始终建议保持Windows操作系统更新,我们需要正确执行此操作。但是,有时Windows更新文件会在某些程序中出现一些问题。大多数用户面临的最常见问题之一是“没有互联网,安全(No internet, secured)” WiFi错误。然而,每个问题都有解决方案,幸运的是,我们有解决这个问题的方法。此问题可能是由于IP 地址(IP address)配置错误造成的。无论原因是什么,我们都会引导您找到解决方案。本文将重点介绍一些修复 Windows 10 中的安全问题 No internet 的方法。(ix No internet, the secured issue in Windows 10.)
修复“没有互联网,安全”的 WiFi 错误(Fix ‘No internet, secured’ WiFi error)
确保 创建一个还原点(create a restore point) 以防万一出现问题。
方法一:更新网卡驱动(Method – 1: Update Network Adapter Driver)
如果您的屏幕上反复出现此问题,则可能是驱动程序问题。因此,我们将从更新您的网络适配器的驱动程序开始。您需要浏览网络适配器制造商的网站(network adapter manufacturer’s website)以下载最新的驱动程序,将其传输到您自己的设备并安装最新的驱动程序。现在您可以尝试连接您的互联网,希望您不会看到“无互联网,安全(No internet, secured)”WiFi 错误。
如果您仍然面临上述错误,则需要手动更新网络适配器驱动程序(update network adapter drivers manually):
1. 按 Windows 键 + R 并键入devmgmt.msc 并按 Enter 打开设备管理器。(device manager.)
2. 展开网络适配器(Network adapters),然后右键单击您的Wi-Fi 控制器( Wi-Fi controller)(例如Broadcom或Intel)并选择更新驱动程序。(Update Drivers.)
3. 在更新驱动程序软件(Update Driver Software)窗口中,选择“浏览我的计算机以查找驱动程序软件。(Browse my computer for driver software.)”
4. 现在选择“让我从计算机上的可用驱动程序列表中进行选择。(Let me pick from a list of available drivers on my computer.)”
5. 尝试从列出的版本更新驱动程序。 (update drivers from the listed versions. )
注意:(Note:)从列表中选择最新的驱动程序,然后单击下一步(Next)。
6. 重新启动您的 PC 以应用更改。
方法 – 2:检查与网络相关的所有硬件(Method – 2: Check All Hardware related to the Network)
首先检查设备的所有与网络相关的硬件,以确保没有硬件问题以进一步移动并实施设置和软件相关的解决方案。
- 检查(Check)网络连接并确保所有电源线均已正确连接。
- 确保(Make)Wi-Fi路由器工作正常并显示良好的信号。
- 确保(Make)您设备上的无线按钮为“ ON ”。
方法 – 3:(Method – 3:) 禁用 WiFi 共享(Disable WiFi Sharing)
如果您使用的是Windows 10操作系统,并且它最近更新并显示“无互联网,安全(No internet, secured)” WiFi错误,则可能是路由器程序与无线驱动程序冲突。这意味着如果您禁用WiFi共享,它可以在您的系统上解决此问题。
1. 按 Windows + R 并键入ncpa.cpl并按 Enter
2. 右键单击无线适配器属性(wireless adapter properties) 并选择属性。(Properties.)
3. 向下滚动并取消选中( uncheck)“ Microsoft 网络适配器多路复用器协议(Microsoft network adapter multiplexor protocol)”。此外,请确保取消选中与WiFi共享相关的任何其他项目。
4. 现在您可以再次尝试连接您的互联网或Wifi路由器。如果问题仍然存在,您可以尝试其他方法。
方法 – 4:(Method – 4:) Modify the TCP/IPv4 Properties
这是修复“无互联网,安全”WiFi错误的另一种方法:(Fix “No internet, secured” WiFi error:)
1. 按 Windows + R 并键入ncpa.cpl并按 Enter
2. 右键单击无线适配器属性(wireless adapter properties) 并选择属性。(Properties.)
3. 现在双击Internet Protocol 4 (TCP/IPv4).
