修复系统线程异常未处理错误 Windows 10 (SYSTEM_THREAD_EXCEPTION_NOT_HANDLED)：^{(Fix System Thread Exception Not Handled Error Windows 10 (SYSTEM_THREAD_EXCEPTION_NOT_HANDLED): )}这是一个蓝屏死机^{( Blue Screen of Death)}(BSOD) 错误，现在可能会在何时何地发生，您将无法登录 Windows。系统线程异常未处理错误^{(The system Thread Exception not handled error)} 通常发生在启动时，此错误的一般原因是驱动程序不兼容（大多数情况下是显卡驱动程序）。

不同的人在看到蓝屏^(Screen)死机^(Death)时会收到不同的错误消息，例如：

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (nvlddmkm.sys)

上面的第一个错误是由于一个名为 nvlddmkm.sys 的文件而发生的，该文件是Nvidia显示驱动程序文件。这^(Which)意味着由于显卡驱动程序不兼容而发生蓝屏死机。现在第二个也是因为一个名为 wificlass.sys 的文件，它只是无线驱动程序文件。所以为了摆脱蓝屏死机错误，我们必须在这两种情况下处理有问题的文件。让我们看看如何修复^(fix) 系统线程异常未处理错误^{(System Thread Exception not handled error)} 窗口 10^{(windows 10)}，但首先，看看如何从恢复中打开命令提示符，因为您将在每一步中都需要它。

要打开命令提示符：

a) 放入Windows安装媒体或Recovery Drive/System Repair Disc并选择您的语言首选项，然后单击下一步^(Next)。

b) 单击底部的修复您的计算机。^{( Repair)}

c) 现在选择疑难解答^{(Troubleshoot)}，然后选择高级选项。^{(Advanced Options.)}

d) 从选项列表中选择命令提示符^{(Command Prompt)} 。

或者^(OR)

在没有安装介质或恢复光盘的情况下打开命令提示符（^{(Command Prompt)}不推荐^{(Not recommended)}）：

1. 在蓝屏死机错误时，只需使用电源按钮关闭您的 PC。
2. 当Windows^(Windows)徽标出现时，按下 ON 并突然关闭您的 PC 。
3. 重复^(Repeat)步骤 2 几次，直到Windows显示恢复选项。^{( recovery options.)}
4. 到达恢复选项后，依次转到疑难解答和^{(Troubleshoot)}高级选项^{(Advanced options)}，最后选择命令提示符。^{( Command Prompt.)}

因此，不要浪费任何时间，让我们在下面列出的故障排除指南的帮助下查看如何 修复系统线程异常^{(Fix System Thread Exception)}未处理错误 Windows 10 。^{(Error Windows 10)}

修复系统线程异常^{(Fix System Thread Exception)}未处理错误 Windows 10^{(Error Windows 10)}

方法一：卸载有问题的驱动^{(Method 1: Uninstall the problematic Driver)}

1.从上述任何一种方法打开命令提示符并键入以下命令：

bcdedit /set {default} bootmenupolicy legacy

2.按 Enter 启用旧版高级启动^{( legacy advanced boot)}菜单。

3.在命令提示符^{(Command Prompt)}中键入 exit以退出它，然后重新启动您的 PC。

4. 系统重新启动时连续按F8 键^{( F8 key)}以显示高级^(Advanced)启动选项屏幕。

5.在高级启动选项中选择安全模式^{(Safe Mode)}并按回车键。

6. 使用管理帐户^{(administrative account.)}登录到您的 Windows 。

7.如果您已经知道导致错误的文件（例如wificlass.sys），您可以直接跳到第 11 步，如果不继续。

8.从这里^(here)安装 WhoCrashed 。

9.运行WhoCrashed找出导致您出现SYSTEM_THREAD_EXCEPTION_NOT_HANDLED 错误^{( error)}的驱动程序。

10.查看“可能由^{(Probably caused by)}”你会得到驱动程序名称假设它的nvlddmkm.sys

11.一旦你有了文件名，做谷歌^(Google)搜索以获取有关文件的更多信息。

12.例如，nvlddmkm.sys是导致此问题的Nvidia 显示驱动程序文件。^{(Nvidia display driver file)}

13.向前移动，按Windows Key + R然后键入devmgmt.msc并按 Enter 打开设备管理器。

14.在设备管理器中找到有问题的设备并卸载其驱动程序。^{(uninstall its drivers.)}

15.在这种情况下，它的Nvidia显示驱动程序因此展开 显示适配器^{(Display adapters)}然后右键单击NVIDIA并选择卸载。^(Uninstall.)

