用户报告说，在更新到Windows 10 Creators Update后，他们无法访问互联网^(Internet)，因为它显示无线^(Wireless)甚至以太网^(Ethernet)上都无法访问互联网。简而言之，没有互联网^(Internet)连接，他们很无奈，因为没有互联网^(Internet)，他们就无法正常工作或使用他们的系统。即使在运行网络疑难解答后，问题似乎也没有解决，因为它找不到任何问题。

除上述外，部分用户还反映任务栏通知区没有网络图标，^(Taskbar)无法^{(Notification Area)}连接互联网^(Internet)。

更新到 Windows 10 创意者更新后没有 Internet 连接的原因是什么？^{(What is the cause of No Internet Connection after updating to Windows 10 Creators Update?)}

嗯，有很多因素可以导致没有WiFi问题。其中一些是损坏、过时或不兼容的无线^(Wireless)驱动程序、不正确的无线配置、硬件问题、网络帐户问题、损坏的配置文件等。这些是更新到^(Wireless)Windows 10 Creators Update后可能导致没有互联网连接问题的一些问题。

注意：^(Note:) 确保^(Make)您可以使用手机连接到同一网络。此外，请确保禁用飞行^(Airplane)模式，并使用物理开关启用无线。^(Wireless)

修复^{(Fix No Internet Connection)}更新到Windows 10 Creators Update后没有 Internet 连接

在继续之前，请创建一个系统还原点^{(create a system restore point)}并备份您的注册表^{(backup your registry)}，以防万一出现问题。

Method 1: Flush DNS and Reset TCP/IP

1.打开命令提示符^{(Command Prompt)}。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

2. 现在输入以下命令并在每个命令后按Enter ：

ipconfig /release
ipconfig /flushdns
ipconfig /renew

3.再次^(Again)，打开Admin Command Prompt并键入以下内容，然后在每个之后按回车：

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset

4. 重新启动以应用更改。更新到 Windows 10 Creators Update 后，刷新DNS似乎可以修复无 Internet 连接。^{(Fix No Internet Connection after updating to Windows 10 Creators Update.)}

方法 2：运行网络疑难解答^{(Method 2: Run Network Troubleshooter)}

1. 按Windows Key + I 打开设置^(Settings)，然后单击 更新和安全。^{( Update & Security.)}

2. 从左侧菜单中，选择 疑难解答。^{( Troubleshoot.)}

3. 在疑难解答下，单击 Internet 连接^{( Internet Connections)} ，然后单击 运行疑难解答。^{(Run the troubleshooter.)}

4. 按照屏幕上的进一步说明运行疑难解答。

5. 重新启动您的 PC 以保存更改。

方法 3：禁用然后启用您的网络连接^{(Method 3: Disable and then Enable your network connection)}

1. 按 Windows 键 + R，然后键入ncpa.cpl并按 Enter。

2. 右键单击​​您的无线适配器^{( wireless adapter)}并选择禁用。^(Disable.)

3. 再次右键单击同一个适配器，这次选择启用。^{(choose Enable.)}

4. 重新启动并再次尝试连接到您的无线网络，看看您是否能够在更新到 Windows 10创意^(F)者更新后修复无 Internet 连接。^{(ix No Internet Connection after updating to Windows 10 Creators Update.)}

方法4：忘记网络然后再次尝试连接^{(Method 4: Forget the Network then again try to connect)}

1. 单击系统托盘中的无线^(Wireless)图标，然后单击网络设置。^{(Network Settings.)}

2. 然后单击管理已知网络^{( Manage Known networks)}以获取已保存网络的列表。

3. 现在选择 Windows 10 不会记住密码的那个，然后单击忘记。^{(click Forget.)}

4.再次单击系统托盘中的无线图标^{( wireless icon)}并连接到您的网络，它会要求输入密码，因此请确保您有无线^(Wireless)密码。

5. 输入密码后，您将连接到网络，Windows将为您保存此网络。

6.重启你的电脑，再次尝试连接到同一个网络，这一次Windows会记住你的WiFi密码。更新到 Windows 10 Creators Update 后，^{(Fix No Internet Connection after updating to Windows 10 Creators Update.)}此方法似乎可以修复无 Internet 连接。

方法5：取消选中无线适配器的省电^{(Method 5: Uncheck Power Saving for Wireless Adapter)}

1. 按 Windows 键 + R 然后键入devmgmt.msc并按 Enter。

2. 展开网络适配器^{( Network adapters)}，然后右键单击已安装的网络适配器并选择属性。^{(Properties.)}

3.切换到电源管理选项卡^{(Power Management Tab)}并确保取消选中^(uncheck)“允许计算机关闭此设备以节省电源”。^{(Allow the computer to turn off this device to save power.)}”

4. 单击确定^(Ok)并关闭设备管理器。

5. 现在按Windows Key + I 打开设置，然后 Click System > Power & Sleep.

