Amazon Fire 平板电脑(Amazon Fire Tablet)是打发时间的首选设备，因为它可以无缝传输您最喜爱的节目和电影以及大量书籍。但是，当您因为您的Amazon Fire平板电脑无法开启而无法享受其中任何一项时，您会怎么做？它的发生有几个原因。当您以不正确的方式按下电源(Power)按钮时，或者存在某些软件问题时，Amazon Fire平板电脑将无法打开。如果您也在处理同样的问题，那么您来对地方了。我们提供了一个完美的指南，可以帮助您解决 Amazon Fire 平板电脑无法开机的问题。(fix the Amazon Fire tablet won’t turn ON issue.)您必须阅读到最后，以了解可以帮助您解决此问题的各种技巧。
如何修复 Amazon Fire 平板电脑无法启动(How to Fix Amazon Fire Tablet Won’t Turn On)
这里有一些方法可以帮助您修复Amazon Fire 平板电脑无法开机的(Amazon Fire tablet won’t turn on)问题。
方法一：按住电源键(Method 1: Hold the Power Button)
在使用Amazon Fire平板电脑时，用户最常犯的错误是点击一次电源按钮后离开。(Power)正确的开启方式是：
1. 按住电源按钮(power button)至少 5 秒钟。
2. 5 秒后，您将听到启动声音，(bootup sound,) Amazon Fire(Amazon Fire)平板电脑开启。
方法 2：使用交流适配器为平板电脑充电(Method 2: Charge the Tablet using AC Adapter)
当Amazon Fire平板电脑电量为零或电量不足时，它将进入省电(power saver)模式。在这个阶段，平板电脑将没有足够的电量自行重启，也无法开机。
注意：(Note:)在开始执行故障排除步骤之前，请先为您的设备充电。
1. 将Amazon Fire平板电脑连接到其交流适配器(AC adapter)并放置几个小时（大约 4 小时）以将电池充满电。
提示：(Tip:)建议按住电源(Power)键二十秒，并确保在充电前将其关闭。这会将Amazon Fire平板电脑从省电模式中释放出来。此外，它将不再处于睡眠模式。
2. 一旦平板电脑获得足够的电量重新启动，您会注意到电源端口旁边的(light)绿灯。(green)
如果指示灯没有从红色变为绿色，则表明您的设备根本没有充电。这可能是设备问题，或者您没有使用 apt 交流适配器进行充电。
另请阅读：(Also Read:) 购买亚马逊消防电视棒之前应该知道的 6 件事(6 Things You should know Before You Buy an Amazon Fire TV Stick)
方法 3：软件更新(Method 3: Software Update)
几分钟不活动将导致Amazon Fire平板电脑进入睡眠模式。有时，正在运行的应用程序可能会阻止平板电脑退出睡眠模式。有些人可能认为设备没有打开，但设备实际上可能处于睡眠状态。如果软件未更新到最新版本，则可能会产生此问题。要修复它，请按照给定的步骤操作：
1. 按住电源(Power )+提高音量(Volume Up)按钮一分钟。如果平板电脑处于睡眠模式，它现在将处于唤醒状态。
2. 再次同时按住电源(Power )+提高音量(Volume Up)按钮，直到您在屏幕上看到安装最新软件提示。(Installing the latest software )
3. 软件更新完成后，进行下一个方法中介绍的软重置。
完成后，重新启动您的设备并享受使用它！
方法 4：软重置 Amazon Fire 平板电脑(Method 4: Soft Reset Amazon Fire Tablet)
有时，您的Amazon Fire 平板电脑(Amazon Fire Tablet)可能会遇到一些小问题，例如页面无响应、屏幕卡住或异常行为。您可以通过重新启动平板电脑来解决此类问题。软复位(Reset)通常称为标准重启过程，是最容易实现的。相同的步骤是：
1. 同时按住音量下(Volume Down )键和侧键(side button)，并保持一段时间。
2. 长按这两个按键，平板电脑屏幕变黑，出现亚马逊(Amazon)标志。看到徽标后松开按钮。
3、重启需要一段时间；等到您的平板电脑再次唤醒。
这些简单的步骤将重新启动您的Amazon Fire平板电脑并恢复其标准功能。
方法 5：使用正确的交流适配器(Method 5: Use the Correct AC Adapter)
Amazon Fire平板电脑和任何智能手机的 AC 适配器看起来都相似，因此它们被交换的可能性很大。有时，即使充电数小时后，您的平板电脑也无法开机。
在这种情况下，问题出在您使用的交流适配器上。
1. 使用正确的 AC 适配器充电，该适配器侧面有亚马逊(Amazon)标志。
2、充电器标准规格为5W、1A。确保使用具有此配置的适配器。
如果您确信自己使用的是合适的 AC 适配器，但平板电脑仍然无法开机；在这种情况下：
- 确保电缆正确插入；它既没有破裂也没有损坏。
- 确保(Make)电缆的末端没有断裂。
- 确保电缆的内部引脚未损坏。
- 确认USB端口的内部引脚处于正常状态。
提示：(Tip:)如果您的交流适配器和电缆处于良好的工作状态，但问题仍然存在，请尝试用新的交流适配器更换。
方法六：联系亚马逊服务(Method 6: Contact Amazon Service)
如果您已尝试本文中建议的所有方法，但此问题仍未解决，请尝试联系 亚马逊客户服务(Amazon Customer Service)寻求帮助。您可以更换或维修您的Amazon Fire平板电脑，具体取决于其保修和使用条款。
受到推崇的：(Recommended:)
我们希望本指南对您有所帮助，并且您能够修复Amazon Fire 平板电脑不会启动的(Amazon Fire Tablet won’t turn on )问题。让我们知道哪种方法最适合您。如果您对本文有任何疑问/评论，请随时将它们放在评论部分。
Amazon Fire Tablet Won't Turn On? Top 6 Ways to Fix it
Amazon Fіre Tablet is the go-to devicе for passing the time as it offers sеamlеss streaming оf your favorite shows & movies along with а vast array оf books. But, what do you do when you can’t enjoy either of these because your Amazon Fire tablet won’t turn on? There are several reasons for it to happen. When уou press thе Power button іn an incorrect manner, or there are some software isѕυes, then the Amаzon Fire tablet won’t turn ON. If you are also dealing with the same problem, you are at the right place. We bring a perfect guide that will help you fix the Amazon Fire tablet won’t turn ON issue. You must read till the very end to learn about the various tricks that will help you solve this problem.
