如果您尝试在 Windows 10 设备上使用USB端口，但遇到DRIVER_IRQL_NOT_LESS_OR_EQUAL (USBXHCI.sys) 蓝屏^{(Blue Screen)}死机^(Death)错误，那么这篇文章一定会对您有所帮助。USBXHCI.sys是USB设备正常运行所需的系统驱动程序。

修复 USBXHCI.sys 蓝屏错误

如果您遇到此问题，您可以尝试以下我们推荐的解决方案（不分先后顺序），看看是否有助于解决问题。

1. 运行蓝屏在线疑难解答^{(Blue Screen Online Troubleshooter)}
2. 重新安装 USB 驱动程序
3. 卸载USB xHCI 兼容主机控制器^{(USB xHCI Compliant Host Controller)}驱动程序
4. 扫描内存问题
5. 执行系统还原
6. 重置 Windows 10。

让我们看一下关于列出的每个解决方案所涉及的过程的描述。

如果能正常登录就好了；否则，您必须 启动进入安全模式^{(boot into Safe Mode)}，进入 高级启动选项屏幕^{(Advanced Startup options screen)}，或 使用安装媒体启动^{(use the Installation Media to boot)} 才能执行这些说明。

1]运行^(Run)蓝屏在线疑难解答^{(Blue Screen Online Troubleshooter)}

运行蓝屏在线疑难解答可能会修复USBXHCI.sys 蓝屏错误^{(USBXHCI.sys Blue Screen error)}。如果没有，请尝试下一个解决方案。

2]卸载^(Uninstall)并重新安装USB^{(Reinstall USB)}驱动程序

请执行下列操作：

• 按Windows key + R调用“运行”对话框。
• 在 Run 对话框中，键入devmgmt.msc并按 Enter打开 Device Manager^{(open Device Manager)}。
• 进入设备管理器^{(Device Manager)}后，向下滚动已安装设备列表
• 展开通用串行总线控制器^{(Universal Serial Bus Controller)} 部分。
• 右键单击USB 根集线器^{(USB Root Hub)} ，然后单击 卸载^(Uninstall)。
• 现在选中删除此设备的驱动程序软件^{(Delete the driver software for this device)}复选框。
• 点击卸载^(Uninstall)
• 卸载过程完成后重新启动 PC。

在启动时，Windows 10将重新安装USB驱动程序。

还是有同样的问题？尝试下一个解决方案。

3]卸载USB xHCI兼容主机控制器^{(Uninstall USB xHCI Compliant Host Controller)}驱动程序

请执行下列操作：

• 打开设备管理器。
• 进入设备管理器^{(Device Manager)}后，向下滚动已安装设备列表
• 展开通用串行总线控制器^{(Universal Serial Bus Controller)} 部分。
• 右键单击USB xHCI Compliant Host Controller并单击Uninstall。
• 现在，在出现提示时选中删除此设备的驱动程序软件^{(Delete the driver software for this device )}框。
• 点击卸载^(Uninstall)
• 卸载过程完成后重新启动 PC。

启动时，Windows 10将重新安装驱动程序。但是，您可能仍会收到错误消息。在这种情况下，您可以 通过设备管理器手动更新 USB xHCI 兼容主机控制器驱动程序^{(update the USB xHCI Compliant Host Controller drivers manually via the Device Manager)}，或者，如果可用，您可以在Windows 更新下^{(Windows Update)}的可选更新^{(get the driver updates on the Optional Updates)}部分获取驱动程序更新。您还可以自动更新驱动程序^{(automatically update the driver)}。

4]扫描内存问题

如果您添加了新的RAM棒，请将其移除并检查是否导致错误。如果没有，那么您需要运行内存测试^{(run a memory test)}。Windows将开始检查RAM中的异常情况。如果发现，您需要更换受影响的RAM。

5]执行系统还原

此时，如果上述解决方案都不适合您，您可以将系统恢复到较早的点。当系统正常工作时，这会将您的系统恢复到较早的时间点。

6]重置Windows 10

此解决方案要求您重置 Windows 10^{(reset Windows 10)}以确保您的数据得到保留，并查看是否有帮助。

希望这可以帮助！

Fix USBXHCI.sys Blue Screen error on Windows 10

If when you attempt tо use your USB ports on yoυr Windows 10 devіce, but you encountеr the DRIVER_IRQL_NOT_LESS_OR_EQUAL (USBXHCI.sys) Blue Screen of Death error, then this post is sure to help you. USBXHCI.sys is a system driver required for the proper functioning of USB devices.

