在安全模式下启动 PC 的 5 种方法： 在^{(5 Ways to Start your PC in Safe Mode: )}Windows 10中有多种启动进入安全模式的方法，但现在你一定已经注意到，在早期版本的Windows中启动进入安全模式的旧方法不会' t 似乎在Windows 10中工作。早期用户只需在启动时按 F8 键或Shift + F8键即可启动到Windows 安全模式^{(Windows Safe Mode)}。但是随着Windows 10的引入，启动过程变得更快，因此所有这些功能都被禁用了。

这样做是因为用户并不总是需要在启动时看到高级的传统启动选项，而这只是阻碍启动，因此在Windows 10中默认禁用此选项。这并不意味着Windows 10中没有安全^{(Windows 10)}模式^(Mode)，只是有多种方法可以实现这一目标。如果您需要对 PC 问题进行故障排除，安全模式是必不可少的。与在安全模式下一样，Windows以一组有限的文件和驱动程序启动，这些文件和驱动程序对于启动Windows至关重要，但除此之外，所有 3rd 方应用程序都在安全模式下被禁用。

现在您知道为什么安全模式很重要，并且有多种方法可以在Windows 10中以^{(Windows 10)}安全模式^{(Safe Mode)}启动您的 PC ，因此您应该按照下面列出的步骤开始该过程。

以安全模式^{(Safe Mode)}启动 PC 的5种方法^(Ways)

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法 1：使用系统配置 (msconfig) 以安全模式启动 PC^{(Method 1: Start your PC in Safe Mode Using System Configuration (msconfig))}

1.按 Windows 键 + R 然后键入msconfig并按 Enter 打开系统配置。^{(System Configuration.)}

2.现在切换到启动^(Boot)选项卡并选中“安全启动^{(Safe boot)}”选项。

3.确保Minimal单选按钮^{(Minimal radio button)}被选中并单击OK。

4.选择重新启动^(Restart)以将您的 PC 引导至安全模式^(Mode)。如果您有工作要保存，请选择退出而不重新启动。

Method 2: Boot into safe mode using Shift + Restart key combination

1.打开开始菜单并点击电源按钮。^{(Power Button.)}

2.现在按住键盘上的Shift键^{(shift key)}，然后单击重新启动。^(Restart.)

3.如果由于某种原因您无法通过登录屏幕，那么您也可以使用登录屏幕中的^(Sign)Shift + Restart组合。

4.单击电源选项，按住Shift^{(hold Shift)}，然后单击重新启动。^(Restart.)

5.现在，一旦 PC 重新启动，从选择^(Choose)一个选项屏幕中，选择疑难解答。^{(Troubleshoot.)}

4.在疑难解答^{(Troubleshoot)}屏幕上，单击高级选项。^{(Advanced options.)}

5.在高级^(Advanced)选项屏幕上，单击启动设置。^{(Startup Settings.)}

6.现在从启动设置^{(Startup Settings)}中单击底部的重新启动^(Restart)按钮。

7.Windows 10^{(Windows 10)}重新启动后，您可以选择要启用的启动选项：

• 按 F4 键启用安全模式
• 按 F5^{(Press F5)}键启用^{(Enable Safe Mode)}带网络连接的安全模式^(Networking)
• 按 F6^{(Press F6)}键以使用命令提示符^{(Command Prompt)}启用安全模式^(SafeMode)

8.就是这样，您可以 使用上述方法以安全模式启动PC^{(Start your PC in Safe Mode)}，让我们继续下一个方法。

方法 3：使用设置以安全模式启动 PC^{(Method 3: Start your PC in Safe Mode Using Settings)}

1.按Windows Key + I打开设置^(Settings)应用，或者在Windows搜索中输入“设置^(setting)”打开。

2.下一步单击更新和安全^{(Update & Security)}，然后从左侧菜单中单击恢复。^(Recovery.)

3.从窗口的右侧单击高级启动^{(Advanced startup.)}下的“立即重新启动”。^{(Restart now)}

4.PC重新启动后，您将看到与上述相同的选项，即您将看到选择^(Choose)一个选项屏幕，然后是Troubleshoot -> Advanced options -> Startup Settings -> Restart.

5.选择方法2^{(Method 2)}下的步骤7中列出的各种选项以启动进入安全模式^(Mode)。

Method 4: Start your PC in Safe Mode Using Windows 10 installation/recovery drive

1.打开Command并在 cmd 中键入以下命令并按Enter：

bcdedit /set {default} safeboot minimal

注意：^(Note:)如果您想通过网络将Windows 10启动到安全模式，请改用以下命令：

bcdedit /set {current} safeboot network

2.几秒钟后您将看到一条成功消息，然后关闭命令提示符。

3.在下一个屏幕上（选择^(Choose)一个选项）单击继续。^(Continue.)

