修复端点映射器没有更多可用的端点： ^{(Fix There are no more endpoints available from the endpoint mapper: )}如果您遇到此错误，那么这意味着您正在尝试安装打印机或者您正在网络中共享您的驱动器。通常^(Generally)，当您尝试加入域但Windows服务已损坏并因此与不允许您加入该特定域并最终导致错误的其他服务发生冲突时，会出现^{(error occur)}“没有更多^{(No More)}可用的端点”错误。无论如何，这个错误非常烦人，这就是为什么疑难解答在这里通过以下疑难解答步骤修复此错误的原因。

尝试将客户端加入 Active Directory 域^{(Directory domain)}时，您可能会收到以下错误：

The following error occurred attempting to join the domain <domain>:
端点映射器中没有更多可用的端点。^{(There are no more endpoints available from the endpoint mapper.)}
错误 1753：端点映射器没有更多可用的端点。^{(Error 1753: There are no more endpoints available from the endpoint mapper.)}

端点映射器^{(endpoint mapper)}没有更多可用的端点[已解决]

确保^(Make)创建一个还原点^{(restore point)} 以防万一^{(case something)}出现问题。

方法一：删除 Internet 密钥以解除 RPC 限制^{(Method 1: Delete the Internet key to remove RPC restriction)}

1.按 Windows 键 + R 然后键入regedit并按Enter打开注册表编辑器^{(Registry Editor)}。

2.导航到以下注册表项^{(registry key)}：

Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\Rpc\Internet

3.右键单击Internet 键^{(Internet key)}并选择删除。^(Delete.)

4.重新启动您的 PC 以保存更改。

方法 2：验证远程过程调用 (RPC) 服务是否已启动^{(Method 2: Verify that Remote Procedure Call (RPC) Services are Started)}

1.按 Windows 键 + R 然后键入services.msc并按 Enter。

2.找到以下服务：

远程过程调用^{(Remote Procedure Call )}
远程过程调用定位器^{(Remote Procedure Call Locator)}
ByProcessManager

如果您在添加打印机时遇到问题，请确保以下服务也在运行：

打印后台处理程序^{(Print Spooler )}
DCOM 服务器进程启动程序^{(DCOM Server Process Launcher)}
RPC 端点映射程序^{(RPC Endpoint Mapper)}

3.右键单击并选择上述服务的属性^{( Properties)}。

4.接下来，确保启动类型为自动^{( Startup type is Automatic)}并且服务正在运行。^{(services are running.)}

5.如果上述服务停止，请确保从属性窗口运行它们。^(Run)

6.重新启动您的PC以保存更改，并且可以解决“端点映射器中没有更多可用的端点”^{(There are no more endpoints available from the endpoint mapper)}错误。^{(error “)}

方法 3：临时禁用 ^{(Method 3: Temporary Disable )}防病毒 ^{(Antivirus )}和 ^(and )防火墙^(Firewall)

有时防病毒程序^{(Antivirus program)}可能会导致“端点映射器没有更多可用的端点”^{(“There are no more endpoints available from the endpoint mapper”)}，为了验证这里不是这种情况，您需要在有限的时间内禁用防病毒软件，以便检查错误是否仍然出现当杀毒软件关闭时。

1.右键单击系统托盘中的防病毒程序图标^{( Antivirus Program icon)}，然后选择禁用。^(Disable.)

2.接下来，选择防病毒软件将保持禁用^{( Antivirus will remain disabled.)}的时间范围。^{(time frame)}

注意：选择尽可能少的时间，例如 15^{(example 15)}分钟或 30 分钟。

3.完成后，再次尝试连接到WiFi 网络^{(WiFi network)}并检查错误是否解决。

4.按 Windows 键 + I 然后选择控制面板。^{( Control Panel.)}

5.下一步，点击系统和安全。^{( System and Security.)}

6.然后点击Windows防火墙。^{(Windows Firewall.)}

7.现在从左侧窗格中单击^{(left window pane click)}打开或关闭Windows 防火墙^{(Turn Windows Firewall)}。

