Wi-Fi ( WLAN ) 卡是大多数笔记本电脑的标准配置。代替延长线^{(extension cord)}，您可以为您的单独 PC 获得一个USB Wi-Fi 加密狗^{(USB Wi-Fi dongle)}。如果机器已配置，则计算机可以搜索附近的Wi-Fi网络并连接到它们。许多客户抱怨说，当他们查看可用网络列表时，他们会看到未找到Wi-Fi网络的警告，即使他们应该看到至少一个网络。如果您尝试在Windows 10电脑上连接到Internet ，但找不到任何开放的 Wi-Fi^(Wi-Fi)网络，我们可以提供帮助。我们为您带来了一个完美的指南，它不会修复WiFi网络发现Windows 10问题。所以，继续阅读！

如何修复在 Windows 10 中找不到 WiFi 网络^{(How to Fix No WiFi Networks Found in Windows 10)}

WLAN^{(WLAN network)}网卡驱动程序通常会在Windows 10上导致此问题。下面列出了此问题的其他原因。

• 不兼容或过时的网络驱动程序。
• 飞行模式已开启。
• 防病毒推断。
• VPN 故障。
• 配置错误的 Wi-Fi 适配器设置。
• 不稳定的互联网连接。

基本故障排除提示^{(Basic Troubleshooting Tips)}

在通过高级方法修复Windows 10中找不到^{(Windows 10)}WiFi网络之前，请遵循这些基本故障排除提示。 

• 重启你的电脑。
• 在您的手机上创建一个热点并尝试连接到它。
• 使用您家中的其他设备（例如智能手机）连接到Wi-Fi 。无论您使用的是 Windows 10 还是其他操作系统^{(operating system)}，都没有区别。
• 尝试移动工作站或向网络添加更多接入点以增加路由器的信号。
• 如果需要，请重新启动路由器。
  • 按住电源按钮^{(power button)}几秒钟。
  • 在继续之前至少等待^(Allow)30 秒。
  • ^(Press)再次按下电源按钮^{(power button)}将其重新打开。
• 检查是否在Windows 10中打开了Wi-Fi。
• 检查您的笔记本电脑是否处于飞行模式^{(Airplane Mode)}。
  • 按 Windows 键。
  • 从下拉列表中选择设置选项。^{(Settings option)}
  • 转到网络和 Internet^{(Network & Internet)}并禁用飞行模式^{(Airplane Mode)}（如果已启用）。

注意：^(Note:)我们建议在继续之前在第二台设备上阅读这些说明。仅当您的主要 Windows 10 PC 失去 Internet 连接时，它才应该链接到Internet 。

方法 1：运行 Internet 连接疑难解答^{(Method 1: Run Internet Connections Troubleshooter)}

您也可以使用疑难解答来确定您的硬件是否出现故障。您可以按照修复在Windows 10上找不到^{(Windows 10)}WiFi网络的步骤运行疑难解答程序。

1. 同时按 Windows + I keys 启动 设置^(Settings)。

2. 单击 更新和安全^{(Update & Security)} 磁贴，如图所示。

3.从左侧窗格转到 疑难解答 菜单。^{(Troubleshoot )}

4. 选择 Internet 连接^{(Internet Connections)} 并单击 运行疑难解答^{(Run the troubleshooter)} 按钮，如下所示。

5. 选择 解决我的 Internet 连接问题^{(Troubleshoot my connection to the Internet)} 选项。

6.等待疑难解答 发现问题^{(detect problems)}。

7. 按照 屏幕上的说明^{(on-screen instructions)}进行故障排除。该过程完成后， 重新启动^(restart) 您的 PC^{(your PC)}。

方法 2：运行网络适配器疑难解答^{(Method 2: Run Network Adapter Troubleshooter)}

网络适​​配器疑难解答^{(network adapter troubleshooter)}，类似于Internet 连接疑难解答^{(Internet Connections troubleshooter)}，也可以提供帮助。因此，请按照以下步骤修复在Windows 10中找不到^{(Windows 10)}WiFi网络。

