如果您最近安装了导致视频驱动程序和 Windows 10 之间发生冲突的新硬件或软件，则会发生VIDEO_SCHEDULER_INTERNAL_ERROR 。^{(VIDEO_SCHEDULER_INTERNAL_ERROR)}视频调度程序内部错误^{(Video Scheduler Internal Error)}是蓝屏^{(Blue Screen)}死机^(Death)( BSOD ) 错误，表示视频调度程序检测到致命违规。该错误主要是由显卡^(Graphics)引起的，它是驱动程序问题并且有一个停止错误代码0x00000119。

当您看到VIDEO_SCHEDULER_INTERNAL_ERROR时，PC 通常会重新启动，在此错误发生之前，您的 PC 很可能会冻结几分钟。显示器^(Display)似乎时不时地崩溃，这似乎让很多用户感到沮丧。但在着手解决此问题之前，我们必须完全了解导致此VIDEO_SCHEDULER_INTERNAL_ERROR的原因，然后准备修复此错误。

视频调度程序内部^{(Video Scheduler Internal)}错误的各种原因：

• 不兼容、损坏或过时的图形^(Graphics)驱动程序
• 损坏的 Windows 注册表
• 病毒或恶意软件感染
• 损坏的 Windows 系统文件
• 硬件问题

在处理重要的事情或随便看电影时，视频调度程序内部错误^{(Video Scheduler Internal Error)}可能随时发生，但是当发生此错误时，您将无法在系统上保存任何工作，因为您将直接面对此BSOD错误，之后您有重新启动您的 PC 会丢失所有工作。因此，不要浪费任何时间，让我们看看如何使用下面列出的故障排除指南实际修复此错误。

修复视频调度程序内部错误

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1： ^{(Method 1: )}运行系统文件检查器 (SFC) 和检查磁盘 (CHKDSK)^{(Run System File Checker (SFC) and Check Disk (CHKDSK))}

1. 按Windows Key + X，然后单击 命令提示符（管理员）。^{( Command Prompt (Admin).)}

2.现在在cmd中输入以下内容并回车：

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

3.等待^(Wait)上述过程完成，完成后，重新启动PC。

4. 接下来，从Fix File System Errors with Check Disk Utility(CHKDSK)运行 CHKDSK 。^{(Fix File System Errors with Check Disk Utility(CHKDSK).)}

5. 让上述过程完成并再次重新启动您的 PC 以保存更改。

方法二：运行DISM（部署镜像服务和管理）^{(Method 2: Run DISM (Deployment Image Servicing and Management))}

1. 按Windows Key + X，然后选择命令提示符（管理员）。^{(Command Prompt (Admin).)}

2.在cmd中一一输入以下命令，回车^(Enter)：

Dism /Online /Cleanup-Image /StartComponentCleanup
Dism /Online /Cleanup-Image /RestoreHealth

3. 如果上述命令不起作用，请尝试以下操作：

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

注意：^(Note:) 将^(Replace)C:RepairSourceWindows 替换为修复源的位置（Windows 安装^{(Windows Installation)}或恢复光盘^{(Recovery Disc)}）。

4. 不要运行SFC /scannow，而是运行DISM命令来验证系统的完整性：

Dism /Online /Cleanup-Image /CheckHealth

5. 重新启动您的 PC 以保存更改。

方法三：卸载显卡驱动^{(Method 3: Uninstall Graphic Card Driver)}

1. 右键单击​​设备管理器下的^{(device manager)}NVIDIA显卡，然后选择卸载。^{( Uninstall.)}

2. 如果要求确认，请选择是。^(Yes.)

3. 在Windows 搜索^{(Windows Search)}中键入 control，然后从搜索结果中单击控制面板。^{(Control Panel)}

4. 从控制面板中，单击卸载程序。^{( Uninstall a Program.)}

5.接下来，卸载所有与Nvidia相关的东西。^{(uninstall everything related to Nvidia.)}

6. 重新启动系统以保存更改并再次^{(again download the setup)}从制造商的网站下载设置。在我们的例子中，我们有NVIDIA显卡可以从Nvidia 网站^{(Nvidia website)}下载设置。

7. 确定已删除所有内容后，再次尝试安装驱动程序^{( try installing the drivers again)}。设置应该可以正常工作。

方法 4：更新显卡驱动程序^{(Method 4: Update Graphic Card Drivers)}

1. 按Windows Key + R然后键入“ devmgmt.msc ”（不带引号）并按 Enter 打开设备管理器^{(Device Manager)}。

2. 接下来，展开显示适配器^{( Display adapters)}并右键单击您的Nvidia 显卡^{(Nvidia Graphic Card)}并选择启用。^(Enable.)