8.选择关闭 Windows 防火墙并重新启动您的 PC。^{(Select Turn off Windows Firewall and restart your PC. )}再次尝试连接到WiFi 网络^{(WiFi network)}，看看问题是否已解决。

如果上述方法^{(method doesn)}不起作用，请确保按照完全相同的步骤再次打开防火墙。

方法 4：运行打印疑难解答^{(Method 4: Run Print Troubleshooter)}

1.在Windows 搜索栏中^{(Windows Search bar and click)}键入“疑难解答”，然后单击疑难解答。^{(Troubleshooting.)}

2.接下来，从左侧窗格中选择^{(left window pane select)} 查看全部。^{(View all.)}

3.然后从排除计算机^{(Troubleshoot computer)}问题列表中选择打印机。^(Printer.)

4.按照屏幕上的说明运行打印机故障排除^{(Printer Troubleshooter run)}程序。

5.重新启动您的PC，错误“端点映射器中没有更多可用的端点^{(There are no more endpoints available from the endpoint mapper)}”可能会得到解决。

方法 5：更改高级共享设置^{(Method 5: Change advanced sharing settings)}

1.右键单击系统托盘上的无线图标，然后单击^{(system tray and click)}打开^{(Wireless icon)}网络和共享中心。^{(Open Network and Sharing Center.)}

2.单击左侧窗口中的更改高级共享设置。^{( Change advanced sharing settings)}

3.启用网络发现、文件和打印机共享以及公共文件夹。^{(Network discovery, File and printer sharing and Public folder.)}

4.单击保存^(Save)更改并关闭所有内容。重新启动您的 PC 以保存更改。

方法 6：共享错误的注册表修复^{(Method 6: Registry fix for Sharing error)}

1.下载 MpsSvc.reg^(MpsSvc.reg)和BFE.reg文件^(BFE.reg)。双击^{(Double-click)}它们以运行并将这些文件添加到注册表。

2.重新启动您的电脑以保存更改。

3.按 Windows 键 + R 然后键入regedit并按Enter打开注册表编辑器^{(Registry Editor)}。

4.接下来，导航到以下注册表项^{(registry key)}：

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BFE

5.右键单击 BFE 键并选择权限。^{(select Permissions.)}

6.在下一个打开的窗口中，单击添加按钮。^{(Add button.)}

7. 在输入^(Enter)要选择的对象名称字段下键入“ Everyone ”（不带引号），然后单击检查名称。^{(Check Names.)}

8.现在验证名称后单击确定。^(OK.)

9.Everyone 现在应该被添加到组或用户名部分。^{( Group or user names section.)}

10.确保从列表中选择所有人^(Everyone)并在允许列中选中完全控制选项。^{( Full Control)}

11.单击应用，然后单击确定。

12.按 Windows 键 + R 然后键入services.msc并按 Enter。

13.找到以下服务并右键单击它们，然后选择属性：^{(Properties:)}

过滤引擎^{(Filtering Engine)}
Windows 防火墙^{(Windows Firewall)}

14.在“属性^(Properties)”窗口中启用它们（单击“开始^(Start)” ）并确保它们的“启动类型^{(Startup type)}”设置为“自动”。^(Automatic.)

15.就是这样，您可能已经 修复了端点映射器中没有更多可用的端点^{(Fix There are no more endpoints available from the endpoint mapper)}，但如果没有，则在下一步中运行SFC 和 CHKDSK 。^{(SFC and CHKDSK)}

方法 7：运行系统文件检查器 (SFC) 和检查磁盘 (CHKDSK)^{(Method 7: Run System File Checker (SFC) and Check Disk (CHKDSK))}

1.按Windows Key + X然后单击命令提示符（管理员）。^{( Command Prompt(Admin).)}

2.现在在cmd中输入以下内容并回车：

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

3.等待上述过程完成，完成后重新启动您的电脑。

4.接下来，从这里运行 CHKDSK 使用检查磁盘实用程序 (CHKDSK) 修复文件系统错误。^{(Fix File System Errors with Check Disk Utility(CHKDSK).)}

5.让上述过程完成并再次重新启动您的 PC 以保存更改。

方法8：运行DISM（部署映像服务和管理）^{(Method 8: Run DISM (Deployment Image Servicing and Management))}