1. 打开设置^(Settings)并选择 更新和安全^{(Update & security)}。

2. 从左侧窗格转到疑难解答 ^{(Troubleshoot )}菜单，然后在右侧窗格中找到 查找并修复其他问题^{(Find and fix other problems)} 。

3. 选择网络适配器^{(Network Adapter)} 疑难解答并单击突出显示的 运行疑难解答^{(Run the troubleshooter)} 按钮。

4. 选择所有网络适配器^{(All network adapters )}，然后单击下一步^{( Next)}。

5. 如果出现问题，请单击应用此修复程序^{(Apply this fix )}并按照后续提示中给出的说明进行操作。

另请阅读：^{(Also Read:)} 如何在Windows 10上^{(Windows 10)}设置网络文件^{(Setup Network Files)}共享

方法 3：更新驱动程序^{(Method 3: Update Drivers)}

如果您在安装Windows 10后就开始出现找不到Wi-Fi网络的问题，那么您当前的驱动程序很可能与Windows 10不兼容。由于网络驱动程序^{(network driver)}过时，您的笔记本电脑也可能无法看到可访问的网络。按照以下步骤安装^(Install)任何可用的网络适配器驱动程序更新。^{(network adapter driver)}

1. 按Windows 键^{(Windows key)}，输入设备管理器^{(Device Manager)}并单击打开^(Open)。

2. 双击 网络适配器。^{(Network adapters. )}

3. 右键单击​​您的 Wi-Fi 设备。单击^(Click)更新驱动^{(Update driver)}程序。

4. 选择自动搜索驱动程序^{(Search automatically for drivers)}。

5A。如果发现新的驱动程序^(driver)，系统将自动安装它。

5B。如果驱动程序是最新的，那么它将显示The best drivers for your device are already installed。

6. 选择在 Windows Update 上搜索更新的驱动程序^{(Search for updated drivers on Windows Update)}以手动检查更新。

7.在Windows 更新屏幕中选择^{(Windows Update screen)}查看可选更新^{(View optional updates)}。

8. 通过选中驱动程序^(drivers)旁边的框来选择要安装的驱动程序，然后单击下载^(Download)并安装^(Install)按钮。

方法 4：回滚 Wi-Fi 适配器驱动程序^{(Method 4: Roll Back Wi-Fi Adapter Drivers)}

如果在最近的Windows 更新之后开始出现未找到^{(Windows update)}Wi-Fi网络的问题，或者如果您的旧驱动程序在您更新它们之前处于良好的工作状态，那么在这种情况下您将不得不恢复到旧版本的驱动程序。要回滚您的Wi-Fi驱动程序，请执行以下步骤：

1.从 Windows 搜索菜单中打开设备管理器。^{(Device Manager)}

2. 在设备管理器^{(Device Manager)}中双击展开标题为网络适配器^{(Network adapters)}的区域。

3. 右键单击​​您的WLAN 卡设备^{(WLAN card device)}并选择属性^(Properties)。

4. 转到驱动程序^(Driver)选项卡并选择回滚^(Rollback) 驱动程序^(Driver)。

注意：^{(Note: )}如果回滚驱动^{(Rollback driver)}选项是灰色的，你可以跳过这个方法。如果先前版本的驱动程序不可用，该选项将显示为灰色。

5. 允许回滚^(rollback)发生。重新启动^(Restart) 您的电脑^{(your PC)}。

另请阅读：^{(Also Read:)} 修复以太网没有有效的 IP 配置错误^{(Valid IP Configuration Error)}

方法 5：重新安装当前的 Wi-Fi 适配器^{(Method 5: Reinstall Current Wi-Fi Adapters)}

如果回退Wi-Fi 驱动程序^{(Wi-Fi driver)}不起作用，请尝试重新安装它，看看是否解决了Windows 10找不到^{(Windows 10)}Wi-Fi网络的问题。此方法将用适当的驱动程序替换任何有缺陷或损坏的驱动程序。

