- Search for Command Prompt using the Cortana search and click on the Run as administrator option.
- Type the following commands into the Command Prompt window one by one hitting Enter after each line.
netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns
- Reboot your computer and your issue should likely be fixed.
Reset Your Network Settings
Sometimes an improper configuration in your network settings can lead to errors like “Windows 10 can’t connect to this network”. The best way to resolve the issue, without getting into much details, is to reset your network settings.
It brings your settings back to the factory defaults, and you can always reconfigure them when needed.
- Launch the Settings app using Cortana search on your PC.
- Click on the option that says Network & Internet.
- Select Status from the left sidebar on your screen.
- Scroll down in the right-hand side pane and click on the option that says Network reset. It should be at the very bottom of your screen.
- Click on the Reset now button to reset your settings.
Disable IPv6 On Your PC
You can try disabling IP version 6 on your computer and see if it helps fix the connection issue on your machine. Most computers can work just fine with IPv4 and you shouldn’t have any issues at all, unless you work on something that specifically requires IPv6.
- Right-click on the network icon in your system tray and select Open Network & Internet settings.
- Click on Change adapter options on the following screen.
- Find your wireless adapter, right-click on it, and select Properties.
- You’ll see several options you can enable and disable for your adapter. Untick the box that says Internet Protocol Version 6 (TCP/IPv6) to disable IPv6. Then click on OK at the bottom.
Use The Network Troubleshooter
If you have still not been able to figure out the issue yet, you might want to take help of the built-in network troubleshooter to find and fix the underlying problem on your computer.
- Launch the Settings app on your PC.
- Click on Update & Security.
- Select Troubleshoot from the left sidebar.
- Find Network Adapter in the list, click on it, and choose Run the troubleshooter.
- The troubleshooter will find and help fix the issue on your machine.
The “Windows can’t connect to this network” issue basically paralyzes you as it won’t let you connect to the Internet, and that means you can’t access your sites, emails, and anything else that requires an active Internet connection.
If you were able to fix the issue using any of the above methods, please let us know your experience in the comments below.