修复 Windows 无法找到或启动摄像头： ^{(Fix Windows can’t find or start the camera: )}如果您遇到错误代码 0xA00F4244 (0xC00D36D5) 的错误“我们找不到您的摄像头”，则原因可能是防病毒软件阻止了网络摄像头/摄像头或网络摄像头的驱动程序过时. 您的网络摄像头或相机应用程序可能无法打开，并且您会收到一条错误消息，指出我们无法找到或启动您的相机，包括上述错误代码。因此，不要浪费任何时间，让我们看看如何在下面列出的故障排除指南的帮助下实际修复 Windows^{(Fix Windows)}无法找到或启动相机。

修复 Windows^{(Fix Windows)}无法找到或启动相机

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法一：暂时禁用防病毒和防火墙^{(Method 1: Temporarily Disable Antivirus and Firewall)}

1.右键单击系统托盘中的防病毒程序图标^{( Antivirus Program icon)}，然后选择禁用。^(Disable.)

2.接下来，选择防病毒软件将保持禁用的时间范围。^{( Antivirus will remain disabled.)}

注意：选择尽可能少的时间，例如 15 分钟或 30 分钟。

3.完成后，再次尝试打开网络摄像头并检查错误是否解决。

4.按 Windows 键 + X 然后选择控制面板。^{( Control Panel.)}

5.下一步，点击系统和安全。^{( System and Security.)}

6.然后点击Windows防火墙。^{(Windows Firewall.)}

7.现在从左侧窗格中单击打开或关闭Windows 防火墙^{(Turn Windows Firewall)}。

8.选择关闭 Windows 防火墙并重新启动您的 PC。^{(Select Turn off Windows Firewall and restart your PC. )}再次尝试打开更新 Windows^{(Update Windows)}并查看您是否能够 修复 Windows 无法找到或启动相机错误。^{(Fix Windows can’t find or start the camera error.)}

如果上述方法不起作用，请确保按照完全相同的步骤再次打开防火墙。

方法2：确保相机已开启^{(Method 2: Make sure Camera is turned ON)}

1.按Windows Key + I 打开Windows 设置^{(Windows Settings)}，然后单击隐私。^(Privacy.)

2.从左侧菜单中选择相机。^(Camera.)

3.确保相机^(Camera)下方的“让应用程序使用我的相机硬件^{(Let apps use my camera hardware)}”的切换开关已打开。

4.关闭设置并重新启动您的电脑以保存更改。

方法3：尝试系统还原^{(Method 3: Try System Restore)}

1.按 Windows 键 + R 并输入“ sysdm.cpl ”然后回车。

2.选择系统保护^{(System Protection)}选项卡，然后选择系统还原。^{( System Restore.)}

3.单击下一步并选择所需的系统还原点^{(System Restore point)}。

4.按照屏幕上的说明完成系统还原。

5.重新启动后，您可能能够修复Windows找不到或无法启动相机错误。^{(Fix Windows can’t find or start the camera error.)}

方法 4：回滚网络摄像头驱动程序^{(Method 4: Rollback Webcam Driver)}

1.按 Windows 键 + R 然后键入devmgmt.msc并按Enter打开设备管理器^{(Device Manager)}。

2.展开成像设备或声音、视频和游戏控制器或相机^{( Imaging devices or Sound, video and game controllers or Cameras)}，并在其下方找到您的网络摄像头。

3.右键单击您的网络摄像头并选择属性。^{(Properties.)}

4.切换到驱动程序选项卡^{(Driver tab)}，如果回滚驱动程序^{(Roll Back Driver)}选项可用，请单击它。

5.选择是^{( Yes)}继续回滚并在过程完成后重新启动您的 PC。

6.再次检查您是否能够修复Windows无法找到或启动相机或未连接相机^{(no cameras are attached)(fix Windows can’t find or start the camera or no cameras are attached)}错误。

方法 5：卸载网络摄像头驱动程序^{(Method 5: Uninstall Webcam Driver)}

1.按 Windows 键 + R 然后按devmgmt.msc并按 Enter。

2.展开摄像头^(Cameras)，然后右键单击您的网络摄像头并选择卸载设备。^{(Uninstall device.)}

3.现在从操作中选择“扫描硬件更改。^{(Scan for hardware changes.)}“

4.重新启动您的 PC 以保存更改。

方法 6：重置网络摄像头^{(Method 6: Reset Webcam)}

1.按 Windows 键 + I 打开Windows 设置。^{(Windows Settings.)}

2.单击应用程序^(Apps)，然后从左侧菜单中选择应用程序和功能。^{(Apps & features.)}

3.在列表中找到相机应用程序^{(Camera app)}，然后单击它并选择高级选项。^{(Advanced options.)}

4.现在单击重置^(Reset)以重置相机应用程序。

5.重新启动您的 PC 以保存更改并查看您是否能够 修复 Windows 无法找到或启动相机错误。^{( Fix Windows can’t find or start the camera error.)}

方法 7：注册表修复^{(Method 7: Registry Fix)}

1.按 Windows 键 + R 然后键入regedit并按Enter打开注册表编辑器^{(Registry Editor)}。

2.导航到以下注册表项：

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Media Foundation\Platform

3.右键单击平台^(Platform)，然后选择New > DWORD (32-bit) value.