3. 再次完成此操作后，右键单击您的显卡并选择“更新驱动程序软件。^{(Update Driver Software.)}”

4. 选择“自动搜索更新的驱动软件^{(Search automatically for updated driver software)}”，让它完成这个过程。

5.如果上述步骤可以解决您的问题，那么很好，如果没有，请继续。

6. 再次选择“更新驱动程序软件^{(Update Driver Software)}”，但这次在下一个屏幕上选择“浏览我的计算机以查找驱动程序软件。^{(Browse my computer for driver software.)}”

7. 现在选择“让我从计算机上的设备驱动程序列表中选择”。^{(“Let me pick from a list of device drivers on my computer.”)}

8. 最后，从列表中为您的Nvidia 显卡^{(Nvidia Graphic Card)}选择兼容的驱动程序，然后单击下一步。

9. 让上述过程完成并重新启动您的 PC 以保存更改。更新显卡后，^(Graphic)您可能能够修复视频调度程序内部错误。^{(Fix Video Scheduler Internal Error.)}

如果您无法使用上述步骤更新显卡驱动程序，那么您可以使用其他方式更新显卡驱动程序^{(update graphics drivers using other ways)}。

方法 5：运行磁盘清理^{(Method 5: Run Disk Cleanup)}

磁盘清理是^(Disk)Windows上的内置工具，可让您根据需要删除所需的不必要和临时文件。要运行磁盘清理^{(To run disk cleanup)}，

1. 转到这台电脑或我的电脑，然后右键单击 C: 驱动器以选择属性。^{(Properties.)}

2. 现在从属性^(Properties)窗口中，单击 容量下的磁盘清理。^{(Disk Cleanup)}

3. 计算磁盘清理将释放多少空间^{(how much space Disk Cleanup will free.)}需要一些时间。

4. 现在点击描述下方底部的清理系统文件^{(Clean up system files)}。

5. 在下一个窗口中，确保选择Files to delete下的所有内容，然后单击 OK 运行Disk Cleanup。注意：^(Note:)我们正在寻找“以前的 Windows 安装^{(Previous Windows Installation(s))}”和“临时 Windows 安装文件^{(Temporary Windows Installation files)}”（如果可用），请确保它们已被选中。

6. 让磁盘清理^{(Disk Cleanup)}完成，然后重新启动 PC 以保存更改。再次尝试运行安装程序，这可能能够修复 Video Scheduler 内部错误。^{(Fix Video Scheduler Internal Error.)}

方法6：运行CCleaner^{(Method 6: Run CCleaner)}

1.下载并安装CCleaner^{(Download and install CCleaner)}。

2. 双击 setup.exe 开始安装。

3. 点击安装按钮^{(Install button)}开始安装CCleaner。按照^(Follow)屏幕上的说明完成安装。

4. 启动应用程序并从左侧菜单中选择自定义。^(Custom.)

5. 现在看看您是否需要勾选除默认设置以外的任何内容。完成后，单击分析^(Analyze)。

6. 分析完成后，点击“ Run CCleaner ”按钮。

7. 让CCleaner运行它，这将清除系统上的所有缓存和 cookie。

8. 现在，要进一步清理系统，请选择注册表选项卡，^{( Registry tab,)}并确保选中以下内容。

9. 完成后，单击“扫描问题^{(Scan for Issues)}”按钮并允许CCleaner进行扫描。

10. CCleaner将显示Windows 注册表^{(Windows Registry)}的当前问题，单击修复选定的问题^{( the Fix selected Issues)}按钮。

11. 当 CCleaner 询问“您要备份对注册表的更改吗？^{(Do you want backup changes to the registry?)}” 选择是。^(Yes.)

