PNP_DETECTED_FATAL_ERROR的错误检查值为 0x000000CA，这表明PNP 管理器^{(PNP Manager)}遇到了严重错误。此错误的主要原因一定是有问题的即插即用驱动^(Plug)程序可能已损坏，因为您知道PNP代表即插即用^(Play)，它^(Play)由Microsoft开发，使用户能够将设备插入 PC 并拥有^(Plug)计算机识别设备，而无需用户告诉计算机这样做。

修复 PNP 检测到的致命错误 Windows 10

现在，如果您遇到这个致命错误，那么这意味着即插即用功能^(Play)可能无法正常工作，并且您可能无法使用USB设备、外部硬盘、视频卡等。所以不要浪费任何时间，让我们看看如何在下面列出的故障排除指南的帮助下实际修复 PNP 检测到的致命错误Windows 10。^{(Fix PNP Detected Fatal Error)}

修复 PNP 检测到的致命错误^{(Fix PNP Detected Fatal Error)}Windows 10

确保创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法一：卸载驱动程序或软件^{(Method 1: Uninstall Drivers or Software)}

1.首先，您需要使用此处列出^{(methods listed here.)}的任何一种方法将 PC 启动到安全模式。^{(Safe Mode)}

2.按 Windows 键 + R 然后键入devmgmt.msc并按Enter打开设备管理器^{(Device Manager)}。

devmgmt.msc 设备管理器| 修复 PNP 检测到的致命错误 Windows 10

3.如果您最近更新了任何设备的任何驱动程序，请找到确切的设备。

4.右键单击它并选择属性。^{( Properties.)}

右键单击网络适配器并选择属性

5.切换到驱动程序选项卡^{(Driver tab)}，然后单击回滚驱动程序。^{(Roll Back Driver.)}

回滚驱动程序 Realtek PCIe GBE 系列控制器

6.按 Windows 键 + R 然后键入appwiz.cpl并按 Enter。

输入 appwiz.cpl 并按 Enter 打开程序和功能

7.如果您最近安装了任何新程序，请确保使用“程序和功能”从您的 PC 中卸载它。^{(uninstall it from your PC using Program and Features.)}

8.重新启动你的电脑进入正常模式，看看你是否能够修复 PNP 检测到的致命错误。^{(Fix PNP Detected Fatal Error.)}

方法2：运行系统还原^{(Method 2: Run System Restore)}

1.按 Windows 键 + R 并输入“ sysdm.cpl ”然后回车。

系统属性 sysdm

2.选择系统保护^{(System Protection)}选项卡，然后选择系统还原。^{( System Restore.)}

系统属性中的系统还原

3.单击下一步并选择所需的系统还原点^{(System Restore point)}。

系统恢复| 修复 PNP 检测到的致命错误 Windows 10

4.按照屏幕提示完成系统还原。

5.重新启动后，您可能能够修复 PNP 检测到的致命错误 Windows 10。^{(Fix PNP Detected Fatal Error Windows 10.)}

方法 3：执行干净启动^{(Method 3: Perform a Clean Boot)}

有时第 3 方软件可能会与系统^(System)冲突，因此会导致此错误。为了修复 PNP 检测到的致命错误 Windows 10^{(Fix PNP Detected Fatal Error Windows 10)}，您需要在 PC 上执行干净启动^{(perform a clean boot)}并逐步诊断问题。

方法 4：运行 SFC 和 DISM^{(Method 4: Run SFC and DISM)}

1.打开命令提示符^{(Command Prompt)}。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

打开命令提示符。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

2.现在在cmd中输入以下内容并回车：

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

SFC 立即扫描命令提示符

3.等待^(Wait)上述过程完成，完成后，重新启动PC。

4.再次^(Again)打开 cmd 并输入以下命令并在每个命令后按回车键：

Dism /Online /Cleanup-Image /CheckHealth
Dism /Online /Cleanup-Image /ScanHealth
Dism /Online /Cleanup-Image /RestoreHealth

DISM 恢复健康系统

5. 让DISM命令运行并等待它完成。

6. 如果上述命令不起作用，请尝试以下操作：

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

注意：^(Note:) 将^(Replace)C:RepairSourceWindows 替换为您的修复源（Windows 安装^{(Windows Installation)}或恢复光盘^{(Recovery Disc)}）。

