Are you confused between Reboot vs. Reset vs. Restart? Don’t know what is the difference between reboot and restart? Don’t worry, in this guide we will answer all your queries, just read along!
我们已经进入了数字时代,在这个时代,甚至无法想象没有任何形式的技术互动的一天。但我们也学会了接受这些设备中的一些可能在某些或其他时候无意中失败。
我们的设备开始显示它们正在老化或即将出现故障的一种方式是,它在我们使用它时开始停止或随机冻结。它冻结的原因可能有很多,但通常情况下,只需一个小的设备重启就可以让设备运行,或者在某些极端情况下,我们可能必须完全重置设备。
重启和重启有什么区别?(What is the Difference between Reboot and Restart?)
让我们探讨一下为什么我们需要重新启动或重置设备,以及在执行一个或另一个过程时它将如何影响我们。
将这些术语彼此区分开来似乎微不足道,但在两个术语中,存在两个完全独立的定义。
了解重启和重置之间的区别也很重要,因为尽管听起来几乎完全一样,但它们执行两种截然不同的功能。
对于没有经验的人来说,这听起来可能相当令人生畏。由于它们听起来非常相似,因此很容易将它们混淆,这是理所当然的。由于结果的性质,可能会导致数据永久丢失,我们必须谨慎并注意何时可能需要重置和重新启动。
重启——(Reboot – Turn)关闭——重新开启(Turn)
如果您发现自己的笔记本电脑或计算机看起来像被冻结而没有考虑您的宝贵时间,并且您决心对此采取一些措施。所以很明显,任何人都会做的第一件事就是联系客户支持。
你会向他们解释你和笔记本电脑之间的失败关系,电脑是如何停止响应的。耐心听完之后,您可能会听到他们说出隐晦的短语,例如“您的笔记本电脑可以重启吗?” 或“你能重新启动计算机吗?” 或“我们可能不得不硬重启手机。”
如果您不理解该短语,他们会要求您找到设备的电源按钮并将其关闭并重新打开。
通常,当设备死机时,可能是因为程序的某些位没有响应或通过占用操作系统运行所需的所有硬件资源而使所有硬件紧张。
这会导致系统无限期冻结,直到失败的程序终止或操作系统运行所需的资源再次可用。这可能需要时间,可能是几秒钟、几分钟或几小时。
此外,大多数人不打坐,所以耐心是一种美德。我们需要一条捷径来度过这场磨难。幸运(Lucky)的是,我们有电源按钮,所以当我们关闭无响应的设备时,我们实际上是在耗尽设备运行所需的电源。
所有程序和应用程序,包括导致设备冻结的软件,都会从RAM中清除。因此,此时任何未保存的工作都可能会丢失,但之前保存的数据将保持不变。设备再次打开后,我们可以恢复之前的工作。
另请阅读:(Also Read:) 修复 Windows 10 卡在重启循环中(Fix Windows 10 Stuck in a Reboot Loop)
如何重新启动任何设备
我们可以使用两种类型的重启,具体取决于设备的状态,我们将不得不使用其中一种,它们是,
- 软重启(Reboot)——如果系统通过操作系统或软件重启,那么这将被称为软重启。
-
硬重启(Hard Reboot)——当设备完全冻结,并且软件或 操作系统(Operating System) 没有响应,这将导致我们无法导航到基于软件的重启时,我们将不得不求助于这个选项。在此选项中,我们尝试使用硬件而不是软件关闭设备,通常是按住电源按钮几秒钟。例如,在手机、笔记本电脑和计算机中,按下通常在个人计算机中可用的重新启动按钮,或者只需轻按开关,然后再重新打开即可。
重置(Reset)——我们可以从头开始吗?
因此,您尝试了设备上的软重启甚至硬重启,却发现设备再次无响应。
当由于应用程序故障或我们安装或更新的某些新程序而出现问题时,重新启动通常是有效的。我们可以通过卸载有问题的应用程序或回滚更新来轻松管理这一点。
但是,一旦出现影响操作系统的一些更改或更新,例如(System)安装盗版软件、免费软件或操作系统供应商本身的错误更新,我们将面临有限的选择。这些更改将难以定位,而且,如果设备本身被冻结,甚至无法进行基本的导航本身。
在这种情况下,我们在保留数据方面能做的只有这么多,而且我们必须彻底清除自首次启动设备以来发生的所有修改。
进入(Enter)“重置”模式或“恢复出厂设置”模式。这就像拥有一台时间机器,但设备可以返回到它们随附的当前配置。这将消除购买设备后必须进行的所有新修改,例如软件安装、任何下载和存储。当我们计划出售或赠送我们的任何设备时,这非常有效。所有数据都将被删除,并恢复出厂安装的操作系统版本。
另外请注意,当恢复出厂设置时,设备也可能会回滚操作系统版本中所做的更新。因此,如果 Android 设备附带Android 9,并且在将设备更新到Android 10后,如果设备在新的(Android 10)操作系统(Operating)升级后开始出现故障,则设备将回滚到Android 9。
如何重置任何设备
大多数设备,如wifi路由器、电话、电脑等,都带有一个重置按钮。这可能是一个重置按钮或一个小针孔,我们必须按住并保持几秒钟,我们将不得不等待几分钟,具体取决于我们正在执行此过程的设备类型。
大多数手机、平板电脑和笔记本电脑都通过启动时间重置部署了此设备重置的替代版本。因此,按下音量调高 + 电源按钮等组合按钮应该让我们直接进入启动模式,在该模式下我们可以选择将设备恢复出厂设置。
另请阅读:(Also Read:) 如何在 Windows 10 上重置邮件应用程序(How to Reset Mail App on Windows 10)
结论
总而言之,我们讨论了重新启动和重新启动之间的主要区别,各种类型的重新启动,如何软重启和硬重启任何设备,以及重置任何设备以及为什么应该执行它。
遵循这些步骤应该可以帮助您节省时间以及为解决设备使用生命周期中可能面临的这些问题而必须进行的旅行和通话。
What is the Difference between Reboot and Restart?
