修复 PAGE_FAULT_IN_NONPAGED_AREA 错误： ^{(Fix PAGE_FAULT_IN_NONPAGED_AREA Error: )}如果您面临PAGE_FAULT_IN_NONPAGED_AREA 错误^{(PAGE_FAULT_IN_NONPAGED_AREA Error)}和错误检查代码^{(Bug Check Code)}( BCCode ) 0x00000050的蓝屏^{(Blue Screen)}死机^(Death)( BSOD )，那么您可以放心地假设它是由于硬件故障、损坏的系统文件、病毒或恶意软件、防病毒软件引起的软件、有故障的RAM和损坏的NTFS卷（硬盘^(Hard)）。当在内存中找不到请求的数据时，会出现此停止消息，这意味着内存地址错误。

现在，为了防止损坏系统，PC 重新启动，您可以再次使用您的 PC。但是错误可能会随时出现，遵循相同的过程。因此，不要浪费任何时间，让我们看看如何在下面列出的故障排除指南的帮助下实际修复 PAGE_FAULT_IN_NONPAGED_AREA 错误。^{(Fix PAGE_FAULT_IN_NONPAGED_AREA Error)}

修复 PAGE_FAULT_IN_NONPAGED_AREA 错误^{(Fix PAGE_FAULT_IN_NONPAGED_AREA Error)}

确保 创建一个还原点^{(create a restore point)} 以防万一出现问题。

方法一：运行 SFC 和 CHKDSK^{(Method 1: Run SFC and CHKDSK)}

1.按Windows Key + X然后单击命令提示符（管理员）。^{(Command Prompt (Admin).)}

2.现在在cmd中输入以下内容并回车：

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

3.等待上述过程完成，完成后重新启动您的电脑。

4.接下来，从这里运行 CHKDSK  Fix File System Errors with Check Disk Utility(CHKDSK)。

5.让上述过程完成并再次重新启动您的 PC 以保存更改。

方法 2：将分页文件设置为自动^{(Method 2: Set Paging file to Automatic)}

1.右键单击这台电脑或我的电脑^(Computer)，然后选择属性。^{(Properties.)}

2.现在从左侧菜单中单击高级系统设置。^{( Advanced System Settings.)}

3.切换到高级选项卡^{(Advanced tab)}，然后单击性能下的设置。^{( Settings under Performance.)}

4.再次在“性能选项^(Options)”窗口下切换到“高级”选项卡。^{( Advanced tab.)}

5.单击虚拟内存下的^{(Virtual Memory.)}更改^(Change)按钮。

6.勾选 自动管理所有驱动器的页面文件大小。^{(Automatically manage paging file size for all drives.)}

7.单击确定^(OK)，然后单击应用，然后单击确定。

8.重新启动您的 PC 以保存更改，这应该 修复 PAGE_FAULT_IN_NONPAGED_AREA 错误。^{(Fix PAGE_FAULT_IN_NONPAGED_AREA Error.)}

方法 3：运行系统还原^{(Method 3: Run System Restore)}

1.按 Windows 键 + R 并输入“ sysdm.cpl ”然后回车。

2.选择系统保护^{(System Protection)}选项卡，然后选择系统还原。^{( System Restore.)}

3.单击下一步并选择所需的系统还原点^{(System Restore point)}。

4.按照屏幕提示完成系统还原。

5.重新启动后，您可能能够修复 PAGE_FAULT_IN_NONPAGED_AREA 错误。^{(Fix PAGE_FAULT_IN_NONPAGED_AREA Error.)}

Method 4: Run Memtest86+

注意：^(Note:)在开始之前，请确保您可以访问另一台 PC，因为您需要将Memtest86+下载并刻录到光盘或USB闪存驱动器。

1.将USB闪存驱动器连接到您的系统。

2.下载并安装Windows Memtest86  USB Key 自动安装程序^{(Windows Memtest86 Auto-installer for USB Key)}。

3.右键单击刚刚下载的图像文件，然后选择“在此处提取^{(Extract here)}”选项。

4.解压后，打开文件夹并运行Memtest86+ USB Installer。

5.选择您插入的USB驱动器来刻录MemTest86软件（这将格式化您的USB驱动器）。

6.完成上述过程后，将USB插入出现^(USB)PAGE_FAULT_IN_NONPAGED_AREA 错误^{( PAGE_FAULT_IN_NONPAGED_AREA Error.)}的 PC 。