1.从 Windows 搜索菜单启动设备管理器。^{(Device Manager)}

2. 在设备管理器^{(Device Manager)}中双击展开标题为网络适配器^{(Network adapters)}的区域。

3. 右键单击​​您的WLAN 卡设备^{(WLAN card device)}并选择卸载设备^{(Uninstall device)}。

4. 选中删除此设备的驱动程序软件^{(Delete the driver software for this device)}复选框，然后单击卸载^(Uninstall)。

5.卸载驱动后重启电脑。^{(Restart the PC)}

6. 访问制造商的网站 ^{(manufacturer’s website )}（例如 英特尔^(Intel)）手动下载驱动程序。

方法 6：更改适配器设置^{(Method 6: Change Adapter Settings)}

否则，您的计算机将无法连接到您的网络，因为您的 Wi-Fi 适配器上的区域设置与您的 Wi-Fi 路由器上的区域设置不匹配。要更改区域，请执行以下操作：

1.从 Windows 搜索菜单转到 设备管理器。^{(Device Manager)}

2. 在设备管理器^{(Device Manager)}中双击展开标题为网络适配器^{(Network adapters)}的区域。

3. 右键单击​​您的WLAN 卡设备^{(WLAN card device)}并选择属性^(Properties)。

4.在属性^{(Property )}框中选择2.4 GHz 的通道宽度。^{(Channel Width for 2.4 GHz)}

5. 将值^(Value)设置为Auto。

注意 1：^{(Note 1:)}某些 Wi-Fi 路由器可能无法处理 5 GHz，因此请尝试其他组合。

注意 2：^{(Note 2:)}此功能并非在所有 Wi-Fi 适配器上都可用。对于某些人来说，它位于Channels Number属性或类似的东西中。

6. 单击确定^(OK)。

另请阅读：^{(Also Read:)} 修复 Windows^{(Fix Windows)}无法自动检测此网络的代理^(Proxy)设置

方法 7：重置网络适配器^{(Method 7: Reset Network Adapter)}

您的网络适配器^{(network adapter)}可能遇到系统重启无法解决的问题。在这种情况下，重置它是一个很好的选择。一些人声称，在他们的 Windows 10 笔记本电脑上重置Wi-Fi 网络适配器^{(network adapter)}帮助他们解决了各种Wi-Fi问题，例如找不到Wi-Fi 网络^{(Wi-Fi network)}。

1. 按Windows + I keys 启动 Windows设置^{( Settings)}。

2. 导航到设置菜单的网络和 Internet^{(Network and Internet)}部分。

3. 单击底部的网络重置选项。^{(Network Reset)}

4. 最后，如图所示单击“立即重置”确认提示。^{(Reset now )}

方法 8：启用隐藏 SSID^{(Method 8: Enable Hidden SSID)}

可以想象，您希望加入的网络有一个隐藏的SSID 或名称^{(SSID or name)}。您必须首先联系您的系统管理员^{(system administrator)}以获取连接到它的名称和密码。^{(name and password)}一旦你知道两者，你就可以连接到它。

1. 导航到 Windows 设置^( Settings)。

2. 导航到网络和 Internet^{(Network and Internet )}设置。

3. 导航到Wi-Fi选项卡。选择管理已知网络^{(Manage known networks)}。

4. 选择添加新网络^{(Add a new Network)}。

5.在出现的弹出框中输入网络名称^{(network name)}、安全类型^{(security type,)}和密码。^(password)单击保存^(Save)。

另请阅读：^{(Also Read:)} 修复^{(Fix Computers)}Windows 10中未在^{(Windows 10)}网络^(Network)上显示的计算机

方法 9：禁用故障 VPN^{(Method 9: Disable Faulty VPN)}

如果使用不当，VPN，无论是您在Windows上手动设置的VPN 连接^{(VPN connection)}，还是自动配置网络设置的商业VPN 服务^{(VPN service)}，都会影响您的 Wi-Fi 连接。