16.当询问设备卸载确认时单击^{(uninstall confirmation.)}确定。^(OK)

17.重新启动您的 PC 并从制造商的网站安装最新的驱动程序。^{(manufacturer’s website.)}

方法2：重命名有问题的驱动程序^{(Method 2: Rename problematic driver)}

1.如果文件与设备管理器中的任何驱动程序没有关联，则从启动中提到的方法打开命令提示符^{(Command Prompt)}。

2.一旦你有命令提示符，输入以下命令并在每个命令后按回车：

C:
cd windows\system32\drivers
ren FILENAME.sys FILENAME.old

2.（将 FILENAME 替换^{(Replace FILENAME)}为导致问题的文件，在这种情况下，它将是：ren nvlddmkm.sys nvlddmkm.old）。

3键入退出并重新启动您的PC。看看您是否能够 修复 System Thread Exception^{(Fix System Thread Exception)} Not Handled Error，如果不能，则继续。

方法 3：将您的 PC 还原到更早的时间^{(Method 3: Restore your PC to an earlier time)}

1.放入Windows安装媒体或Recovery Drive/System Repair Disc并选择您的语言首选项^{(anguage preferences)}，然后单击下一步

2.单击底部的修复计算机。^{( Repair)}

3.现在选择疑难解答^{(Troubleshoot)}，然后选择高级选项。^{(Advanced Options.)}

4..最后，点击“系统还原^{(System Restore)}”并按照屏幕提示完成还原。

5.重新启动您的PC，此步骤可能会出现Fix System Thread Exception Not Handled Error ，但如果没有则继续。

方法四：禁用硬件加速^{(Method 4: Disable Hardware Acceleration)}

不建议使用此方法修复SYSTEM_THREAD_EXCEPTION_NOT_HANDLED错误，当且仅当您已尝试上述所有方法并且您仍然^{(SYSTEM_THREAD_EXCEPTION_NOT_HANDLED)}经常面临蓝屏死机错误^{(frequently facing the blue screen of death error.)}时，才必须使用此方法。

1.打开谷歌浏览器^{(Google Chrome)}并进入设置。

2.单击“显示高级设置^{(Show advanced settings)}”并向下滚动到“系统^(System)”部分。

3.取消选中“可用时使用硬件加速^{(Use hardware acceleration when available)}”并重新启动Chrome。^{(restart Chrome.)}

4.打开Mozilla Firefox并在地址栏中输入以下内容：  about:preferences#advanced

5.取消勾选“ Use hardware acceleration when available ”并重启Firefox。

6.对于Internet Explorer，Press Windows Key + R并键入“ inetcpl.cpl ”，然后单击“确定”。

7.在 Internet 属性窗口中选择高级选项卡。^{(the Advanced tab)}

8.选中“使用软件渲染而不是GPU渲染^{(Use software rendering instead of GPU rendering.)}”框。“

9.单击应用^(Apply)，然后单击确定并重新启动Internet Explorer。

为你推荐：^{(Recommended for you:)}

• 如何修复服务器的证书已在 chrome 中被吊销^{(How to fix Server’s certificate has been revoked in chrome)}
• 修复 Google Chrome 中无法访问此站点的错误^{(Fix This site can’t be reached error in Gooogle Chrome)}
• 修复错误代码0x80070002 系统找不到指定的文件^{(Fix Error Code 0x80070002 The system cannot find the file specified)}
• 如何修复自动修复无法修复您的电脑^{(How to fix Automatic Repair couldn’t repair your PC)}

就是这样，您已经成功修复了 Windows 10 系统线程异常未处理错误。^{(System Thread Exception Not Handled Error Windows 10.)}如果您对这篇文章仍有任何疑问，请随时在评论中提问。在社交网络上分享本指南，以帮助家人和朋友修复此错误。

Fix System Thread Exception Not Handled Error Windows 10

Fix System Thread Exception Not Handled Error Windows 10 (SYSTEM_THREAD_EXCEPTION_NOT_HANDLED): It is a Blue Screen of Death (BSOD) error which could occur out of now where and when this happens you won’t be able to log on to windows. The system Thread Exception not handled error generally occur at boot time and the general cause of this error is incompatible drivers (in most cases it’s the graphic card drivers).

Different people get different error messages when they see Blue Screen of Death like:

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (nvlddmkm.sys)

The first error above occurs because of a file called nvlddmkm.sys which is Nvidia display driver file. Which means blue screen of death occurs because of incompatible graphic card driver. Now the second one is also caused because of a file called wificlass.sys which is nothing but wireless driver file. So in order to get rid of the blue screen of death error, we must deal with the problematic file in both the cases. Let’s see how to fix System Thread Exception not handled error windows 10 but first, see how to open the command prompt from recovery because you are going to need this in each and every step.

To open Command Prompt:

a)Put in the Windows installation media or Recovery Drive/System Repair Disc and select your language preferences, and click Next.

b)Click Repair your computer at the bottom.

c)Now choose Troubleshoot and then Advanced Options.

d)Select Command Prompt from the list of options.

OR

Open Command Prompt without having installation media or recovery disc (Not recommended):

1. At the blue screen of death error, just close your PC using the power button.
2. Press ON and abruptly OFF your PC when Windows logo appears.
3. Repeat step 2 few times until Windows show you the recovery options.
4. After reaching recovery options, go to Troubleshoot then Advanced options and finally select Command Prompt.

So without wasting any time let’s see How to Fix System Thread Exception Not Handled Error Windows 10 with the help of the below-listed troubleshooting guide.