12. 备份完成后，选择修复所有选定问题。^{(Fix All Selected Issues.)}

13. 重新启动您的 PC 以保存更改。

此方法似乎可以修复^{(Fix Video Scheduler Internal Error)}由于恶意软件或病毒而影响系统的 Video Scheduler 内部错误。否则，如果您有第三方防病毒^(Antivirus)或恶意软件^(Malware)扫描程序，您也可以使用它们从系统中删除恶意软件^{(remove malware from your system)}。

方法 7：确保 Windows 是最新的^{(Method 7: Make sure Windows is up to date)}

1. 按 Windows Key + I 打开设置，然后单击 更新和安全。^{( Update & Security.)}

2. 从左侧，菜单点击Windows Update。

3. 现在单击“检查更新^{(Check for updates)}”按钮以检查任何可用的更新。

4. 如果有任何更新待处理，请单击下载并安装更新。^{(Download & Install updates.)}

5. 下载更新后，安装它们，您的 Windows 将成为最新版本。

6. 安装更新后，重新启动 PC 以保存更改。

受到推崇的：^{(Recommended:)}

• 修复显示驱动程序停止响应并已恢复错误^{(Fix Display driver stopped responding and has recovered error)}
• 如何修复隐藏属性选项灰显^{(How to Fix Hidden Attribute option greyed out)}
• 修复网络摄像头在 Windows 10 中不起作用^{(Fix Webcam not working in Windows 10)}
• 修复 Windows 时间服务不自动启动^{(Fix Windows Time service doesn’t start automatically)}

就是这样，您已成功修复 Video Scheduler 内部错误^{(Fix Video Scheduler Internal Error)}，但如果您对这篇文章仍有任何疑问，请随时在评论部分提出。

Fix Video Scheduler Internal Error

The VIDEO_SCHEDULER_INTERNAL_ERROR occurs if you have recently installed new hardware or ѕoftware which causes conflict bеtween the video drivers and Windows 10. The Video Scheduler Internal Errоr is a Bluе Screen of Death (ΒSOD) error that indicatеs that the video scheduler has detectеd a fatal viоlation. The error is mostly caused by the Graphics card, and it’s drivers issuе аnd has a stop error code 0x00000119.

When you see the VIDEO_SCHEDULER_INTERNAL_ERROR the PC will usually restart and before this error occurs your PC will most likely freeze for a few minutes. The Display seems to crashes every now & then which seems to be frustrating a lot of users. But before moving forward to the solution to this problem, we must completely understand what is causing this VIDEO_SCHEDULER_INTERNAL_ERROR and then ready to fix this error.

Various causes of Video Scheduler Internal Error:

• Incompatible, corrupted or outdated Graphics drivers
• Corrupt Windows Registry
• Virus or Malware infection
• Corrupt Windows system files
• Hardware issues

The Video Scheduler Internal Error can occur any time while working on something important or casually watching a movie but when this error occurs you won’t be able to save any work on your system as you will directly face this BSOD error and after which you have to restart your PC losing all your work. So without wasting any time let’s see how to actually fix this error with the below-listed troubleshooting guide.

Fix Video Scheduler Internal Error

Make sure to create a restore point just in case something goes wrong.

Method 1: Run System File Checker (SFC) and Check Disk (CHKDSK)

1. Press Windows Key + X then click on Command Prompt (Admin).

2. Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

3. Wait for the above process to finish and once done, restart your PC.

4. Next, run CHKDSK from Fix File System Errors with Check Disk Utility(CHKDSK).

5. Let the above process complete and again reboot your PC to save changes.

Method 2: Run DISM (Deployment Image Servicing and Management)

1. Press Windows Key + X then select Command Prompt (Admin).

2. Type the following command into cmd one by one and hit Enter:

Dism /Online /Cleanup-Image /StartComponentCleanup
Dism /Online /Cleanup-Image /RestoreHealth

3. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

4. Don’t run SFC /scannow, instead run DISM command to verify the integrity of the system:

Dism /Online /Cleanup-Image /CheckHealth

5. Reboot your PC to save changes.

Method 3: Uninstall Graphic Card Driver

1. Right-click on your NVIDIA graphic card under the device manager and select Uninstall.

2. If asked for confirmation, select Yes.

3. Type control in Windows Search then click on Control Panel from the search result.

4. From Control Panel, click on Uninstall a Program.

5. Next, uninstall everything related to Nvidia.

6. Reboot your system to save changes and again download the setup from the manufacturer’s website. In our case, we have the NVIDIA graphics card to download the setup from the Nvidia website.

7. Once you are sure that you have removed everything, try installing the drivers again. The setup should work without any problems.