• 关闭您正在使用的所有VPN 服务，重新启动^{(VPN services)}计算机^(computer)，然后查找网络^(networks)。
• 出现后连接到其中一个网络^(networks)，然后重新启用VPN服务。
• 如果启用VPN^(VPN)后您的连接消失或停止工作，请检查您的ISP或您所在的国家^(country)/地区是否阻止了您正在使用的服务。
• 尝试不同的VPN服务或限制您的浏览器或单个程序而不是整个系统网络活动^{(system network activity)}的 VPN 服务。排查完毕后，查看Windows 10无Wi-Fi网络的问题是否依然存在。

方法 10：运行恶意软件扫描^{(Method 10: Run Malware Scan)}

一些恶意软件代理非常聪明，可以渗透到您的计算机并阻止^{(computer and block)}您连接到Internet。要发现和删除任何错误，最好的行动计划^{(action plan)}是执行全面的系统扫描。请按照以下步骤操作。

1. 同时按住Windows + I keys 打开Windows 设置^{(Windows Settings)}。

2. 现在，选择更新和安全^{(Update & Security )}链接，如图所示。

3. 然后，导航到左侧窗格中的Windows 安全性。^{(Windows Security )}

4. 现在，单击保护区域^{(Protection areas )}下的病毒和威胁保护^{(Virus & threat protection )}，如图所示。

5. 然后，单击扫描选项^{(Scan Options)}，如图所示。

6. 您可以根据需要选择快速扫描、全盘扫描、自定义扫描^{(Quick scan, Full scan, Custom scan, )}或Microsoft Defender 离线扫描^{(Microsoft Defender Offline scan)}，然后单击突出显示的立即扫描。^{(Scan Now )}

7A。如果有任何威胁，请单击当前威胁^{(Current threats)}下的开始操作^{(Start Actions )}。

7B。如果您的计算机没有任何威胁，将弹出无当前威胁提示，如下所示。^{(No current threats )}

^{(Method 11: Disable Antivirus )}方法 11：暂时^{(Temporarily )}禁用杀毒软件（不推荐）^{((Not Recommended))}

为了保护您免受攻击，如果防火墙有严格的规定，它可能不允许任何Internet 连接。^{(Internet connection)}这也可能是您的Windows 10 PC 无法检测到任何 Wi-Fi 网络的原因。暂时，这是关闭它以修复在Windows 10中找不到^{(Windows 10)}WiFi网络的方法。

注意：^(Note:)此处以Avast Antivirus为例。步骤和过程可能因防病毒软件^{(antivirus software)}而异。

1. 导航到任务栏中的防^(Taskbar)病毒图标^{(Antivirus icon)}并右键单击^{(right-click )}它。

2. 现在，选择Avast shields 控制^{(Avast shields control )}选项。

3. 根据您的方便选择选项并确认屏幕上显示的提示。

• 禁用 10 分钟^{(Disable for 10 minutes)}
• 禁用 1 小时^{(Disable for 1 hour)}
• 禁用直到计算机重新启动^{(Disable until computer is restarted)}
• 永久禁用^{(Disable permanently)}

注意：^(Note:)现在，返回主窗口。在这里，您已经关闭了Avast的所有屏蔽。要激活设置，请单击TURN ON。

另请阅读：^{(Also Read: )}修复^(Fix)Windows 10 Netwtw04.sys 蓝屏错误^{(Netwtw04.sys Blue Screen Error)}

方法12：修改服务配置^{(Method 12: Modify Services Configuration)}

确保正确配置服务设置以解决在Windows 10上找不到^{(Windows 10)}WiFi网络的问题。请按照以下步骤操作。

1. 同时按Windows + R keys启动运行^{(Run )}对话框。

2.输入services.msc并按Enter 键^{(Enter key)}。

3. 向下滚动并双击网络位置感知^{(Network Location Awareness)}。

4. 将启动类型^{(Startup type)}设置为自动^(Automatic)。单击应用^(Apply)，然后单击确定^(OK)。

5. 同样，设置以下服务的启动类型。

• 网络列表服务-手册^{(Network List Service-Manual)}
• Windows 事件日志-自动^{(Windows Event Log-Automatic)}
• Windows 更新手册^{(Windows Update-Manual)}
• WLAN AutoConfig-自动^{(WLAN AutoConfig-Automatic)}
• 无线电管理服务-手册^{(Radio Management Service-Manual)}