6. 在底部单击，附加电源设置。^{(click, Additional power settings.)}

7.现在单击您使用的电源计划旁边的“更改计划设置”。^{(Change plan settings)}

8. 在底部单击“更改高级电源设置”。^{(Change advanced power settings.)}”

9. 展开Wireless Adapter Settings，然后再次展开Power Saving Mode。

10. 接下来，您将看到两种模式，“使用电池”和“插入”。将它们都更改^(Change)为最高性能。^{(Maximum Performance.)}

11. 单击应用，然后单击确定。^(Ok.)

12. 重新启动您的 PC 以保存更改。这将有助于 在更新到 Windows 10 Creators Update 后修复无 Internet 连接，^{( No Internet Connection after updating to Windows 10 Creators Update,)} 但如果此方法无法完成工作，还有其他方法可以尝试。

方法 6：更新网络适配器驱动程序^{(Method 6: Update the Network Adapter Driver)}

1. 按 Windows 键 + R 然后键入devmgmt.msc并按 Enter。

2.展开网络^{(Expand Network)}适配器，然后右键单击已安装的网络适配器并选择更新驱动程序软件。^{(Update Driver Software.)}

3. 然后选择自动搜索更新的驱动程序软件。^{( Search automatically for updated driver software.)}

4. 重新启动您的 PC 以保存更改。如果问题仍然存在，请执行下一步。

5. 再次选择更新驱动程序软件^{(Update Driver Software)}，但这次选择“浏览我的计算机以查找驱动程序软件。^{(Browse my computer for driver software.)}'

6. 接下来，在底部单击“让我从计算机上的设备驱动程序列表中选择”。^{(‘Let me pick from a list of device drivers on the computer.’)}

7. 从列表中选择最新的驱动程序，然后单击下一步。^(Next.)

8.让Windows安装驱动程序，一旦完成关闭一切。

9. 重新启动您的 PC 以保存更改，更新到 Windows 10 Creators Update 后^{(Fix No Internet Connection after updating to Windows 10 Creators Update.)}您可能能够修复无 Internet 连接。

方法 7：卸载网络适配器驱动程序^{(Method 7: Uninstall Network Adapter Driver)}

1. 按 Windows 键 + R 然后输入devmgmt.msc 并按Enter打开设备管理器^{(Device Manager)}。

2. 展开网络适配器^{(Network Adaptor)}，然后右键单击无线网络适配器^{(Wireless Network Adaptor)}并选择卸载。^(Uninstall.)

3. 如果要求确认，请选择是^(Yes)。

4. 重新启动以保存更改，然后尝试重新连接您的无线^(Wireless)。

方法 8：暂时禁用防病毒和防火墙^{(Method 8: Temporarily Disable Antivirus and Firewall)}

有时防病毒^(Antivirus)程序可能会导致Windows 10 中无法连接到此网络问题。要^{(Can’t Connect to this network issue in Windows 10. To)} 验证此处不是这种情况，您需要在有限的时间内禁用防病毒软件，以便检查防病毒软件时错误是否仍然出现已关闭。

1. 右键单击​​系统托盘中的 防病毒程序图标^{( Antivirus Program icon)} 并选择 禁用。^(Disable.)

2. 接下来，选择 防病毒软件将保持禁用的时间范围。^{( Antivirus will remain disabled.)}

注意：选择尽可能短的时间，例如 15 分钟或 30 分钟。

3. 完成后，再次尝试连接以打开Google Chrome并检查错误是否解决。

4. 从开始菜单^{(Start Menu)}搜索栏搜索控制面板，点击打开 控制面板。^{( Control Panel.)}

5. 接下来，单击 系统和安全，^{( System and Security)} 然后单击 Windows 防火墙。^{(Windows Firewall.)}

6. 现在从左侧窗格中单击 打开或关闭 Windows 防火墙。^{( Turn Windows Firewall on or off.)}

7. 选择关闭 Windows 防火墙并重新启动您的 PC。^{(Select Turn off Windows Firewall and restart your PC.)}

再次尝试打开Google Chrome并访问之前显示^{(Google Chrome)}Can't Connect to this network issue in Windows 10的网页。 如果上述方法不起作用，请按照相同的步骤重新 打开您的防火墙。^{( turn on your Firewall again.)}

方法 9：运行 Windows 10 网络重置功能^{(Method 9: Run Windows 10 Network Reset feature)}

1. 按Windows Key + I 打开设置^(Settings)，然后单击网络和 Internet。^{(Network & Internet.)}

2.从左侧窗格中单击状态。^(Status.)