Fix USBXHCI.sys Blue Screen error

If you’re faced with this issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.

1. Run the Blue Screen Online Troubleshooter
2. Reinstall USB drivers
3. Uninstall USB xHCI Compliant Host Controller driver
4. Scan for memory issues
5. Perform System Restore
6. Reset Windows 10.

Let’s take a look at the description of the process involved concerning each of the listed solutions.

If you can log in normally, good; else you will have to boot into Safe Mode, enter Advanced Startup options screen, or use the Installation Media to boot to be able to carry out these instructions.

1] Run the Blue Screen Online Troubleshooter

Running the Blue Screen Online Troubleshooter will likely fix the USBXHCI.sys Blue Screen error. If not, try the next solution.

2] Uninstall and Reinstall USB drivers

Do the following:

• Press Windows key + R to invoke the Run dialog.
• In the Run dialog box, type devmgmt.msc and hit Enter to open Device Manager.
• Once you’re inside Device Manager, scroll down through the list of installed devices
• Expand the Universal Serial Bus Controller section.
• Right-click on the USB Root Hub and click on Uninstall.
• Now check the box Delete the driver software for this device.
• Click on Uninstall
• Restart the PC when the uninstall process completes.

On boot, Windows 10 will reinstall the USB drivers.

Still, having the same issue? Try the next solution.

3] Uninstall USB xHCI Compliant Host Controller driver

Do the following:

• Open Device Manager.
• Once you’re inside Device Manager, scroll down through the list of installed devices
• Expand the Universal Serial Bus Controller section.
• Right-click on USB xHCI Compliant Host Controller and click Uninstall.
• Now check the box Delete the driver software for this device when prompted.
• Click on Uninstall
• Restart the PC when the uninstall process completes.

On boot, Windows 10 will reinstall the drivers. However, you may still receive the error. In which case, you can either update the USB xHCI Compliant Host Controller drivers manually via the Device Manager, or, if available, you can get the driver updates on the Optional Updates section under Windows Update. You may also automatically update the driver.

4] Scan for memory issues

If you added a new RAM stick, remove it and check if that is causing the error. If not, then you need to run a memory test. Windows will initiate checking for the abnormalities in RAM. If it finds any, you need to replace the affected RAM.

5] Perform System Restore

At this point, if none of the above solutions worked for you, you can restore your system to an earlier point. This will restore your system to an earlier point when the system was working correctly.

6] Reset Windows 10

This solution requires you to reset Windows 10 making sure your data is preserved, and see if that helps.

Hope this helps!

Related posts

• Fix 0xc0000142 Blue Screen error在Windows 10上

• Windows 10中的Fix Klif.sys Blue Screen error

• Fix intelppm.sys Blue Screen error在Windows 10

• Fix REFS_FILE_SYSTEM Blue Screen error在Windows 11/10上

• 在Windows 11/10 Fix EXFAT FILE SYSTEM（volmgr.sys）BSOD error

• Fix CRITICAL PROCESS DIED，0x000000EF错误Windows 11/10

• Fix Windows Update Error Code 0x8007025D-0x2000C

• Fix在Windows 10上Death error的Fix RTF64x64.SYS Blue Screen

• Death Fix SYSTEM_SERVICE_EXCEPTION（xxxx.sys）Fix SYSTEM_SERVICE_EXCEPTION（xxxx.sys误差

• Fix EFS FATAL ERROR Blue Screen error在Windows 10上

• Fix win32kfull.sys Blue Screen error在Windows 10

• Fix SYSTEM SERVICE EXCEPTION（asmtxhci。SYS）Blue Screen error

• 在Windows 10 SYSTEM_SERVICE_EXCEPTION（ks.sys）BSOD error

• Fix Ndu.sys BSOD error在Windows 10上

• Windows 10上的Fix RDR_FILE_SYSTEM Blue Screen

• Fix PAGE_FAULT_IN_NONPAGED_AREA 0x00000050错误

• Fix Storport.sys BSOD Windows 10上的错误

• SYSTEM THREAD EXCEPTION NOT HANDLED（ldiagio.sys）BSOD

• Fix SYSTEM LICENSE VIOLATION Blue Screen error在Windows 11/10上

• Windows 10中的Fix AKSFridge.sys Blue Screen error