5. 对以上所有服务进行更改后，关闭服务窗口^{(Services window)}。

方法 13：打开网络发现^{(Method 13: Turn On Network Discovery)}

有时，网络发现^{(Network Discovery)}选项会关闭，从而导致此问题。通过执行以下步骤来修复在Windows 10中找不到^{(Windows 10)}WiFi网络，打开^(Turn)网络^{(Network Discovery)}发现。

1. 按Windows 键^{(Windows key)}。键入控制面板^{(Control Panel)}并打开它。

2.将查看方式^{(View by)}设置为类别^(Category)。选择网络和互联网^{(Network and Internet)}。

3. 选择网络和共享中心^{(Network and Sharing Center)}。

4. 单击更改高级共享设置^{(Change advanced sharing settings)}。

5. 选中选项打开网络发现^{(Turn on network discovery)}并单击保存更改^{(Save Changes)}。

注意：^(Note:)要进行此更改，您应该具有管理员权限。

方法 14：联系网络管理员^{(Method 14: Contact Network Administrator)}

可以控制系统的网络访问。^{(network access)}这是通过在路由器中阻止其MAC 地址来实现的。^{(MAC address)}也可以想象，只有特定的MAC 地址才能^{(MAC address)}加入^{(es join)}网络。商业网络^{(business network)}通常是这种情况，例如在工作中使用的网络。请联系网络管理员^{(Contact the network administrator)}并请求将您的系统添加到允许的系统列表中。如果您在连接到家庭网络^{(home network)}时遇到问题，请使用LAN 电缆^{(LAN cable)}连接到路由器并手动输入您的系统MAC 地址^{(MAC address)}。根据您拥有的路由器，程序会有所不同。

推荐的：^{(Recommended:)}

• 如何在Windows 10上重置^{(Windows 10)}网络设置^{(Network Settings)}
• 如何在Windows 10上禁用^{(Windows 10)}VPN 和代理^{(VPN and Proxy)}
• 如何解决Windows 10上的网络连接问题^{(Troubleshoot Network Connectivity Problems)}
• 如何将Chrome更改为默认浏览器^{(Default Browser)}

我们希望您发现此信息对您有所帮助^{(information helpful)}，并且您可以解决如何修复在 Windows 10 中找不到 Wi-Fi 网络的问题^{(no Wi-Fi networks found in Windows 10)}。请^(Please)告诉我们哪种方法最适合您。如果您有任何问题或意见，请将它们留在下面的评论部分^{(comment section)}。让我们知道您接下来想了解什么。

Fix No WiFi Networks Found in Windows 10

A Wi-Fi (WLAN) card is standard on most laptops. Instead of an extension cord, you may obtаin a USΒ Wi-Fi dongle for your solitary PC. If the machine is configured, then the computer can search for nearby Wi-Fi networks and cоnnect to them. Many customers have complained that when they view the list of available networks, they see the warning that no Wi-Fi networks found, even though they should see at least one network. If yоu’re trying to connect to the Internеt on your Windows 10 PC but can’t find any open Wi-Fi networks, we can help. We bring to you a perfect guide that will fix no WiFi nеtworks found Windows 10 issue. So, continue reading!

How to Fix No WiFi Networks Found in Windows 10

The WLAN network card drivers usually cause this problem on Windows 10. Other reasons for this issue are listed below.

• Incompatible or outdated network drivers.
• The airplane mode is turned on.
• Antivirus inference.
• Faulty VPN.
• Misconfigured Wi-Fi adapter settings.
• Unstable Internet connection.