7. 重新启动您的 PC 以保存更改并查看您是否能够修复 PNP 检测到的致命错误 Windows 10。^{(Fix PNP Detected Fatal Error Windows 10.)}

方法 5：运行驱动程序验证程序^{(Method 5: Run Driver Verifier)}

仅当您可以正常登录Windows时，此方法才有用，而不是在安全模式下。接下来，确保创建一个系统还原点。

运行驱动程序验证管理器

方法6：运行CCleaner^{(Method 6: Run CCleaner)}

1. 下载并安装 CCleaner & Malwarebytes。

2. 现在运行 CCleaner 并选择Custom Clean。

3. 在自定义清理下，选择Windows 选项卡^{(Windows tab)}并勾选默认值，然后单击分析^(Analyze)。

选择自定义清理，然后在 Windows 选项卡中选中默认值 | 修复 PNP 检测到的致命错误 Windows 10

4.分析完成后，确保您确定要删除要删除的文件。^{(Once Analyze is complete, make sure you’re certain to remove the files to be deleted.)}

单击运行清理程序以删除文件

5. 最后，点击Run Cleaner 按钮，让CCleaner运行。

6. 要进一步清理您的系统，请选择注册表选项卡^{(select the Registry tab)}，并确保选中以下内容：

选择注册表选项卡，然后单击扫描问题

7. 单击Scan for Issues 按钮并允许CCleaner扫描，然后单击 Fix Selected Issues 按钮。

完成问题扫描后，单击修复选定的问题 | 修复 PNP 检测到的致命错误 Windows 10

8. 当 CCleaner 询问“您想要对注册表的更改进行备份吗？^{(Do you want backup changes to the registry?)}” 选择是^{( select Yes)}。

9. 备份完成后，单击修复所有选定问题^{(Fix All Selected Issues)} 按钮。

10. 重新启动您的 PC 以保存更改。

方法 7：运行自动修复^{(Method 7: Run Automatic Repair)}

1. 插入Windows 10可启动安装DVD并重新启动您的 PC。

2. 当提示Press any key to boot from CD or DVD时，按任意键继续。

按任意键从 CD 或 DVD 启动

3. 选择您的语言首选项，然后单击下一步^(Next)。单击左下角的修复计算机。^{(Click Repair)}

修理你的电脑

4. 在选择选项屏幕上，单击疑难解答^{(Troubleshoot)}。

在 windows 10 自动启动修复中选择一个选项 | 修复 PNP 检测到的致命错误 Windows 10

5. 在疑难解答^{(Troubleshoot)}屏幕上，单击高级选项^{(Advanced option)}。

从故障排除屏幕中选择高级选项

6. 在高级^(Advanced)选项屏幕上，单击自动修复或启动修复^{(Automatic Repair or Startup Repair)}。

运行自动修复

7. 等到Windows Automatic/Startup Repairs完成。

8.重新启动^(Restart)，您已成功修复 PNP 检测到的致命错误 Windows 10，^{( Fix PNP Detected Fatal Error Windows 10,)} 如果没有，请继续。

另请阅读：^{(Also Read:)} 如何修复自动修复无法修复您的 PC。^{(How to fix Automatic Repair couldn’t repair your PC.)}

方法 8：暂时禁用您的防病毒软件^{(Method 8: Temporarily Disable your Antivirus)}

1. 右键单击系统托盘中的防病毒程序图标^{( Antivirus Program icon)}并选择禁用。^(Disable.)

