在尝试更新 Windows 10^{(Update Windows 10)}机会时，您可能会遇到错误代码 0x80070422^{(Error Code 0x80070422)}，这会阻止您更新Windows。现在， Windows 更新^(Updates)是您系统的重要组成部分，因为它可以修补漏洞并使您的 PC 更安全地免受外部攻击。但是，如果您无法更新Windows，那么您就有大麻烦了，您需要尽快修复此错误。此错误表示更新安装失败，并显示以下错误消息：

安装更新时出现一些问题，但我们稍后会重试。如果您一直看到此内容并想搜索 Web 或联系支持人员以获取信息，这可能会有所帮助：(0x80070422)^{(There were some problems installing updates, but we’ll try again later. If you keep seeing this and want to search the web or contact support for information, this may help: (0x80070422))}

修复 Windows 10 更新错误 0x80070422

如果您也遇到上述问题，则表示Windows更新服务未启动，或者您需要重置 Windows 更新组件^{(reset the Windows update components)}来修复它。因此，不要浪费任何时间，让我们看看如何在下面列出的故障排除步骤的帮助下实际修复 Windows 10^{(Fix Windows 10)} 更新错误 0x80070422 。^{(Update Error 0x80070422)}

修复^(Fix)Windows 10更新错误 0x80070422^{(Update Error 0x80070422)}

确保创建一个还原点^{(create a restore point)}，以防万一出现问题。

方法一：重启 Windows 更新服务^{(Method 1: Restart Windows Update Service)}

1. 按 Windows 键 + R 然后键入services.msc 并按 Enter。

服务窗口

2. 找到以下服务：

后台智能传输服务 (BITS)^{( Background Intelligent Transfer Service (BITS))}
加密服务^{(Cryptographic Service)}
Windows Update
MSI 安装程序^{(MSI Installer)}

3. 右键单击它们中的每一个，然后选择属性^(Properties)。确保他们的启动^(A)类型^{(Startup type)}设置为自动。^(utomatic.)

确保他们的启动类型设置为自动。

4. 现在，如果上述任何服务停止，请务必单击“服务状态”下的“开始”。^{(Start under Service Status.)}

5. 接下来，右键单击Windows Update服务并选择重新启动。^(Restart.)

右键单击 Windows 更新服务并选择重新启动 | 修复 Windows 10 更新错误 0x80070422

6. 单击应用，然后单击确定^{( OK)}，然后重新启动 PC 以保存更改。

看看你是否可以修复 Windows 10 更新错误 0x80070422，^{(Fix Windows 10 Update Error 0x80070422,)}如果不能，则继续下一个方法。

方法2：确保检查以下服务^{(Method 2: Make sure to check following services)}

1. 按 Windows 键 + R 然后键入services.msc并按 Enter。

服务窗口

2. 现在找到以下服务并确保它们正在运行，如果没有，则右键单击每个服务并选择Start：

网络连接^{(Network Connections)}
Windows 搜索^{(Windows Search)}
Windows 防火墙^{(Windows Firewall)}
DCOM 服务器进程启动器^{(DCOM Server Process Launcher)}
BitLocker 驱动器加密服务^{(BitLocker Drive Encryption Service)}

右键单击 BitLocker 驱动器加密服务，然后选择开始

3.关闭^(Close)服务窗口并再次尝试更新Windows。

方法 3：禁用 IPv6^{(Method 3: Disable IPv6)}

1. 右键单击系统托盘上的WiFi图标，然后单击“打开网络和共享中心”。^{(Open Network and Sharing Center.)}”

右键单击系统托盘上的 WiFi 图标，然后单击右键单击系统托盘上的 WiFi 图标，然后单击打开网络和 Internet 设置

2. 现在 单击您当前的连接^{(click on your current connection)}以打开 设置。^(Settings.)

注意：^(Note:)如果您无法连接到您的网络，请使用以太网^(Ethernet)电缆进行连接，然后按照此步骤操作。

3. 在刚刚打开的窗口中单击 属性按钮^{(Properties button)} 。

wifi 连接属性| 修复 Windows 10 更新错误 0x80070422

4. 确保 uncheck Internet Protocol Version 6 (TCP/IP).

取消选中 Internet 协议版本 6 (TCP IPv6)

5.单击确定^{(Click OK)}，然后单击关闭^(Close)。重新启动^(Reboot)您的 PC 以保存更改。

方法四：禁用网络列表服务^{(Method 4: Disable Network List Service)}

1. 按 Windows 键 + R 然后键入services.msc并按 Enter。

服务窗口

2. 现在找到网络列表服务^{(Network List Service)}，然后右键单击它并选择属性。^{(Properties.)}

右键单击网络列表服务并选择属性 | 修复 Windows 10 更新错误 0x80070422

3. 从启动类型^{(Startup Type)}下拉列表中，选择禁用^(Disabled)，然后单击停止。^{( Stop.)}

确保将网络列表服务的启动类型设置为禁用，然后单击停止

4. 单击应用，然后单击确定。^(OK.)