7.重新启动您的 PC 并确保选择从USB闪存驱动器启动。

8.Memtest86 将开始测试系统中的内存损坏。

9.如果你通过了所有的测试，那么你可以确定你的记忆工作正常。

10.如果某些步骤不成功，Memtest86会发现内存损坏，这意味着您的“ PAGE_FAULT_IN_NONPAGED_AREA ”是由于内存损坏/损坏。

11.为了修复 PAGE_FAULT_IN_NONPAGED_AREA 错误^{( Fix PAGE_FAULT_IN_NONPAGED_AREA Error)}，如果发现坏内存扇区，您需要更换RAM 。

方法 5：运行驱动程序验证程序^{(Method 5: Run Driver Verifier)}

仅当您可以正常登录Windows时，此方法才有用，而不是在安全模式下。接下来，确保创建一个系统还原点。

 按顺序运行驱动程序验证程序^{(Driver Verifier)}修复 PAGE_FAULT_IN_NONPAGED_AREA 错误。^{(Fix PAGE_FAULT_IN_NONPAGED_AREA Error.)}这将消除可能发生此错误的任何冲突驱动程序问题。

方法6：运行自动修复^{(Method 6: Run Automatic Repair)}

1.插入Windows 10 可启动安装 DVD 或恢复光盘^{( Windows 10 bootable installation DVD or Recovery Disc)} 并重新启动您的 PC。

2.当提示Press any key to boot from CD or DVD时，按任意键^{(press any key)}继续。

3.选择您的语言首选项，然后单击下一步^(Next)。单击左下角的修复计算机。^{( Click Repair)}

4.在选择选项屏幕上，单击疑难解答。^{( Troubleshoot.)}

5.在疑难解答屏幕上，单击高级选项。^{(Advanced option.)}

6.在高级^(Advanced)选项屏幕上，单击自动修复或启动修复。^{( Automatic Repair or Startup Repair.)}

7.等待Windows Automatic/Startup Repairs完成。

8.重新启动以保存更改。

另外，请阅读如何修复自动修复无法修复您的 PC。^{(How to fix Automatic Repair couldn’t repair your PC.)}

为你推荐：^{(Recommended for you:)}

• 修复 Windows 无法在本地计算机上启动 Print Spooler 服务^{(Fix Windows could not start the Print Spooler service on local computer)}
• 修复 Windows 10 Creator 更新无法安装^{(Fix Windows 10 Creator Update fails to install)}
• 如何修复 KERNEL_DATA_INPAGE_ERROR^{(How To Fix KERNEL_DATA_INPAGE_ERROR)}
• 修复 CRITICAL_STRUCTURE_CORRUPTION 错误^{(Fix CRITICAL_STRUCTURE_CORRUPTION Error)}

就是这样，您已成功修复 PAGE_FAULT_IN_NONPAGED_AREA 错误^{(Fix PAGE_FAULT_IN_NONPAGED_AREA Error)}，但如果您对这篇文章仍有任何疑问，请随时在评论部分提出。

Fix PAGE_FAULT_IN_NONPAGED_AREA Error

Fix PAGE_FAULT_IN_NONPAGED_AREA Error: If you are facing the Blue Screen of Death (BSOD) with PAGE_FAULT_IN_NONPAGED_AREA Error and Bug Check Code (BCCode) 0x00000050 then you can safely assume that it is caused because of faulty hardware, corrupted system files, viruses or malware, antivirus software, faulty RAM and a corrupted NTFS volume (Hard disk). This stop message occurs when the requested data is not found in the memory which means the memory address is wrong.

Now to prevent damage to the system the PC is restarted and you can again use your PC. But the error can come anytime and again the same process is followed. So without wasting any time let’s see how to actually Fix PAGE_FAULT_IN_NONPAGED_AREA Error with the help of below-listed troubleshooting guide.

Fix PAGE_FAULT_IN_NONPAGED_AREA Error

Make sure to create a restore point just in case something goes wrong.

Method 1: Run SFC and CHKDSK

1.Press Windows Key + X then click on Command Prompt (Admin).

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

3.Wait for the above process to finish and once done restart your PC.

4.Next, run CHKDSK from here Fix File System Errors with Check Disk Utility(CHKDSK).

5.Let the above process complete and again reboot your PC to save changes.