Basic Troubleshooting Tips

Before going through the advanced methods to fix no WiFi networks found in Windows 10, follow these basic troubleshooting tips. 

• Restart your computer.
• Create a hotspot on your phone and try to connect to it.
• Connect to Wi-Fi with another device in your house, such as a smartphone. It makes no difference whether you use Windows 10 or another operating system.
• Try moving your workstation or adding more access points to your network to increase the router’s signal.
• If required, restart your router.
  • For a few seconds, press and hold the power button.
  • Allow at least 30 seconds to elapse before proceeding.
  • Press the power button once more to turn it back on.
• Check that Wi-Fi is turned on in Windows 10.
• Check to see whether your laptop is in Airplane Mode.
  • Press the Windows key.
  • Select the Settings option from the drop-down list.
  • Go to Network & Internet and disable Airplane Mode if it is enabled.

Note: We recommend reading these instructions on a second device before continuing. It should be linked to the Internet only if your primary Windows 10 PC loses internet connectivity.

Method 1: Run Internet Connections Troubleshooter

You may also use the troubleshooter to determine if your hardware is malfunctioning. You can run the troubleshooter by following the steps to fix no WiFi networks found on Windows 10.

1. Press Windows + I keys simultaneously to launch Settings.

2. Click on the Update & Security tile, as shown.

3. Go to Troubleshoot menu from the left pane.

4. Select Internet Connections and click on the Run the troubleshooter button as highlighted below.

5. Choose the Troubleshoot my connection to the Internet option.

6. Wait for the troubleshooter to detect problems.

7. Follow on-screen instructions to troubleshoot. Once the process is complete, restart your PC.

Method 2: Run Network Adapter Troubleshooter

The network adapter troubleshooter, similar to the Internet Connections troubleshooter, may also be of assistance. So, follow these steps to fix no WiFi networks found in Windows 10.

1. Open Settings and select Update & security.

2. Go to Troubleshoot menu from the left pane and locate Find and fix other problems in right pane.

3. Select Network Adapter troubleshooter and click on Run the troubleshooter button shown highlighted.

4. Select All network adapters and click Next.

5. If there is an issue, click on Apply this fix and follow the instructions given in the successive prompts.

Also Read: How to Setup Network Files Sharing on Windows 10

Method 3: Update Drivers

If your problem of no Wi-Fi networks found began as soon as you installed Windows 10, your present drivers are most likely incompatible with Windows 10. Your laptop may also be unable to see accessible networks due to an outdated network driver. Install any available network adapter driver updates by following the below steps.

1. Press Windows key, type Device Manager and click on Open.

2. Double-click on the Network adapters.

3. Right-click on your Wi-Fi device. Click on Update driver.

4. Select Search automatically for drivers.

5A. If a new driver is discovered, the system will install it automatically.

5B. If the driver is update-to-date, then it will display The best drivers for your device are already installed.

6. Select Search for updated drivers on Windows Update to check for updates manually.

7. Select View optional updates in the Windows Update screen.

8. Select the drivers you want to install by checking the boxes next to them, then clicking the Download and Install button.

Method 4: Roll Back Wi-Fi Adapter Drivers

If the issue of no Wi-Fi networks found began after a recent Windows update, or if your old drivers were in good working order before you updated them, you’ll have to revert to an older version of the driver in that instance. To roll back your Wi-Fi driver, follow these steps:

1. Open Device Manager from the Windows search menu.

2. Expand the area titled Network adapters by double-clicking it in Device Manager.

3. Right-click your WLAN card device and select Properties.

4. Go to the Driver tab and select Rollback Driver.

Note: If the Rollback driver option is greyed out, you can skip this method. The option is greyed if the previous version of the driver is not available.

5. Allow the rollback to occur. Restart your PC.

Also Read: Fix Ethernet Doesn’t Have a Valid IP Configuration Error

Method 5: Reinstall Current Wi-Fi Adapters

If rolling back the Wi-Fi driver doesn’t work, try reinstalling it to see if it solves the problem of no Wi-Fi networks found Windows 10. This method will replace any defective or corrupt drivers with the appropriate ones.

