修复罗技无线鼠标不工作：(Fix Logitech Wireless Mouse Not Working:) 如果您的罗技无线鼠标(Logitech Wireless Mouse)不工作或无法连接，这可能是因为驱动程序损坏或不兼容、电池电量不足、未连接到正确的USB 端口(USB Port)等。如果您有笔记本电脑，那么您知道怎么做使用触摸板在 PC 上导航可能很困难，因此我们大多数人使用无线鼠标(Mouse)来解决这个问题。罗技(Logitech)鼠标未连接或未检测到的问题可能很烦人，因此我们创建了本指南来解决您在使用无线鼠标时遇到的任何问题。
您可能需要解决几个问题才能解决此问题。有时，当您将 Windows 10 更新到较新的版本时，旧驱动程序变得不兼容，有时问题可能只是因为无线鼠标内的电池可能没电等。现在您看到可能有多种原因，所以不要浪费随时让我们在下面列出的故障排除指南的帮助下查看如何修复 Logitech 无线鼠标不工作问题。( Fix Logitech Wireless Mouse Not Working issue)
修复罗技无线鼠标(Fix Logitech Wireless Mouse)不工作
确保 创建一个还原点(create a restore point) 以防万一出现问题。
方法 1：从无线鼠标中取出电池(Method 1: Remove the Batteries from the Wireless Mouse)
我们建议取出电池和无线鼠标接收器，然后等待几秒钟让设备放电。此方法称为硬重置(Hard Reset)，大多数情况下可以解决问题。几秒钟后，再次插入电池并将接收器连接回 PC，然后检查您是否能够使用罗技无线鼠标(Logitech Wireless Mouse)。
方法二：更换电池(Method 2: Replace the Batteries)
如果无线鼠标内部的电池已经没电了，那么无论您进行何种故障排除，您都将无法使用无线鼠标。因此，即使您认为电池没问题，也只需购买一对新电池并用鼠标中的旧电池更换即可。
无线(Wireless)鼠标需要适度的电量才能与 PC 建立无线连接，有时鼠标似乎消耗的电量比平均电量要多，这可能会削弱电池的电量。如果电池电量不足，那么无线连接也会很弱，看起来鼠标工作不正常，但实际上鼠标很好。
方法 3：尝试更换 USB 鼠标并使用鼠标垫(Method 3: Try to Change the USB Mouse & use Mousepad)
如果连接鼠标接收器的USB 端口(USB port)损坏，那么无论您做什么鼠标都无法工作。所以尝试将接收器连接到另一个USB 端口(USB Port)，看看是否能解决问题。
这个问题的另一个解决方案是使用鼠标垫(Mousepad)，因为鼠标不能在粗糙的表面上工作。如果您没有鼠标垫(Mousepad)，请尝试在不同的表面上使用鼠标。此外，请确保远离任何可能干扰无线鼠标和接收器连接的电器。
方法 4：更新鼠标驱动程序(Method 4: Update Mouse Drivers)
1.按 Windows 键 + R 然后键入“ devmgmt.msc ”并按Enter打开设备管理器(Device Manager)。
2.展开鼠标(Mice)和其他指针设备，然后右键单击您的罗技鼠标(Logitech Mouse)并选择更新驱动程序。(Update Driver.)
3.在下一个屏幕上单击“浏览我的计算机以获取驱动程序软件。(Browse my computer for driver software.)“
4.单击“让我从计算机上的设备驱动程序列表中选择(Let me pick from a list of device drivers on my computer)”。
5.选择合适的驱动，点击下一步( Next)进行安装。
6.重新启动您的电脑以保存更改，看看您是否能够修复罗技(Logitech)无线鼠标不工作的问题。
7.如果您仍然遇到问题，请在选择驱动程序页面上（再次按照 1-4 的步骤），选择“ PS/2 Compatible Mouse ”驱动程序并单击下一步。(Next.)
注意：(Note:)如果您找不到PS/2 Compatible Mouse驱动程序，请取消选中(uncheck)“显示兼容硬件(Show compatible hardware)”。
8.重新启动您的电脑，看看您是否能够修复罗技无线鼠标在 Windows 10 中不工作的问题。(Fix Logitech Wireless Mouse Not Working in Windows 10.)
方法 5：重新安装鼠标驱动程序(Method 5: Reinstall Mouse Drivers)
1.按 Windows 键 + R 然后键入devmgmt.msc并按 Enter。
2.展开鼠标(Mice)和其他指针设备，然后右键单击您的罗技(Logitech)鼠标并选择卸载。(Uninstall.)
3.重新启动您的 PC 以保存更改，Windows将自动为您的设备安装默认驱动程序。
方法六：重置罗技无线鼠标(Method 6: Reset Logitech Wireless Mouse)
1. 将USB 接收器(USB Receiver)连接到 PC 并确保已打开鼠标电源。( power on the Mouse.)
2.将鼠标底部(power switch at the bottom of the mouse to ON position)的电源开关滑到ON位置。
3.再次翻转鼠标，在鼠标底部，你会发现一个重置按钮。(find a reset button.)
4.按住重置按钮5-6秒重置鼠标。
5.这将刷新无线连接并修复罗技无线鼠标不工作的问题。( Fix Logitech wireless mouse not working issue.)
