错误^(Error)代码 31 可能由阻止操作系统 ( Windows ) 为特定设备加载必要驱动程序的多种原因引起。基本上^(Basically)，Microsoft Virtual Wifi Miniport Adapter只是一个虚拟化您的网络适配器的虚拟设备；这与VMWare虚拟化不同的操作系统相同。

您将收到以下错误消息：^{(You will receive the following error message:)}

此设备无法正常工作，因为 Windows 无法加载此设备所需的驱动程序。（代码 31）^{(This device is not working properly because Windows cannot load the drivers required for this device. (Code 31))}

换句话说，Microsoft Virtual Wifi Miniport Adapter是无线托管网络^{(Wireless Hosted Network)}的驱动程序，有助于将物理Wifi虚拟化为多个虚拟Wifi（虚拟^(Virtual)无线适配器）。值得庆幸的是，可以通过多种方法解决此错误代码 31，因此无需浪费任何时间，让我们看看如何使用下面列出的故障排除步骤实际修复此错误。

Microsoft Virtual Wifi Miniport Adapter驱动程序问题 [已解决]

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：禁用托管网络^{(Method 1: Disable Hosted Network)}

1. 按 Windows 键 + X，然后单击命令提示符（管理员）。^{( Command Prompt (Admin).)}

2. 在 cmd 中输入^(Enter)以下命令并在每个命令后按 Enter：

netsh wlan 停止托管网络^{(netsh wlan stop hostednetwork)}
netsh wlan set hostednetwork mode=disallow

3. 重新启动您的 PC 并查看您是否能够修复 Microsoft Virtual Wifi Miniporct 适配器驱动程序问题（错误代码 31）。^{(Fix Microsoft Virtual Wifi Miniporct Adapter driver problem (Error code 31).)}

方法 2：确保 Windows 是最新的^{(Method 2: Make sure Windows is up to date)}

1. 按 Windows Key +  I 打开设置，然后单击 更新和安全。^{( Update & Security.)}

2. 从左侧，菜单点击Windows Update。

3. 现在单击“检查更新^{(Check for updates)}”按钮以检查任何可用的更新。

4. 如果有任何更新待处理，请单击下载并安装更新。^{(Download & Install updates.)}

5. 下载更新后，安装它们，您的 Windows 将成为最新版本。

方法 3：运行硬件疑难解答^{(Method 3: Run the Hardware troubleshooter)}

1. 在Windows 搜索^{(Windows Search)}栏中键入“疑难解答”，然后单击疑难解答。^{(Troubleshooting.)}

2. 接下来，单击硬件和声音。^{(Hardware and Sound.)}

3.然后从列表中选择硬件和设备。^{(Hardware and Devices.)}

4.按照屏幕上的说明运行疑难解答。

方法 4：更新 Microsoft 虚拟 WiFi 微型端口适配器驱动程序^{(Method 4: Update Microsoft Virtual WiFi Miniport Adapter Drivers)}

按照此处的步骤操作：http: http://www.wintips.org/fix-error-code-31-wan-miniport/

1. 按 Windows 键 + R 然后键入devmgmt.msc并按 Enter 打开设备管理器。^{(Device Manager.)}

2. 展开网络适配器^{(Network Adapters)}，然后右键单击Microsoft Virtual WiFi Miniport Adapter并选择更新驱动程序软件。^{(Update Driver Software.)}

3.首先，选择“自动搜索更新^{(Search automatically for updated driver software)}的驱动软件”，让它更新驱动。

4. 如果上述步骤没有解决问题，请选择“浏览我的电脑以查找驱动程序软件。^{(Browse my computer for driver software.)}”

5. 在下一个屏幕上，取消选中 显示兼容硬件^{( Show compatible hardware)}，然后选择Microsoft Virtual Wifi Miniport Adapter并单击下一步。

6. 如果询问，请选择无论如何安装驱动程序。

7. 重新启动您的 PC 以保存更改。

方法5：卸载无线网络适配器^{(Method 5: Uninstall Wireless Network Adapter)}

1. 按 Windows 键 + R 然后输入devmgmt.msc并按Enter打开设备管理器^{(Device Manager)}。

2.展开网络适配器^{(Expand Network Adapters)}，然后右键单击您的无线连接并选择卸载。^(Uninstall.)

3. 如果要求确认，请选择是。^(Yes.)

