这是有关如何在Windows 11/10计算机中重置或清除 CMOS的指南。^{(reset or clear CMOS)}有时，当您的计算机无法启动或遇到其他错误时，您可能需要重置或清除CMOS以修复它。那么，让我们看看如何做同样的事情。

如何清除或重置 CMOS

这些是您可以重置或清除Windows 计算机的CMOS的方法。^(CMOS)

1. 从 BIOS 重置 CMOS
2. 清除 CMOS

让我们详细谈谈它们。

1]从BIOS重置CMOS

您可以使用BIOS 菜单^{(BIOS Menu)}轻松重置CMOS。我们要将所有BIOS设置更改为默认设置以重置CMOS。重新启动计算机并启动进入 BIOS^{(boot into BIOS)}。

当您的计算机启动时，屏幕会要求您按一个键以启动^(Boot)进入BIOS。您的系统的正确键可能是 F1、F2、F10等 - 这取决于您的制造商。当您的计算机正在启动时，您可能能够在启动屏幕的左下角或右下角看到哪个键。因此，请务必密切注意打开计算机后出现的第一个屏幕。

进入主屏幕后，在Exit选项卡下（对于我的 HP PC），我可以看到Load Setup Defaults选项。您可以使用箭头键在系统上选择类似的选项，然后按 Enter^(Enter)。或者您可以简单地按F9键以显示一个显示^(F9)立即加载默认配置^{(Load default configuration now)}的白屏？单击是^(Yes)。

现在，查找其中包含“默认”一词的选项。通常，它是重置BIOS的按钮。选择它，保存更改（检查您的屏幕，您将看到一个可以按以保存设置的键），然后退出BIOS。

2]用螺丝刀^{(Screwdriver)}或跳线^(Jumper)清除BIOS

如果在启动过程中无法进入BIOS设置，请按照以下步骤清除CMOS。您可能需要硬件技术人员的服务。

• 关闭所有连接到计算机的外围设备。
• 从交流电源断开电源线。
• 卸下电脑盖。
• 找到板上的电池。电池可以在水平或垂直电池座中，也可以通过电线连接到板载接头。

如果电池在支架中，请注意电池上 + 和 - 的方向。使用中号一字螺丝刀^{(Screwdriver)}，轻轻地将电池从其连接器中撬出。

如果电池通过电线连接到板载接头，请从板载接头断开电线。

• 等待一^{(Wait one)}小时，然后重新连接电池。
• 重新盖上电脑盖。
• 重新插入计算机和所有设备。

您现在可以尝试启动BIOS - 它应该成功完成。

确保您已接地，否则静电会损坏您的计算机部件^{(Make sure you are grounded, otherwise, static electricity can damage parts of your computer)}

或者，如果您可以在那里使用跳线^(Jumper)，请将其设置为Clear或CLR位置并重新启动计算机。

确保在计算机启动后将跳线放回原处。^{(Make sure that you put the Jumper back after your computer has booted.)}

希望这篇文章能让您重置或清除CMOS。

How to reset or clear CMOS on Windows 11/10 PC

This iѕ a guide on how to reset or clear CMOS in a Windows 11/10 computer. Sometimes, when your computer fails to boot or you face some other error, you may want to reset or clear CMOS in order to fix it. So, let us see how to do the same.

How to Clear or Reset CMOS

These are the ways by which you can reset or clear the CMOS of your Windows computer.

1. Reset CMOS from BIOS
2. Clear CMOS

Let us talk about them in detail.

1] Reset CMOS From BIOS

You can easily reset CMOS using the BIOS Menu. We are going to change all the BIOS settings to default in order to reset CMOS. Restart your computer and boot into BIOS.

When your computer starts, a screen will ask you to press a key in order to Boot into BIOS. The right key for your system could be F1, F2, F10, etc. – and it depends on your manufacturer. You may be able to see which key, in the bottom left or right side of your boot screen, when your computer is booting. So, make sure to pay close attention to the first screen that appears once you switch on your computer.

Once on the main screen, under the Exit tab (In the case of my HP PC) I could see a Load Setup Defaults option. You could select such a similar option on your system using the arrow keys and hit Enter. Or you could simply hit the F9 key to display a white screen that says Load default configuration now? Click on Yes.

Now, look for the option that has the word “default” in it. Usually, it is the button to reset your BIOS. Select it, save the changes (check your screen, you will see a key that you can press to save the settings), and exit BIOS.

2] Clear BIOS with Screwdriver or Jumper

If you cannot enter the BIOS setup during boot, follow the steps below to clear the CMOS. You may require the services of a hardware technician.

• Turn off all peripheral devices connected to the computer.
• Disconnect the power cord from the AC power source.
• Remove the computer cover.
• Find the battery on the board. The battery may be in a horizontal or vertical battery holder or connected to an onboard header with a wire.

If the battery is in a holder, note the orientation of the + and – on the battery. With a medium flat-blade Screwdriver, gently pry the battery-free from its connector.

If the battery is connected to an onboard header with a wire, disconnect the wire from the onboard header.

• Wait one hour, then reconnect the battery.
• Put the computer cover back on.
• Plug the computer and all devices back in.

You can now try booting into BIOS – it should complete successfully.

Make sure you are grounded, otherwise, static electricity can damage parts of your computer

Alternatively, if you can use a Jumper there, set it to Clear or CLR position and restart your computer.

Make sure that you put the Jumper back after your computer has booted.

Hopefully, this post will you to reset or clear CMOS.

Related posts

• 如何在Windows 10计算机上更新BIOS

• 如何将Legacy更改为UEFI，而无需重新安装Windows 11/10

• 如何在File Explorer中展示Details pane在Windows 10

• 如何使用Windows 10的Charmap and Eudcedit内置工具

• 如何检查在Windows 10的Shutdown and Startup Log

• 如何在Windows 10 Control Panel中打开System Properties

• 什么是PLS file？如何在Windows 11/10中创建PLS file？

• 如何在地图上Network Drive或Windows 11/10添加FTP Drive

• 如何在Windows 10中添加Trusted Site

• 启用Network Connections而在Modern Standby上Windows 10

• 在Windows 10中编辑或保存文件时，PDF text消失了

• CPU在Windows 11/10中的全speed or capacity不运行

• 在Windows 10中使用DISM时，远程procedure call失败了错误

• Best Laptop Battery Test software & Diagnostic tools用于Windows 10

• 视窗10同步设置不工作灰色

• Windows 10屏幕不断自动刷新本身

• 如何在Windows 10计算机中更改默认Webcam

• 如何在Windows 10卸载或重新安装Notepad

• 如何添加或更改Time Server在Windows 10

• Convert AVCHD到MP4使用Windows 10这些免费的转换器