Windows预装了故障排除功能，可让您检测和修复Windows系统上的连接问题和其他技术问题。每当(Whenever)您使用疑难解答程序扫描错误时，它都会自动检测并解决它们。通常，疑难解答程序会检测到问题，但不会推荐任何解决方案。在这种情况下，您会在 Wi-Fi 图标旁边看到一个黄色警告标志。现在，当您运行网络疑难解答时，您可能会遇到一条错误消息，指出Windows无法自动检测此网络的代理设置。
幸运的是，您可以使用多种方法来修复系统上的此网络错误。通过本指南，我们解释了导致此错误的各种原因以及如何 修复无法自动检测到此网络的代理设置问题的 Windows。(fix Windows that could not automatically detect this network’s proxy settings issue.)
修复 Windows(Fix Windows)无法自动检测此网络的代理(Proxy)设置
Windows 无法自动检测此网络的代理设置错误的原因(Reasons for Windows could not automatically detect this network’s proxy settings error)
发生此错误的常见原因是操作系统的代理设置发生了变化。这些设置可能会因以下原因而改变
- 您计算机上的病毒/恶意软件或
- Windows操作系统文件 的更改。
下面给出了一些简单的方法来修复Windows系统上的代理设置错误。
确保 创建一个还原点(create a restore point) 以防万一出现问题。
方法一：重启网卡 (Method 1: Restart the Network Adapter )
重新启动网络适配器(Adapter)可以帮助您解决Windows计算机上令人讨厌的连接问题。请按照给定的步骤执行此操作：
1. 按键盘上的Windows + I keys启动Windows 设置(Windows settings)。
2. 点击Network and Internet，如图所示。
3. 在状态(Status)选项卡下，单击更改适配器选项(Change adapter options)，如图所示。
4. 现在，选择 Wi-Fi 网络或以太网进行LAN连接。单击工具栏中(toolbar)的禁用此网络设备(Disable this network device)。
5. 等待大约 10-15 秒。
6. 最后，再次选择您的网络连接，然后像以前一样 从工具栏中(toolbar)单击启用此网络设备。(Enable this network device)
方法 2：更改适配器 IP 设置 (Method 2: Change Adapter IP settings )
如果您无法访问Internet，那么您可以尝试禁用系统上的手动 IP 地址或DNS配置。许多用户能够 通过启用Windows自动获取 IP 地址和DNS服务器地址来修复无法自动检测此网络的代理设置(fix Windows that could not automatically detect this network’s proxy settings) 错误的Windows。按照给定的步骤进行操作：
1. 启动 Windows设置(Settings)并转到网络和 Internet(Network and Internet)部分，就像您在以前的方法中所做的那样。
2. 选择状态(Status)选项卡下的更改适配器选项(Change adapter options)，如图所示。
3. 选择您的互联网网络（Wi-Fi或以太网(Ethernet)）并右键单击以选择属性(Properties)，如下图所示。
4.从给定列表中找到Internet Protocol Version 4 (TCP/IPv4)单击屏幕截图中描述的 属性。(Properties)
5. 在常规(General)选项卡下，启用标题为自动获取 IP 地址(Obtain an IP address automatically)和自动获取 DNS 服务器地址(Obtain DNS server address automatically)的选项。
6. 最后，点击OK保存更改，如图所示。
另请阅读：(Also Read:) 修复 Windows 无法自动检测此网络的代理设置(Fix Windows could not automatically detect this network’s proxy settings)
方法 3：重置网络设置(Method 3: Reset Network Settings)
如果您仍然无法访问您的Internet连接，请尝试重置您的网络设置。当您重置网络设置时，它会重置VPN和代理服务器。它还将网络配置回滚到其默认状态。按照给定的步骤重置您的网络设置，以修复无法自动检测此网络的代理设置的Windows 。
注意：(Note:) 确保在继续进行(Make)网络(Network)重置 之前关闭所有后台运行的程序或应用程序。
1. 启动 Windows设置(Settings)并单击网络和 Internet(Network and Internet)，如前所述。