1.按Windows Key + X然后选择命令提示符（管理员）。^{(Command Prompt(Admin).)}

2.在cmd中输入以下命令并回车：

重要提示：^(Important:) 当您进行 DISM 时，您需要准备好 Windows 安装介质^{(Windows Installation Media ready)}。

DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess

注意：^(Note:) 将^(Replace)C:RepairSourceWindows 替换为您的修复源的位置^{(repair source)}

2.按回车键运行上述命令并等待^{(command and wait)}该过程完成，通常需要15-20分钟。

NOTE: If the above command doesn't work then try on the below: 
Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

3.DISM过程完成后，在^{(DISM process)}cmd^{(cmd and hit)} 中键入以下内容并按Enter：  sfc /scannow

4.让系统文件检查器运行^{(System File Checker run)}，一旦完成，重新启动您的电脑。检查 Windows 10 慢速关机^{( Windows 10 Slow Shutdown)}问题是否已解决。

为你推荐：^{(Recommended for you:)}

• 修复程序^{(Fix Program)}链接和图标打开Word 文档^{(Word Document)}
• 如何 修复 Internet Explorer 11^{(Fix Internet Explorer 11)}无响应
• 修复 文件对于目标文件系统^{(destination file system)}来说太大
• 如何在Word中更改^(Word)自动保存时间^{(Auto-save time)}

就是这样，您已成功修复端点映射器中没有更多可用的端点^{(Fix There are no more endpoints available from the endpoint mapper)}，但如果您对这篇文章仍有任何疑问，请随时在评论部分询问。

There are no more endpoints available from the endpoint mapper [SOLVED]

Fix There are no more endpoints available from the endpoint mapper: If you’re facing this error then this means either you are trying to install a printer or you’re sharing your drive within your network. Generally ‘No More Endpoints Available’ error occur when you try to join a domain but the Windows services are corrupted and therefore, conflicting with other services which won’t let you join that particular domain and ultimately causing the error. Anyway, this error is very annoying and that’s why troubleshooter is here to fix this error via the following troubleshooting steps.

When attempting to join a client to an Active Directory domain, you may receive the following error:

The following error occurred attempting to join the domain <domain>:
There are no more endpoints available from the endpoint mapper.
Error 1753: There are no more endpoints available from the endpoint mapper.

There are no more endpoints available from the endpoint mapper [SOLVED]

Make sure to create a restore point just in case something goes wrong.

Method 1: Delete the Internet key to remove RPC restriction

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry key:

Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\Rpc\Internet

3.Right-click on the Internet key and select Delete.

4.Reboot your PC to save changes.

Method 2: Verify that Remote Procedure Call (RPC) Services are Started

1.Press Windows Key + R then type services.msc and hit Enter.

2.Locate the following services:

Remote Procedure Call
Remote Procedure Call Locator
ByProcessManager

If you are trouble adding a printer then make sure following services are also running:

Print Spooler
DCOM Server Process Launcher
RPC Endpoint Mapper

3.Right-click and select Properties for above services.

4.Next, make sure the Startup type is Automatic and the services are running.

5.If the above services are stopped make sure to Run them from properties window.

6.Reboot your PC to save changes and the error “There are no more endpoints available from the endpoint mapper” may be resolved.

Method 3: Temporary Disable Antivirus and Firewall

Sometimes the Antivirus program can cause “There are no more endpoints available from the endpoint mapper” and in order to verify this is not the case here, you need to disable your antivirus for a limited time so that you can check if the error still appears when the antivirus is off.

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

2.Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3.Once done, again try to connect to the WiFi network and check if the error resolves or not.

4.Press Windows Key + I then select Control Panel.

5.Next, click on System and Security.

6.Then click on Windows Firewall.

7.Now from the left window pane click on Turn Windows Firewall on or off.

8.Select Turn off Windows Firewall and restart your PC. Again try to connect to the WiFi network and see if the issue is resolved or not.

If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.

Method 4: Run Print Troubleshooter

1.Type “troubleshooting” in Windows Search bar and click on Troubleshooting.