方法 7：在另一台 PC 上试用罗技无线鼠标(Method 7: Try Logitech Wireless Mouse on another PC)
如果按照上述所有步骤操作后，您仍然无法修复罗技(Logitech)无线鼠标无法正常工作的问题，那么鼠标可能有故障。为了测试这个理论，请在另一台 PC 上尝试您的鼠标，如果鼠标正常工作，则该设备工作正常，问题仅出在您的 PC 上。但是如果鼠标不工作，那么你的鼠标可能已经死了，你需要用一个新的来替换它。
受到推崇的：(Recommended:)
我希望上述步骤对您有所帮助，现在您将能够修复 Logitech Wireless Mouse Not Working(Fix Logitech Wireless Mouse Not Working)问题，但如果您对本文仍有任何疑问，请随时在评论部分提出。
Fix Logitech Wireless Mouse Not Working
Fix Logitech Wireless Mouse Not Working: If your Logitech Wireless Mouse is not working or connecting then this might be because of corrupted or incompatible drivers, low battery, not connected to the right USB Port, etc. If you have a laptop then you know how difficult it can be to navigate around the PC using the touchpad, so most of us use Wireless Mouse to get around this problem. Logitech mouse not connecting or not detected issue can quite annoying and therefore we have created this guide to resolve any issues you face with the wireless mouse.
There can be several issues that you need to addressed to resolve this problem. Sometimes when you update Windows 10 to a newer build, the old drivers become incompatible, sometimes the issue can only be because of the batteries inside your wireless mouse might be dead, etc. Now as you see there can be several causes, so without wasting any time let’s see How to Fix Logitech Wireless Mouse Not Working issue with the help of the below-listed troubleshooting guide.
Fix Logitech Wireless Mouse Not Working
Make sure to create a restore point just in case something goes wrong.
Method 1: Remove the Batteries from the Wireless Mouse
We recommend removing the batteries and wireless mouse receiver then wait for few seconds to allow the device to discharge. This method is known as Hard Reset and most of the time this fixes the issue. After a few seconds, again insert the batteries and connect the receiver back to the PC then check if you’re able to use Logitech Wireless Mouse or not.
Method 2: Replace the Batteries
If the batteries inside the wireless mouse are already dead then no matter what kind of troubleshooting you do, you won’t be able to use the wireless mouse. So even if you think the batteries are okay, just buy a new pair of batteries and replace them with the old ones in your mouse.
Wireless mouse requires a moderate amount of power to establish the wireless connection with the PC and sometimes the mouse seems to drain more battery than the average which might weaken the power of batteries. If the battery is weak then the wireless connection would also be weak and it would seem that the mouse is not working correctly but in reality the mouse is fine.
Method 3: Try to Change the USB Mouse & use Mousepad
If the USB port to which the mouse receiver is connected is damaged then the mouse won’t work no matter what you do. So try to connect the receiver to another USB Port and see if this fixes the issue.
Another Solution to this problem is using Mousepad as a mouse can’t work on rough surfaces. If you don’t have a Mousepad then try to use the mouse on different surfaces. Also, make sure to keep away any electrical appliances that might interfere with the wireless mouse and the receiver connection.
Method 4: Update Mouse Drivers
1.Press Windows Key + R then type “devmgmt.msc” and hit Enter to open Device Manager.
2.Expand Mice and other pointing devices then right-click your Logitech Mouse and select Update Driver.
3.On the next screen click on “Browse my computer for driver software.“
4.Click “Let me pick from a list of device drivers on my computer“.
5.Select the appropriate driver and click Next to install it.
6.Reboot your PC to save changes and see if you’re able fix Logitech wireless mouse not working issue.
7.If you are still facing the issue then on the select driver page (again follow the steps from 1-4), select “PS/2 Compatible Mouse” driver and click Next.
Note: If you can’t find PS/2 Compatible Mouse drivers then uncheck “Show compatible hardware“.
8.Restart your PC and see if you’re able to Fix Logitech Wireless Mouse Not Working in Windows 10.
Method 5: Reinstall Mouse Drivers
1.Press Windows Key + R then type devmgmt.msc and hit Enter.
2.Expand Mice and other pointing devices then right-click your Logitech mouse and select Uninstall.
3.Reboot your PC to save changes and Windows will automatically install the default drivers for your device.
Method 6: Reset Logitech Wireless Mouse
1.Connect the USB Receiver to the PC and make sure to power on the Mouse.
2.Slide the power switch at the bottom of the mouse to ON position.
3.Again flip the mouse and at the bottom of the mouse, you will find a reset button.
4.Hold down the reset button for 5-6 seconds to reset the mouse.
5.This will refresh the wireless connection and will Fix Logitech wireless mouse not working issue.
Method 7: Try Logitech Wireless Mouse on another PC
If after following all the above steps, you are still not able to fix Logitech wireless mouse not working issue then chances are the mouse might be faulty. And to test this theory, try your mouse on another PC, if the mouse works then the device is working properly and the issue is with your PC only. But if the mouse does not work then your mouse might be dead and you need to replace it with a new one.
Recommended:
I hope the above steps were helpful and now you will be able to Fix Logitech Wireless Mouse Not Working issue, but if you still have any questions regarding this article then please feel free to ask them in the comment section.