禁用自动保护以禁用您的防病毒软件

2. 接下来，选择防病毒软件将保持禁用的时间范围。^{( Antivirus will remain disabled.)}

选择直到禁用防病毒软件的持续时间

注意：^(Note:)选择尽可能短的时间，例如 15 分钟或 30 分钟。

3. 完成后，尝试浏览并检查您是否能够修复 PNP 检测到的致命错误 Windows 10。^{(Fix PNP Detected Fatal Error Windows 10.)}

方法 9：确保 Windows 是最新的^{(Method 9: Make sure Windows is up to date)}

1. 按 Windows Key + I 打开设置，然后单击 更新和安全。^{( Update & Security.)}

按 Windows 键 + I 打开设置，然后单击更新和安全图标

2. 从左侧，菜单点击Windows Update。

3. 现在单击“检查更新^{(Check for updates)}”按钮以检查任何可用的更新。

检查 Windows 更新 | 加速你的慢电脑 | 修复 PNP 检测到的致命错误 Windows 10

4. 如果有任何更新待处理，请单击下载并安装更新。^{(Download & Install updates.)}

检查更新 Windows 将开始下载更新

5. 下载更新后，安装它们，您的 Windows 将成为最新版本。

方法 10：运行磁盘清理^{(Method 10: Run Disk Cleanup)}

1.打开命令提示符^{(Command Prompt)}。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

2. 在 cmd 中输入以下命令并回车^(Enter)：

清洁工^(cleanmgr)

运行磁盘清理 cleanmgr

3. 选择C: Drive first 并单击 OK。然后对每个其他驱动器号执行相同的步骤。

4.磁盘清理向导出现后，^{(Disk Cleanup)}从列表中^{(Temporary files from the list)}选中临时文件，然后单击确定。

在磁盘清理中清理临时文件 | 修复 PNP 检测到的致命错误 Windows 10

5. 重新启动您的 PC 以保存更改。

受到推崇的：^{(Recommended:)}

修复 BAD_SYSTEM_CONFIG_INFO 错误^{(Fix BAD_SYSTEM_CONFIG_INFO Error)}
如何修复 Windows 体验索引冻结问题^{(How to Fix Windows Experience Index Freezing Issue)}
修复 Windows 无法完成解压错误^{(Fix Windows cannot complete the extraction error)}
修复 ERR_EMPTY_RESPONSE Google Chrome 错误^{(Fix ERR_EMPTY_RESPONSE Google Chrome Error)}

就是这样，您已成功修复 PNP 检测到的致命错误 Windows 10^{( Fix PNP Detected Fatal Error Windows 10)}，但如果您对这篇文章仍有任何疑问，请随时在评论部分提出。

Fix PNP Detected Fatal Error Windows 10

The PNР_DΕTECTED_FATAL_ERROR has a bug check value of 0x000000CA, which indicates that the PNP Manager has encountered a severе error. The main causе of this еrror must be a problematic Plug and Play driver who might have gоt corrupted as yоu know that PNP stands for Plug and Play, which is developed by Microsoft to give users thе аbility to plug a device into a PС and have that computer rеcognize the devіce wіthout users telling the computer to do so.

Now if you’re facing this fatal error, then this means the Plug and Play functionality might not be working, and you may not be able to use USB devices, external hard disk, video cards etc. So without wasting any time let’s see how to actually Fix PNP Detected Fatal Error Windows 10 with the help of below-listed troubleshooting guide.

Fix PNP Detected Fatal Error Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: Uninstall Drivers or Software

1.First, you need to boot your PC into Safe Mode using any one of the methods listed here.

2.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

devmgmt.msc device manager | Fix PNP Detected Fatal Error Windows 10

3.If you have recently updated any drivers for any devices, locate the exact device.

4.Right-click on it and select Properties.

right-click on network adapter and select Properties

5.Switch to Driver tab and click on Roll Back Driver.

Roll back drivers Realtek PCIe GBE Family Controller

6.Press Windows Key + R then type appwiz.cpl and hit Enter.

type appwiz.cpl and hit Enter to open Programs and Features

7.If you have recently installed any new program, make sure to uninstall it from your PC using Program and Features.

8.Reboot your PC into normal mode and see if you’re able to Fix PNP Detected Fatal Error.

Method 2: Run System Restore

1.Press Windows Key + R and type”sysdm.cpl” then hit enter.

system properties sysdm

2.Select System Protection tab and choose System Restore.

system restore in system properties

3.Click Next and choose the desired System Restore point.

system-restore | Fix PNP Detected Fatal Error Windows 10

4.Follow the on-screen instruction to complete system restore.

5.After reboot, you may be able to Fix PNP Detected Fatal Error Windows 10.