2. 向下滚动并单击Network reset，如图所示。
3.在弹出的确认窗口中单击“是” 。(YES)
4. 最后，您的系统将自动重置(automatically reset)网络设置并重新启动(restart)您的计算机。
Windows无法自动检测此网络的代理设置错误现在应该更正。如果没有，请尝试后续方法。
方法 4：禁用代理服务器 (Method 4: Disable Proxy Server )
禁用代理服务器选项能够为许多Windows用户解决此问题。以下是如何在Windows系统上禁用代理服务器选项：
1. 通过同时按下键盘上的Windows + R keys启动运行。
2.屏幕上出现运行对话框(Run dialog box)后，输入inetcpl.cpl并按Enter 键(Enter)。参考下图。
3. Internet 属性(The Internet Properties)窗口将出现在您的屏幕上。切换到连接(Connections)选项卡。
4. 如图所示，单击LAN 设置(LAN settings)。
5. 现在，确保取消选中标题为为 LAN 使用代理服务器的选项旁边的框(Use a proxy server for your LAN) （这些设置不适用于拨号或 VPN 连接）((These settings will not apply to dial-up or VPN connections))。
6. 最后，点击OK保存这些更改，如图所示。
现在，检查您是否能够访问您的Internet连接。如果不是，则系统上安装的网络驱动(Network Drivers)程序可能存在问题。我们将通过以下方法解决这些问题。
方法 5：更新网络驱动程序(Method 5: Update Network Drivers)
如果您遇到Internet连接问题并且无法运行网络疑难解答程序，那么您的系统上可能使用了过时的网络驱动程序。如果网络驱动程序损坏或过时，您肯定会在系统上遇到连接问题。
要更新网络驱动程序，请执行以下步骤：
1. 转到Windows 搜索(Windows search)栏并键入设备管理器(Device Manager)。从搜索结果中启动它。
2.通过双击 找到并展开网络适配器。(Network adapters)
3. 您将看到计算机上安装的网络驱动程序列表。右键单击您的网络驱动程序(Network driver)，然后从给定菜单中单击更新驱动程序。(Update driver)参考下图。
4. 屏幕上会出现一个新窗口。在这里，选择自动搜索驱动程序(Search automatically for drivers)。
Windows 会自动将您的网络驱动程序更新到最新版本。
注意：(Note:)如果您不记得您的网络驱动程序，您可以导航到Settings > Network and Internet > Status > Change adapter options。您将能够在 Wi-Fi 或以太网连接下看到网络驱动程序的名称。检查屏幕截图以供参考。
另请阅读：(Also Read:) [已解决] Windows 检测到硬盘问题([SOLVED] Windows detected a hard disk problem)
方法6：回滚网络适配器(Method 6: Rollback Network Adapter)
有时，在您更新Windows操作系统或网络驱动程序后，某些驱动程序更新可能与Windows 操作系统(Windows OS)版本不兼容，并可能导致Windows无法自动检测此网络的代理设置错误。
在这种情况下，解决方案是将网络驱动程序回滚到以前的版本，如下所示：
1. 像之前一样打开设备管理器(Device Manager)。导航到网络适配器(Network adapters )>网络驱动程序(Network driver)。
2. 右键单击您的网络驱动程序(Network driver)以打开“属性(Properties)”窗口。从顶部面板 切换到驱动程序选项卡。(Driver)
3. 单击回滚驱动程序(Rollback driver )选项，如下图所示。
注意：(Note:)如果回滚选项为灰色(grey)，则表示您没有更新驱动程序，因此您无需回滚任何内容。
4. 只需按照屏幕上的说明(on-screen instructions)将网络驱动程序回滚到以前的版本。
5. 重新启动计算机以检查Internet连接错误是否已解决。
如果这些方法对您不起作用，我们现在将讨论一些命令，您可以运行这些命令来修复无法自动检测此网络的代理设置错误的Windows 。所以，继续阅读。
方法 7：执行 SFC 扫描 (Method 7: Perform SFC scan )
由于系统上损坏的系统文件可能会改变网络代理(Proxy)设置，因此执行SFC（系统文件检查器(System File Checker)）扫描应该可以帮助您修复无法自动检测到此网络代理设置错误的 Windows。SFC命令将搜索损坏的系统文件并将其替换为正确的文件。
以下是如何在您的 PC 上 执行SFC扫描。(SFC)
1.在Windows 搜索(Windows search)栏中 键入命令提示符。(command prompt)
