USB Device not working in Windows 10是处理USB时出现的常见问题。通常，在将打印机、扫描仪、外部^(External)驱动器、硬盘^(Hard)或笔式驱动器等^(Pen)USB设备连接到计算机后，会显示USB 设备不工作^{(USB Device not working)}错误。有时发生此错误时，设备管理器可能会在^{(Device Manager)}通用串行总线^{(Universal Serial Bus)}控制器中列出“未知设备” 。

在本指南中，您可以找到有关USB 设备在^{(USB Device)}Windows 10问题中不起作用的所有信息。在花了很多时间之后，我们提出了一些关于如何修复 USB 设备不工作问题的有效解决方案。^{( fix USB Device not working issue.)}在得出任何结论之前，请尝试下面列出的所有方法。

^(Different)处理USB 设备^{(USB Device)}不工作时可能会收到不同类型的错误：

1. USB设备无法识别
2. 设备管理器^{(Device Manager)}中无法识别的USB设备
3. USB 设备^{(USB Device)}驱动软件未成功安装
4. Windows已停止此设备，因为它报告了问题（代码 43^{(Code 43)}）。
5. Windows 无法停止您的“通用卷”设备，因为某个程序仍在使用它。

修复 USB 设备在^{(Fix USB Device)}Windows 10中不工作[已解决]

USB设备^{(USB Device)}不工作错误的常见原因：^(Causes)

1. USB 驱动程序损坏或过时。
2. USB设备可能出现故障。
3. 主机^(Host)控制器硬件故障。
4. 计算机不支持USB 2.0或USB 3.0
5. USB 通用集线器^{(USB Generic Hub)}驱动程序不兼容或已损坏。

现在让我们看看如何在下面列出的故障排除指南的帮助下 修复 USB 设备在 Windows 10 中不起作用。^{( Fix USB Device Not Working in Windows 10)}

方法一：禁用EnhancedPowerManagementEnabled^{(Method 1: Disable EnhancedPowerManagementEnabled)}

1. 按 Windows 键 + R 并输入“ devmgmt.msc ”，然后按回车键打开设备管理器^{(Device Manager)}。

2. 现在展开通用串行总线控制器^{(Universal Serial Bus controllers)}。

3. 接下来，插入遇到问题的USB设备，并注意通用串行总线^{(Universal Serial Bus)}控制器的变化，即您将看到列表随着您的设备^(Device)更新。

注意：^(Note:)您可能必须使用 hit and trial 来识别您的设备，这样做您必须多次连接/断开USB设备。断开USB^(USB)设备时，请始终使用“安全删除”选项。

4. 在通用串行总线^{(Universal Serial Bus)}控制器中识别您的设备后，右键单击它并选择属性。^{(properties.)}

5. 接下来切换到详细信息^(Details)选项卡，然后从属性^(Property)下拉列表中选择“设备实例路径。^{(Device instance path.)}“

6. 记下设备实例^{(value of the Device instance)}路径的值，因为我们将需要它或右键单击并复制它。

7. 按Windows Key + R并键入“ regedit ”，然后按回车键打开注册表编辑器^{(Registry Editor)}。

8. 导航至以下内容：

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\<Device Instance Path>\Device Parameters

9. 现在搜索DWORD EnhancedPowerManagementEnabled并双击它。

注意：^(Note:)如果通过右键单击找不到DWORD创建一个，则选择^(DWORD)新建^(New)，然后选择DWORD（32 位）值。并将DWORD^(DWORD)命名为“EnhancedPowerManagementEnabled”，然后在值中输入 0 并单击“确定”。

10. 将其值从1 更改为 0^{(1 to 0)}，然后单击 OK。

11. 您现在可以关闭注册表编辑器^{(Registry Editor)}以及设备管理器^{(Device Manager)}。

12. 重新启动您的 PC 以应用更改，这可能能够修复 USB 设备在 Windows 10 中无法工作的问题。^{(fix USB Device Not Working in Windows 10 issue.)}