3.向下滚动到底部，然后单击网络重置。^{( Network reset.)}

4. 在下一个窗口中，单击立即重置。^{( Reset now.)}

5. 如果要求确认，请选择是^(Yes)。

6. 重新启动您的 PC 以保存更改。

受到推崇的：^{(Recommended:)}

• 在 Windows 10 的上下文菜单中将 PowerShell 替换为命令提示符^{(Replace PowerShell with Command Prompt in Context Menu in Windows 10)}
• 让谷歌浏览器更快的 12 种方法^{(12 Ways To Make Google Chrome Faster)}
• 修复 Windows 更新卡住或冻结^{(Fix Windows Update Stuck or Frozen)}
• 修复 Windows 10 Creators Update 安装卡住^{(Fix Windows 10 Creators Update installation stuck)}

就是这样，您在更新到 Windows 10^{(Fix No Internet Connection after updating to Windows 10)} Creators Update 后已成功修复无 Internet 连接，但如果您对本指南仍有任何疑问，请随时在评论部分询问他们

Fix No Internet Connection after updating to Windows 10 Creators Update

Userѕ are repоrting that after υpdating to Windows 10 Creators Update, they can’t access the Internet as it shows No internet access on Wireless or even on Ethernet. In short, there is nо Internet cоnnection, and they are helplеss as, withоut the Intеrnet, they can’t work or use their system prоperly. Even after running network troubleshooter, the problem doesn’t seem to resolve as it can’t find any problems.

In addition to above, some users are also reporting that there is no network icon in the Notification Area of the Taskbar and there is no way they could connect to the Internet.

What is the cause of No Internet Connection after updating to Windows 10 Creators Update?

Well, there are many factors which can cause no WiFi issue. Some of them are corrupted, outdated or incompatible Wireless drivers, incorrect Wireless configuration, hardware issues, network account issue, corrupt profile etc. These are some of the issues that can lead to no internet connection problem after updating to Windows 10 Creators Update.

Note: Make sure you can connect to the same network using your mobile. Also, make sure that Airplane mode is disabled, and Wireless is enabled using the physical switch.

Fix No Internet Connection after updating to Windows 10 Creators Update

Before continuing, create a system restore point and also backup your registry just in case something goes wrong.

Method 1: Flush DNS and Reset TCP/IP

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Now type the following command and press Enter after each one:

ipconfig /release
ipconfig /flushdns
ipconfig /renew

3. Again, open Admin Command Prompt and type the following and hit enter after each one:

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset

4. Reboot to apply changes. Flushing DNS seems to Fix No Internet Connection after updating to Windows 10 Creators Update.

Method 2: Run Network Troubleshooter

1. Press Windows Key + I to open Settings then click on Update & Security.

2. From the left-hand menu, select Troubleshoot.

3. Under Troubleshoot, click on Internet Connections and then click Run the troubleshooter.

4. Follow further on-screen instructions to run the troubleshooter.

5. Reboot your PC to save changes.

Method 3: Disable and then Enable your network connection

1. Press Windows Key + R then type ncpa.cpl and hit Enter.

2. Right-click on your wireless adapter and select Disable.

3. Again right-click on the same adapter and this time choose Enable.

4. Restart your and again try to connect to your wireless network and see if you’re able to Fix No Internet Connection after updating to Windows 10 Creators Update.

Method 4: Forget the Network then again try to connect

1. Click on the Wireless icon in the system tray and then click Network Settings.

2. Then click on Manage Known networks to get the list of saved networks.

3. Now select the one which Windows 10 won’t remember the password for and click Forget.

4.Again click the wireless icon in the system tray and connect to your network, it will ask for the password, so make sure you have the Wireless password.

5. Once you have entered the password, you will connect to the network, and Windows will save this network for you.

6. Reboot your PC and again try to connect to the same network, and this time Windows will remember the password of your WiFi. This method seems to Fix No Internet Connection after updating to Windows 10 Creators Update.

