建议每隔一段时间通过运行Check Disk ( Chkdsk ) 检查驱动器是否有错误，因为它可以修复驱动器错误，从而提高系统性能并确保操作系统的平稳运行。^(Chkdsk)有时您无法在活动分区上运行Chkdsk以运行磁盘检查驱动器需要脱机，但这在活动分区的情况下是不可能的，这就是为什么Chkdsk计划在下次重新启动或在Windows中启动10^{(Windows 10)} . 您还可以使用命令“chkdsk /C”安排在引导或下次重新启动时使用Chkdsk检查驱动器。^(Chkdsk)

现在有时会在启动时启用磁盘^(Disk)检查，这意味着每次系统启动时，都会检查所有磁盘驱动器是否存在错误或问题，这需要相当长的时间，并且在磁盘检查完成之前您将无法访问您的 PC完全的。默认情况下，您可以通过在启动时按下一个键在 8 秒内跳过此磁盘检查，但大多数情况下这是不可能的，因为您完全忘记按任何键。

虽然检查磁盘^{(Check Disk)}( Chkdsk ) 是一个方便的功能，并且在启动时运行磁盘检查非常重要，但一些用户更喜欢运行ChkDsk的命令行版本，在此期间您可以轻松访问您的 PC。此外，有时用户会发现启动时的Chkdsk非常烦人且耗时，所以不要浪费任何时间，让我们在下面列出的教程的帮助下查看如何在Windows 10中取消计划的^{(Windows 10)}Chkdsk 。

如何在Windows 10中取消计划的^{(Windows 10)}Chkdsk

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

首先^(First)，让我们看看如何检查驱动器是否已安排在下次重新启动时进行检查：

1.打开命令提示符^{(Command Prompt)}。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

2. 键入以下命令并按Enter 键^(Enter)：

chkntfs drive_letter：

注意：^(Note:)将 drive_letter: 替换为实际的驱动器号，例如：chkntfs C:

3. 如果您收到“驱动器未脏^{(Drive is not dirty)}”的消息，则表示启动时没有安排Chkdsk。您还需要在所有驱动器号上手动运行此命令，以确保是否已安排Chkdsk 。

4. 但是，如果您收到消息说“ Chkdsk 已手动安排在卷 C: 上的下一次重新启动时运行^{(Chkdsk has been scheduled manually to run on next reboot on volume C:)}”，那么这意味着 chkdsk 已安排在 C: 驱动器上下次启动。

5.现在，让我们看看如何使用下面列出的方法取消计划的Chkdsk 。

方法 1：在命令提示符中取消 Windows 10 中的计划 Chkdsk^{(Method 1: Cancel a Scheduled Chkdsk in Windows 10 in Command Prompt)}

1.打开命令提示符^{(Command Prompt)}。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

2. 现在要在启动时取消计划的Chkdsk，在 cmd 中键入以下命令并按Enter：

chkntfs /x drive_letter:

注意：^(Note:)将 drive_letter: 替换为实际的驱动器号，例如chkntfs /x C:

3. 重启你的电脑，你不会看到任何磁盘检查。这是如何^{(How To Cancel a Scheduled Chkdsk in Windows 10)}使用命令提示符在 Windows 10 中取消计划的 Chkdsk。

方法 2：取消计划的磁盘检查并在命令提示符中恢复默认行为^{(Method 2: Cancel a Scheduled Disk Check and Restore Default Behavior in Command Prompt)}

这会将机器恢复为默认行为，并且所有磁盘驱动器都在启动时处于选中状态。

1.打开命令提示符^{(Command Prompt)}。用户可以通过搜索“cmd”然后按 Enter 来执行此步骤。

2. 在 cmd 中输入以下命令并回车^(Enter)：

chkntfs /d

3. 重新启动您的 PC 以保存更改。

方法 3：在注册表中取消 Windows 10 中的计划 Chkdsk^{(Method 3: Cancel a Scheduled Chkdsk in Windows 10 in Registry)}

这也将机器恢复到默认行为，并且在启动时检查所有磁盘驱动器，与方法 2 相同。^{(This will also restore the machine to the default behaviour and all the disk drives at checked at the boot, same as method 2.)}

1. 按 Windows 键 + R 然后键入regedit并按 Enter 打开注册表编辑器^{(Registry Editor)}。

2. 导航到以下注册表项：

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

3. 确保选择会话管理器^{(Session Manager)}，然后在右侧窗格中双击“ BootExecute ”。

4. 在“BootExecute”的值数据字段中复制并粘贴以下内容，然后单击“确定”：

autocheck autochk *

5. 关闭注册表^(Registry)并重新启动您的 PC。

受到推崇的：^{(Recommended:)}

• 在 Windows 10 中读取 Chkdsk 的事件查看器日志^{(Read Event Viewer Log for Chkdsk in Windows 10)}
• 在 Windows 10 中允许或拒绝应用程序访问相机^{(Allow or Deny Apps Access to Camera in Windows 10)}
• 在 Windows 10 中运行磁盘错误检查的 4 种方法^{(4 Ways to Run Disk Error Checking in Windows 10)}
• 在 Windows 10 中启用或禁用 Caps Lock 键^{(Enable or Disable Caps Lock Key in Windows 10)}