Are you confused between Reboot vs. Reset vs. Restart? Don’t know what is the difference between reboot and restart? Don’t worry, in this guide we will answer all your queries, just read along!
We have entered the digital age, where it has become impossible to even imagine a day without interacting with any form of technology. But we have also learned to accept that some of these devices might fail inadvertently at some or other point.
One of the ways our devices start to show that they are aging or about to fail is that it starts to stall or randomly freeze while we are using it. There could be many reasons for it to freeze, but more often than not, just a small device restart gets the device going, or maybe in some extreme cases, we may have to reset the device completely.
What is the Difference between Reboot and Restart?
Let’s explore why we need to restart or reset a device and how it would affect us when one or the other process gets carried out.
It might seem trivial to differentiate these terms from each other, but among two terms, exist two entirely separate definitions.
It is also important to know the difference between restart and reset since they perform two very different functions despite sounding almost exactly alike.
For the inexperienced, this may sound quite daunting. Since they sound so strikingly similar, it’s easy to get confused between these and rightfully so. Because of the nature of the results, which may result in permanent loss of data, we have to be cautious and aware of when we may need to reset and restart.
Reboot – Turn it off – Turn it back on
If you ever find yourself with a laptop or a computer that looks like it is frozen with no regard to your valuable time and you are determined to do something about it. So obviously, the first thing anyone would do is contact the customer support.
You would explain to them about the failing relationship between you and the laptop, how the computer has stopped being responsive. After listening to you patiently, you might hear them utter cryptic phrases like, “Can you power cycle, your laptop ?” or “Can you please restart the computer?” or “We may have to hard reboot the phone.”
And if you don’t understand that phrase, they will ask you to locate the power button of your device and turn it off and turn it back on again.
Typically, when a device freezes, it could be because certain bits of the program is not responding or straining all of the hardware by hogging all of the hardware resources which is also required by the operating system to function.
This causes the system to freeze indefinitely until the failing program is terminated or the required resource for the operating system to function is made available again. This could take time, and it could be seconds, minutes, or hours.
Also, most people don’t meditate, so patience is a virtue. We need a shortcut to get through this ordeal. Lucky for us, we have the power button, so when we turn off the non-responsive device, we are essentially starving the device of power needed to function.
All the programs and applications, including the software that is causing the device to freeze, get wiped off the RAM. Thus, any unsaved work during this juncture might get lost, but previously saved data will remain intact. After the device gets turned back on again, we can resume the work we were doing earlier.
Also Read: Fix Windows 10 Stuck in a Reboot Loop
How to Reboot any device
There are two types of reboot available to us, depending on the state of the device we will have to resort to using one of them, and they are,
- Soft Reboot – If the system is restarted, right through the Operating system or software, then that would be called a soft reboot.
-
Hard Reboot – When the device is completely frozen, and the software or the Operating System is not responsive, which would render us unable to navigate to the software-based restart, we will have to resort to this option. In this option, we try to turn off the device using hardware instead of software, usually by keeping the power button pressed for a couple of seconds. For example, in cell phones, laptops, and computers, pressing the restart button usually available in personal computers or just by flicking the switch off and then turn it back on again.
Reset – Can we start from the beginning?
So, you tried the soft reboot and even the hard reboot on your device, only to find the device non-responsive again.
A reboot is generally effective when an issue arises due to malfunctioning applications or some new program that we installed or updated. This is something that we can manage easily by uninstalling the problematic application or roll-back the update.
However, the moment there are some changes or updates that have affected the Operating System such as the installation of pirated software, freeware, or a bad update from the Operating system vendor itself, we will be left with limited options. These changes will be hard to locate, and also, if the device itself is frozen, even undertaking basic navigation itself will be impossible.
During this situation, there is only so much we can do in terms of retaining the data, and we will have to completely erase all the modifications that took place since the time we first started the device.
Enter the “reset” mode or “factory reset” mode. It is like having a time machine but for devices to go back to the current configuration they were shipped with. This will eliminate all the new modifications that one must have made after buying the device, such as the installation of software, any downloads, and storage. This is highly effective when we are planning to sell or give away any of our devices. All of the data will be erased, and a factory-installed version of the operating system will be restored.
Also, note that when a factory reset takes place, the device may roll back the updates made in the operating system version as well. So, if an android device shipped with Android 9 and after updating the device to Android 10 if the device started malfunctioning post the new Operating system upgrade, the device will be rolled back to Android 9.
How to Reset any device
Most of the devices such as wifi routers, phones, computers, etc. come with a reset button. This could straight away be a reset button or a small pinhole, that we have to hold and keep for few seconds post which we will have to wait for a few minutes depending on the kind of device we are performing this process on.
Most of the phones, tablets, and laptops deploy an alternate version of this device reset through boot time reset. So pressing combination buttons such as volume up + power button should take us right into the boot mode where we get the option to factory reset the device.
Also Read: How to Reset Mail App on Windows 10
Conclusion
To summarize, we discussed the key differences between reboot and restart, what are various types of reboots, how to soft and hard reboot any device, as well as reset any device and why it should be performed.
Following these steps should help you save time as well as the trips and calls that one would have had to make to fix these issues that one may face during the lifetime of the device usage.