首先^(First)，您应该了解什么是干净启动？执行干净启动以使用最少的驱动程序和程序集启动^{(driver & programs)}Windows。干净启动用于解决由于驱动程序或程序文件损坏而导致的Windows 问题。^{(Windows problem)}如果您的计算机没有正常启动，您应该执行干净启动来诊断您的系统问题^{(s problem)}。

干净启动与安全模式有何不同？

干净启动与安全模式不同，不应与之混淆。安全模式^{(Safe mode)}会关闭启动Windows所需的一切，并使用最稳定的驱动程序运行。当您在安全模式下运行Windows时，不会启动非必要进程，并且禁用非核心组件。因此，您只能在安全模式下尝试几件事，因为它旨在尽可能在稳定的环境中运行Windows 。而另一方面，干净启动^{(Clean boot)}不关心Windows 环境^{(Windows Environment)}，它只删除启动时加载的 3rd方供应商^{(party vendor)}加载项。所有的微软^(Microsoft)服务正在运行，并且Windows的所有组件都已启用。干净启动主要用于解决软件兼容性问题^{(software compatibility issue)}。现在我们已经讨论了干净启动^{(Clean boot)}，让我们看看如何执行它。

在 Windows 10 中执行干净启动

您可以使用“干净启动”使用最少的驱动程序和启动程序来启动Windows 。借助干净启动，您可以消除软件冲突。

第 1 步：加载选择性启动^{(Step 1: Load a Selective Startup)}

1. 按Windows Key + R按钮，然后键入msconfig 并单击确定。^(OK.)

2. 在常规选项卡下^{(General tab under)}，确保选中“选择性启动” 。^{( ‘Selective startup’)}

3.取消选中选择性启动下的“加载启动项”。^{(‘Load startup items)}

4. 选择“服务”选项卡^{(Service tab)}并选中“隐藏所有 Microsoft 服务”框。^{( ‘Hide all Microsoft services.’)}

5. 现在单击“全部禁用”以^{( ‘Disable all to)} 禁用所有可能导致冲突的不必要服务。

6. 在启动选项卡上，单击“打开任务管理器”。^{(‘Open Task Manager.’)}

7. 现在，在“启动”选项卡^{( the Startup tab)}（在任务管理器中）禁用所有^{( disable all )}已启用的启动项。

8. 单击确定^{( OK)}，然后单击重新启动。 ^(Restart. )这只是在Windows 10中执行^{(Windows 10)}干净启动^{(Clean boot)}所涉及的第一步，请按照下一步继续解决Windows中的软件兼容性问题^{(software compatibility issue)}。

第 2 步：启用一半的服务^{(Step 2: Enable half of the services)}

1. 按 Windows Key + R button，然后输入“msconfig”并单击“确定”。

2. 选择“服务”选项卡^{(Service tab)}并选中“隐藏所有 Microsoft 服务”框。^{(‘Hide all Microsoft services.’)}

3. 现在选择服务列表^{( Service list)}中的一半复选框并启用^(enable)它们。

4. 单击确定，然后单击重新启动。  ^{(Restart.  )}

第 3 步：确定问题是否再次出现。^{(Step 3: Determine whether the problem returns.)}

• 如果问题仍然存在，请重复步骤 1^{(step 1)}和步骤 2^{(step 2)}。在第 2 步中，只选择您在^{(step 2)}第 2 步^{(step 2)}中最初选择的服务的一半。
• 如果问题没有出现，请重复步骤 1^{(step 1)}和步骤 2^{(step 2)}。在第 2 步中，只^{(step 2)}选择^{(t select)}在第2^{(step 2)}步中未选择的服务的一半。重复这些步骤，直到您选择了所有复选框。
• 如果在“服务”列表^{(Service list)}中只选择了一项服务，而您仍然遇到问题，则选择的服务导致了问题。
• 转至步骤 6。如果没有服务导致此问题，则转至步骤 4。

第 4 步：启用一半的启动项。^{(Step 4: Enable half of the Startup items.)}

如果没有启动项^{(startup item)}导致此问题，则Microsoft 服务^{(Microsoft service)}最有可能导致此问题。要确定哪个Microsoft 服务^{(Microsoft service)}重复步骤 1 和 2，而不在任一步骤中隐藏所有Microsoft 服务。^{(Microsoft service)}