就是这样，您已经成功地学习了如何在 Windows 10 中取消计划的 Chkdsk，^{(How To Cancel a Scheduled Chkdsk in Windows 10)}但是如果您对本教程仍有任何疑问，请随时在评论部分提出。

How To Cancel a Scheduled Chkdsk in Windows 10

Checkіng your drivе for errors by running Check Diѕk (Chkdsk) every once in a while is recommended as it can fix driνе errors which improvеs your system performance and ensures the smooth runnіng of your operating systеm. Sometimes you can’t run Chkdsk on an active partition as to run diѕk check the drive needs to be taken оffline, but this is not possible in the case of an active partition that’ѕ whу the Chkdsk is scheduled at the next restart or boot in Windоws 10. You can also schedule a drive to be checked with Chkdsk at boot or next restart using the command “chkdsk /C”.

Now sometimes the Disk checking is enabled at boot which means every time your system boots, all of your disk drives would be checked for errors or problems which takes quite a time and you won’t be able to access your PC until the disk check is complete. By default, you can skip this disk check by pressing a key under 8 seconds on the boot, but most of the time it’s not possible as you completely forgot to press any key.

Although Check Disk (Chkdsk) is a handy feature and running disk check at boot is very important, some users prefer to run the command-line version of ChkDsk during which you can easily access your PC. Also, sometimes users find Chkdsk at boot very annoying and time-consuming, so without wasting any time let’s see How To Cancel a Scheduled Chkdsk in Windows 10 with the help of the below-listed tutorial.

How To Cancel a Scheduled Chkdsk in Windows 10

Make sure to create a restore point just in case something goes wrong.

First of all, let’s see how to check if a drive has been scheduled to be checked at the next reboot:

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Type the following command and hit Enter:

chkntfs drive_letter:

Note: Replace drive_letter: with the actual drive letter, for example: chkntfs C:

3. If you get the message that the “Drive is not dirty” then it means no Chkdsk is scheduled at the boot. You also need to manually run this command on all drive letters to ensure if a Chkdsk has been scheduled or not.

4. But if you get the message saying “Chkdsk has been scheduled manually to run on next reboot on volume C:” then it means that chkdsk has been scheduled on C: drive on the next boot.

5.Now, let’s see how to cancel the scheduled Chkdsk with the below-listed methods.

Method 1: Cancel a Scheduled Chkdsk in Windows 10 in Command Prompt

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Now to cancel a scheduled Chkdsk at boot, type the following command into cmd and hit Enter:

chkntfs /x drive_letter:

Note: Replace drive_letter: with the actual drive letter, for example, chkntfs /x C:

3. Restart your PC, and you won’t see any disk check. This is How To Cancel a Scheduled Chkdsk in Windows 10 using command prompt.

Method 2: Cancel a Scheduled Disk Check and Restore Default Behavior in Command Prompt

This will restore the machine to the default behaviour and all the disk drives at checked at the boot.

1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.

2. Type the following command into cmd and hit Enter:

chkntfs /d

3. Reboot your PC to save changes.

Method 3: Cancel a Scheduled Chkdsk in Windows 10 in Registry

This will also restore the machine to the default behaviour and all the disk drives at checked at the boot, same as method 2.

1. Press Windows Key + R then type regedit and hit Enters to open Registry Editor.

2. Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

3. Make sure select Session Manager then in the right window pane double-click on “BootExecute“.

4. In the value data field of “BootExecute” copy & paste the following and click OK:

autocheck autochk *

5. Close Registry and reboot your PC.

Recommended:

• Read Event Viewer Log for Chkdsk in Windows 10
• Allow or Deny Apps Access to Camera in Windows 10
• 4 Ways to Run Disk Error Checking in Windows 10
• Enable or Disable Caps Lock Key in Windows 10

That’s it you have successfully learned How To Cancel a Scheduled Chkdsk in Windows 10 but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.

Related posts

• Windows 10中读取Chkdsk Event Viewer Log

• 禁用Windows 10中的夹夹Zoom Feature

• 在Windows 10中创建Full System Image Backup [终极指南]

• 如何在Windows 10中创建System Image Backup

• 如何在Windows 10中删除Volume or Drive Partition

• 强制清除Windows 10中的Print Queue

• 在Windows 10中添加Printer [指南]

• 如何在Windows 10上共享Setup Network Files

• 如何在Windows 10中启用或Disable Emoji Panel

• 在Windows 10 Lock Screen上启用或禁用Cortana

• Windows 10中的Fix Black Desktop Background

• Windows 10中的Rename User Profile Folder

• 如何在Windows 10中Fix Corrupted Registry

• 为什么你需要在Windows 10中禁用Fast Startup？

• Windows 10中的Defer Feature and Quality Updates

• 如何在Windows 10 Blurry Apps到Fix Scaling

• Mouse在Windows 10连接时禁用Touchpad

• Windows 10中的Fix Microsoft Compatibility Telemetry High Disk Usage

• 在Windows 10中禁用User Account Control（UAC）

• Fix Keyboard未在Windows 10中键入