4.PC重启后会自动进入安全模式^(Mode)。

或者，您可以启用旧版高级启动选项^{(Enable legacy Advanced Boot Options)}，以便您可以随时使用 F8 或Shift + F8键启动进入安全模式。

方法 5：中断 Windows 10 启动过程以启动自动修复^{(Method 5: Interrupt the Windows 10 boot process to launch Automatic Repair)}

1.确保在Windows^(Windows)启动时按住电源按钮几秒钟以中断它。只要^(Just)确保它没有通过启动屏幕，否则您需要再次启动该过程。

2.连续3次按照Windows 10连续3次开机失败，第四次默认进入自动修复模式。^{(the fourth time it enters Automatic Repair mode by default.)}

3.当电脑第四次启动时，它将准备自动修复^{(Automatic Repair)}，并为您提供重新启动^(Restart)或高级选项的选项。^{(Advanced options.)}

4.单击高级^(Advanced)选项，您将再次进入选择选项屏幕。^{(Choose an option screen.)}

5.再次按照此层次结构进行 Troubleshoot -> Advanced options -> Startup Settings -> Restart.

6.Windows 10^{(Windows 10)}重新启动后，您可以选择要启用的启动选项：

• 按 F4 键启用安全模式
• 按 F5^{(Press F5)}键启用^{(Enable Safe Mode)}带网络连接的安全模式^(Networking)
• 按 F6^{(Press F6)}键以使用命令提示符^{(Command Prompt)}启用安全模式^(SafeMode)

7.一旦您按下所需的键，您将自动登录到安全模式^{(Safe Mode)}。

为你推荐：^{(Recommended for you:)}

• 在 Windows 10 中禁用锁定屏幕^{(Disable the Lock Screen in Windows 10)}
• 修复 嗯，我们在 Microsoft Edge 中无法访问此页面错误^{(Fix Hmm, we can’t reach this page error in Microsoft Edge)}
• 如何在 Chrome 中修复 ERR_NETWORK_CHANGED^{(How To Fix ERR_NETWORK_CHANGED in Chrome)}
• 修复 Chrome 中的 ERR_INTERNET_DISCONNECTED^{(Fix ERR_INTERNET_DISCONNECTED in Chrome)}

就是这样，您已经成功地学习了如何在安全模式下启动您的 PC，^{( How to Start your PC in Safe Mode)}但如果您对这篇文章仍有任何疑问，请随时在评论部分提出。

5 Ways to Start your PC in Safe Mode

5 Ways to Start your PC in Safe Mode: There are various ways to boot into Safe mode in Windows 10 but by now you must have noticed that the old ways through which you were able to boot into safe mode in earlier versions of Windows don’t seem to work in Windows 10. Earlier users were able to boot into Windows Safe Mode simply by pressing F8 key or Shift + F8 key on boot. But with the introduction of Windows 10, the boot process has been made much faster and hence all those features were disabled.

This was done because users don’t always need to see the advanced legacy boot options on boot which was just getting in way of booting up, so in Windows 10 this option was disabled by default. This doesn’t mean that there is no Safe Mode in Windows 10, it’s just that there are various ways in order to achieve that. Safe mode is essential if you need to troubleshoot issues with your PC. As in safe mode, Windows starts with a limited set of files and drivers which are essential for starting Windows, but other than that all the 3rd party applications are disabled in safe mode.

Now you know why safe mode is important and there are various ways to start your PC in Safe Mode in Windows 10, so it’s time you should start the process by following the below-listed steps.

5 Ways to Start your PC in Safe Mode

Make sure to create a restore point just in case something goes wrong.

Method 1: Start your PC in Safe Mode Using System Configuration (msconfig)

1.Press Windows Key + R then type msconfig and hit Enter to open System Configuration.

2.Now switch to Boot tab and check mark “Safe boot” option.

3.Make sure Minimal radio button is check marked and click OK.

4.Select Restart in order to boot your PC into Safe Mode. If you have work to save then select Exit without restarting.

Method 2: Boot into safe mode using Shift + Restart key combination

1.Open Start Menu and click on Power Button.

2.Now press & hold the shift key on the keyboard and click on Restart.

