计算机上的小型和大型修改都可能引发错误。一个常见的蓝屏^{(Blue Screen)}错误是WHEA UNCORRECTABLE ERROR，系统遇到无法纠正的硬件^{(The system encountered an uncorrectable hardware)}错误，代码0x00000124。根据Windows 硬件错误体系结构^{(Windows Hardware Error Architecture)}( WHEA ) 提供的错误数据，此错误检查表明发生了致命的硬件错误。这可能是由RAM、硬盘驱动器^{(Hard Drive)}或任何其他硬件组件引起的。它通常与物理硬件故障有关。它可能与热量有关、有缺陷的硬件、内存，甚至是开始出现故障或已经出现故障的处理器。

WHEA_UNCORRECTABLE_ERROR 0x00000124蓝屏^(BSOD)

如果您收到此错误，则表示发生了硬件错误，并且您的 PC 已突然关闭以保护自己免受数据丢失。可以执行以下潜在修复来修复与Windows 10 上的错误代码STOP 0x00000124相关的^{(STOP 0x00000124)}BSOD错误-

1. 如果您启用了超频，请禁用它
2. 确保计算机的冷却系统正常工作
3. 运行诊断程序以检查内存
4. 更新或回滚驱动程序。
5. 使用系统文件检查器。
6. 禁用数字驱动程序签名强制^{(Digital Driver Signature Enforcement)}。

如果您通常倾向于创建系统还原点^{(System Restore)}，您可以尝试通过 执行系统还原来撤消计算机上的任何修改。其次，建议您 仅在带网络的安全模式下^{(Safe Mode with Networking)}执行下面提到的这些任务 。

1]如果您启用了超频，请禁用它^(Disable)

如果超频已启用，请尝试禁用它。这应该会有所帮助。

2]确保您的计算机的冷却系统正常工作

您需要打开硬件并检查计算机的冷却系统（如风扇等）是否正常工作。

3]运行系统诊断

运行Windows 内存诊断工具^{(Windows Memory Diagnostics Tool)}以确认系统内存没有缺陷。

4]更新或回滚驱动程序

驱动程序导致硬件故障的可能性较小，但可能。因此，如果您最近更新了驱动程序，请回滚。如果您使用的是旧设备驱动程序，请查看是否有可用更新。如果需要，卸载然后重新安装驱动程序，其名称可能已在蓝屏^{(Blue Screen)}中提及。这篇文章将向您展示如何更新或回滚驱动程序。

例如，如果它是sisraid4.sys驱动程序，那么由于它是Windows系统驱动程序，您也可以运行系统文件检查器^{(System File Checker)}。sisraid4.sys是SiS AHCI Stor-Miniport 驱动程序^{(SiS AHCI Stor-Miniport Driver)}，由Microsoft Windows进行数字签名。

5]运行系统文件检查器

运行命令提示符（管理员）^{(Run Command Prompt (Admin))}，键入以下命令以 运行系统文件检查器，然后按 Enter。

sfc /scannow

扫描完成后重新启动系统。

这将修复系统文件的所有不良或损坏集合。

6]禁用数字驱动程序签名强制^{(Disable Digital Driver Signature Enforcement)}

首先^(Start)从“开始”菜单重新启动计算机，然后在按下^(Start)Shift键的同时选择选项。

它将调出Advanced Boot Menu。单击^(Click)疑难解答^{(Troubleshoot. )}。 现在，选择 启动设置。^{(Startup Settings.)}

最后，选择“ 禁用驱动程序签名强制^{(Disable driver signature enforcement)}”选项。^{(Disable driver signature enforcement.)}

正常启动^(Boot)计算机。检查是否可以解决您的问题。

All the best!

WHEA_UNCORRECTABLE_ERROR, 0x00000124 BSOD [Fixed]

Both small and largе modifications on a computer can trigger errors. Оne cоmmonly faced Βlue Screen error is WHEA UNCORRECTABLE ERROR, The system encountered an uncorrectable hardware error, Code 0x00000124. Based on the error data that is provided by the Windows Hardware Error Architecture (WHEA), this bug check indicates that a fatal hardware error has occurred. It could be caused due to the RAM, Hard Drive, or any other hardware component. It is typically related to physical hardware failures. It can be heat related, defective hardware, memory, or even a processor that is beginning to fail or has failed.