2. 单击以管理员身份运行(Run as administrator)以启动具有管理员权限的命令(Command)提示符。
3.当您在屏幕上收到提示消息时， 单击是。(Yes)
4. 现在，输入sfc/scannow并按Enter，如下所示。
5. 最后，等待命令执行。然后，检查错误是否已修复。
方法 8：使用 Winsock 重置命令 (Method 8: Use Winsock Reset Commands )
通过使用Winsock 重置(Winsock Reset)命令，您可以将Winsock设置重置为默认设置或出厂设置。如果某些不需要的更改导致Windows无法在您的系统上自动检测到此网络的代理设置错误，则使用Winsock重置命令将解决此问题。
以下是运行Winsock重置命令的步骤：
1. 使用管理权限启动命令提示符(Command Prompt)，如上所述。
2. 逐一键入以下命令，并在每个命令后 按Enter键。(Enter)
netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns
3.命令运行后，重新启动(restart)计算机并检查是否能够 修复无法自动检测此网络代理设置错误的 Windows。( fix Windows that could not automatically detect this network’s proxy settings error.)
另请阅读：(Also Read:) 修复无法连接到 Windows 10 中的代理服务器(Fix Unable to connect to the proxy server in Windows 10)
方法 9：运行(Method 9: Run )病毒或恶意软件扫描 (Virus or Malware Scan )
据观察，系统中的恶意软件或病毒可能是连接问题背后的原因，因为它们会改变网络配置，从而阻止您访问它们。尽管扫描此类感染并摆脱这些感染将帮助您修复Windows代理设置错误。
市场上有几种防病毒软件。但我们建议使用以下防病毒软件来运行恶意软件扫描。
a) Avast Antivirus： 如果您不想为高级计划付费，可以下载此软件的免费版本。该软件非常棒，可以很好地找到您计算机上的任何恶意软件或病毒。您可以从他们的 官方网站(official website.)下载Avast Antivirus 。
b) Malwarebytes： 您的另一个选择是 Malwarebytes，这是一个免费版本，用于在您的计算机上运行恶意软件扫描。您可以轻松摆脱计算机中不需要的恶意软件。
安装上述任一软件后，请按以下步骤操作：
1. 启动软件并在您的计算机上运行全面扫描(run a full scan on your computer)。这个过程可能需要时间，但你必须要有耐心。
2. 如果防病毒程序检测到任何恶意数据，您可以选择将其隔离或从计算机中删除。
3.删除所有此类文件( Delete all such files)，然后重新启动计算机，您可能能够解决错误。
4. 如果没有，请阅读本指南以从您的计算机中删除不需要的恶意软件(remove unwanted malware)和病毒。
方法 10：关闭代理、VPN、防病毒和(Method 10: Turn off Proxy, VPN, Antivirus and )防火墙(Firewall)
Windows Defender 防火墙(Windows Defender Firewall)、第三方VPN服务和代理(Proxy)网络服务器之间可能存在网络干扰，导致Windows无法自动检测此网络的代理设置错误消息。
请按照以下步骤解决此类冲突：
1. 按键盘上的Windows + I keys启动设置(Settings)。
2. 单击网络和 Internet(Network and Internet)选项。
3.从左侧面板中 选择代理。(Proxy)
4.关闭(Toggle off)手动代理设置(Manual proxy setup )部分 下的“为 LAN 使用代理服务器”选项（这些设置不适用于拨号或 VPN 连接） 。(Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections))为清楚起见，请参阅下面的图片。
5.从桌面任务栏(taskbar)本身关闭VPN 。
现在，检查问题是否已解决，如果没有，则暂时禁用防病毒(temporarily disable the Antivirus)和 Windows Defender 防火墙：
1. 键入病毒和威胁防护( virus and threat protection)并从搜索结果中启动它。
2. 在设置窗口中，单击如图所示管理设置(Manage settings)。
3. 现在，关闭下面显示的三个选项的切换( toggle off)，即实时保护、云交付保护(Real-time protection, Cloud delivered protection, )和自动样本提交。(Automatic sample submission.)