3.If for some reason you can’t get past the sign-in screen then you could use the Shift + Restart combination from the Sign In screen also.

4.Click on Power option, press and hold Shift and then click on Restart.

5.Now once the PC reboot, from the Choose an option screen, select Troubleshoot.

4.On the Troubleshoot screen, click on Advanced options.

5.On the Advanced options screen, click on Startup Settings.

6.Now from the Startup Settings click on the Restart button in the bottom.

7.Once the Windows 10 reboots, you could select which boot options you want to enable:

• Press F4 key to Enable Safe Mode
• Press F5 key to Enable Safe Mode with Networking
• Press F6 key to Enable SafeMode with Command Prompt

8.That’s it, you were able to Start your PC in Safe Mode using the above method, let’s move on to the next method.

Method 3: Start your PC in Safe Mode Using Settings

1.Press Windows Key + I to open Settings app or you could type “setting” in Windows search to open it.

2.Next click on Update & Security and from the left-hand menu click on Recovery.

3.From the right-hand side of the window click on “Restart now” under Advanced startup.

4.Once the PC reboots you will see the same option as above i.e. you will see the Choose an option screen then Troubleshoot -> Advanced options -> Startup Settings -> Restart.

5.The select the various option listed in step 7 under Method 2 to boot into Safe Mode.

Method 4: Start your PC in Safe Mode Using Windows 10 installation/recovery drive

1.Open Command and type the following command in cmd and hit Enter:

bcdedit /set {default} safeboot minimal

Note: If you want to boot Windows 10 into safe mode with network, use this command instead:

bcdedit /set {current} safeboot network

2.You will see a success message after few seconds then close the command prompt.

3.On the next screen (Choose an option) click Continue.

4.Once the PC restart, it will automatically boot into Safe Mode.

Alternatively, you could Enable legacy Advanced Boot Options so that you could boot into Safe mode anytime using the F8 or Shift + F8 key.

Method 5: Interrupt the Windows 10 boot process to launch Automatic Repair

1.Make sure to hold the power button for few seconds while Windows is booting in order to interrupt it. Just make sure it doesn’t get past the boot screen or else you need to again start the process.

2.Follow this 3 consecutive times as when Windows 10 fails to boot consecutively three times, the fourth time it enters Automatic Repair mode by default.

3.When the PC starts 4th time it will prepare Automatic Repair and will give you the option to either Restart or Advanced options.

4.Click on Advanced options and you would again be taken to Choose an option screen.

5.Again follow this hierarchy Troubleshoot -> Advanced options -> Startup Settings -> Restart.

6.Once the Windows 10 reboots, you could select which boot options you want to enable:

• Press F4 key to Enable Safe Mode
• Press F5 key to Enable Safe Mode with Networking
• Press F6 key to Enable SafeMode with Command Prompt

7.Once you have press the desired key, you will automatically log into the Safe Mode.

Recommended for you:

• Disable the Lock Screen in Windows 10
• Fix Hmm, we can’t reach this page error in Microsoft Edge
• How To Fix ERR_NETWORK_CHANGED in Chrome
• Fix ERR_INTERNET_DISCONNECTED in Chrome

That’s it you have successfully learned How to Start your PC in Safe Mode but if you still have any questions regarding this post feel free to ask them in the comment’s section.

Related posts

• 在 Windows 10 中退出安全模式的 2 种方法

• 如何在Windows 10 Boot至Safe Mode

• 为什么我的手机Stuck在Safe Mode？ 6 Ways修复它！

• 7 Ways至Fix Android卡在Safe Mode中

• 如何在 Windows 10 的启动菜单中添加安全模式

• 7 Ways在Windows 10中打开Elevated Windows PowerShell

• 3 Ways在Windows 10中更改Cursor Thickness

• 9 Ways到Fix Twitter Videos不玩

• 5 Ways在Windows 10中打开Elevated Command Prompt

• Fix Computer Wo在Windows 10中没有转到Sleep Mode

• Fix Windows 10 Apps不是Working（15 Ways）

• 您可以在Windows 10 Safe Mode安装Windows Updates吗？

• 如何在Safe Mode中Boot Mac

• 如何Download JW Player Videos（前5 Ways）

• 7 Ways至Fullscreen至Fix Taskbar Showing

• Discord Mic不是Working？ 10 Ways修复它！

• 如何在Windows退出Safe Mode

• 7 Ways至Windows 10中的Fix Critical Process Died

• 如何在Tumblr上关闭Safe Mode

• Copy Paste无效Windows 10？ 8 Ways修复它！