4.将此新的 DWORD 命名为EnableFrameServerMode。

5.双击EnableFrameServerMode并将其值更改为 0。^{( change it’s value to 0.)}

6.单击确定并关闭注册表编辑器。

为你推荐：^{(Recommended for you:)}

• 从 Microsoft Edge 移除 Fake Virus 警告
• 修复 Windows 10 上的 WHEA_UNCORRECTABLE_ERROR^{(Fix WHEA_UNCORRECTABLE_ERROR on Windows 10)}
• 如何完全控制或拥有 Windows 注册表项^{(How to Take Full Control or Ownership of Windows Registry Keys)}
• 修复服务无法启动 Windows Defender 错误 0x80070422^{(Fix The Service Couldn’t Be Started Windows Defender Error 0x80070422)}

就是这样，您已成功修复 Windows 无法找到或启动相机错误^{(Fix Windows can’t find or start the camera error)}，但如果您对本指南仍有任何疑问，请随时在评论部分提出。

Fix Windows can't find or start the camera

Fix Windows can’t find or start the camera: If you are facing the error “We can’t find your camera” with error code 0xA00F4244 (0xC00D36D5) then the cause might be antivirus blocking the webcam/camera or outdated drivers of the webcam. It’s possible that your webcam or camera app won’t open and you will get an error message saying we can’t find or start your camera including the above error code. So without wasting any time let’s see how to actually Fix Windows can’t find or start the camera with the help of below-listed troubleshooting guide.

Fix Windows can’t find or start the camera

Make sure to create a restore point just in case something goes wrong.

Method 1: Temporarily Disable Antivirus and Firewall

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

2.Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3.Once done, again try to open webcam and check if the error resolves or not.

4.Press Windows Key + X then select Control Panel.

5.Next, click on System and Security.

6.Then click on Windows Firewall.

7.Now from the left window pane click on Turn Windows Firewall on or off.

8.Select Turn off Windows Firewall and restart your PC. Again try to open Update Windows and see if you’re able to Fix Windows can’t find or start the camera error.

If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.

Method 2: Make sure Camera is turned ON

1.Press Windows Key + I to open Windows Settings then click on Privacy.

2.From the left-hand menu select Camera.

3.Make sure the toggle below Camera which says “Let apps use my camera hardware” is turned ON.

4.Close Settings and reboot your PC to save changes.

Method 3: Try System Restore

1.Press Windows Key + R and type”sysdm.cpl” then hit enter.

2.Select System Protection tab and choose System Restore.

3.Click Next and choose the desired System Restore point.

4.Follow the on-screen instructions to complete system restore.

5.After reboot, you may be able to Fix Windows can’t find or start the camera error.

Method 4: Rollback Webcam Driver

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand Imaging devices or Sound, video and game controllers or Cameras and find your webcam listed under it.

3.Right-click on your webcam and select Properties.

4.Switch to Driver tab and if Roll Back Driver option is available click on it.

5.Select Yes to continue with the rollback and reboot your PC once the process is complete.

6.Again check if you’re able to fix Windows can’t find or start the camera or no cameras are attached error.

Method 5: Uninstall Webcam Driver

1.Press Windows Key + R then devmgmt.msc and hit Enter.

2.Expand Cameras then right-click on your webcam and select Uninstall device.

3.Now from Action select “Scan for hardware changes.“

4.Reboot your PC to save changes.

Method 6: Reset Webcam

1.Press Windows Key + I to open Windows Settings.

2.Click on Apps and then from the left-hand menu select Apps & features.

3.Find Camera app in the list then click on it and select Advanced options.

4.Now click on Reset in order to reset camera app.

5.Reboot your PC to save changes and see if you’re able to Fix Windows can’t find or start the camera error.

Method 7: Registry Fix

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Media Foundation\Platform

3.Right-click on Platform then select New > DWORD (32-bit) value.

4.Name this new DWORD as EnableFrameServerMode.

5.Double click on EnableFrameServerMode and change it’s value to 0.

6.Click OK and close the registry editor.

Recommended for you:

• Remove Fake Virus Warning from Microsoft Edge
• Fix WHEA_UNCORRECTABLE_ERROR on Windows 10
• How to Take Full Control or Ownership of Windows Registry Keys
• Fix The Service Couldn’t Be Started Windows Defender Error 0x80070422

That’s it you have successfully Fix Windows can’t find or start the camera error but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.

Related posts

• Fix Windows无法与device or resource通信

• Fix Windows无法完成格式

• Fix Windows无法完成所要求的更改

• Fix Windows找不到Steam.exe error

• Fix Windows无法启动。最近的hardware or software change可能是原因

• Fix本网站security certificate有问题

• Fix Desktop Refers到不可用的位置

• Fix Error 0X80010108在Windows 10中

• Windows 10中Fix Unable至Delete Temporary Files

• Windows Fix Host Process Windows Services已停止工作

• Fix Windows 10 Taskbar未隐藏

• Fix BAD_SYSTEM_CONFIG_INFO Error

• 修复 Windows 已阻止此软件，因为它无法验证发布者

• Fix Windows Computer重新启动而不警告

• Fix USB Keeps Disconnecting and Reconnecting

• Fix Windows已停止此设备，因为它已有问题（Code 43）

• Fix Unable安装Network Adapter Error Code 28

• Fix Windows缺少network connectivity所需的套接字注册表条目

• Windows 10中的Fix Task Host Window Prevents Shut Down

• 如何播放Fix Firefox（2021）