4. 接下来，在Windows 搜索(Windows search)栏中键入防火墙并启动防火墙和网络保护。(Firewall and network protection.)
5. 关闭Private network、Public network和Domain network的切换开关，如下所示。
6. 如果您有第三方杀毒软件，请启动(launch)它。
7.现在，转到Settings > Disable，或类似的选项暂时禁用防病毒保护。
8.最后，检查打不开的应用程序现在是否正在打开。
9. 如果没有，请重新打开病毒和防火墙保护。
方法 11：执行系统还原(Method 11: Perform System Restore)
当您恢复您的 PC 时，所有最近的驱动程序更新和程序文件都会从您的系统中删除。它将您的系统恢复到您的网络(Network)连接正常工作时的状态，并且还将修复无法自动检测此网络的代理设置(fix Windows that could not automatically detect this network’s proxy settings) 错误的 Windows。此外，您不必担心您的个人数据，因为它在系统还原期间不会受到影响。
系统还原(System Restore)始终可以解决错误；因此，系统还原(System Restore)绝对可以帮助您修复此错误。因此，不浪费任何时间运行系统还原( run system restore)到修复 Windows 无法自动检测此网络的代理设置。(Fix Windows could not automatically detect this network’s proxy settings.)
受到推崇的：(Recommended:)
我们希望本指南对您有所帮助，并且您能够 修复无法(fix Windows that could not automatically detect this network’s proxy settings)在您的系统上自动检测到此网络的代理设置错误的 Windows。让我们知道哪种方法最适合您。如果您对上述指南有任何疑问，请在下面的评论中告诉我们。
Fix Windows could not automatically detect this Network's Proxy settings
Windows comes prе-installed with a troubleshooting featυre that allоws you to detect and fix connectivity issues and other technical problems on your Windows systems. Wheneνer you use the troublеshootеr to scan fоr errоrs, it automatically detеcts and resolνes them. Often, the troubleshooter detects the problem but doeѕn’t recommend anу solutions for it. In such cases, you will see a yellow warning sign next to your Wi-Fi icon. Now, when you run the network troubleshooter, you might encounter an errоr meѕsage that states Windows could not automatically detеct this network’s рroxy settings.
Fortunately, there are several ways that you can utilize to fix this network error on your system. Through this guide, we have explained the various reasons for this error and how you can fix Windows that could not automatically detect this network’s proxy settings issue.
Fix Windows could not automatically detect this Network’s Proxy settings
Reasons for Windows could not automatically detect this network’s proxy settings error
The common reason for this error to occur is due to changes in the proxy settings of your operating system. These settings may get altered due to
- Virus/malware on your computer or
- Changes in Windows operating system files.
Given below are few simple methods to fix the proxy settings error on your Windows system.
Make sure to create a restore point just in case something goes wrong.
Method 1: Restart the Network Adapter
Restarting your Network Adapter can help you fix pesky connection issues on your Windows computers. Follow the given steps to do so:
1. Press Windows + I keys on your keyboard to launch Windows settings.
2. Click on Network and Internet, as shown.
3. Under the Status tab, click on Change adapter options, as depicted.
4. Now, select either a Wi-Fi network or Ethernet for LAN connection. Click on Disable this network device from the toolbar.
5. Wait for about 10-15 seconds.
6. Finally, select your network connection again and click on Enable this network device from the toolbar as before.
Method 2: Change Adapter IP settings
If you are unable to access the Internet, then you can try to disable the manual IP address or the DNS configuration on your system. Many users were able to fix Windows that could not automatically detect this network’s proxy settings error by enabling Windows to automatically acquire the IP address and DNS server address. Follow the given steps for the same:
1. Launch Windows Settings and go to Network and Internet section as you did in the previous method.
2. Select Change adapter options under the Status tab, as shown.
3. Select your internet network (Wi-Fi or Ethernet) and right-click to select Properties, as depicted below.
4. Locate Internet Protocol Version 4 (TCP/IPv4) from the given list. Click on Properties as depicted in the screenshot.
5. Under the General tab, enable the options titled Obtain an IP address automatically and Obtain DNS server address automatically.
