当您使用某个应用程序或玩游戏时，它突然死机、崩溃或退出，然后您的 PC 屏幕关闭然后再次打开。突然，您会看到一条弹出错误消息，显示“显示^(Display)驱动程序停止响应并已恢复”或“显示^(Display)驱动程序 nvlddmkm 停止响应并已成功恢复”，并详细说明了驱动程序信息。当Windows的^(Windows)超时检测^{(Timeout Detection)}和恢复^(Recovery)( TDR ) 功能确定图形^(Graphics)处理单元^{(Processing Unit)}( GPU ) 在允许的时间范围内没有响应并重新启动Windows 显示驱动程序时，将显示该错误^{(Windows Display Driver)} 以避免完全重启。

显示^(Display)驱动程序停止响应并已恢复错误的主要原因：

• 过时、损坏或不兼容的显示驱动程序^{(Display Driver)}
• 显卡故障
• 过热图形^(Graphics)处理单元^(Unit)( GPU )
• TDR 设置的超时时间较少，GPU响应
• 运行程序过多导致冲突

这些都是可以触发“显示驱动程序停止响应并已恢复”错误的所有可能原因。如果您开始在系统中更频繁地看到此错误，则这是一个严重的问题并需要进行故障排除，但如果您每年看到此错误一次，则不是问题，您可以继续正常使用您的 PC。因此，不要浪费任何时间，让我们看看如何使用下面列出的故障排除步骤实际修复此错误。

显示^(Display)驱动程序停止响应并已恢复错误 [已解决]

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法一：卸载显卡驱动^{(Method 1: Uninstall Graphic Card Driver)}

1. 右键单击​​设备管理器下的NVIDIA显卡，然后选择卸载。^{( Uninstall.)}

2. 如果要求确认，请选择是^(Yes)。

3. 按Windows Key + X，然后选择控制面板。^{(Control Panel.)}

4. 从控制面板中，单击卸载程序。^{( Uninstall a Program.)}

5.接下来，卸载所有与Nvidia相关的东西。^{(uninstall everything related to Nvidia.)}

6. 重新启动系统以保存更改并再次^{(again download the setup)} 从制造商的网站下载设置。

5. 确定已删除所有内容后，再次尝试安装驱动程序^{( try installing the drivers again)}。设置应该可以正常工作。

方法二：更新显卡驱动^{(Method 2: Update Graphic Card Drivers)}

1. 按 Windows 键 + R 然后输入devmgmt.msc 并按回车键打开设备管理器^{(Device Manager)}。

2. 接下来，展开显示适配器^{( Display adapters)}并右键单击您的Nvidia 显卡^{(Nvidia Graphic Card)}并选择启用。^(Enable.)

3. 再次完成此操作后，右键单击您的显卡并选择“更新驱动程序软件。^{(Update Driver Software.)}”

4. 选择“自动搜索更新的驱动软件^{(Search automatically for updated driver software)}”，让它完成这个过程。

5.如果上述步骤可以解决您的问题，那么很好，如果没有，请继续。

6. 再次选择“更新驱动程序软件^{(Update Driver Software)}”，但这次在下一个屏幕上选择“浏览我的计算机以查找驱动程序软件。^{(Browse my computer for driver software.)}”

7. 现在。选择“让我从计算机上的设备驱动程序列表中选择”。^{(“Let me pick from a list of device drivers on my computer.”)}

8. 最后，从您的Nvidia 显卡^{(Nvidia Graphic Card)}列表中选择兼容的驱动程序，然后单击下一步。

9. 让上述过程完成并重新启动您的 PC 以保存更改。更新显卡后，^(Graphic)您可能能够修复显示驱动程序停止响应并已恢复错误。^{(Fix Display driver stopped responding and has recovered error.)}

方法3：调整视觉效果以获得更好的性能^{(Method 3: Adjust visual effects for better performance)}

同时打开的程序、浏览器窗口或游戏过多会占用大量内存，从而导致上述错误。要解决此问题，请尝试关闭尽可能多的未使用的程序和窗口。

通过禁用视觉效果来提高系统性能也有助于解决显示^(Display)驱动程序停止响应并已恢复错误：

1. 右键单击​​此 PC 或我的电脑^(Computer)，然后选择属性。^{(Properties.)}

2. 然后单击左侧菜单中的高级系统设置。^{(Advanced system settings)}

注意：^(Note:)您也可以通过按Windows Key + R高级^(Advanced)系统设置，然后键入sysdm.cpl并按 Enter。

3.如果还没有，请切换到高级选项卡，然后单击^{(Advanced tab)}性能下的设置。^{(Performance.)}

4. 现在选择“调整以获得最佳性能”复选框。^{(Adjust for best performance.)}”

5. 单击应用，然后单击确定。^{( OK.)}

6. 重新启动您的 PC 以保存更改。

方法 4：增加 GPU 处理时间（注册表修复）^{(Method 4: Increase GPU processing time (Registry Fix))}