4. 确保选中以下单选按钮:
自动获取IP 地址 自动(Obtain an IP address automatically)
获取 DNS 服务器地址。(Obtain DNS server address automatically.)
5. 现在您需要单击高级按钮(Advanced button)并导航到WINS 选项卡。(WINS tab.)
6. 在NetBIOS setting选项下,您需要Enable NetBIOS over TCP/IP.
7. 最后,在所有打开的框上单击确定以保存更改。(Click OK)
现在尝试连接您的互联网并检查问题是否消失。如果您的问题仍未解决,请不要担心,因为我们有更多方法可以解决。
方法 – 5:更改您的 WiFi 连接的属性(Method – 5: Change the property of your WiFi connection)
1. 按 Windows + R 并键入ncpa.cpl并按 Enter
2. 右键单击无线适配器属性(wireless adapter properties) 并选择属性。(Properties.)
3. 现在,在此属性(Properties)对话框中,确保选中以下选项:
- Microsoft 网络客户端
- Microsoft网络的文件和打印机共享
- 链路层(Link-layer)拓扑发现映射器 I/O 驱动程序
- Internet协议版本 4,或 TCP/IPv4
- Internet协议版本 6,或 TCP/IPv6
- 链路层(Link-layer)拓扑发现响应者
- 可靠的组播协议
4.如果任何选项未选中(unchecked),请选中它,然后单击应用(Apply),然后单击确定。
5. 重新启动您的 PC 以保存更改并重新启动您的路由器。
方法 – 6:(Method – 6:) 更改电源管理属性( Change the Power Management Properties)
要修复“无互联网,安全”WiFi 错误(Fix ‘No internet, secured’ WiFi error),您还可以尝试更改电源管理属性。如果您取消选中“关闭无线网络设备并节省电源”复选框,将会有所帮助。
1. 打开设备管理器(Device Manager)。Press Windows + R并键入devmgmt.msc 然后按 Enter 或按Win + X并从列表中选择设备管理器选项。(Device Manager)
2. 展开网络适配器( Network adapters)条目。
3. 双击您已连接的无线网络(wireless network)设备。
4. 导航到电源管理( Power Management)部分。
5.取消勾选(Uncheck) “允许计算机关闭此设备以节省电源(Allow the computer to turn off this device to save power)”。
方法 – 7:(Method – 7:) 运行网络疑难解答(Run Network Troubleshooter)
1. 按Windows Key + I 打开设置(Settings),然后单击更新和安全。( Update & Security.)
2. 从左侧菜单中,选择疑难解答。( Troubleshoot.)
3. 在疑难解答下,单击Internet 连接( Internet Connections),然后单击运行疑难解答。(Run the troubleshooter.)
4. 按照屏幕上的进一步说明运行疑难解答。
5. 如果上述方法未能修复“无互联网,安全”WiFi错误而不是“疑难解答”(Troubleshoot)窗口,请单击“网络适配器( Network Adapter)” ,然后单击“运行疑难解答”。( Run the troubleshooter.)
5. 重新启动您的 PC 以保存更改。
方法 – 8:重置网络配置(Method – 8: Reset Network Configuration)
很多时候用户通过简单地重置他们的网络配置来解决这个问题。此方法非常简单,因为您需要运行一些命令。
1.在您的设备上使用管理员访问权限或Windows PowerShell打开(Windows PowerShell)命令(Command)提示符。用户可以通过搜索“cmd”或PowerShell然后按Enter来执行此步骤。
2. 打开命令提示符后,运行以下命令:
netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns
3. 再次尝试将您的系统连接到Internet,看看是否可以解决问题。
方法 – 9:禁用 IPv6(Method – 9: Disable IPv6)
1. 右键单击系统托盘上的WiFi图标,然后单击“打开网络和共享中心”。(Open Network and Sharing Center.)”
2. 现在 单击您当前的连接(click on your current connection)以打开 设置。(Settings.)