6. Finally, click on OK to save the changes, as shown.
Also Read: Fix Windows could not automatically detect this network’s proxy settings
Method 3: Reset Network Settings
If you are still unable to access your Internet connection, try to reset your network settings. When you reset the network settings, it will reset the VPN and proxy servers. It will also roll back the network configurations to their default state. Follow the given steps to reset your network settings to fix Windows that could not automatically detect this network’s proxy settings.
Note: Make sure you close all the background running programs or applications before you proceed with Network reset.
1. Launch Windows Settings and click Network and Internet, as earlier.
2. Scroll down and click on Network reset, as shown.
3. Click YES in the confirmation window that pops up.
4. Finally, your system will automatically reset the Network settings and restart your computer.
The Windows could not automatically detect this network’s proxy settings error should be rectified by now. If not, try the succeeding methods.
Method 4: Disable Proxy Server
Disabling the proxy server option was able to fix this issue for many Windows users. Here is how to disable the proxy server option on your Windows system:
1. Launch Run by pressing the Windows + R keys together on your Keyboard.
2. Once the Run dialog box appears on your screen, type inetcpl.cpl and hit Enter. Refer to pic below.
3. The Internet Properties window will appear on your screen. Switch to the Connections tab.
4. Click on LAN settings, as depicted.
5. Now, make sure you uncheck the box next to the option titled Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections).
6. Finally, click on OK to save these changes, as shown.
Now, check whether you are able to access your Internet connection. If not, there might be an issue with Network Drivers installed on your system. We shall fix these problems in the following methods.
Method 5: Update Network Drivers
If you are encountering issues with your Internet connection and are unable to run the network troubleshooter, then you may be using outdated network drivers on your system. If the network drivers are corrupt or obsolete, you are bound to experience connectivity issues on your system.
To update network drivers, follow these steps:
1. Go to the Windows search bar and type Device Manager. Launch it from the search results.
2. Locate and expand Network adapters by double-clicking on them.
3. You will see a list of network drivers installed on your computer. Make a right-click on your Network driver and click on Update driver from the given menu. Refer to pic below.
4. A new window will appear on your screen. Here, select Search automatically for drivers.
Windows will automatically update your network driver to its latest version.
Note: If you don’t remember your network driver, you can navigate to Settings > Network and Internet > Status > Change adapter options. You will be able to see the name of the network driver under your Wi-Fi or Ethernet connection. Check the screenshot for reference.
Also Read: [SOLVED] Windows detected a hard disk problem
Method 6: Rollback Network Adapter
Sometimes, after you update your Windows operating system or your network driver, it is possible that certain driver updates are incompatible with the version of Windows OS and might lead to Windows could not automatically detect this network’s proxy settings error.
In such situations, the solution is to roll back the network driver to its previous version as instructed below:
1. Open Device Manager as earlier. Navigate to Network adapters > Network driver.
2. Right-click on your Network driver to open the Properties window. Switch to the Driver tab from the panel on the top.
3. Click on the Rollback driver option, as depicted below.
Note: If the rollback option is in grey, it means you did not update the driver, and thus, you need not roll back anything.
4. Simply follow the on-screen instructions to roll back the network driver to the previous version.
5. Restart your computer to check whether the Internet connectivity error is resolved.
If these methods haven’t worked for you, we shall now discuss few commands that you can run to fix Windows that could not automatically detect this network’s proxy settings error. So, keep reading.
Method 7: Perform SFC scan
Since corrupt system files on your system can alter network Proxy settings hence, performing an SFC (System File Checker) scan should help you fix Windows that could not automatically detect this network’s proxy settings error. SFC command will search for corrupt system files and replace these with the correct ones.