第 5 步：确定问题是否再次出现。^{(Step 5: Determine whether the problem returns.)}

• 如果问题仍然存在，请重复步骤 1^{(step 1)}和步骤 4^{(step 4)}。在第 4 步^{(step 4)}中，只选择您最初在“启动项”列表^{(Startup Item list)}中选择的一半服务。
• 如果问题没有出现，请重复步骤 1^{(step 1)}和步骤 4^{(step 4)}。在第 4 步中，只选择^{(step 4)}启动项列表^{(Startup Item list)}中未选择^{(t select)}的服务的一半。重复^(Repeat)这些步骤，直到您选择了所有复选框。
• 如果在“启动项”列表^{(Startup Item list)}中仅选择了一个启动项^{(startup item)}，并且您仍然遇到问题，则选择的启动项^{(start item)} 导致了问题。转到第 6 步。
• 如果没有启动项^{(startup item)}导致此问题，则Microsoft 服务^{(Microsoft service)}最有可能导致此问题。要确定哪个Microsoft 服务^{(Microsoft service)}重复步骤 1 和 2，而不在任一步骤中隐藏所有Microsoft 服务。^{(Microsoft service)}

第 6 步：解决问题。^{(Step 6: Resolve the problem.)}

现在您可能已经确定是哪个启动项或服务^{(item or service)}导致了问题，请联系程序制造商^{(program manufacturer)}或访问他们的论坛并确定问题是否可以解决。或者，您可以运行系统配置实用程序^{(System Configuration utility)}并禁用该服务或启动项，或者如果您可以卸载它们则更好。

第 7 步：按照以下步骤再次启动到正常启动：^{(Step 7: Follow these steps to again boot to normal startup:)}

1. 按Windows key + R按钮并键入“msconfig”，然后单击“确定”。

2. 在常规选项卡上，选择正常启动选项^{( Normal Startup option)} ，然后单击确定。

3. 当系统提示您重新启动计算机时，单击重新启动。 ^{( click Restart. )}这些是在 Windows 10^{(Perform Clean boot in Windows 10.)}中执行干净启动所涉及的所有步骤。

推荐的：^{(Recommended:)}

• Windows 资源管理器^{(Windows Explorer)}已停止工作 [已解决]
• 修复还原点在^{(Fix Restore Point)}Windows 10中不起作用
• 如何关闭DEP（数据执行保护^{(Data Execution Prevention)}）
• ^{(Fix File System Errors)}使用检查磁盘实用程序^{(Check Disk Utility)}( CHKDSK )修复文件系统错误

就是这样，您已经成功学习了如何在 Windows 10 中执行干净启动，^{(How to Perform Clean boot in Windows 10,)}但如果您对本指南仍有任何疑问，请随时在评论部分询问。

Perform Clean boot in Windows 10

First of all, you should understand whаt a clean boot is? A clean boot is performed to start Wіndows using a minimal set of driver & programs. A clean boot is used to troubleѕhoot уоur Windows problem dυe to corrupted drivers or program files. If your computer is not starting normally, you should perform a clean boоt to diagnose your system’s problem.

How is Clean boot different than Safe mode?

A clean boot is different from safe mode and should not be confused with it. Safe mode shuts down everything required to launch Windows and runs with the most stable driver available. When you run your Windows in safe mode, non-essential processes do not start, and non-core components are disabled. So there are only a few things you could try in safe mode, as it is designed to run Windows in a stable environment as possible. Whereas on the other hand, Clean boot does not care about the Windows Environment, and it only removes the 3rd party vendor add-ons that are loaded on startup. All the Microsoft services are running, and all the components of Windows are enabled. A clean boot is mainly used to troubleshoot the software compatibility issue. Now that we have discussed Clean boot, let’s see how to perform it.

Perform Clean Boot in Windows 10

You can start Windows using a minimal set of drivers and startup programs by using “clean boot.” With the help of a clean boot, you can eliminate software conflicts.