1. Launch Device Manager from the Windows search menu.

2. Expand the area titled Network adapters by double-clicking in Device Manager.

3. Right-click your WLAN card device and select Uninstall device.

4. Check the box Delete the driver software for this device and click Uninstall.

5. Restart the PC after uninstalling the driver.

6. Visit the manufacturer’s website ( e.g. Intel) to download the driver manually.

Method 6: Change Adapter Settings

Otherwise, your computer will be unable to connect to your network because the region settings on your Wi-Fi adapter do not match those on your Wi-Fi router. To change the region, do the following:

1. Go to Device Manager from Windows search menu.

2. Expand the area titled Network adapters by double-clicking it in Device Manager.

3. Right-click your WLAN card device and select Properties.

4. Select Channel Width for 2.4 GHz in the Property box.

5. Set the Value as Auto.

Note 1: Some Wi-Fi routers may not handle 5 GHz, so try an alternative combination.

Note 2: This feature isn’t available on all Wi-Fi adapters. For some, it’s in the Channels Number attribute or something similar.

6. Click OK.

Also Read: Fix Windows could not automatically detect this Network’s Proxy settings

Method 7: Reset Network Adapter

It’s possible that your network adapter is suffering issues that a system restart won’t cure. Resetting it is an excellent option in this scenario. Several people claim that resetting the Wi-Fi network adapter on their Windows 10 laptops helped them solve various Wi-Fi issues like no Wi-Fi networks found.

1. Press Windows + I keys to launch Windows Settings.

2. Navigate to the Network and Internet section of the settings menu.

3. Click the Network Reset option at the bottom.

4. Finally, confirm the prompt by clicking on Reset now as shown.

Method 8: Enable Hidden SSID

It’s conceivable that the network you wish to join has a concealed SSID or name. You must first contact your system administrator to obtain the name and password to connect to it. Once you know both, you can connect to it.

1. Navigate to the Windows Settings.

2. Navigate to the Network and Internet settings.

3. Navigate to the Wi-Fi tab. Select Manage known networks.

4. Select Add a new Network.

5. Enter the network name, security type, and password in the pop-up box that appears. Click Save.

Also Read: Fix Computers Not Showing Up on Network in Windows 10

Method 9: Disable Faulty VPN

If not used properly, a VPN, whether it’s a VPN connection you manually set up on Windows or a commercial VPN service that auto-configures network settings, can influence your Wi-Fi connection.

• Turn off any VPN services you’re using, restart your computer, and look for networks.
• Connect to one of the networks after they appear, and then re-enable the VPN service.
• If your connection vanishes or stops working after you enable the VPN, check to see if your ISP or your country blocks the service you’re using.
• Try a different VPN service or one that restricts your browser or a single program rather than the complete system network activity. After the troubleshooter has finished, see if the problem of no Wi-Fi networks Windows 10 still exists.

Method 10: Run Malware Scan

Some malware agents are clever enough to infiltrate your computer and block you from connecting to the Internet. To discover and delete any bugs, the best action plan is to perform a comprehensive system scan. Follow the below steps.

1. Press and hold the Windows + I keys together to open Windows Settings.

2. Now, select the Update & Security link, as shown.

3. Then, navigate to Windows Security in the left pane.

4. Now, click on Virus & threat protection under Protection areas as depicted.

5. Then, click on Scan Options, as shown.

6. You can choose Quick scan, Full scan, Custom scan, or Microsoft Defender Offline scan according to your need and click on Scan Now as highlighted.

7A. If there are any threats, click on Start Actions under Current threats.

7B. If your computer does not have any threats, the No current threats prompt will pop up as highlighted below.

Method 11: Disable Antivirus Temporarily (Not Recommended)

To protect you from incoming assaults, your firewall may not allow any Internet connection if it has severe regulations. It’s also possible that this is why your Windows 10 PC cannot detect any Wi-Fi networks. For the time being, here’s how to turn it off to fix no WiFi networks found in Windows 10.