Method 5: Uncheck Power Saving for Wireless Adapter

1. Press Windows Key + R then type devmgmt.msc and hit Enter.

2. Expand Network adapters then right-click on your installed network adapter and select Properties.

3. Switch to Power Management Tab and make sure to uncheck “Allow the computer to turn off this device to save power.”

4. Click Ok and close the Device Manager.

5. Now press Windows Key + I to open Settings then Click System > Power & Sleep.

6. On the bottom click, Additional power settings.

7. Now click “Change plan settings” next to the power plan which you use.

8. At the bottom click on “Change advanced power settings.”

9. Expand Wireless Adapter Settings, then again expand Power Saving Mode.

10. Next, you will see two modes, ‘On battery’ and ‘Plugged in.’ Change both of them to Maximum Performance.

11. Click Apply, followed by Ok.

12. Reboot your PC to save changes. This would help fix No Internet Connection after updating to Windows 10 Creators Update, but there are other methods to try if this one fails to do its job.

Method 6: Update the Network Adapter Driver

1. Press Windows Key + R then type devmgmt.msc and hit Enter.

2. Expand Network adapters then right-click on your installed network adapter and select Update Driver Software.

3. Then choose Search automatically for updated driver software.

4. Reboot your PC to save changes. If the problem persists, then follow the next step.

5. Again select Update Driver Software but this time chooses ‘Browse my computer for driver software.‘

6. Next, at the bottom click ‘Let me pick from a list of device drivers on the computer.’

7. Select the latest driver from the list and click Next.

8. Let the Windows install drivers and once complete close everything.

9. Reboot your PC to save changes, and you may be able to Fix No Internet Connection after updating to Windows 10 Creators Update.

Method 7: Uninstall Network Adapter Driver

1. Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2. Expand Network Adaptor and then right-click on the Wireless Network Adaptor and select Uninstall.

3. If asked for confirmation, select Yes.

4. Reboot to save changes and then try to reconnect your Wireless.

Method 8: Temporarily Disable Antivirus and Firewall

Sometimes the Antivirus program can cause Can’t Connect to this network issue in Windows 10. To verify this is not the case here, you need to disable your antivirus for a limited time so that you can check if the error still appears when the antivirus is off.

1. Right-click on the Antivirus Program icon from the system tray and select Disable.

2.  Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible, for example, 15 minutes or 30 minutes.

3. Once done, again try to connect to open Google Chrome and check if the error resolves or not.

4. Search for the control panel from the Start Menu search bar and click on it to open the Control Panel.

5. Next, click on System and Security then click on Windows Firewall.

6. Now from the left window pane click on Turn Windows Firewall on or off.

7. Select Turn off Windows Firewall and restart your PC.

Again try to open Google Chrome and visit the web page earlier showing Can’t Connect to this network issue in Windows 10. If the above method doesn’t work, please follow the same steps to turn on your Firewall again.

Method 9: Run Windows 10 Network Reset feature

1. Press Windows Key + I to open Settings then click on Network & Internet.

2.From the left window pane click on Status.

3.Scroll down to the bottom and click on Network reset.

4. On the next window, click on Reset now.

5. If asks for confirmation, select Yes.

6. Reboot your PC to save changes.

Recommended:

• Replace PowerShell with Command Prompt in Context Menu in Windows 10
• 12 Ways To Make Google Chrome Faster
• Fix Windows Update Stuck or Frozen
• Fix Windows 10 Creators Update installation stuck

That’s it you have successfully Fix No Internet Connection after updating to Windows 10 Creators Update but if you still have any queries regarding this guide then feel free to ask them in the comment’s section

Related posts

• Windows 10上的Fix IPv6 Connectivity No Internet Access

• Windows 10 Internet Explorer中缺少Fix Favorites

• 修复 Internet 在 Windows 10 上不断下降的问题

• Windows 10中的Fix Black Desktop Background

• Fix Computer Wo在Windows 10中没有转到Sleep Mode

• Fix Option Windows 10缺少Bluetooth的Bluetooth或关闭

• Windows 10上的Fix Video Playback Freezes

• Windows 10缺少Fix BOOTMGR如何缺少

• Fix System图标未显示在Windows 10任务栏上

• Windows 10中Fix Unable至Delete Temporary Files

• Fix HDMI No Sound在Windows 10连接到电视时

• 如何在Windows 10中Fix Corrupted Registry

• Windows 10缺少Fix VCRUNTIME140.dll

• Windows 10缺少Fix Desktop Icon

• Fix Spotify未在Windows 10上开放

• Fix Wacom Tablet Driver Windows 10中Fix Wacom Tablet Driver号Found

• Windows 10中的Fix Task Host Window Prevents Shut Down

• Fix Microsoft Office在Windows 10上不打开

• Windows 10的Fix High CPU and Disk usage problem

• 如何在Windows 10上Fix High CPU Usage