方法 2：运行硬件和设备疑难解答^{(Method 2: Run Hardware and Device Troubleshooter)}

1.使用Windows搜索栏打开控制面板。^{(Control Panel)}

2.从搜索列表中选择控制面板。^{(Control Panel)}控制面板^{(Control Panel)}窗口将打开。

3.使用控制面板^{(Control Panel)}屏幕右上角的搜索栏搜索疑难解答。^{( troubleshooter)}

4.从搜索结果中单击疑难解答。^{(Troubleshooting)}

5. 故障排除窗口将打开。

6. 单击硬件和声音选项。^{(Hardware and Sound option.)}

7. 在硬件^(Hardware)和声音^(Sound)下，单击配置设备选项。^{( Configure a device option.)}

8. 系统将提示您输入管理员密码。输入密码，然后单击确认。

9.硬件^(Hardware)和设备^(Devices) 疑难解答^{(Troubleshooter)}窗口将打开。

10. 单击屏幕底部的下一步按钮^{(Next button)}以运行硬件^(Hardware)和设备^(Devices)疑难解答。

11.疑难解答将开始检测问题。如果在您的系统上发现问题，则会提示您解决问题。

方法 3：更新您的设备驱动程序^{(Method 3: Update your Device Driver)}

1. 按Windows Key + R并输入“ devmgmt.msc ”，然后按回车键打开设备管理器^{(Device Manager)}。

2. 现在展开通用串行总线控制器^{( Universal Serial Bus controllers)}。

3.接下来右键单击您之前在方法1^{(Method 1)}中识别的设备，然后选择“更新驱动程序软件。^{(Update Driver Software.)}“

4. 选择“自动搜索更新的驱动软件。^{(Search automatically for updated driver software.)}“

5. 让该过程完成，看看您是否能够解决问题。

6. 如果没有，则再次重复步骤 3。这次选择“浏览我的计算机以查找驱动程序软件。^{(Browse my computer for driver software.)}“

7. 选择“让我从计算机上的设备驱动程序列表中选择”。^{(Let me pick from a list of device drivers on my computer.)}“

8. 接下来，选择USB Mass Storage Device并单击 Next。

注意：^(Note:) 确保^(Make)选中显示^(Show)兼容硬件。

9.单击^(Click)关闭并关闭设备管理器^{(Device Manager)}。

10.重新启动以应用您的更改，这可能能够修复 USB 设备在 Windows 10 中不起作用。^{(Fix USB Device Not Working in Windows 10.)}

方法 4：自动诊断和修复 Windows USB 问题^{(Method 4: Automatically diagnose and fix Windows USB problems)}

1.导航至此链接^{(Navigate to this link)}并单击下载按钮。

2. 页面加载完成后，向下滚动，然后单击下载。^(Download.)

3. 下载文件后，双击文件打开Windows USB 疑难解答。^{(Windows USB Troubleshooter.)}

4.单击^(Click)下一步，让Windows USB 疑难解答^{(Windows USB Troubleshooter)}运行。

5. 如果您有任何连接的设备，则USB 疑难解答^{(USB Troubleshooter)}将要求确认弹出它们。

6. 检查连接到 PC 的USB设备，然后单击下一步^(Next)。

7. 如果发现问题，单击应用此修复程序。^{(Apply this fix.)}

8. 重新启动您的电脑。

方法 5：安装最新的 Intel 设备驱动程序。^{(Method 5: Install the latest Intel device drivers.)}

1.下载英特尔驱动程序更新实用程序。^{(Download the Intel Driver Update Utility.)}

2. 运行驱动程序更新实用程序^{(Driver Update Utility)}并单击下一步^(Next)。

3.接受许可协议^{(Accept the license agreement)}并单击安装。

4.等待^(Wait)英特尔驱动程序更新实用程序^{(Intel Driver Update Utility)}初始化并安装所有必需的程序和文件。

5.系统更新^{(System Update)}完成后点击启动。^(Launch.)

6. 现在选择开始扫描^{(Start Scan)}，当驱动程序扫描完成后，单击下载。^(Download.)

7.所有驱动程序将被下载到您^{(All the Drivers will be downloaded to your default download directory)}在左下角提到的默认下载目录中。

8. 最后，单击安装^(Install)为您的 PC安装最新的英特尔驱动程序。^(Intel)

9. 驱动安装完成后，重启电脑。

查看您是否能够修复 USB 设备在 Windows 10 中无法正常工作的问题^{( fix USB Device Not Working in Windows 10 issue)}，如果不能，则继续使用下一种方法。