WHEA_UNCORRECTABLE_ERROR 0x00000124 BSOD

If you receive this error, it means that a hardware error has occurred and that your PC has shut down suddenly to protect itself from data loss. The following potential fixes can be carried out to fix BSOD errors related to error code STOP 0x00000124 on Windows 10-

1. Disable Overclocking if you have enabled it
2. Ensure that your computer’s cooling systems are working
3. Run Diagnostics to check the Memory
4. Update or Rollback Drivers.
5. Using System File Checker.
6. Disable Digital Driver Signature Enforcement.

If you tend to create a System Restore point usually, you can try to undo any modifications on your computer, by performing System Restore. Secondly, it is recommended that you carry out these tasks mentioned below in Safe Mode with Networking only.

1] Disable Overclocking if you have enabled it

If Overclocking has been enabled, try disabling it. This should help.

2] Ensure that your computer’s cooling systems are working

You need to get your hardware opened and checked if the computer’s cooling systems like fans, etc., are working normally.

3] Run system diagnostics

Run Windows Memory Diagnostics Tool to confirm that the system memory is not defective.

4] Update or Rollback Driver

It is less likely, but possible that a driver is causing the hardware to fail. So, if you recently updated a driver, rollback. If you are using an old device driver, see if updates are available. If need be, uninstall and then fresh install the driver, whose name may have been mentioned in the Blue Screen. This post will show you how to Update or Rollback drivers.

For instance, if it is the sisraid4.sys driver then since it is a Windows system driver, you may run System File Checker as well. sisraid4.sys is SiS AHCI Stor-Miniport Driver and is digitally signed by Microsoft Windows.

5] Run System File Checker

Run Command Prompt (Admin), type in the following command to run System File Checker, and then hit Enter.

sfc /scannow

Restart your system after the scan is completed.

This will fix all the bad or damaged collections of your system files.

6] Disable Digital Driver Signature Enforcement

Start by rebooting your computer from the Start menu and selecting the option while you press the Shift key.

It will bring up the Advanced Boot Menu. Click on Troubleshoot. Now, select Startup Settings.

Finally, select the option that says Disable driver signature enforcement.

Boot your computer normally. Check if that fixes your issues.

All the best!

Related posts

• SYSTEM THREAD EXCEPTION NOT HANDLED（ldiagio.sys）BSOD

• 在Windows 10 SYSTEM_SERVICE_EXCEPTION（ks.sys）BSOD error

• 在Windows 11/10 Fix EXFAT FILE SYSTEM（volmgr.sys）BSOD error

• DRIVER_VERIFIER_DETECTED_VIOLATION BSOD error在Windows 10

• Fix ndis.sys Windows 10上的BSOD error

• IRQL_NOT_DISPATCH_LEVEL 0x00000008 Blue Screen Error

• Windows 11/10 Fix hardlock.sys Blue Screen Death error

• 如何在Windows 11/10修复Death的Orange Screen

• Fix PFN_LIST_CORRUPT error在Windows 11/10上

• 您的电脑遇到了问题，需要重新启动

• Fix 0xc0000135 Blue Screen error在Windows 10

• Windows 11/10 Fix Reference Pointer BSOD

• Windows 11/10中的DPC_WATCHDOG_VIOLATION Blue Screen

• Fix Ntfs.sys上Windows 10失败BSOD Error

• DRIVER_VERIFIER_IOMANAGER_VIOLATION error在Windows 10

• Fix 0xc0000142 Blue Screen error在Windows 10上

• DRIVER_IRQL_NOT_LESS_OR_EQUAL（kbdclass.sys）BSOD error

• Fix Storport.sys BSOD Windows 10上的错误

• Fix Windows Update Error Code 0x8007025D-0x2000C

• Fix MSRPC STATE VIOLATION Blue Screen error在Windows 11/10上