如果您无法连接到互联网或面临有限的互联网连接问题，那么DHCP（动态主机配置协议^{(Dynamic Host Configuration Protocol)}）客户端可能被禁用。要确认这一点，请运行网络诊断，故障排除程序将关闭并显示错误消息DHCP未启用“WiFi”或DHCP未启用“无线网络连接”。

动态主机配置协议^{(Dynamic Host Configuration Protocol)}( DHCP ) 是一种网络协议，由DHCP服务器控制，该服务器将网络配置参数（例如 IP 地址）动态分配给所有启用DHCP的客户端。^(DHCP)DHCP服务器有助于减少网络管理员手动配置这些设置的需要。

现在在Windows 10中，默认情况下启用DHCP，但如果它被某些 3rd 方应用程序或可能是病毒禁用，那么您的无线^(Wireless)接入点将不会运行DHCP服务器，这反过来也不会自动分配 IP 地址，您赢了'无法访问互联网。因此，不要浪费任何时间，让我们看看如何在下面列出的故障排除指南的帮助下修复Windows 10中未启用WiFi的DHCP 。^{(Fix DHCP)}

修复^{(Fix DHCP)}Windows 10中未为WiFi启用 DHCP^(WiFi)

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

在每种方法之后，请确保检查是否启用了DHCP，以便按照本指南进行操作：

1.打开命令提示符^{(Command Prompt)}。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

2. 在 cmd 中输入以下命令并回车^(Enter)：

ipconfig /all

3. 向下滚动到无线 LAN 适配器 Wi-Fi^{(Wireless LAN adapter Wi-Fi)}，在DHCP Enabled下它应该显示为“ yes ”。

4. 如果在DHCP Enabled下看到“ ^{(DHCP Enabled)}No ” ，则该方法无效，您还需要尝试其他解决方案。

方法 1：运行网络疑难解答^{(Method 1: Run Network Troubleshooter)}

1. 按 Windows 键 + R 然后输入ncpa.cpl并按Enter打开Network Connections。

2. 右键单击​​您的Wifi 连接^{(Wifi Connection)}并选择诊断。^(Diagnose.)

3. 让网络疑难解答^{(Network Troubleshooter)}运行，它会给你以下错误信息：DHCP is not enabled for “Wireless Network Connection”。

4. 现在单击下一步^(Next)以解决问题。另外，单击“以管理员身份尝试此修复^{(Try This Repairs as an Administrator)}”。

5. 在下一个提示中，单击Apply this Fix。

6. 重新启动您的 PC 以保存更改并查看您是否能够修复 Windows 10 中未为 WiFi 启用 DHCP。^{(Fix DHCP is not enabled for WiFi in Windows 10.)}

方法 2：通过网络适配器设置启用 DHCP^{(Method 2: Enable DHCP via Network Adapter Settings)}

1. 按 Windows 键 + R，然后键入ncpa.cpl并按 Enter。

2. 右键单击​​您的Wifi 连接^{(Wifi Connection)}并选择属性。^{(Properties.)}

3. 从Wi-Fi属性窗口中，选择Internet 协议版本 4^{(Internet Protocol Version 4)}，然后单击属性。^{(Properties.)}

4.现在确保选中^(checkmark)“自动获取IP地址^{(Obtain an IP address automatically)}”和“自动获取DNS服务器地址”。

5. 单击确定^(OK)，然后再次单击确定并单击关闭^(Close)。

6. 重新启动您的 PC 以保存更改。

方法三：开启DHCP客户端服务^{(Method 3: Enable DHCP client service)}

1. 按 Windows 键 + R 然后键入services.msc并按 Enter。

2. 在此列表中找到DHCP 客户端^{(DHCP Client)}，然后双击它以打开其属性。

3. 确保启动类型设置为自动^{(Startup type is set to Automatic)}，如果服务尚未运行，请单击启动。^(Start)

4. 单击应用，然后单击确定。

5. 重新启动您的 PC 以保存更改并查看您是否能够修复 Windows 10 中未为 WiFi 启用 DHCP。^{( Fix DHCP is not enabled for WiFi in Windows 10.)}

方法 4：暂时禁用防病毒和防火墙^{(Method 4: Temporarily Disable Antivirus and Firewall)}

有时防病毒^(Antivirus)程序可能会导致 错误^{(an error )}，为了验证这里不是这种情况，您需要在有限的时间内禁用您的防病毒软件，以便您可以检查当防病毒软件关闭时错误是否仍然出现。

1. 右键单击​​系统托盘中的 防病毒程序图标^{( Antivirus Program icon)} 并选择 禁用。^(Disable.)