How to Fix Amazon Fire Tablet Won’t Turn On
Here are some methods that will help you fix Amazon Fire tablet won’t turn on issue.
Method 1: Hold the Power Button
While handling the Amazon Fire tablet, the most frequent mistake made by users is that they leave the Power button after tapping it once. The correct way to turn it on is:
1. Hold the power button for at least 5 seconds.
2. After 5 seconds, you will hear a bootup sound, and the Amazon Fire tablet turns ON.
Method 2: Charge the Tablet using AC Adapter
When the Amazon Fire tablet has zero power or less than adequate charge left, it will enter into power saver mode. At this stage, the tablet will not have sufficient power to reboot itself and won’t turn on.
Note: Charge your device before you start with the troubleshooting steps.
1. Connect the Amazon Fire tablet to its AC adapter and leave it for a few hours (approximately 4 hours) to charge the battery to full.
Tip: It is suggested to hold the Power button for twenty seconds and ensure that it is turned OFF before charging. This will release the Amazon Fire tablet from the power save mode. Also, it will no longer be in sleep mode.
2. You will notice a green light next to the power port once the tablet gets enough power to reboot.
If the light does not switch from red to green, it indicates that your device is not getting charged at all. It may be a device issue, or you are not using the apt AC adapter for charging.
Also Read: 6 Things You should know Before You Buy an Amazon Fire TV Stick
Method 3: Software Update
Few minutes of inactivity will cause the Amazon Fire tablet to enter into sleep mode. Sometimes, a running application might prevent the tablet from exiting sleep mode. Some may think that the device is not turning ON, but the device may actually be asleep. If the software is not updated to the latest version, it can create this issue. To fix it, follow the given steps:
1. Hold the Power + Volume Up buttons for a minute. If the tablet is in sleep mode, it will be awake now.
2. Again, hold the Power + Volume Up buttons together until you see Installing the latest software prompt on the screen.
3. After the software update is complete, go for a soft reset explained in the next method.
Once done, restart your device and enjoy using it!
Method 4: Soft Reset Amazon Fire Tablet
Sometimes, your Amazon Fire Tablet might face minor issues like irresponsive pages, hang-on screens, or abnormal behavior. You can fix such issues by restarting your tablet. Soft Reset generally referred to as the standard restart process, is the easiest to implement. The steps for the same are:
1. Press the Volume Down and the side button simultaneously, and hold them for some time.
2. When you continuously hold these two buttons, your tablet screen turns black, and the Amazon logo appears. Release the buttons once you see the logo.
3. It takes a while to restart; wait till your tablet wakes up again.
These simple steps will restart your Amazon Fire tablet and resume its standard functionality.
Method 5: Use the Correct AC Adapter
The AC adapter for the Amazon Fire tablet and any smartphone looks similar, so there are high chances of these being swapped. Sometimes, your tablet will not turn ON even after hours of charging.
In this case, the problem lies in the AC adapter you are using.
1. Use the correct AC adapter, which has the Amazon logo on the side, for charging.
2. Standard specifications for the charger are 5W, 1A. Make sure you use an adapter with this configuration.
If you are confident that you are using a suitable AC adapter, but the tablet still does not turn ON; in this case:
- Ensure the cable is plugged correctly; it is neither cracked nor damaged.
- Make sure that the ends of the cable are not broken.
- Ensure that the internal pins of the cable are not damaged.
- Confirm that the internal pins of the USB port are in proper condition.
Tip: If your AC adapter and cable are in perfect working condition, and yet the issue persists, try replacing the AC adapter with a new one.
Method 6: Contact Amazon Service
If you have tried everything suggested in this article and yet this issue is not fixed, try contacting Amazon Customer Service for help. You may get your Amazon Fire tablet either replaced or repaired, depending on its warranty and the terms of use.
Recommended:
We hope that this guide was helpful and you were able to fix the Amazon Fire Tablet won’t turn on issue. Let us know which method worked for you best. If you have any queries/comments regarding this article, then feel free to drop them in the comments section.