注意:(Note:)如果您无法连接到您的网络,请使用以太网(Ethernet)电缆进行连接,然后按照此步骤操作。
3. 在刚刚打开的窗口中单击 属性按钮(Properties button) 。
4. 确保 uncheck Internet Protocol Version 6 (TCP/IP).
5.单击确定(Click OK),然后单击关闭(Close)。重新启动(Reboot)您的 PC 以保存更改。
方法 10 (Method 10 )– 重新安装网络适配器(Reinstall Network Adapter)
1. 按 Windows 键 + R 然后输入devmgmt.msc 并按Enter打开设备管理器(Device Manager)。
2.展开网络适配器(Expand Network Adapters)并找到您的网络适配器名称。(your network adapter name.)
3. 确保记下适配器名称(note down the adapter name),以防出现问题。
4. 右键单击您的网络适配器并选择卸载。( Uninstall.)
5. 重新启动您的 PC,Windows 将自动安装(Windows will automatically install the default drivers)网络适配器的默认驱动程序。
6. 如果无法连接到网络,则说明驱动软件(driver software)没有自动安装。
7. 现在您需要访问制造商的网站并从那里下载驱动程序。(download the driver)
9. 安装驱动程序并重新启动您的 PC 以保存更改。
受到推崇的:(Recommended:)
希望(Hopefully)上述所有方法都能帮助您修复“无互联网,安全”的 WiFi 错误(Fix ‘No internet, secured’ WiFi error)。如果你们仍然遇到一些问题,请留下您的评论,我会尽力解决您的技术问题。但是,所有这些方法都是可行的,并为许多Windows 10操作用户解决了这个问题。
Fix 'No internet, secured' WiFi error
Kеeping Windows operating system updаte is always recommended, and we need tо do it properly. However, sometimеs Windows update files comе with some issues in some programs. One of the most common problems that most users face is “No internet, secured” WiFi error. However, every problem comes with solutions & thankfully, we have the solution to this problem. This problem could be caused by the misconfiguration of the IP address. No matter reasons are what, we will guide you to the solution. This article will highlight some methods to fix No internet, the secured issue in Windows 10.
Fix ‘No internet, secured’ WiFi error
Make sure to create a restore point just in case something goes wrong.
Method – 1: Update Network Adapter Driver
If you are having this problem repeatedly on your screen, it could be a driver problem. Therefore, we will start by updating the driver of your network adapter. You need to browse the network adapter manufacturer’s website to download the latest driver, transfer it to your own device and install the latest driver. Now you can try to connect your internet, and hopefully, you will not see the “No internet, secured” WiFi error.’
If you’re still facing the above error then you need to update network adapter drivers manually:
1. Press Windows key + R and type devmgmt.msc and hit Enter to open device manager.
2. Expand Network adapters, then right-click on your Wi-Fi controller(for example Broadcom or Intel) and select Update Drivers.
3. On the Update Driver Software window, select “Browse my computer for driver software.”
4. Now select “Let me pick from a list of available drivers on my computer.”
5. Try to update drivers from the listed versions.
Note: Select the latest drivers from the list and click Next.
6. Reboot your PC to apply changes.
Method – 2: Check All Hardware related to the Network
It is good first to check all network-related hardware of your device to ensure that there is no hardware problem to move further and implement settings and software-related solutions.
- Check network connections and ensure all cords are properly connected.
- Make sure that the Wi-Fi router is working properly and showing good signal.
- Make sure that the wireless button is “ON” on your device.
Method – 3: Disable WiFi Sharing
If you are using Windows 10 operating system and it is recently updated and showing “No internet, secured” WiFi error, it could be router program which is conflicting the wireless driver. It means if you disable the WiFi sharing, it can fix this issue on your system.
1. Press Windows + R and type ncpa.cpl and hit Enter
2. Right-click on the wireless adapter properties and select Properties.
3. Scroll down and uncheck “Microsoft network adapter multiplexor protocol”. Also, make sure to uncheck any other item related to WiFi sharing.