2. 接下来，选择 防病毒软件将保持禁用的时间范围。^{( Antivirus will remain disabled.)}

注意：选择尽可能少的时间，例如 15 分钟或 30 分钟。

3. 完成后，再次尝试连接以打开Google Chrome并检查错误是否解决。

4. 从开始菜单^{(Start Menu)}搜索栏搜索控制面板，点击打开 控制面板。^{( Control Panel.)}

5. 接下来，单击 系统和安全，^{( System and Security)} 然后单击 Windows 防火墙。^{(Windows Firewall.)}

6. 现在从左侧窗格中单击 打开或关闭 Windows 防火墙。^{( Turn Windows Firewall on or off.)}

7. 选择关闭 Windows 防火墙并重新启动您的 PC。^{(Select Turn off Windows Firewall and restart your PC.)}

再次尝试打开Google Chrome并访问之前显示^{(Google Chrome)} 错误 ^( error. )的网页。如果上述方法不起作用，请确保按照完全相同的步骤 再次打开防火墙。^{( turn on your Firewall again.)}

方法5：取消选中代理^{(Method 5: Uncheck Proxy)}

1. 按Windows Key + R然后键入“ inetcpl.cpl ”并按回车键打开Internet 属性。^{(Internet Properties.)}

2. 接下来，转到连接选项卡^{(Connections tab)}并选择 LAN 设置。

3.取消选中为您的LAN使用^{(Uncheck Use)}代理服务器^{(Proxy Server)}并确保选中“自动检测设置^{(Automatically detect settings)}”。

4.单击确定^{(Click Ok)}然后应用^(Apply)并重新启动您的 PC。

方法 6：重置 Winsock ^{(Method 6: Reset Winsock )}and TCP/IP

1.打开命令提示符^{(Command Prompt)}。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

2.再次^(Again)，打开Admin Command Prompt并输入以下内容，然后在每个命令后按 Enter：

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset

3. 重新启动以应用更改。Netsh Winsock 重置^{(Netsh Winsock Reset)}命令似乎修复了 Windows 10 中未为 WiFi 启用 DHCP。^{(Fix DHCP is not enabled for WiFi in Windows 10.)}

方法 7：重新安装网络驱动程序^{(Method 7: Reinstall your Network driver)}

1. 按 Windows 键 + R 然后键入devmgmt.msc并按 Enter。

2.展开网络^{(Expand Network)}适配器，然后右键单击您的WiFi适配器并选择卸载。^(Uninstall.)

3. 再次单击卸载^(Uninstall)以确认。

4. 现在右键单击网络适配器^{(Network Adapters)}并选择扫描硬件更改。^{(Scan for hardware changes.)}

5. 重新启动您的 PC，Windows将自动安装默认驱动程序。

方法 8：更新无线适配器驱动程序^{(Method 8: Update Wireless Adapter drivers)}

1. 按 Windows 键 + R 然后键入devmgmt.msc并按 Enter。

2. 右键单击​​网络适配器下的无线适配器，^{(wireless adapter under Network Adapters)}然后选择更新驱动程序。^{(Update Driver.)}

3. 选择“浏览我的电脑以查找驱动程序软件。^{(Browse my computer for driver software.)}”

4. 再次单击“让我从计算机上的可用驱动程序列表中进行选择。^{(Let me pick from a list of available drivers on my computer.)}”

5. 从列表中选择最新的可用驱动程序，然后单击下一步^(Next)。

6. 重新启动您的 PC 以保存更改并查看您是否能够修复 Windows 10 中未为 WiFi 启用 DHCP。^{( Fix DHCP is not enabled for WiFi in Windows 10.)}

方法 9：运行 CCleaner 和 Malwarebytes^{(Method 9: Run CCleaner and Malwarebytes)}

1. 下载并安装 CCleaner  & Malwarebytes。

2. 运行 Malwarebytes^{(Run Malwarebytes)(Run Malwarebytes)} 并让它扫描您的系统以查找有害文件。如果发现恶意软件，它将自动删除它们。

3. 现在运行 CCleaner 并选择 Custom Clean。

4. 在自定义清理下，选择 Windows 选项卡^{(Windows tab)}， 然后确保选中默认值并单击 分析^(Analyze)。

5. 分析完成后，确保您确定要删除要删除的文件。^{(Once Analyze is complete, make sure you’re certain to remove the files to be deleted.)}