Method 3: Perform a Clean Boot

Sometimes 3rd party software can conflict with System and therefore cause this error. In order Fix PNP Detected Fatal Error Windows 10, you need to perform a clean boot on your PC and diagnose the issue step by step.

Method 4: Run SFC and DISM

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

SFC scan now command prompt

3. Wait for the above process to finish and once done, restart your PC.

4. Again open cmd and type the following command and hit enter after each one:

Dism /Online /Cleanup-Image /CheckHealth
Dism /Online /Cleanup-Image /ScanHealth
Dism /Online /Cleanup-Image /RestoreHealth

DISM restore health system

5. Let the DISM command run and wait for it to finish.

6. If the above command doesn’t work, then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with your repair source (Windows Installation or Recovery Disc).

7. Reboot your PC to save changes and see if you’re able to Fix PNP Detected Fatal Error Windows 10.

Method 5: Run Driver Verifier

This method is only useful if you can log into your Windows normally not in the safe mode. Next, make sure to create a System Restore point.

run driver verifier manager

Method 6: Run CCleaner

1. Download and install CCleaner & Malwarebytes.

2. Now run CCleaner and select Custom Clean.

3. Under Custom Clean, select the Windows tab and checkmark defaults and click Analyze.

Select Custom Clean then checkmark default in Windows tab | Fix PNP Detected Fatal Error Windows 10

4. Once Analyze is complete, make sure you’re certain to remove the files to be deleted.

Click on Run Cleaner to deleted files

5. Finally, click on the Run Cleaner button and let CCleaner run its course.

6. To further clean your system, select the Registry tab, and ensure the following are checked:

Select Registry tab then click on Scan for Issues

7. Click on the Scan for Issues button and allow CCleaner to scan, then click on the Fix Selected Issues button.

Once scan for issues is completed click on Fix selected Issues | Fix PNP Detected Fatal Error Windows 10

8. When CCleaner asks “Do you want backup changes to the registry?” select Yes.

9. Once your backup has completed, click on the Fix All Selected Issues button.

10. Restart your PC to save changes.

Method 7: Run Automatic Repair

1. Insert the Windows 10 bootable installation DVD and restart your PC.

2. When prompted to Press any key to boot from CD or DVD, press any key to continue.

Press any key to boot from CD or DVD

3. Select your language preferences, and click Next. Click Repair your computer in the bottom-left.

Repair your computer

4. On choose an option screen, click Troubleshoot.

Choose an option at windows 10 automatic startup repair | Fix PNP Detected Fatal Error Windows 10

5. On Troubleshoot screen, click the Advanced option.

select advanced option from troubleshoot screen

6. On the Advanced options screen, click Automatic Repair or Startup Repair.

run automatic repair

7. Wait till the Windows Automatic/Startup Repairs complete.

8. Restart and you have successfully Fix PNP Detected Fatal Error Windows 10, if not, continue.

Also Read: How to fix Automatic Repair couldn’t repair your PC.

Method 8: Temporarily Disable your Antivirus

1. Right-click on the Antivirus Program icon from the system tray and select Disable.

Disable auto-protect to disable your Antivirus

2. Next, select the time frame for which the Antivirus will remain disabled.

select the duration until when the antivirus will be disabled

Note: Choose the smallest amount of time possible, for example, 15 minutes or 30 minutes.

3. Once done, try to navigate around and check if you’re able to Fix PNP Detected Fatal Error Windows 10.

Method 9: Make sure Windows is up to date

1. Press Windows Key + I to open Settings then click on Update & Security.

Press Windows Key + I to open Settings then click on Update & security icon

2. From the left-hand side, menu clicks on Windows Update.

3. Now click on the “Check for updates” button to check for any available updates.

Check for Windows Updates | Speed Up Your SLOW Computer | Fix PNP Detected Fatal Error Windows 10

4. If any updates are pending, then click on Download & Install updates.

Check for Update Windows will start downloading updates

5. Once the updates are downloaded, install them, and your Windows will become up-to-date.

Method 10: Run Disk Cleanup

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Type the following command into cmd and hit Enter:

cleanmgr

Run Disk Cleanup cleanmgr

3. Select C: Drive first and click OK. Then follow the same step for every other drive letter.

4. Once the Disk Cleanup wizard shows up, checkmark Temporary files from the list and click OK.

Clean Temporary files in Disk Cleanup | Fix PNP Detected Fatal Error Windows 10

5. Restart your PC to save changes.

Recommended:

