“以太网(Ethernet)没有有效的 IP 配置”错误是与您的互联网连接相关的常见问题。这意味着您的计算机没有有效的 IP 地址,因此无法访问互联网。
尽管这个错误很烦人,但它只需要快速修复。所以,这里是你如何修复这个错误,以及如何阻止它再次发生。
“以太网没有有效的 IP 配置”错误(The “Ethernet Doesn’t Have a Valid IP Configuration” Error)
您的计算机需要一个有效的 IP 地址才能与您的路由器和 Internet 通信。如果没有,您将无法访问您的电子邮件、社交媒体、在线流媒体服务或其他方式。
当您的网络接口卡(Network Interface Card)( NIC ) 出现问题、出现故障、已过时或只是不想玩时,通常会出现此错误。值得庆幸的是,有几个简单的修复可用:
- 重新启动系统
- 重置您的网络适配器
- 重启你的路由器
- 运行(Run)网络适配器疑难解答
- 重置 Winsock
- 重新安装或更新您的网络适配器驱动程序
1.重启你的系统(1. Restart Your System)
修复无效以太网(Ethernet)配置的第一个也是最简单的方法是重新启动系统。系统重新启动具有重置所有传入和传出连接的好处。尽管“关闭再打开”似乎是一个过时的选项,但它可以解决的问题数量是惊人的。
2.重置您的网络适配器(2. Reset Your Network Adapter)
重置网络适配器是刷新 IP 地址配置的另一种方法。
按Windows Key + I打开“设置”窗口。在搜索栏中输入网络状态(network status)并选择第一个选项。现在,在Advanced network settings下,选择Change adapter options。
右键单击您的以太网连接(此修复也适用于有故障的 Wi-Fi 连接)并选择禁用(Disable)。稍等片刻,然后右键单击并选择启用(Enable)。启用以太网(Ethernet)连接后,您应该会收到一个新的 IP 地址,清除无效的 IP 配置。
重置网络适配器也是修复Windows 10 中无法识别的网络和其他 Internet 问题的便捷方法。( handy way to fix an unidentified network and other internet issues)
3.重启你的路由器(3. Restart Your Router)
重置路由器可以解决多个互联网连接问题,其方式与重新启动计算机的方式大致相同。就“以太网(Ethernet)没有有效的 IP 配置错误”而言,重启让您的路由器有机会为您的计算机配置一个新的 IP 地址。
您的路由器可能有一个电源开关,通常位于设备的背面。您可以关闭电源按钮,等待几秒钟,然后重新打开。如果您的路由器没有电源按钮,您可以在插座上关闭插头(如果您的电源插座没有开关,则拔下插头)。
请记住(Remember)在关闭和重新打开路由器电源之间留出几秒钟的时间。这几秒钟让路由器 IP 配置有机会重置,解决无效的 IP 配置错误。
4.运行网络适配器疑难解答(4. Run The Network Adapter Troubleshooter)
Windows 10 集成了许多常见问题的故障排除工具,网络适配器就是其中之一。
按Windows Key + S,键入网络适配器(network adapter),然后选择查找并修复网络适配器的问题(Find and fix problems with your network adapter)。现在,选择Advanced,然后选中Apply repairs automatically,然后是Run as Administrator。此时您可能需要输入Windows密码。
选择下一步,(Next,)然后从列表中选择您的以太网(Ethernet)网络适配器。解决与无效 IP 配置相关的问题并完成故障排除工具。根据网络适配器疑难解答发现的问题类型,您可能会看到不同的问题。
5. 重置 Winsock(5. Reset The Winsock)
Winsock ( Windows Socket ) 是一个核心Windows组件,用于处理使用 Internet 的程序的传入和传出数据请求。从本质上讲,Winsock有助于管理您的 Internet 连接和想要使用它的软件。
您可以在Winsock重置旁边使用一些命令,这也有助于重新配置您的以太网 IP(Ethernet IP)地址。
在开始菜单(Start Menu)搜索栏中键入命令提示符,选择(command prompt)Best Match,然后Run as Administrator。现在,逐一输入以下命令,在每个输入后按Enter :
- ipconfig /flushdns
- ipconfig /更新
- nbtstat –R
- nbtstat –RR
- netsh int ip reset c:esetlog.txt
- netsh winsock 重置
输入最终命令并看到成功完成消息后,您应该重新启动计算机。
命令提示符(Command Prompt)是一个功能强大的Windows工具(Windows),具有大量功能。使用每个 Windows 用户都应该知道的最佳命令提示符命令(best Command Prompt commands every Windows user should know)来(Exercise)更好地控制您的系统。
6.重新安装或更新网络连接驱动程序(6. Reinstall Or Update Network Connection Driver)
