当您的Surface Pro 3冻结或您无法登录时，这可能是恢复出厂设置或软重置Surface Pro 3的时间。Surface Pro 3的软重置正在重新启动设备，因为它将关闭所有正在运行的应用程序。保存在硬盘中的数据将保持原样，而所有未保存的工作将被删除。硬重置或出厂重置或主重置会删除所有系统和用户数据。此后，它将设备更新到其最新版本。恢复出厂^(Factory)设置Surface Pro 3将是摆脱小错误和屏幕挂起或冻结等问题的最佳选择。我们为您带来了一份完美的指南，将教您如何将Surface Pro 3恢复出厂设置。您可以根据需要进行软重置或恢复出厂设置^{(You can proceed with a soft reset or a factory reset as need be)}。那么，让我们开始吧！

软重置和恢复出厂设置 Surface Pro 3^{(Soft Reset & Factory Reset Surface Pro 3)}

Surface Pro 3 软重置程序^{(Procedure for Surface Pro 3 Soft Reset)}

Surface Pro 3的软重置基本上是重启设备^{( rebooting the device)}，如下所述：

1. 按住电源^{(Power )}按钮 30 秒，然后松开。

2. 一段时间后设备关闭^{(turns OFF)}，屏幕变黑。

3. 现在，同时按住提高Volume up + Power 按钮约 15-20 秒。在此期间，设备可能会振动并闪烁Microsoft徽标。^(Microsoft)

4. 接下来，松开^(release)所有按钮并等待 10 秒钟。

5. 最后，按下并松开电源^(Power)按钮以重新启动 Surface Pro 3。

注意：^(Note:)上述步骤也适用于Surface Pro、Surface Pro 2、Surface Pro 4、Surface Book、Surface 2、Surface 3和Surface RT的软重置。

另请阅读：^{(Also read:)} 如何硬重置三星平板电脑^{(How to Hard Reset Samsung Tablet)}

完成所有这些步骤后，您的设备将进行软重置^(Reset)。然后它将重新启动并正常运行。如果问题仍然存在，建议恢复出厂^(Factory)设置，这里有两种恢复Surface ^(Factory)Pro 3^{(Surface Pro 3)}的方法。当设备设置因功能不当或设备软件更新时需要更改时，通常会执行恢复出厂设置。^(Factory)

方法一：使用电脑设置恢复出厂设置^{(Method 1: Factory Reset Using PC Settings)}

1. 向屏幕左侧滑动，然后点击设置^(Settings)。

2. 现在，点击更改 PC 设置^{(Change PC settings)}，如下图所示。

3. 在这里，从给定列表中点击更新和恢复。^{(Update and recovery)}

4. 现在，点击左侧窗格中的恢复^{(Recovery )}。

5. 点击“删除所有^{(Remove Everything and reinstall Windows.)}内容”下的“开始”并重新安装 Windows。^{(Get started )}

6. 选择只是删除我的文件^{(Just remove my files )}或完全清理驱动器。^{(Fully clean the drive.)}

注意：^(Note:)如果您打算转售您的设备，请选择完全清洁驱动器^{(Fully clean the drive)} 选项。

7. 点击下一步^(Next)确认您的选择。

注意：使用便携式^(Note:)USB电缆将您的 PC 连接到您的设备。

8. 最后，点击重置^(Reset)选项。Surface Pro 3的^{(Surface Pro 3)}出厂^(Factory)重置现在将开始。

另请阅读：^{(Also Read:)}修复 Amazon Fire 平板电脑无法打开^{( Fix Amazon Fire Tablet Won’t Turn On)}

方法 2：使用登录选项硬重置^{(Method 2: Hard Reset Using Sign-in Options)}

或者，您也可以使用此方法执行硬^(Hard)重置或恢复出厂设置 Surface Pro 3 。^{(Factory Reset Surface Pro 3)}当您从登录屏幕重新启动Surface Pro 3设备时，您会看到一个重置选项，您可以使用它，如下所示：

1. 按住电源^{(Power )}按钮关闭Surface Pro 3设备。

2. 现在，按住Shift 键^{(Shift key)}。

注意：^(Note:)如果您使用的是屏幕键盘，请单击Shift键。

3. 现在，在按住 Shift^(Shift)按钮的同时点击Restart按钮。

注意：^(Note:)如果出现提示，请选择仍然重新启动。^{( Restart anyway )}

4. 等待重启过程完成。选择一个选项^{(Choose an option )}屏幕将出现在屏幕上。

5. 现在，点击疑难解答^{(Troubleshoot )}选项，如图所示。

6. 在这里，点击重置您的 PC^{(Reset your PC )}选项。

7. 选择以下任一选项开始该过程。

• 只需删除我的文件。^{(Just remove my files.)}
• 彻底清洁驱动器。^{(Fully clean the drive.)}

8. 点击重置开始整个重置过程。^{(Reset. )}

受到推崇的^{(Recommended)}

• 如何在 Windows 10 中切换到平板电脑模式^{(How to Switch to tablet mode in Windows 10)}
• 联想序列号检查^{(Lenovo Serial Number Check)}
• 如何解决滨町隧道问题^{(How to Fix Hamachi Tunnel Problem)}
• 如何在不损失质量的情况下减小 PDF 文件大小^{(How to Reduce PDF File Size Without Losing Quality)}