4. 重新启动您的电脑，驱动程序将自动安装。

受到推崇的：^{(Recommended:)}

• 修复在 Windows 10 中无法更改屏幕分辨率^{(Fix Can’t Change Screen Resolution in Windows 10)}
• 修复周年更新后锁定屏幕上未出现的背景图像^{(Fix Background Images Not Appearing on Lock Screen After Anniversary Update)}
• 如何修复我们无法安装 Windows 10 错误 0XC190010 – 0x20017^{(How to Fix We couldn’t install Windows 10 Error 0XC190010 – 0x20017)}
• 修复文件已损坏且无法修复^{(Fix File is Damaged and Could Not Be Repaired)}

就是这样，您已成功修复 Microsoft Virtual Wifi Miniport Adapter 驱动程序问题（错误代码 31） ^{(Fix Microsoft Virtual Wifi Miniport Adapter driver problem (Error code 31) )}如果您对这篇文章仍有任何疑问，请随时在评论部分询问他们。

Microsoft Virtual Wifi Miniport Adapter driver problem [SOLVED]

An Error code 31 can be caused by anу number of reasons that prevent thе operating system (Windows) from loading the neсessary drivers for a particular device. Basically, Microsoft Virtual Wifi Miniport Adapter is јust а virtυal device which virtualizes your network adapter; it is same as VMWare νirtualizeѕ different operating system.

You will receive the following error message:

This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

In other words, Microsoft Virtual Wifi Miniport Adapter is the drivers for Wireless Hosted Network that help in virtualization of a physical Wifi into more than one virtual Wifi (Virtual wireless adapter). Thankfully there are a number of methods through which this error code 31 can be resolved, so without wasting any time lets see how to actually fix this error with the below-listed troubleshooting steps.

Microsoft Virtual Wifi Miniport Adapter driver problem [SOLVED]

Make sure to create a restore point just in case something goes wrong.

Method 1: Disable Hosted Network

1. Press Windows Key + X then click Command Prompt (Admin).

2. Type the following command into cmd and hit Enter after each one:

netsh wlan stop hostednetwork
netsh wlan set hostednetwork mode=disallow

3. Reboot your PC and see if you’re able to Fix Microsoft Virtual Wifi Miniporct Adapter driver problem (Error code 31).

Method 2: Make sure Windows is up to date

1. Press Windows Key + I to open Settings then click on Update & Security.

2. From the left-hand side, menu clicks on Windows Update.

3. Now click on the “Check for updates” button to check for any available updates.

4. If any updates are pending, then click on Download & Install updates.

5. Once the updates are downloaded, install them, and your Windows will become up-to-date.

Method 3: Run the Hardware troubleshooter

1. Type “troubleshooting” in the Windows Search bar and click on Troubleshooting.

2. Next, click on Hardware and Sound.

3.Then from the list select Hardware and Devices.

4.Follow on-screen instructions to run the troubleshooter.

Method 4: Update Microsoft Virtual WiFi Miniport Adapter Drivers

Follow steps from here: http://www.wintips.org/fix-error-code-31-wan-miniport/

1. Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2. Expand Network Adapters then right-click on Microsoft Virtual WiFi Miniport Adapter and select Update Driver Software.

3. First, select “Search automatically for updated driver software” and let it update the drivers.

4. If the above step doesn’t fix the problem, then select “Browse my computer for driver software.”

5. On the next screen, uncheck Show compatible hardware and then select Microsoft Virtual Wifi Miniport Adapter and click Next.

6. Select to anyway install the driver if asked.

7. Reboot your PC to save changes.

Method 5: Uninstall Wireless Network Adapter

1. Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2. Expand Network Adapters then right-click on your Wireless connection and select Uninstall.

3. If asked for confirmation, select Yes.

4. Reboot your PC and drivers will be automatically installed.

Recommended:

• Fix Can’t Change Screen Resolution in Windows 10
• Fix Background Images Not Appearing on Lock Screen After Anniversary Update
• How to Fix We couldn’t install Windows 10 Error 0XC190010 – 0x20017
• Fix File is Damaged and Could Not Be Repaired

That’s it you have successfully Fix Microsoft Virtual Wifi Miniport Adapter driver problem (Error code 31) if you still have any queries regarding this post feel free to ask them in the comment’s section.

Related posts

• 什么是Microsoft Virtual WiFi Miniport Adapter & How启用它？

• 什么是 Microsoft 虚拟 WiFi 微型端口适配器？

• WiFi在Windows 10中断断开连接[已解决]

• USB Device不在Windows 10工作[求助]

• Windows 10中的Mouse Pointer Lags [已解决]

• 您的PC未连接到Internet错误[已解决]

• Laptop Keyboard无法正常工作[已解决]

• Error 1962：未发现操作系统[已解决]

• Windows 10上的Computer Restarts Randomly [已解决]

• Windows无法连接到打印机[已解决]

• Windows 10 Creator Update无法安装[已解决]

• Airplane Mode未在Windows 10中关闭[已解决]

• 目录名称无效错误 [已解决]

• [解决] WiFi连接但Windows 10上没有互联网

• USB 端口在 Windows 10 中不工作 [已解决]

• 修复 Windows 10 中的键盘输入延迟 [已解决]

• Windows 10缺少Pin至Start Menu Option [已解决]

• HDMI Port不适用于Windows 10 [已解决]

• Display driver停止响应并恢复错误[已解决]

• Windows体验索引冻结[已解决]