Windows 10 使您的驱动程序保持最新。但无论如何,您可能会遇到驱动程序错误。您可以手动更新与以太网(Ethernet)和Wi-Fi连接相关的驱动程序,确保这不是您的互联网连接问题的根源。
按Windows Key + X,然后从菜单中选择设备管理器。(Device Manager )选择网络适配器(Network adapters)以展开您设备的网络驱动程序列表。找到您的以太网(Ethernet)连接驱动程序。网络适配器驱动程序名称通常指示您要查找的驱动程序。例如,我的笔记本电脑的网络适配器是Qualcomm Atheros 千兆以太网控制器(Qualcomm Atheros Gigabit Ethernet Controller),这很容易弄清楚。
找到以太网(Ethernet)网络适配器驱动程序后,右键单击(right-click)并选择更新驱动程序(Update Driver)。选择自动搜索驱动程序,(Search automatically for drivers,) Windows将(Windows)自动在您的系统中搜索最佳驱动程序。如果找到更新的驱动程序,Windows将自动安装它。
驱动程序可能会导致整个系统出现其他问题。如果您的USB 3.0 端口无法正常工作,请按照以下方法修复它们(USB 3.0 ports aren’t working, here’s how you fix them)。
修复以太网没有有效的 IP 配置错误(Fixing The Ethernet Doesn’t Have a Valid IP Configuration Error)
这些是修复无效 IP 配置错误消息的最佳五个选项。此错误的出现令人愤怒,尤其是在您尝试完成某些工作或下载重要文件时。但是,上述修复之一应该重置您的以太网 IP(Ethernet IP)配置并让您的互联网恢复正常运行。
不幸的是,无效的 IP 配置错误并不是您可能面临的唯一Windows网络问题。(Windows)这是您在 Windows 中修复“无法更新 IP 地址”错误的方法(how you fix the “Cannot renew IP address” error in Windows)。
What Does “Ethernet Doesn’t Have a Valid IP Configuration” Mean?
Thе “Ethernet doesn’t have a valid IP configuration” error is a сommon issue relating tо your internet connection. It means that уоur computer doesn’t have a valid IP address and, therefore, cannоt аccess the internet.
As irritating as this error is, it only requires a quick fix. So, here’s how you fix this error, and how to stop it from happening again.
The “Ethernet Doesn’t Have a Valid IP Configuration” Error
Your computer needs a valid IP address before it can communicate with your router and the internet. If it doesn’t have one, you won’t be able to access your emails, social media, online streaming services, or otherwise.
This error usually arises when your Network Interface Card (NIC) has an issue, suffers a fault, is outdated, or just doesn’t want to play ball. Thankfully, there are several simple fixes available:
- Restart your system
- Reset your network adapter
- Restart your router
- Run the network adapter troubleshooter
- Reset the Winsock
- Reinstall or update your network adapter driver
1. Restart Your System
The first and easiest way to fix an invalid Ethernet configuration is to restart your system. A system restart has the benefit of resetting all of your incoming and outgoing connections. Although “turning it off and on again” seems like an antiquated option, the number of issues this can fix is phenomenal.
