KMODE_EXCEPTION_NOT_HANDLED错误检查表明Windows或内核模式驱动程序访问了DISPATCH_LEVEL或更高级别的分页内存。这似乎是典型的软件驱动程序错误，不太可能是由硬件问题引起的。第三方驱动程序e1d65x64.sys与来自Intel Corporation的^{(Intel Corporation)}Intel(R) Gigabit Adapter-NIC/Wired network NDIS (Network Driver Interface Specification) 6.x驱动程序相关联，被确定为此系统错误的可能根本原因。这篇文章为这个与驱动程序相关的 BSOD 错误^{(driver-related BSOD error)}提供了最合适的解决方案。

在 Windows 10 计算机上玩游戏时，您可能会遇到此错误。

修复 e1d65x64.sys) 蓝屏错误

如果您遇到此问题，您可以尝试以下我们推荐的解决方案（不分先后顺序），看看是否有助于解决问题。

1. 运行蓝屏在线疑难解答^{(Blue Screen Online Troubleshooter)}
2. 运行驱动程序验证程序
3. 更新网络设备驱动程序
4. 扫描内存问题
5. 停止超频（如果适用）
6. 执行系统还原

让我们看一下关于列出的每个解决方案所涉及的过程的描述。

如果能正常登录就好了；否则，您必须 启动进入安全模式^{(boot into Safe Mode)}，进入 高级启动选项屏幕^{(Advanced Startup options screen)}，或 使用安装媒体启动^{(use the Installation Media to boot)} 才能执行这些说明。

在继续解决方案之前，请确保Windows^(Windows)驱动器上有足够的磁盘空间-运行磁盘清理^{(run Disk Cleanup)}，然后运行 ​​CHKDSK^{(run CHKDSK)}。

1]运行^(Run)蓝屏在线疑难解答^{(Blue Screen Online Troubleshooter)}

第一行是运行蓝屏在线疑难解答，看看蓝屏^{(Blue Screen)}错误是否会得到解决。

2]运行驱动程序验证程序

此解决方案要求您  在 Windows 10 设备上运行驱动程序验证程序。您将收到有关每个驱动程序状态的消息 - 按照屏幕上的说明解决问题。

3]更新网络设备驱动程序

请与英特尔支持^{(Intel Support)}、驱动程序及其论坛联系以了解已知问题。如果不存在较新的驱动程序，则可能需要恢复到较旧的稳定版本。

运行英特尔驱动程序和支持助手^{(Intel Driver & Support Assistant)}。

4]扫描内存问题

RAM中的损坏可能会使 Windows 10 不稳定，从而触发蓝屏^{(Blue Screen)}死机^(Death)错误。因此，如果您添加了新的RAM棒，请将其移除并检查是否导致错误。如果没有，那么您需要运行内存测试^{(run a memory test)}。Windows将开始检查RAM中的异常情况。如果发现，您需要更换受影响的RAM。

5]停止^(Stop)超频（如果适用）

如果您对PC 进行了超频，您可以简单地反转更改，看看是否有帮助。

6]执行系统还原

如果您已用尽上述所有解决方案，但BSOD错误仍未解决，您可以将系统恢复到较早的点。当系统正常工作时，这会将您的系统恢复到较早的时间点。

希望这可以帮助！

KMODE EXCEPTION NOT HANDLED (e1d65x64.sys) BSOD error

The KMODE_EXCEPTION_NOT_HANDLED bug check indicates that Windows or a kernel-mode driνer accessed paged memory at DISPATCH_LEVEL or above. This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. A third party driver, e1d65x64.sys associated with Intel(R) Gigabit Adapter-NIC/Wired network NDIS (Network Driver Interface Specification) 6.x driver from Intel Corporation is identified as the probable root cause of this system error. This post provides the most suitable solutions to this driver-related BSOD error.

You may encounter this error when gaming on your Windows 10 computer.

Fix e1d65x64.sys) Blue Screen error

If you’re faced with this issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.

1. Run the Blue Screen Online Troubleshooter
2. Run Driver Verifier
3. Update network device drivers
4. Scan for memory issues
5. Stop over-clocking (if applicable)
6. Perform System Restore

Let’s take a look at the description of the process involved concerning each of the listed solutions.

If you can log in normally, good; else you will have to boot into Safe Mode, enter Advanced Startup options screen, or use the Installation Media to boot to be able to carry out these instructions.

Before you proceed with the solutions, be sure you have sufficient disk space on the Windows drive – run Disk Cleanup and then run CHKDSK.

1] Run the Blue Screen Online Troubleshooter

The first line of action is to run the Blue Screen Online Troubleshooter and see if the Blue Screen error will be resolved.

2] Run Driver Verifier

This solution requires you to run Driver Verifier on your Windows 10 device. You will get a message about the status of each driver – follow the onscreen instructions to fix the problem.

3] Update network device drivers

Check with Intel Support, drivers, and their forums for known issues. If no newer drivers exist then it may be necessary to revert back to an older stable version.

Run Intel Driver & Support Assistant.

4] Scan for memory issues

Corruption in RAM can potentially make Windows 10 unstable and thus trigger Blue Screen Of Death errors. So if you added a new RAM stick, remove it and check if that is causing the error. If not, then you need to run a memory test. Windows will initiate checking for the abnormalities in RAM. If it finds any, you need to replace the affected RAM.

5] Stop over-clocking (if applicable)

If you have overclocked your PC, you can simply reverse the change and see if that helps.

6] Perform System Restore

If you have exhausted all the solutions above but the BSOD error is still unresolved, you can restore your system to an earlier point. This will restore your system to an earlier point when the system was working correctly.

Hope this helps!

Related posts

• SYSTEM THREAD EXCEPTION NOT HANDLED（ldiagio.sys）BSOD

• 在Windows 10 SYSTEM_SERVICE_EXCEPTION（ks.sys）BSOD error

• 在Windows 11/10 Fix EXFAT FILE SYSTEM（volmgr.sys）BSOD error

• DRIVER_VERIFIER_DETECTED_VIOLATION BSOD error在Windows 10

• Fix ndis.sys Windows 10上的BSOD error

• DRIVER_VERIFIER_IOMANAGER_VIOLATION error在Windows 10

• 如何在Windows 10修复Death error的Blue Screen

• 您的电脑遇到了问题，需要重新启动

• INVALID_KERNEL_HANDLE BSOD Error 0x00000093

• 免费Death generator应用程序Windows 10

• Fix PFN_LIST_CORRUPT error在Windows 11/10上

• 修复 Windows 10 上的 FaceIt.sys、rzudd.sys 或 AcmeVideo.sys 蓝屏错误

• Fix Storport.sys BSOD Windows 10上的错误

• Fix 0xc0000135 Blue Screen error在Windows 10

• 蓝屏死机 BSOD 在 Windows 中重启太快？

• Windows 10上的Fix SYSTEM SERVICE EXCEPTION Blue Screen

• Fix intelppm.sys Blue Screen error在Windows 10

• NTFS FILE SYSTEM Blue Screen error在Windows 11/10上

• Fix MSRPC STATE VIOLATION Blue Screen error在Windows 11/10上

• 如何在Windows computer上修复Tcpip.sys Blue Screen Error