That’s it you have successfully Fix PNP Detected Fatal Error Windows 10 but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

瑛武

About the author

我是一名专业的音频工程师，拥有超过 10 年的经验。我参与过各种各样的项目，从小型家庭音响系统到大型商业制作。我的技能在于创造出色的配乐和声音处理工具，让音乐听起来很棒。我对 Windows 10 也非常有经验，可以帮助您充分利用您的计算机系统。

修复 PNP 检测到的致命错误 Windows 10

修复 PNP 检测到的致命错误(Fix PNP Detected Fatal Error)Windows 10

方法一：卸载驱动程序或软件(Method 1: Uninstall Drivers or Software)

方法2：运行系统还原(Method 2: Run System Restore)

方法 3：执行干净启动(Method 3: Perform a Clean Boot)

方法 4：运行 SFC 和 DISM(Method 4: Run SFC and DISM)

方法 5：运行驱动程序验证程序(Method 5: Run Driver Verifier)

方法6：运行CCleaner(Method 6: Run CCleaner)

方法 7：运行自动修复(Method 7: Run Automatic Repair)

方法 8：暂时禁用您的防病毒软件(Method 8: Temporarily Disable your Antivirus)

方法 9：确保 Windows 是最新的(Method 9: Make sure Windows is up to date)

方法 10：运行磁盘清理(Method 10: Run Disk Cleanup)

Fix PNP Detected Fatal Error Windows 10

Fix PNP Detected Fatal Error Windows 10

Method 1: Uninstall Drivers or Software

Method 2: Run System Restore

Method 3: Perform a Clean Boot

Method 4: Run SFC and DISM

Method 5: Run Driver Verifier

Method 6: Run CCleaner

Method 7: Run Automatic Repair

Method 8: Temporarily Disable your Antivirus

Method 9: Make sure Windows is up to date

Method 10: Run Disk Cleanup

瑛 武

About the author

Related posts

如何Fix Final Fantasy XIV Fatal DirectX Error

如何修复调试器检测到的错误

修复致命错误未找到语言文件

Fix Error 0X80010108在Windows 10中

如何Fix Application Error 0xc0000005

Fix DISM Source Files Could未找到Error

Fix Ca在Microsoft Edge中确保Connect Connect

Fix Could不是Steam Network Error的Connect

Fix Insufficient System Resources Exist以完成API Error

Windows 10上的Fix Device不是Migrated Error

Xfinity Stream上的Fix Error TVAPP-00100

Fix Destination Folder Access Denied Error

Windows 10上的Fix Generic PnP Monitor Problem

如何Fix Application Load Error 5:0000065434

Fix Windows 10 Updates Wo不是Install Error

修复Windows无法Connect到此Network Error

Fix io.netty.channel.abstractchannel $ AnnotatedConnectException Error在Minecraft

Fix Windows Update Error 0x800704c7

Fix U-Verse Modem Gateway Authentication Failure Error

Device Manager中的Fix Network Adapter Error Code 31

修复 PNP 检测到的致命错误^{(Fix PNP Detected Fatal Error)}Windows 10

方法一：卸载驱动程序或软件^{(Method 1: Uninstall Drivers or Software)}

方法2：运行系统还原^{(Method 2: Run System Restore)}

方法 3：执行干净启动^{(Method 3: Perform a Clean Boot)}

方法 4：运行 SFC 和 DISM^{(Method 4: Run SFC and DISM)}

方法 5：运行驱动程序验证程序^{(Method 5: Run Driver Verifier)}

方法6：运行CCleaner^{(Method 6: Run CCleaner)}

方法 7：运行自动修复^{(Method 7: Run Automatic Repair)}

方法 8：暂时禁用您的防病毒软件^{(Method 8: Temporarily Disable your Antivirus)}

方法 9：确保 Windows 是最新的^{(Method 9: Make sure Windows is up to date)}

方法 10：运行磁盘清理^{(Method 10: Run Disk Cleanup)}

瑛武