Here is how to perform an SFC scan on your PC.
1. Type the command prompt in the Windows search bar.
2. Click on Run as administrator to launch Command prompt with administrator rights.
3. Click Yes when you get a prompt message on your screen.
4. Now, type sfc/scannow and hit Enter, as shown below.
5. Finally, wait for the command to be executed. Then, check if the error is fixed.
Method 8: Use Winsock Reset Commands
By using the Winsock Reset commands, you can reset the Winsock settings back to default or factory settings. If some undesired changes are causing Windows could not automatically detect this network’s proxy settings error on your system, using the Winsock reset commands will resolve this problem.
Here are the steps to run Winsock reset commands:
1. Launch Command Prompt with administrative rights as explained above.
2. Type the following commands one by one and press the Enter key after every command.
netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns
3. Once the commands have run, restart your computer and check whether you were able to fix Windows that could not automatically detect this network’s proxy settings error.
Also Read: Fix Unable to connect to the proxy server in Windows 10
Method 9: Run Virus or Malware Scan
It has been observed that malware or virus in your system might be the reason behind connectivity issues as they alter network configurations thereby, preventing you from accessing them. Although scanning for such infections and getting rid of these will help you fix Windows proxy settings error.
There are several antivirus software available in the market. But we recommend the following antivirus software to run a malware scan.
a) Avast Antivirus: You can download the free version of this software if you don’t want to pay for a premium plan. This software is pretty great and does a decent job finding any malware or viruses on your computer. You can download Avast Antivirus from their official website.
b) Malwarebytes: Another option for you is Malwarebytes, a free version for running malware scans on your computer. You can easily get rid of unwanted malware from your computer.
After installing any one of the above-mentioned software, follow these steps:
1. Launch the software and run a full scan on your computer. The process may take time, but you have to be patient.
2. If the antivirus program detects any malicious data, you will be given an option to quarantine them or remove them from your computer.
3. Delete all such files then restart your computer and you may be able to resolve the error.
4. If not then read this guide to remove unwanted malware and viruses from your computer.
Method 10: Turn off Proxy, VPN, Antivirus and Firewall
There might be network interference between Windows Defender Firewall, third-party VPN services, and Proxy network servers, resulting in Windows could not automatically detect this network’s proxy settings error message.
Follow these steps to resolve such conflicts:
1. Press Windows + I keys on your keyboard to launch Settings.
2. Click on the Network and Internet option.
3. Select Proxy from the panel on the left.
4. Toggle off the option stating Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections) under the Manual proxy setup section. Refer to pic below for clarity.
5. Turn off the VPN from the desktop taskbar itself.
Now, check if the problem is resolved, if not then temporarily disable the Antivirus and Windows Defender firewall:
1. Type virus and threat protection and launch it from the search result.
2. In the settings window, click on Manage settings as depicted.
3. Now, turn the toggle off for the three options shown below, viz Real-time protection, Cloud delivered protection, and Automatic sample submission.
4. Next, type firewall in the Windows search bar and launch Firewall and network protection.
5. Turn the toggle off for Private network, Public network, and Domain network, as highlighted below.
6. If you have third-party antivirus software, then launch it.
7. Now, go to Settings > Disable, or options similar to it to disable antivirus protection temporarily.
8. Lastly, check if the apps that won’t open are opening now.
9. If not, turn the virus and firewall protection back on.
Method 11: Perform System Restore
When you restore your PC, all recent driver updates and program files are deleted from your system. It will restore your system to the state when your Network connection was working smoothly and will also fix Windows that could not automatically detect this network’s proxy settings error. Moreover, you don’t have to worry about your personal data as it would remain unaffected during system restore.
System Restore always works in resolving the error; therefore System Restore can definitely help you in fixing this error. So without wasting any time run system restore to Fix Windows could not automatically detect this network’s proxy settings.
Recommended:
We hope this guide was helpful, and you were able to fix Windows that could not automatically detect this network’s proxy settings error on your system. Let us know which method worked for you the best. If you have any queries regarding the above guide, let us know in the comments below.