6. 最后，点击 Run Cleaner 按钮，让CCleaner运行。

7. 要进一步清理您的系统，请 选择注册表选项卡^{(select the Registry tab)}，并确保选中以下内容：

8. 点击 Scan for Issues 按钮并允许CCleaner扫描，然后点击 Fix Selected Issues 按钮。

9. 当 CCleaner 询问“您要备份对注册表的更改吗？^{(Do you want backup changes to the registry?)}” 选择是^{( select Yes)}。

10. 备份完成后，单击 修复所有选定问题^{(Fix All Selected Issues)} 按钮。

11. 重新启动您的 PC 以保存更改。

受到推崇的：^{(Recommended:)}

• 修复 Steam 错误无法加载 steamui.dll^{(Fix Steam Error Failed to load steamui.dll)}
• 在 Windows 10 中更改驱动器、文件夹或库的模板^{(Change Template of a Drive, Folder, or Library in Windows 10)}
• 修复无法连接到 Steam 网络错误^{(Fix Could Not Connect to the Steam Network Error)}
• 修复 Windows 10 错误的时钟时间问题^{(Fix Windows 10 Wrong Clock Time Issue)}

就是这样，您已成功修复 Windows 10 中未为 WiFi 启用 DHCP，^{(Fix DHCP is not enabled for WiFi in Windows 10)}但如果您对本指南仍有任何疑问，请随时在评论部分询问。

Fix DHCP is not enabled for WiFi in Windows 10

If you are not able to connect to the internеt or facing limitеd intеrnet connectivity problem, then chances are DHCP (Dynamic Host Configuration Protocol) Client might be disabled. To confirm this, run the network diagnostic and the troubleshoоter will close with error message DHCP iѕ nоt enabled for “WiFi” or DHCP is not enabled for “Wireless Network Connection”.

The Dynamic Host Configuration Protocol (DHCP) is a network protocol which is controlled by a DHCP server which dynamically distributes network configuration parameters, such as IP addresses, to all DHCP-enabled clients. DHCP server helps in reducing the need for a network administrator to configure these settings manually.

Now in Windows 10, DHCP is enabled by default, but if it is disabled by some 3rd party apps or possibly a virus then your Wireless access point will not run a DHCP server, which in turn will not automatically assign an IP address and you won’t be able to access the internet. So without wasting any time let’s see how to Fix DHCP is not enabled for WiFi in Windows 10 with the help of below-listed troubleshooting guide.

Fix DHCP is not enabled for WiFi in Windows 10

Make sure to create a restore point just in case something goes wrong.

After each of the methods, make sure to check if the DHCP is enabled or not, in order to do that follow this guide:

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Type the following command into cmd and hit Enter:

ipconfig /all

3. Scroll down to Wireless LAN adapter Wi-Fi and under DHCP Enabled it should read “yes“.

4. If you see “No” under DHCP Enabled, then the method didn’t work, and you need to try other solutions as well.

Method 1: Run Network Troubleshooter

1. Press Windows Key + R then type ncpa.cpl and hit Enter to open Network Connections.

2. Right-click on your Wifi Connection and select Diagnose.

3. Let the Network Troubleshooter run, and it will give you the following error message: DHCP is not enabled for “Wireless Network Connection”.

4. Now click on Next in order to fix the issues. Also, click on “Try This Repairs as an Administrator“.

5. On the next prompt, click Apply this Fix.

6. Reboot your PC to save changes and see if you’re able to Fix DHCP is not enabled for WiFi in Windows 10.

Method 2: Enable DHCP via Network Adapter Settings

1. Press Windows Key + R then type ncpa.cpl and hit Enter.

2. Right-click on your Wifi Connection and select Properties.

3. From the Wi-Fi properties window, select Internet Protocol Version 4 and click Properties.

4. Now make sure to checkmark “Obtain an IP address automatically” and “Obtain DNS server address automatically”.

5. Click OK, then again click on OK and click Close.

6. Reboot your PC to save changes.

Method 3: Enable DHCP client service

1. Press Windows Key + R then type services.msc and hit Enter.

2. Find DHCP Client in this list then double-click on it to open its properties.

3. Make sure Startup type is set to Automatic and click Start if the service is not already running.

4. Click Apply, followed by OK.

5. Restart your PC to save changes and see if you’re able to Fix DHCP is not enabled for WiFi in Windows 10.

Method 4: Temporarily Disable Antivirus and Firewall

Sometimes the Antivirus program can cause an error and in order to verify this is not the case here, you need to disable your antivirus for a limited time so that you can check if the error still appears when the antivirus is off.