Fix System Thread Exception Not Handled Error Windows 10

Method 1: Uninstall the problematic Driver

1.Open command prompt from any one method mentioned above and type the following command:

bcdedit /set {default} bootmenupolicy legacy

2.Press Enter to enable legacy advanced boot menu.

3.Type exit in Command Prompt to exit it and then restart your PC.

4.Continuously press the F8 key at system restart to display the Advanced boot options screen.

5.On Advanced boot option select Safe Mode and press enter.

6.Log on to your Windows with an administrative account.

7.If you already know the file causing the error (eg wificlass.sys) you can skip to straight to step 11, if not continue.

8.Install WhoCrashed from here.

9.Run WhoCrashed to find out which driver is causing you the SYSTEM_THREAD_EXCEPTION_NOT_HANDLED  error.

10.Look at “Probably caused by” and you will get the driver name lets suppose its nvlddmkm.sys

11.Once you have the file name, do Google search to get more information about the file.

12.For example, nvlddmkm.sys is Nvidia display driver file which is causing this issue.

13.Moving forward, press Windows Key + R then type devmgmt.msc and press enter to open device manager.

14.In device manager go to the problematic device and uninstall its drivers.

15.In this case, its Nvidia display driver so expand Display adapters then right click on NVIDIA and select Uninstall.

16.Click OK when asked for Device uninstall confirmation.

17.Restart your PC and install the latest driver from the manufacturer’s website.

Method 2: Rename problematic driver

1.If the file is not associated with any driver in device manager then open Command Prompt from the method mentioned in starting.

2.Once you have command prompt type the following command and press enter after each one:

C:
cd windows\system32\drivers
ren FILENAME.sys FILENAME.old

2.(Replace FILENAME with your file which is causing the problem, in this case, it will be: ren nvlddmkm.sys nvlddmkm.old).

3Type exit and restart your PC. See if you’re able to Fix System Thread Exception Not Handled Error, if not then continue.

Method 3: Restore your PC to an earlier time

1.Put in the Windows installation media or Recovery Drive/System Repair Disc and select your language preferences, and click Next

2.Click Repair your computer at the bottom.

3.Now choose Troubleshoot and then Advanced Options.

4..Finally, click on “System Restore” and follow onscreen instructions to complete the restore.

5.Restart your PC and this step may have Fix System Thread Exception Not Handled Error but if it didn’t then continue.

Method 4: Disable Hardware Acceleration

This method is not recommended for fixing the SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error and this method must be used if and only if you have tried all the above methods and you are still frequently facing the blue screen of death error.

1.Open Google Chrome and go to settings.

2.Click on “Show advanced settings” and scroll down to the System section.

3.Uncheck “Use hardware acceleration when available” and restart Chrome.

4.Open Mozilla Firefox and type the following in the address bar: about:preferences#advanced

5.Uncheck “Use hardware acceleration when available” and restart Firefox.

6.For Internet Explorer, Press Windows Key + R & type “inetcpl.cpl” then click OK.

7.Select the Advanced tab in the Internet Properties window.

8.Check the box “Use software rendering instead of GPU rendering.“

9.Click Apply followed by OK and restart Internet Explorer.

Recommended for you:

• How to fix Server’s certificate has been revoked in chrome
• Fix This site can’t be reached error in Gooogle Chrome
• Fix Error Code 0x80070002 The system cannot find the file specified
• How to fix Automatic Repair couldn’t repair your PC

That’s it you have successfully fix System Thread Exception Not Handled Error Windows 10. If you still have any queries regarding this post feel free to ask them in comments. Share this guide on the social network to help family and friends fix this error.

Related posts

• Windows 10中的Fix System Service Exception Error

• 如何修复未处理的系统线程异常 BSOD

• 如何在 Windows 10 中修复系统服务异常停止代码

• 如何修复 Windows 10 中的意外存储异常错误

• Windows 10上的Fix SYSTEM SERVICE EXCEPTION Blue Screen

• 如何修复 Windows 10 中的资源管理器类未注册错误

• 修复“无法将 Windows 安装到此磁盘”错误

• 修复 Windows 10 中的 Zoom 无效会议 ID 错误

• 修复 Windows 10 中的受信任平台模块 80090016 错误

• Windows 10上的Fix WORKER_INVALID Blue Screen Error

• 在 Windows 10 上修复 iaStorA.sys BSOD 错误的 7 种方法

• 修复 Windows 中的“您需要一个新应用程序才能打开这个 ms-windows-store”错误

• 修复 Windows 10 中的句柄无效错误

• 如何在Windows 10上Fix File System Errors

• Windows 10上的Fix Device不是Migrated Error

• 如何修复 Windows 10 中缺少的系统托盘或图标

• 修复 Windows 10 中的非分页区域错误中的页面错误

• Windows 10上的Fix Steam Corrupt Disk Error

• 修复 Windows 10 上的输入网络凭据错误

• 修复 Windows 10 中的蓝牙驱动程序错误