2.Next, from the left window pane select View all.

3.Then from the Troubleshoot computer problems list select Printer.

4.Follow on-screen instruction and let the Printer Troubleshooter run.

5.Restart your PC and the error “There are no more endpoints available from the endpoint mapper”  may be resolved.

Method 5: Change advanced sharing settings

1.Right-click on Wireless icon on system tray and click on Open Network and Sharing Center.

2.Click on Change advanced sharing settings in the left-hand window.

3.Enable the Network discovery, File and printer sharing and Public folder.

4.Click Save changes and close everything. Reboot your PC to save changes.

Method 6: Registry fix for Sharing error

1.Download MpsSvc.reg and BFE.reg files. Double-click on them to run and to add these files to the registry.

2.Reboot your PC to save changes.

3.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

4.Next, navigate to the following registry key:

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BFE

5.Right-click the BFE key and select Permissions.

6.In the next window that opens, click the Add button.

7.Type “Everyone” (without quotes) under the field Enter the object names to select and then click on Check Names.

8.Now once the name is verified click OK.

9.Everyone should be now added to the Group or user names section.

10.Make sure to select Everyone from the list and check mark Full Control option in Allow column.

11.Click Apply followed by OK.

12.Press Windows Key + R then type services.msc and hit Enter.

13.Find the below services and right-click on them then select Properties:

Filtering Engine
Windows Firewall

14.Enable them both in the Properties window (click on Start) and make sure their Startup type is set to Automatic.

15.That’s it you may have Fix There are no more endpoints available from the endpoint mapper but if not then run SFC and CHKDSK in the next step.

Method 7: Run System File Checker (SFC) and Check Disk (CHKDSK)

1.Press Windows Key + X then click on Command Prompt(Admin).

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

3.Wait for the above process to finish and once done restart your PC.

4.Next, run CHKDSK from here Fix File System Errors with Check Disk Utility(CHKDSK).

5.Let the above process complete and again reboot your PC to save changes.

Method 8: Run DISM (Deployment Image Servicing and Management)

1.Press Windows Key + X then select Command Prompt(Admin).

2.Enter the following command in cmd and hit enter:

Important: When you DISM you need to have Windows Installation Media ready.

DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source

2.Press enter to run the above command and wait for the process to complete, usually, it takes 15-20 minutes.

NOTE: If the above command doesn't work then try on the below: 
Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

3.After the DISM process if complete, type the following in the cmd and hit Enter: sfc /scannow

4.Let System File Checker run and once it’s complete, restart your PC. Check if the Windows 10 Slow Shutdown problem is resolved or not.

Recommended for you:

• Fix Program links and icons open Word Document
• How to Fix Internet Explorer 11 Not Responding
• Fix The file is too large for the destination file system
• How to change Auto-save time in Word

That’s it you have successfully Fix There are no more endpoints available from the endpoint mapper but if you still have any queries regarding this post feel free to ask them in the comment’s section.

Related posts

• USB Device不在Windows 10工作[求助]

• Windows 10中的Mouse Pointer Lags [已解决]

• Display driver停止响应并恢复错误[已解决]

• WiFi在Windows 10中断断开连接[已解决]

• Windows 10 Creator Update无法安装[已解决]

• 您已使用临时profile error登录[已解决]

• 鼠标和键盘在 Windows 10 中不起作用 [已解决]

• 发生磁盘读取错误 [已解决]

• Fix Ethernet不在Windows 10中工作[解决]

• Nvidia Kernel Mode Driver已停止响应[已解决]

• 修复 Windows 10 中的键盘输入延迟 [已解决]

• 您当前的安全设置不允许下载此文件 [已解决]

• WiFi 受限连接问题 [已解决]

• Windows无法完成extraction error [已解决]

• 您的PC未连接到Internet错误[已解决]

• Laptop Keyboard无法正常工作[已解决]

• Microsoft Virtual Wifi Miniport Adapter driver问题[解决]

• 帮助！颠倒或侧向屏幕问题[解决]

• Fix您的Computer是Low在内存警告[解决]

• Action Center不适用于Windows 10 [已解决]