Method 2: Set Paging file to Automatic

1.Right-click on This PC or My Computer and select Properties.

2.Now from the left-hand menu click on Advanced System Settings.

3.Switch to the Advanced tab and then click Settings under Performance.

4.Again under Performance Options window switch to Advanced tab.

5.Click Change button under Virtual Memory.

6.Checkmark Automatically manage paging file size for all drives.

7.Click OK then click Apply followed by OK.

8.Reboot your PC to save changes and this should Fix PAGE_FAULT_IN_NONPAGED_AREA Error.

Method 3: Run System Restore

1.Press Windows Key + R and type”sysdm.cpl” then hit enter.

2.Select System Protection tab and choose System Restore.

3.Click Next and choose the desired System Restore point.

4.Follow the on-screen instruction to complete system restore.

5.After reboot, you may be able to Fix PAGE_FAULT_IN_NONPAGED_AREA Error.

Method 4: Run Memtest86+

Note: Before starting, make sure you have access to another PC as you will need to download and burn Memtest86+ to the disc or USB flash drive.

1.Connect a USB flash drive to your system.

2.Download and install Windows Memtest86 Auto-installer for USB Key.

3.Right-click on the image file which you just downloaded and select “Extract here” option.

4.Once extracted, open the folder and run the Memtest86+ USB Installer.

5.Choose your plugged in USB drive to burn the MemTest86 software (This will format your USB drive).

6.Once the above process is finished, insert the USB to the PC which is giving the PAGE_FAULT_IN_NONPAGED_AREA Error.

7.Restart your PC and make sure that boot from the USB flash drive is selected.

8.Memtest86 will begin testing for memory corruption in your system.

9.If you have passed all the test then you can be sure that your memory is working correctly.

10.If some of the steps were unsuccessful then Memtest86 will find memory corruption which means that your “PAGE_FAULT_IN_NONPAGED_AREA” is because of bad/corrupt memory.

11.In order to Fix PAGE_FAULT_IN_NONPAGED_AREA Error, you will need to replace your RAM if bad memory sectors are found.

Method 5: Run Driver Verifier

This method is only useful if you can log into your Windows normally not in the safe mode. Next, make sure to create a System Restore point.

Run Driver Verifier in order Fix PAGE_FAULT_IN_NONPAGED_AREA Error. This would eliminate any conflicting driver issues due which this error can occur.

Method 6: Run Automatic Repair

1.Insert the Windows 10 bootable installation DVD or Recovery Disc and restart your PC.

2.When prompted to Press any key to boot from CD or DVD, press any key to continue.

3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.

4.On choose an option screen, click Troubleshoot.

5.On Troubleshoot screen, click Advanced option.

6.On the Advanced options screen, click Automatic Repair or Startup Repair.

7.Wait till the Windows Automatic/Startup Repairs complete.

8.Restart to save changes.

Also, read How to fix Automatic Repair couldn’t repair your PC.

Recommended for you:

• Fix Windows could not start the Print Spooler service on local computer
• Fix Windows 10 Creator Update fails to install
• How To Fix KERNEL_DATA_INPAGE_ERROR
• Fix CRITICAL_STRUCTURE_CORRUPTION Error

That’s it you have successfully Fix PAGE_FAULT_IN_NONPAGED_AREA Error but if you still have any questions regarding this post feel free to ask them in the comment’s section.

Related posts

• Fix Error 0X80010108在Windows 10中

• 如何Fix Application Error 0xc0000005

• Fix Windows Update Error Code 0x80072efe

• 如何Fix Application Load Error 5:0000065434

• Fix BAD_SYSTEM_CONFIG_INFO Error

• Fix Error 1603：安装过程中发生致命错误

• Fix Steam Application Load Error 3:0000065432

• 如何Fix Google Drive Access Denied Error

• Fix U-Verse Modem Gateway Authentication Failure Error

• 修复Windows无法Connect到此Network Error

• Fix Window Defender Error 0x800705b4

• Fix Developer Mode package无法安装Error code 0x80004005

• Fix Omegle Error Connecting至Server（2021）

• Fix Minecraft Error未能Write Core Dump

• Fix Windows Installer Access Denied Error

• Fix Windows Update Error 0x80080005

• 如何Fix Application Error 523

• 如何Fix Windows Update Error 80072ee2

• Fix Error 0x8007000e Preventing Backups

• Device Manager中的Fix Network Adapter Error Code 31