方法 6：运行 Windows 磁盘错误检查^{(Method 6: Run Windows Disk Error Checking)}

1. 按Windows Key + R然后键入diskmgmt.msc并按 Enter。

2. 接下来右键单击您的USB 驱动器^{(USB drive)}并选择属性。^{(Properties.)}

3. 现在转到属性内的工具选项卡。^{(Tools tab)}

4. 单击签入错误检查。^{( Check-in Error Checking.)}

5. USB错误检查^{(USB Error Checking)}完成后，关闭所有内容，然后重新启动^(Reboot)。

为你推荐：^{(Recommended for you:)}

• 如何修复 BOOTMGR 缺少 Windows 10^{(How to fix BOOTMGR is missing Windows 10)}
• 修复驱动程序电源状态故障 Windows 10^{(Fix Driver Power State Failure Windows 10)}
• 修复系统线程异常未处理错误 Windows 10^{(Fix System Thread Exception Not Handled Error Windows 10)}
• 如何修复自动修复无法修复您的电脑^{(How to fix Automatic Repair couldn’t repair your PC)}

就是这样，您已成功修复 USB Device Not Working in Windows 10 问题^{(Fix USB Device Not Working in Windows 10 issue)}。我希望上面列出的方法之一已成功解决您的问题/问题，如果您对本指南仍有任何疑问，请随时在评论中提问。并与您的家人或朋友分享这篇文章，以帮助他们处理USB错误。

USB Device Not Working in Windows 10 [SOLVED]

USB Device not working in Windows 10 is a common problem that arises when dealing with USB. Typically USB Device not working error is shown after a USB device such as a printer, scanner, External drive, Hard disk, or Pen drive is connected to the computer. Sometimes when this error occurs, the Device Manager may list an “Unkown Device” in Universal Serial Bus controllers.

In this guide, you can find all information regarding the USB Device not working in Windows 10 issue. After spending a lot of time we have come up with these few working solutions on how to fix USB Device not working issue. Please try all the methods listed below, before you come to any conclusion.

Different types of error you may receive when dealing with USB Device not working:

1. USB Device not recognized
2. Unrecognized USB device in Device Manager
3. USB Device driver software was not successfully installed
4. Windows has stopped this device because it has reported problems (Code 43).
5. Windows can’t stop your “Generic volume” device because a program is still using it.

Fix USB Device Not Working in Windows 10 [SOLVED]

Common Causes of the USB Device not working error:

1. Corrupted or outdated USB drivers.
2. The USB device may have malfunctioned.
3. Host controller hardware malfunction.
4. The computer does not support USB 2.0 or USB 3.0
5. USB Generic Hub drivers are not compatible or are corrupted.

Now let’s see How to Fix USB Device Not Working in Windows 10 with the help of the below-listed troubleshooting guide.

Method 1: Disable EnhancedPowerManagementEnabled

1. Press Windows Key + R and type “devmgmt.msc” then hit enter to open Device Manager.

2. Now expand Universal Serial Bus controllers.

3. Next, plug in your USB device which is experiencing a problem, and notice the change in the Universal Serial Bus controllers i.e. you will see the list updated with your Device.

Note: You may have to use hit and trial in order to identify your device and in doing so you have to connect/disconnect your USB device multiple times. Always use the “Safely remove” option when disconnecting your USB device.

4. After you have identified your device in Universal Serial Bus controllers, right-click on it and select properties.

5. Next switch to Details tab and from Property drop-down select “Device instance path.“

6. Note down the value of the Device instance path because we will need it further or right-click and copy it.

7. Press Windows Key + R and type “regedit” then hit enter to open Registry Editor.

8. Navigate to the following:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\<Device Instance Path>\Device Parameters

9. Now search for the DWORD EnhancedPowerManagementEnabled and Double click on it.

Note: If you couldn’t find the DWORD create one by right-click, then select New and then DWORD (32-bit) value. And name the DWORD as “EnhancedPowerManagementEnabled” then enter 0 in the value and click OK.

10. Change its value from 1 to 0 and click OK.

11. You may now close the Registry Editor as well as Device Manager.

12. Reboot your PC to apply changes and this may be able to fix USB Device Not Working in Windows 10 issue.

Method 2: Run Hardware and Device Troubleshooter

1. Open Control Panel using the Windows search bar.

2. Select Control Panel from the search list. The Control Panel window will open up.

3. Search for troubleshooter using the search bar on the top right corner of the Control Panel screen.

4. Click on Troubleshooting from the search result.

5. The troubleshooting window will open up.

6. Click on Hardware and Sound option.

7. Under Hardware and Sound, click on Configure a device option.

8. You will be prompted to enter the administrator password. Enter the password and then click on the confirmation.

9. The Hardware and Devices Troubleshooter window will open up.

10. Click on the Next button that will be on the bottom of the screen to run the Hardware and Devices troubleshooter.

11. The troubleshooter will start detecting issues. If issues are found on your system, then you will be prompted to fix the issues.