Step 1: Load a Selective Startup

1. Press the Windows Key + R button, then type msconfig and click OK.

2. Under General tab under, make sure ‘Selective startup’ is checked.

3. Uncheck ‘Load startup items‘ under selective startup.

4. Select the Service tab and check the box ‘Hide all Microsoft services.’

5. Now click ‘Disable all to disable all the unnecessary services which might cause conflict.

6. On the Startup tab, click ‘Open Task Manager.’

7. Now, in the Startup tab (Inside Task Manager) disable all the startup items which are enabled.

8. Click OK and then Restart. This was only the first step involved to Perform Clean boot in Windows 10, follow the next step to continue to troubleshoot software compatibility issue in Windows.

Step 2: Enable half of the services

1. Press the Windows Key + R button, then type ‘msconfig’ and click OK.

2. Select the Service tab and check the box ‘Hide all Microsoft services.’

3. Now select half of the checkboxes in the Service list and enable them.

4. Click OK and then Restart.  

Step 3: Determine whether the problem returns.

• If the problem still occurs, repeat step 1 and step 2. In step 2, only select half of the services that you originally selected in step 2.
• If the problem does not occur, repeat step 1 and step 2. In step 2, only select half of the services that you didn’t select in step 2. Repeat these steps until you have selected all the checkboxes.
• If only one service is selected in the Service list and you still experience the problem, then the selected service is causing the problem.
• Go to step 6. If no service causes this problem, then go to step 4.

Step 4: Enable half of the Startup items.

If no startup item causes this problem, then Microsoft services are most likely to cause the problem. To determine which Microsoft service repeat steps 1 and 2 without hiding all Microsoft services in either step.

Step 5: Determine whether the problem returns.

• If the problem still occurs, repeat step 1 and step 4. In step 4, only select half of the services you originally selected in the Startup Item list.
• If the problem does not occur, repeat step 1 and step 4. In step 4, only select half of the services you didn’t select in the Startup Item list. Repeat these steps until you have selected all the checkboxes.
• If only one startup item is selected in the Startup Item list and you still experience the problem, then the selected start item is causing the problem. Go to step 6.
• If no startup item causes this problem, then Microsoft services are most likely to cause the problem. To determine which Microsoft service repeat steps 1 and 2 without hiding all Microsoft services in either step.

Step 6: Resolve the problem.

Now you may have determined which startup item or service is causing the problem, contact the program manufacturer or go their forum and determine whether the problem can be resolved. Or you can run the System Configuration utility and disable that service or startup item or better if you can uninstall them.

Step 7: Follow these steps to again boot to normal startup:

1. Press the Windows key + R button and type ‘msconfig’ and click OK.

2. On the General tab, select the Normal Startup option and then click OK.

3. When you are prompted to restart the computer, click Restart. These are all the steps involved to Perform Clean boot in Windows 10.

Recommended:

• Windows Explorer has stopped working [SOLVED]
• Fix Restore Point Not Working in Windows 10
• How to Turn Off DEP (Data Execution Prevention)
• Fix File System Errors with Check Disk Utility(CHKDSK)

That’s it you have successfully learned How to Perform Clean boot in Windows 10, but if you still have any queries regarding this guide, then please feel free to ask them in the comment’s section.

Related posts

• 在Windows 10中使用Diskpart Clean Command清洁Disk

• 如何做Windows 10 Clean Install

• 如何在Windows 10上禁用Feature Updates的保障措施

• 如何在Windows 10使用Network Sniffer Tool PktMon.exe

• Windows 10中Taskbar Context Menu中的Hide Toolbars option

• Windows 10上的Fix Fast Battery drain使用Hybrid图形

• 如何在Windows 10计算机上打开.aspx文件

• 如何激活Windows 10 Enterprise Edition

• 免费Battery Limiter software用于Windows 10

• 使用MyLauncher为Windows 10计算机启动文件

• 如何在Windows 10查找和Notepad中的Replace Text

• 如何将Secure Delete添加到Windows 10中的context menu

• Windows 10中的splwow64.exe进程是什么，我可以禁用吗？

• 无法连接到Xbox Live; Windows 10中的Fix Xbox Live Networking issue

• Watch数字电视，并在Windows 10上收听Radio，ProgDVB

• 如何在Windows 10中禁用或启用读者Mode在Chrome中

• Windows 10中的启用包是什么

• 该PC无法升级到Windows 10由于Parity Storage空间

• 如何使用ICC Profile在Windows 10中安装Color Profile

• 创建Keyboard Shortcut以在Windows 10中打开您最喜爱的Website