1. 按 Windows 键 + R 然后键入regedit并按Enter打开注册表编辑器^{(Registry Editor)}。

2. 导航到以下注册表项：

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers

3. 确保您已从左侧窗格中突出显示 GrphicsDivers，然后右键单击右侧窗格中的空白区域。单击^(Click) 新建^(New)，然后选择特定于您的Windows 版本（32 位或 64 位）的以下注册表值：^{(Windows (32 bit or 64 bit):)}

对于 32 位 Windows：^{(For 32-bit Windows:)}

一种。选择DWORD（32 位）值^{(DWORD (32-bit) Value)}并键入TdrDelay作为名称。

湾。双击^(Double)TdrDelay并在Value data 字段中输入8并单击 OK。

对于 64 位 Windows：^{(For 64-bit Windows:)}

一种。选择QWORD（64 位）值^{(QWORD (64-bit) Value)}并键入TdrDelay作为名称。

湾。双击 TdrDelay 并在Value data 字段中^(Value)输入 8^{(enter 8)}并单击 OK。

4. 关闭注册表编辑器^{(Registry Editor)}并重新启动您的 PC 以保存更改。

方法 5：将 DirectX 更新到最新版本^{(Method 5: Update DirectX to the Latest Version)}

要修复显示^{(Fix Display)}驱动程序停止响应并已恢复错误，您应该始终更新您的DirectX。确保您已安装最新版本的最佳方法是从 Microsoft 官方网站下载DirectX Runtime Web Installer 。

方法 6：确保 CPU 和 GPU 没有过热^{(Method 6: Make Sure the CPU and GPU are not Overheating)}

确保^(Make)CPU和GPU的温度不超过最高工作温度。确保^(Make)处理器正在使用散热器或风扇。有时过多的灰尘会导致过热问题，因此建议清理通风孔和显卡以解决此问题。

方法 7：将硬件设置为默认设置^{(Method 7: Set Hardware to Default Settings)}

超频处理器 ( CPU ) 或显卡^(Graphics)也可能导致“显示驱动程序停止响应并已恢复”错误，要解决此问题，请确保将硬件^(Hardware)设置为默认设置。这样可以保证系统没有超频，硬件可以正常工作。

方法 8：硬件故障^{(Method 8: Faulty Hardware)}

如果您仍然无法修复上述错误，则可能是因为显卡故障或损坏。要测试您的硬件，请将其带到当地维修店并让他们测试您的GPU。如果它有故障或损坏，请更换一个新的，您将能够一劳永逸地解决问题。

受到推崇的：^{(Recommended:)}

• 修复隐藏属性选项灰显^{(Fix Hidden Attribute option greyed out)}
• 如何修复默认打印机不断变化的问题^{(How to Fix Default Printer Keeps Changing Issue)}
• 修复网络摄像头在 Windows 10 中不起作用^{(Fix Webcam not working in Windows 10)}
• 修复 Windows 时间服务不自动启动^{(Fix Windows Time service doesn’t start automatically)}

就是这样，您已成功修复显示驱动程序停止响应并已恢复错误 [已解决] ^{(Fix Display driver stopped responding and has recovered error [SOLVED] )}，但如果您对这篇文章仍有任何疑问，请随时在评论部分提出。

Display driver stopped responding and has recovered error [SOLVED]

When you use an application or plaу games, and suddenly it freezes, crashes or exit followed by your PC screen going off and then turning baсk on again. And suddenly you see a pop-up error message saying “Display driver stopped responding and hаs recovered” or “Display drivеr nvlddmkm stopped responding аnd has successfully recoverеd” wіth driver info in details. The error is displayed when Timeoυt Detectiоn and Reсovery (TDR) feature of Windows determines that the Graphics Processing Unit (GPU) haѕ not responded within the allowed time frame and havе restarted the Windows Display Driver to avoid a full restаrt.

The main cause of Display driver stopped responding and has recovered error:

• Outdated, corrupted or incompatible Display Driver
• Faulty Graphic Card
• Overheating Graphics Processing Unit (GPU)
• TDR’s set timeout is less for the GPU to respond
• Too many running programs causing the conflict

These are all the possible causes that can trigger the “Display driver stopped responding and has recovered” error. If you started seeing this error more frequently in your system, it’s a serious issue and needs troubleshooting, but if you see this error once in a year, it’s not a problem, and you can continue to use your PC normally. So without wasting any time, let’s see how to actually fix this error with the below-listed troubleshooting steps.

Display driver stopped responding and has recovered error [SOLVED]

Make sure to create a restore point just in case something goes wrong.

Method 1: Uninstall Graphic Card Driver

1. Right-click on your NVIDIA graphic card under device manager and select Uninstall.

2. If asked for confirmation, select Yes.

3. Press Windows Key + X then select Control Panel.

4. From Control Panel, click on Uninstall a Program.

5. Next, uninstall everything related to Nvidia.

6. Reboot your system to save changes and again download the setup from the manufacturer’s website.

5. Once you are sure that you have removed everything, try installing the drivers again. The setup should work without any problems.