我们希望本指南对您有所帮助，并且您能够对Surface Pro 3 进行软重置和出厂重置^{(soft reset and factory reset Surface Pro 3)}。如果您对本文有任何疑问或建议，请随时将它们放在评论部分。

How to Factory Reset Surface Pro 3

When your Surface Pro 3 is frozen or you are unable tо log іn then, this may bе the time to factory or soft rеset Surface Pro 3. Soft reset of Surface Pro 3 is restarting the devіce as it will close all thе running aрplications. The data saved in the hard drіve will remain as it is, wherеas all of the unsaved work will be deleted. Hard reset or factory reѕet or master reset deletes all system as well as usеr data. Therеafter, it updates the device to its latest version. Factory reset Surface Pro 3 would be the best optіon to get rid of minor bugs and issues like screen hang or freeze. We bring to you a perfеct guide that will teach you how to factory reset Surface Pro 3. You can proceed with a soft reset or a factory reset as need be. So, let us begin!

Soft Reset & Factory Reset Surface Pro 3

Procedure for Surface Pro 3 Soft Reset

The soft reset of the Surface Pro 3 is basically, rebooting the device as explained below:

1. Press and hold the Power button for 30 seconds and let go.

2. The device turns OFF after a while and the screen turns black.

3. Now, press-hold the Volume up + Power buttons together for about 15-20 seconds. The device may vibrate and flash the Microsoft logo during this time.

4. Next, release all the buttons and wait for 10 seconds.

5. Finally, press and release the Power button to reboot Surface Pro 3.

Note: The above procedure is also applicable for the soft reset of Surface Pro, Surface Pro 2, Surface Pro 4, Surface Book, Surface 2, Surface 3, and Surface RT.

Also read: How to Hard Reset Samsung Tablet

Once you complete all these steps, your device will undergo a soft Reset. It will then restart and function properly. If the problem persists, it is advised to go for Factory reset, and here are the two ways on how to Factory reset Surface Pro 3. Factory reset is usually carried out when the device setting needs to be altered due to improper functionality or when a device’s software gets updated.

Method 1: Factory Reset Using PC Settings

1. Swipe to the left of the screen and tap Settings.

2. Now, tap Change PC settings, as shown below.

3. Here, tap Update and recovery from the given list.

4. Now, tap Recovery from the left pane.

5. Tap on Get started under Remove Everything and reinstall Windows.

6. Choose either Just remove my files or Fully clean the drive.

Note: If you plan to resell your device, opt for the Fully clean the drive option.

7. Confirm your choice by tapping Next.

Note: Connect your PC to your device using a portable USB cable.

8. Finally, tap the Reset option. Factory reset of Surface Pro 3 will begin now.

Also Read: Fix Amazon Fire Tablet Won’t Turn On

Method 2: Hard Reset Using Sign-in Options

Alternatively, you can also perform a Hard or Factory Reset Surface Pro 3 by using this method. When you restart your Surface Pro 3 device from the sign-in screen, you get a reset option and you can utilize the same, as follows:

1. Press and hold the Power button to turn off your Surface Pro 3 device.

2. Now, tap-hold the Shift key.

Note: If you are using an on-screen keyboard, then click on the Shift key.

3. Now, tap the Restart button while still holding the Shift button.

Note: Choose Restart anyway prompt, if it appears.

4. Wait for the restart process to be completed. The Choose an option screen will appear on the screen.

5. Now, tap on Troubleshoot option, as shown.

6. Here, tap the Reset your PC option.

7. Choose any one of the following options to begin the process.

• Just remove my files.
• Fully clean the drive.

8. Begin the entire reset process by tapping on Reset.

Recommended

• How to Switch to tablet mode in Windows 10
• Lenovo Serial Number Check
• How to Fix Hamachi Tunnel Problem
• How to Reduce PDF File Size Without Losing Quality

We hope that this guide was helpful and you were able to soft reset and factory reset Surface Pro 3. If you have any queries, or suggestions regarding this article, then feel free to drop them in the comments section.

Related posts

• 如何创建Password Reset Disk

• Windows 10中Reset Folder View Settings至Default

• 如何Factory Reset Samsung Galaxy S6

• 如何在Windows 10中DNS Cache DNS Cache

• 如何Hard & Soft Reset Roku（Factory Reset）

• Fix Unable打开Local Disk（c :)

• 如何恢复出厂设置 Windows 11

• 修复task image已损坏或被篡改

• 如何在Windows 10中禁用粘滞Corners

• Fix Error 0X80010108在Windows 10中

• 如何在Windows 10上运行JAR Files

• 3 Ways至Windows 10中的Increase Dedicated VRAM

• 如何Factory Reset Google Pixel 2

• 3 Ways至Combine Multiple Internet Connections

• Windows 10中的Fix Black Desktop Background

• 禁用Windows 10中的夹夹Zoom Feature

• Windows 10 User Find Security Identifier（SID）

• Windows Fix Host Process Windows Services已停止工作

• Fix Windows无法与device or resource通信

• Taskbar icon间距在Windows 10或Surface Pro device中太宽