Note: Here Avast Antivirus is shown as example. The steps and procedure may vary depending on the antivirus software.

1. Navigate to the Antivirus icon in the Taskbar and right-click on it.

2. Now, select the Avast shields control option.

3. Choose the option according to your convenience and confirm the prompt displayed on the screen.

• Disable for 10 minutes
• Disable for 1 hour
• Disable until computer is restarted
• Disable permanently

Note: Now, go back to the main window. Here, you have turned off all the shields from Avast. To activate the settings, click on TURN ON.

Also Read: Fix Windows 10 Netwtw04.sys Blue Screen Error

Method 12: Modify Services Configuration

Ensure that the services settings are appropriately configured to resolve no WiFi networks found on Windows 10 issue. Follow the below steps.

1. Press Windows + R keys simultaneously to launch the Run dialog box.

2. Type services.msc and press Enter key.

3. Scroll down and double-click Network Location Awareness.

4. Set the Startup type to Automatic. Click Apply and then OK.

5. Similarly, set the startup types for the following services.

• Network List Service-Manual
• Windows Event Log-Automatic
• Windows Update-Manual
• WLAN AutoConfig-Automatic
• Radio Management Service-Manual

5. After changing for all the above services, close the Services window.

Method 13: Turn On Network Discovery

Sometimes, Network Discovery options would have turned off, leading to this issue. Turn on Network Discovery by implementing the below steps to fix no WiFi networks found in Windows 10.

1. Hit the Windows key. Type Control Panel and open it.

2. Set the View by as Category. Select Network and Internet.

3. Select Network and Sharing Center.

4. Click Change advanced sharing settings.

5. Check the option Turn on network discovery and click Save Changes.

Note: To make this change, you should have admin rights.

Method 14: Contact Network Administrator

The network access of a system can be controlled. This is accomplished by blocking its MAC address in the router. It’s also conceivable that only specific MAC addresses join a network. This is most often the case with a business network, such as the one used at work. Contact the network administrator and request that your system be added to the allowed systems list. If you’re experiencing problems connecting to a home network, use a LAN cable to connect to the router and manually input your system MAC address. Depending on the router you have, the procedure will be different.

Recommended:

• How to Reset Network Settings on Windows 10
• How to Disable VPN and Proxy on Windows 10
• How to Troubleshoot Network Connectivity Problems on Windows 10
• How to Change Chrome as Default Browser

We hope you found this information helpful and that you could resolve how to fix no Wi-Fi networks found in Windows 10. Please tell us which method worked best for you. If you have any questions or comments, please leave them in the comment section below. Let us know what you want to learn about next.

Related posts

• Fix 5GHz WiFi在Windows 10中没有出现

• Fix Wacom Tablet Driver Windows 10中Fix Wacom Tablet Driver号Found

• Fix WiFi不在Windows 10中工作[100％工作]

• Fix WiFi icon Windows 10灰色灰色

• Windows 10中的WiFi未启用Fix DHCP

• Windows 10上的Fix Limited Access or No Connectivity WiFi

• Windows 10缺少Fix VCRUNTIME140.dll

• Windows 10缺少Fix BOOTMGR如何缺少

• Windows 10上的Fix Generic PnP Monitor Problem

• Fix WiFi在Windows 10中没有自动连接

• Windows 10中Fix Class不是Registered error

• WiFi在Windows 10中断断开连接[已解决]

• Fix Calculator不在Windows 10工作

• Fix Rotation Lock在Windows 10中灰色

• Fix Integrated Webcam无效Windows 10

• Fix Microsoft Office在Windows 10上不打开

• Fix Desktop Icons Windows 10创建者更新后继续重新排列

• Fix System图标未显示在Windows 10任务栏上

• Fix No Internet Connection更新到Windows 10创建者更新后

• Fix Function键无效Windows 10