5. 重新启动您的 PC 以保存更改。

受到推崇的：^{(Recommended:)}

修复 Windows 10 随机崩溃^{(Fix Windows 10 Crashing Randomly)}
修复驱动器在双击时无法打开^{(Fix Drives does not open on double click)}
如何修复无法打开本地磁盘 (C:)^{(How to Fix Unable to Open Local Disk (C:))}
修复 Windows 10 商店错误代码 0x80072efd^{(Fix Windows 10 Store Error Code 0x80072efd)}

就是这样，您已成功修复 Windows 10 更新错误 0x80070422^{(Fix Windows 10 Update Error 0x80070422)}，但如果您对这篇文章仍有任何疑问，请随时在评论部分提出。

Fix Windows 10 Update Error 0x80070422

While trying to Update Windows 10 chances, you may face Error Code 0x80070422 which prevents yoυ from updating уour Windows. Now Windows Updatеs is аn essential part of your system as it patches vulnerabilities and makes your PC more secure from the external exрloit. But if yoυ arе unablе to υpdate Windows, then you’re in big trouble, and you need to fix thіs error as soon аs possible. This error indicаtes that updates were failed to install with the below error message:

There were some problems installing updates, but we’ll try again later. If you keep seeing this and want to search the web or contact support for information, this may help: (0x80070422)

If you are also facing the above issue, then it means either Windows updates service is not started, or you need to reset the Windows update components to fix it. So without wasting any time let’s see how to actually Fix Windows 10 Update Error 0x80070422 with the help of below-listed troubleshooting steps.

Fix Windows 10 Update Error 0x80070422

Make sure to create a restore point, just in case something goes wrong.

Method 1: Restart Windows Update Service

1. Press Windows Key + R then type services.msc and hit Enter.

services windows

2. Locate the following services:

Background Intelligent Transfer Service (BITS)
Cryptographic Service
Windows Update
MSI Installer

3. Right-click on each of them and then select Properties. Make sure their Startup type is set to Automatic.

make sure their Startup type is set to Automatic.

4. Now if any of the above services are stopped, make sure to click on Start under Service Status.

5. Next, right-click on Windows Update service and select Restart.

Right-click on Windows Update Service and select Restart | Fix Windows 10 Update Error 0x80070422

6. Click Apply, followed by OK and then reboot your PC to save changes.

See if you can Fix Windows 10 Update Error 0x80070422, if not then continue with the next method.

Method 2: Make sure to check following services

1. Press Windows Key + R then type services.msc and hit Enter.

services windows

2. Now locate the following services and make sure they are running, if not then right-click on each of them and select Start:

Network Connections
Windows Search
Windows Firewall
DCOM Server Process Launcher
BitLocker Drive Encryption Service

Right-click on BitLocker Drive Encryption Service then select Start

3. Close services window and again try to update Windows.

Method 3: Disable IPv6

1. Right-click on the WiFi icon on the system tray and then click on “Open Network and Sharing Center.”

Right click on WiFi icon on system tray and then click on Right click on WiFi icon on system tray and then click on Open Network & Internet settings

2. Now click on your current connection to open Settings.

Note: If you can’t connect to your network, then use an Ethernet cable to connect and then follow this step.

3. Click the Properties button in the window that just open.

wifi connection properties | Fix Windows 10 Update Error 0x80070422

4. Make sure to uncheck Internet Protocol Version 6 (TCP/IP).

uncheck Internet Protocol Version 6 (TCP IPv6)

5. Click OK, then click Close. Reboot your PC to save changes.

Method 4: Disable Network List Service

1. Press Windows Key + R then type services.msc and hit Enter.

services windows

2. Now locate Network List Service then right-click on it and select Properties.

Right-click on Network List Service and select Properties | Fix Windows 10 Update Error 0x80070422

3. From Startup Type drop-down, select Disabled and then click on Stop.

Make sure to set Startup type as Disabled for Network List Service and click Stop

4. Click Apply, followed by OK.

5. Reboot your PC to save changes.

Recommended:

That’s it you have successfully Fix Windows 10 Update Error 0x80070422 but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

瑛武

About the author

我是一名专业的音频工程师，拥有超过 10 年的经验。我参与过各种各样的项目，从小型家庭音响系统到大型商业制作。我的技能在于创造出色的配乐和声音处理工具，让音乐听起来很棒。我对 Windows 10 也非常有经验，可以帮助您充分利用您的计算机系统。

修复 Windows 10 更新错误 0x80070422

修复^(Fix)Windows 10更新错误 0x80070422^{(Update Error 0x80070422)}

方法一：重启 Windows 更新服务^{(Method 1: Restart Windows Update Service)}