如果您收到一条错误消息 ，显示机箱侵入、致命错误……^{(Chassis Intruded, Fatal Error … System Halted)}显示器上的系统已停止；这意味着容纳主板、CPU、GPU等的机箱或机柜是打开的。^(Chasis)这是一些OEM^(OEMs)提供的安全功能，主板上的连接器可以检测机箱组件是否已被移除或更换。一些OEM^(OEMs)还提供板载扬声器或 PC 机箱扬声器，这些扬声器会在此类情况下熄灭。

机箱侵入！致命错误……系统^{(Fatal Error … System)}停止

这是一个硬件问题，在大多数情况下，您需要将跳线放回主板上，引脚标记为机箱信号和接地。有时OEM会提供一个简单的开关，当您正确关闭机箱时会自动启用该开关。因此，请检查这是否是您面临的问题。

如果这不能解决您的问题，虽然您可以通过热启动进入Windows，但正常的Windows 启动^{(Windows Boot)}不起作用。这是相当误报，与RTC RAM或BIOS的状态有关。您可能必须完全禁用机箱^(Chassis)入侵功能才能消除此错误消息。

1]清除CMOS

这可以通过短接主板上并排的两个引脚来轻松完成。^{(shorting two pins)}它可能因OEM不同而有所不同^(OEM)，但基本与透明CMOS相同。您可能需要从OEM^(OEMs)网站下载手册才能找到引脚位置。

2]启动进入BIOS

启动计算机并按DEL或 F2 键进入BIOS。重置CMOS^(CMOS)后，一切都将设置为默认值。

3]禁用机箱入侵

^{(Find Chassis)}在您的BIOS中^(BIOS)查找机箱入侵功能。它可能处于安全状态并禁用该功能。

4]重新配置BIOS

禁用机箱^(Chassis)功能后，您必须按照预期的方式或重置前的方式重新配置BIOS 。

这应该可以帮助您解决机箱^(Chassis)入侵问题。如果您仍然无法修复它，您可能必须移除负责入侵检测的电线。这方面的信息将在主板手册中提供。

Chassis Intruded ... Fatal Error ... System Halted

If you receive an еrror message saying Chassis Intruded, Fatal Error … System Halted on the monitor; it means that the Chasis or the cabinet which holds the motherboard, CPU, GPU, etc. is open. It’s a security feature offered by some OEMs where a connector found on a motherboard can detect if the chassis component has been removed or replaced. Some OEMs also offer onboard speaker or PC chassis speakers which goes off in situations like these.

Chassis Intruded! Fatal Error … System halted

This is a hardware problem, and in most of the situations, you need to put the jumper back on the motherboard with the pin labeled chassis signal and ground. Sometimes OEM offers a simple switch that is automatically armed when you close the chassis properly. So check if that’s the problem you are facing.

If this is not solving your problem, and while you may be able to get into Windows with a warm boot, normal Windows Boot doesn’t work. It’s rather false positive, and has something to do with the state of RTC RAM or BIOS. You may have to disable the Chassis intrusion feature completely to get rid of this error message.

1] Clear CMOS

This can easily be done by shorting two pins which are on the motherboard side by side. It may vary from OEM to OEM, but the basics remain the same to the clear CMOS. You may have to download the manual from the OEMs website to find the pin location.

2] Boot into BIOS

Start your computer and press DEL or F2 key to get into BIOS. Everything will be set to default after you reset CMOS.

3] Disable Chassis intrusion

Find Chassis intrusion feature in your BIOS. It could be under security and disable that feature.

4] Re-configure BIOS

After disabling the Chassis feature, you will have to reconfigure your BIOS the way you expected it to be or it was before the reset.

This should help you fix the issue with Chassis intrusion. If you are still not able to fix it, you may have to remove the wires responsible for intrusion detection. The information for this will be available in the manual of the motherboard.

Related posts

• Fix c000021A Fatal System Error上Windows 10

• Lenovo System Update：Download Lenovo Drivers，Update BIOS

• 如何检查Windows（8种方式）的BIOS version

• 如何在Windows 10输入BIOS

• UEFI BIOS & Windows 10的Recovery Environment的捷径

• Fix File System Error（-2147219195）在Windows 10上

• 6种删除系统错误内存转储文件的方法

• System Restore没有成功完成，Error Code 0x80071a90

• Windows PC Fix EVENT TRACING FATAL ERROR Blue screen错误

• 修复致命错误未找到语言文件

• 如何在Windows 10计算机上更新BIOS

• 如何修复 Windows 中的“系统修复未决”错误

• 如何修复 Windows 10 中的错误系统配置信息 BSOD 错误

• Fix Exception Processing Message意外的参数System Error

• 如何修复不和谐的致命 Javascript 错误

• 修复 Windows 10 文件系统错误 2147219196

• 如何更新主板的 BIOS

• Fix MSI.netdevicemanager40 Fatal Error用于HP设备

• 如何在VMware Workstation中access and use BIOS

• 目前的BIOS setting不完全支持boot device