Method 3: Update your Device Driver

1. Press Windows Key + R and type “devmgmt.msc” then hit enter to open Device Manager.

2. Now expand Universal Serial Bus controllers.

3. Next right-click on the device which you earlier identified in Method 1 and select “Update Driver Software.“

4. Select “Search automatically for updated driver software.“

5. Let the process finish and see if you’re able to fix the issue.

6. If not, then again repeat step 3. This time select “Browse my computer for driver software.“

7. Select “Let me pick from a list of device drivers on my computer.“

8. Next, select USB Mass Storage Device and click Next.

Note: Make sure Show compatible hardware is checked.

9. Click close and also close the Device Manager.

10. Reboot to apply your changes and this may be able to Fix USB Device Not Working in Windows 10.

Method 4: Automatically diagnose and fix Windows USB problems

1. Navigate to this link and click on the Download button.

2. When the page has finished loading, scroll down, and click Download.

3. Once the file is downloaded, double-click the file to open the Windows USB Troubleshooter.

4. Click next and let Windows USB Troubleshooter run.

5. IF you have any attached devices then USB Troubleshooter will ask for confirmation to eject them.

6. Check the USB device connected to your PC and click Next.

7. If the problem is found, click on Apply this fix.

8. Restart your PC.

Method 5: Install the latest Intel device drivers.

1. Download the Intel Driver Update Utility.

2. Run Driver Update Utility and click Next.

3. Accept the license agreement and click Install.

4. Wait for Intel Driver Update Utility to initialize and install all required programs and files.

5. After System Update has finished click Launch.

6. Now select Start Scan and when the driver scan is completed, click on Download.

7. All the Drivers will be downloaded to your default download directory mentioned in the bottom left.

8. Finally, click on Install to install the latest Intel drivers for your PC.

9. When the driver installation is completed, reboot your computer.

See if you’re able to fix USB Device Not Working in Windows 10 issue, if not then continue with the next method.

Method 6: Run Windows Disk Error Checking

1. Press Windows Key + R then type diskmgmt.msc and hit Enter.

2. Next right-click on your USB drive and select Properties.

3. Now go to the Tools tab inside properties.

4. Click on Check-in Error Checking.

5. When the USB Error Checking is completed, close everything, and Reboot.

Recommended for you:

• How to fix BOOTMGR is missing Windows 10
• Fix Driver Power State Failure Windows 10
• Fix System Thread Exception Not Handled Error Windows 10
• How to fix Automatic Repair couldn’t repair your PC

That’s it,  you have successfully Fix USB Device Not Working in Windows 10 issue. I hope one of the above-listed methods has fixed your problem/issue successfully and if you still have any queries regarding this guide feel free to ask them in comments. And share this post with your family or friends to help them in dealing with USB errors.

Related posts

• USB 端口在 Windows 10 中不工作 [已解决]

• Windows 10中的Mouse Pointer Lags [已解决]

• WiFi在Windows 10中断断开连接[已解决]

• Windows 10上的Computer Restarts Randomly [已解决]

• Windows 10中的Photo App Keeps Crashing [已解决]

• Nvidia Kernel Mode Driver已停止响应[已解决]

• 数字小键盘在 Windows 10 中不起作用 [已解决]

• Windows 10 PC [ Solved中没有Sound

• Windows 10中Device Driver Error中的Thread Stuck [已解决]

• Windows 10中的Fix USB Device Descriptor Failure

• Fix USB device Windows 10无法识别

• Windows 10 Creator Update无法安装[已解决]

• Windows无法完成extraction error [已解决]

• 如何创建Windows 10 Bootable USB Flash Drive

• Windows 10上的Reset Network Data Usage [指南]

• Windows Store Error Code 0x8000ffff [已解决]

• Windows 资源管理器已停止工作 [已解决]

• Windows 10 中的无效 MS-DOS 功能错误 [已解决]

• Windows 10上的Fix Device不是Migrated Error

• HDMI Port不适用于Windows 10 [已解决]