Method 2: Update Graphic Card Drivers

1. Press Windows Key + R then type devmgmt.msc and hit enter to open Device Manager.

2. Next, expand Display adapters and right-click on your Nvidia Graphic Card and select Enable.

3. Once, you have done this again, right-click on your graphic card and select “Update Driver Software.”

4. Select “Search automatically for updated driver software” and let it finish the process.

5. If the above step could fix your problem, then very good, if not then continue.

6. Again select “Update Driver Software” but this time on the next screen select “Browse my computer for driver software.”

7. Now. select “Let me pick from a list of device drivers on my computer.”

8. Finally, select the compatible driver from your Nvidia Graphic Card list and click Next.

9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Display driver stopped responding and has recovered error.

Method 3: Adjust visual effects for better performance

Too many programs, browser windows or games open at the same time can use up a lot of memory and thus cause the above error. To fix this issue, try to close as many programs and windows that are not in use.

Increasing the performance of your system by disabling visual effects can also help to resolve Display driver stopped responding and has recovered error:

1. Right-click on This PC or My Computer and select Properties.

2. Then click Advanced system settings from the left-hand menu.

Note: You could also directly open Advanced system settings by pressing Windows Key + R then type sysdm.cpl and hit Enter.

3. Switch to Advanced tab if not already there and click Settings under Performance.

4. Now select the checkbox which says “Adjust for best performance.”

5. Click Apply, followed by OK.

6. Reboot your PC to save changes.

Method 4: Increase GPU processing time (Registry Fix)

1. Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2. Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers

3. Make sure you have highlighted GrphicsDivers from the left-hand window pane and then right-click in an empty area in the right window pane. Click New and then select the following registry value specific to your version of Windows (32 bit or 64 bit):

For 32-bit Windows:

a. Select DWORD (32-bit) Value and type TdrDelay as the Name.

b. Double click on TdrDelay and enter 8 in the Value data field and click OK.

For 64-bit Windows:

a. Select QWORD (64-bit) Value and type TdrDelay as the Name.

b. Double click on TdrDelay and enter 8 in the Value data field and click OK.

4. Close the Registry Editor and reboot your PC to save changes.

Method 5: Update DirectX to the Latest Version

To Fix Display driver stopped responding and has recovered error, you should always update your DirectX. The best way to make sure you have the latest version installed is to download DirectX Runtime Web Installer from Microsoft’s official website.

Method 6: Make Sure the CPU and GPU are not Overheating

Make sure that the temperature of the CPU and GPU do not exceed the maximum operating temperature. Make sure the heatsink or fan is being used with the processor. Sometimes excessive dust can cause overheating issues, so it’s advised to clean out the vents and graphic card to fix this issue.

Method 7: Set Hardware to Default Settings

An overclocked processor (CPU) or Graphics card can also cause the “Display driver stopped responding and has recovered” error and to resolve this make sure you set the Hardware to default settings. This will ensure that the system is not overclocked and the hardware can function normally.

Method 8: Faulty Hardware

If you’re still unable to fix the above error, then it may be because the graphic card is faulty or damaged. To test your hardware, take it to a local repair shop and let them test your GPU. If it’s faulty or damaged replace with a new one and you will be able to fix the issue once and for all.

Recommended:

• Fix Hidden Attribute option greyed out
• How to Fix Default Printer Keeps Changing Issue
• Fix Webcam not working in Windows 10
• Fix Windows Time service doesn’t start automatically

That’s it you have successfully Fix Display driver stopped responding and has recovered error [SOLVED] but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related posts

• USB Device不在Windows 10工作[求助]

• Windows 10中的Mouse Pointer Lags [已解决]

• WiFi在Windows 10中断断开连接[已解决]

• Windows 10 Creator Update无法安装[已解决]

• Windows 10上的Computer Restarts Randomly [已解决]

• 触摸板在 Windows 10 中不起作用 [已解决]

• Windows 10 中的无效 MS-DOS 功能错误 [已解决]

• 端点映射器没有更多可用的端点 [已解决]

• Action Center不适用于Windows 10 [已解决]

• Windows无法完成extraction error [已解决]

• Laptop Keyboard无法正常工作[已解决]

• Windows 10 上的 NVIDIA 安装程序失败错误 [已解决]

• Windows 资源管理器已停止工作 [已解决]

• Fix Windows Could不是Complete安装[解决]

• 您的PC未连接到Internet错误[已解决]

• Windows Store Error Code 0x8000ffff [已解决]

• USB 端口在 Windows 10 中不工作 [已解决]

• Windows 10缺少Fix MSVCR120.dll [已解决]

• 该文件对于目标文件系统来说太大 [已解决]

• 发生磁盘读取错误 [已解决]