4. Now you can try again to connect your internet or Wifi router. If the problem persists, you can try another method.
Method – 4: Modify the TCP/IPv4 Properties
Here comes another method to Fix “No internet, secured” WiFi error:
1. Press Windows + R and type ncpa.cpl and hit Enter
2. Right-click on the wireless adapter properties and select Properties.
3. Now double-click the Internet Protocol 4 (TCP/IPv4).
4. Make sure the following radio buttons are selected:
Obtain an IP address automatically
Obtain DNS server address automatically.
5. Now you need to click the Advanced button and navigate to the WINS tab.
6. Under the option of NetBIOS setting, you need to Enable NetBIOS over TCP/IP.
7. Finally, Click OK on all the open boxes to save changes.
Now try connecting your internet and check whether the problem is gone or not. If your problem is still not solved, don’t worry, as we have more ways to get it solved.
Method – 5: Change the property of your WiFi connection
1. Press Windows + R and type ncpa.cpl and hit Enter
2. Right-click on the wireless adapter properties and select Properties.
3. Now, in this Properties dialog box, ensure that the following options are checked:
- Client for Microsoft networks
- File and printer sharing for Microsoft networks
- Link-layer topology discovery mapper I/O driver
- Internet protocol version 4, or TCP/IPv4
- Internet protocol version 6, or TCP/IPv6
- Link-layer topology discovery responder
- Reliable Multicast Protocol
4. If anyone option is unchecked, please check it, then click Apply followed by OK.
5. Reboot your PC to save changes and also restart your router.
Method – 6: Change the Power Management Properties
To Fix ‘No internet, secured’ WiFi error, you can also try changing power management properties. It would help if you unchecked the box of “turn off wireless network device and save power”.
1. Open Device Manager. Press Windows + R and type devmgmt.msc then hit Enter or press Win + X and choose Device Manager option from the list.
2. Expand the Network adapters entry.
3. Double-click on the wireless network device you have connected.
4. Navigate to the Power Management section.
5. Uncheck “Allow the computer to turn off this device to save power“.
Method – 7: Run Network Troubleshooter
1. Press Windows Key + I to open Settings then click on Update & Security.
2. From the left-hand menu, select Troubleshoot.
3. Under Troubleshoot, click on Internet Connections and then click Run the troubleshooter.
4. Follow further on-screen instructions to run the troubleshooter.
5. If the above didn’t fix the ‘No internet, secured’ WiFi error than from the Troubleshoot window, click on Network Adapter and then click on Run the troubleshooter.
5. Reboot your PC to save changes.
Method – 8: Reset Network Configuration
Many times users solve this problem by simply resetting their network configuration. This method is quite simple as you need to run some commands.
1. Open Command prompts with admin access or Windows PowerShell on your device. The user can perform this step by searching for ‘cmd’ or PowerShell and then press Enter.
2. Once command prompts open, run the below-given commands:
netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns
3. Again try to connect your system to the Internet and see if it resolves the issue.
Method – 9: Disable IPv6
1. Right-click on the WiFi icon on the system tray and then click on “Open Network and Sharing Center.”
2. Now click on your current connection to open Settings.
Note: If you can’t connect to your network, then use an Ethernet cable to connect and then follow this step.
3. Click the Properties button in the window that just open.
4. Make sure to uncheck Internet Protocol Version 6 (TCP/IP).
5. Click OK, then click Close. Reboot your PC to save changes.
Method 10 – Reinstall Network Adapter
1. Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.
2. Expand Network Adapters and find your network adapter name.
3. Make sure you note down the adapter name just in case something goes wrong.
4. Right-click on your network adapter and select Uninstall.
5. Restart your PC and Windows will automatically install the default drivers for the Network adapter.
6. If you cannot connect to your network, then it means the driver software isn’t automatically installed.
7. Now you need to visit your manufacturer’s website and download the driver from there.
9. Install the driver and reboot your PC to save changes.
Recommended:
Hopefully, all above-mentioned methods will help you to Fix ‘No internet, secured’ WiFi error. In case you guys still experience some issues, leave your comment, I will try to solve your technical problems. However, all these methods are workable and solved this issue for many Windows 10 operating users.