1. Right-click on the Antivirus Program icon from the system tray and select Disable.

2.  Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3. Once done, again try to connect to open Google Chrome and check if the error resolves or not.

4. Search for the control panel from the Start Menu search bar and click on it to open the Control Panel.

5. Next, click on System and Security then click on Windows Firewall.

6. Now from the left window pane click on Turn Windows Firewall on or off.

7. Select Turn off Windows Firewall and restart your PC.

Again try to open Google Chrome and visit the web page which was earlier showing an error. If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.

Method 5: Uncheck Proxy

1. Press Windows Key + R then type “inetcpl.cpl” and hit enter to open Internet Properties.

2. Next, Go to Connections tab and select LAN settings.

3. Uncheck Use a Proxy Server for your LAN and make sure “Automatically detect settings” is checked.

4. Click Ok then Apply and reboot your PC.

Method 6: Reset Winsock and TCP/IP

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Again, open Admin Command Prompt and type the following and hit enter after each one:

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset

3. Reboot to apply changes. Netsh Winsock Reset command seems to Fix DHCP is not enabled for WiFi in Windows 10.

Method 7: Reinstall your Network driver

1. Press Windows Key + R then type devmgmt.msc and hit Enter.

2. Expand Network adapters then right-click on your WiFi adapter and select Uninstall.

3. Again click Uninstall in order to confirm.

4. Now right-click on Network Adapters and select Scan for hardware changes.

5. Reboot your PC and Windows will automatically install the default drivers.

Method 8: Update Wireless Adapter drivers

1. Press Windows Key + R then type devmgmt.msc and hit Enter.

2. Right-click on the wireless adapter under Network Adapters and select Update Driver.

3. Select “Browse my computer for driver software.”

4. Again click on “Let me pick from a list of available drivers on my computer.”

5. Select the latest available driver from the list and click Next.

6. Reboot your PC to save changes and see if you’re able to Fix DHCP is not enabled for WiFi in Windows 10.

Method 9: Run CCleaner and Malwarebytes

1. Download and install CCleaner & Malwarebytes.

2. Run Malwarebytes and let it scan your system for harmful files. If malware is found it will automatically remove them.

3. Now run CCleaner and select Custom Clean.

4. Under Custom Clean, select the Windows tab then make sure to checkmark defaults and click Analyze.

5. Once Analyze is complete, make sure you’re certain to remove the files to be deleted.

6. Finally, click on the Run Cleaner button and let CCleaner run its course.

7. To further clean your system, select the Registry tab, and ensure the following are checked:

8. Click on the Scan for Issues button and allow CCleaner to scan, then click on the Fix Selected Issues button.

9. When CCleaner asks “Do you want backup changes to the registry?” select Yes.

10. Once your backup has completed, click on the Fix All Selected Issues button.

11. Restart your PC to save changes.

Recommended:

• Fix Steam Error Failed to load steamui.dll
• Change Template of a Drive, Folder, or Library in Windows 10
• Fix Could Not Connect to the Steam Network Error
• Fix Windows 10 Wrong Clock Time Issue

That’s it you have successfully Fix DHCP is not enabled for WiFi in Windows 10 but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.

Related posts

• Fix 5GHz WiFi在Windows 10中没有出现

• Fix WiFi不在Windows 10中工作[100％工作]

• Fix WiFi icon Windows 10灰色灰色

• Windows 10上的Fix Limited Access or No Connectivity WiFi

• Fix WiFi在Windows 10中没有自动连接

• Windows 10上的Fix Device不是Migrated Error

• Windows 10上的Fix Printer Spooler Errors

• Fix Microsoft Office在Windows 10上不打开

• 如何在Windows 10响应Fix Printer

• Windows 10中的Fix NVIDIA Control Panel Missing

• Fix Media Disconnected Error在Windows 10上

• Windows 10缺少Fix BOOTMGR如何缺少

• Fix No Internet Connection更新到Windows 10创建者更新后

• Windows 10中的Fix Black Desktop Background

• Windows 10缺少Fix Desktop Icon

• 修复在 Windows 10 中找不到 WiFi 网络

• 升级到Windows 10后未检测到Fix CD/DVD drive

• Fix Function键无效Windows 10

• Windows 10 Fix Unable至Install DirectX

• Windows 10上的Fix Generic PnP Monitor Problem