Method 4: Update Graphic Card Drivers

1. Press Windows Key + R then type “devmgmt.msc” (without quotes) and hit enter to open Device Manager.

2. Next, expand Display adapters and right-click on your Nvidia Graphic Card and select Enable.

3. Once you have done this again, right-click on your graphic card and select “Update Driver Software.”

4. Select “Search automatically for updated driver software” and let it finish the process.

5. If the above step could fix your problem, then very good, if not then continue.

6. Again select “Update Driver Software” but this time on the next screen select “Browse my computer for driver software.”

7. Now select “Let me pick from a list of device drivers on my computer.”

8. Finally, select the compatible driver from the list for your Nvidia Graphic Card and click Next.

9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Video Scheduler Internal Error.

If you’re not able to update the graphics driver using the above steps, then you can update graphics drivers using other ways.

Method 5: Run Disk Cleanup

Disk cleanup is a built-in tool on Windows that will let you delete the required unnecessary and temporary files depending upon your need. To run disk cleanup,

1. Go to This PC or My PC and right-click on the C: drive to select Properties.

2. Now from the Properties window, click on Disk Cleanup under capacity.

3. It will take some time to calculate how much space Disk Cleanup will free.

4. Now click Clean up system files in the bottom under Description.

5. In the next window, make sure to select everything under Files to delete and then click OK to run Disk Cleanup. Note: We are looking for “Previous Windows Installation(s)” and “Temporary Windows Installation files” if available, make sure they are checked.

6. Let the Disk Cleanup complete and then restart your PC to save changes. Again try to run the setup, and this may be able to Fix Video Scheduler Internal Error.

Method 6: Run CCleaner

1. Download and install CCleaner.

2. Double-click on the setup.exe to start the installation.

3. Click on the Install button to start the installation of CCleaner. Follow on-screen instructions to complete the installation.

4. Launch the application and from the left-hand side menu, select Custom.

5. Now see if you need to checkmark anything other than the default settings. Once done, click on Analyze.

6. Once the analysis is complete, click on the “Run CCleaner” button.

7. Let CCleaner run its course, and this will clear all cache and cookies on your system.

8. Now, to clean your system further, select the Registry tab, and ensure the following are checked.

9. Once done, click on the “Scan for Issues” button and allow CCleaner to scan.

10. CCleaner will show the current issues with Windows Registry, click on the Fix selected Issues button.

11. When CCleaner asks “Do you want backup changes to the registry?” select Yes.

12. Once your backup has completed, select Fix All Selected Issues.

13. Reboot your PC to save changes.

This method seems to Fix Video Scheduler Internal Error where the system is affected because of the malware or virus. Otherwise, if you have third-party Antivirus or Malware scanners, you can also use them to remove malware from your system.

Method 7: Make sure Windows is up to date

1. Press Windows Key + I to open Settings then click on Update & Security.

2. From the left-hand side, menu clicks on Windows Update.

3. Now click on the “Check for updates” button to check for any available updates.

4. If any updates are pending, then click on Download & Install updates.

5. Once the updates are downloaded, install them, and your Windows will become up-to-date.

6. After the updates are installed, reboot your PC to save changes.

Recommended:

• Fix Display driver stopped responding and has recovered error
• How to Fix Hidden Attribute option greyed out
• Fix Webcam not working in Windows 10
• Fix Windows Time service doesn’t start automatically

That’s it you have successfully Fix Video Scheduler Internal Error but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• Fix Task Scheduler Error One或更多指定参数无效

• 如何修复 Windows 10 中的视频调度程序内部错误蓝屏

• Fix Error 0X80010108在Windows 10中

• 如何Fix Application Error 0xc0000005

• Fix Windows Update Error Code 0x80072efe

• Windows 10上的Fix Device不是Migrated Error

• 如何Fix Application Load Error 5:0000065434

• Fix Error 1603：安装过程中发生致命错误

• Fix Windows Store Cache May Be损坏Error

• 如何Fix Application Error 0xc000007b

• Fix Windows Update Error 0x80246002

• Device Manager中的Fix Network Adapter Error Code 31

• Fix Media Creation Tool Error 0x80042405-0xa001a

• Fix Minecraft Error未能Write Core Dump

• Fix Omegle Error Connecting至Server（2021）

• Fix Windows 10使用Error C1900101-4000D安装Fails

• Fix U-Verse Modem Gateway Authentication Failure Error

• Fix Could不是Steam Network Error的Connect

• 如何Fix Application Error 523

• 如何Fix Windows Update Error 80072ee2