2. Reset Your Network Adapter
Resetting your network adapter is another way to refresh your IP address configuration.
Press Windows Key + I to open the Settings window. Type network status in the search bar and select the first option. Now, under Advanced network settings, select Change adapter options.
Right-click your Ethernet connection (this fix also works for faulty Wi-Fi connections) and select Disable. Wait a few moments, then right-click and select Enable. After enabling the Ethernet connection, you should receive a new IP address, clearing the invalid IP configuration.
Resetting the network adapter is also a handy way to fix an unidentified network and other internet issues in Windows 10.
3. Restart Your Router
Resetting your router can fix several internet connection issues, in much the same way as restarting your computer does. In terms of the “Ethernet doesn’t have a valid IP configuration error”, restarting gives your router the chance to configure a new IP address for your computer.
Your router may have a power switch, usually found on the rear of the device. You can switch the power button off, leave it for a few seconds, then switch it back on. If your router does not have a power button, you can switch the plug off at the socket (or remove the plug if your power outlet doesn’t have a switch).
Remember to leave a few seconds between switching off and powering the router back on. Those seconds give the router IP configuration a chance to reset, resolving the invalid IP configuration error.
4. Run The Network Adapter Troubleshooter
Windows 10 has integrated troubleshooting tools for many common issues, and the network adapter is one of those.
Press Windows Key + S, type network adapter, and select Find and fix problems with your network adapter. Now, select Advanced, then check Apply repairs automatically, followed by Run as Administrator. You may have to enter your Windows password at this point.
Select Next, then select your Ethernet network adapter from the list. Work through the questions available relating to the invalid IP configuration and complete the troubleshooting tool. You may see different questions depending on the type of issues the network adapter troubleshooter uncovers.
5. Reset The Winsock
The Winsock (Windows Socket) is a core Windows component that handles incoming and outgoing data requests for programs using the internet. Essentially, the Winsock helps with the management of your internet connection and the software that wants to use it.
There are a few commands you can use alongside the Winsock reset, which also help to reconfigure your Ethernet IP address.
Type command prompt in your Start Menu search bar, select the Best Match, then Run as Administrator. Now, input the following commands one-by-one, pressing Enter after each entry:
- ipconfig /flushdns
- ipconfig /renew
- nbtstat –R
- nbtstat –RR
- netsh int ip reset c:\resetlog.txt
- netsh winsock reset
After you input the final command and see a successful completion message, you should restart your computer.
The Command Prompt is a powerful Windows tool with heaps of functions. Exercise more control over your system with the best Command Prompt commands every Windows user should know.
6. Reinstall Or Update Network Connection Driver
Windows 10 keeps your drivers up to date. But you may encounter a driver error anyway. You can update the drivers associated with your Ethernet and Wi-Fi connection manually, making sure this isn’t the source of your internet connection issues.
Press Windows Key + X, then select Device Manager from the menu. Select Network adapters to unfurl the list of network drivers for your device. Locate your Ethernet connection driver. The network adapter driver name usually indicates which driver you are looking for. For example, the network adapter for my laptop is a Qualcomm Atheros Gigabit Ethernet Controller, which is easy to figure out.
Once you find your Ethernet network adapter driver, right-click and select Update Driver. Select Search automatically for drivers, and Windows will search your system for the best driver automatically. If a more up to date driver is found, Windows will install it automatically.
Drivers can cause other issues across your system. If your USB 3.0 ports aren’t working, here’s how you fix them.
Fixing The Ethernet Doesn’t Have a Valid IP Configuration Error
These are the best five options for fixing the invalid IP configuration error message. The appearance of this error is infuriating, especially if you are trying to complete some work or download an important file. However, one of the fixes above should reset your Ethernet IP configuration and get your internet back up and running.
Unfortunately, the invalid IP configuration error isn’t the only Windows network issue you might face. Here’s how you fix the “Cannot renew IP address” error in Windows.