Windows 11/10创建新的本地管理员帐户，您必须首先使用管理员或具有管理权限的普通用户登录 Windows 。但是，有时您可能由于某种原因无法登录 Windows^{(unable to sign in to Windows for some reason)}，例如忘记密码、 失去管理员权限或其他一些错误。在这篇文章中，我们将向您展示在您无法登录时创建本地管理员帐户的方法。

^{(Create Local Administrator Account)}使用CMD创建本地管理员帐户

由于您无法登录Windows 11/10并进入桌面，因此您无法在Windows 11/10打开命令提示符。但是，您可以借助Windows 11/10安装媒体从“高级启动选项”屏幕或“登录”屏幕启动^{(Advanced Startup Options)}CMD提示。

Windows 11/10上的命令提示符^{(Command Prompt)}创建本地管理员帐户，请执行以下操作：

• 从 Windows 安装媒体启动您的计算机^{(Boot your computer from a Windows installation media)}。
• 当Windows 设置^{(Windows Setup)}屏幕出现时，按 Shift + F10打开命令提示符。
• 在CMD窗口中，一个接一个地运行下面的命令（在每一行上按Enter ），将^(Enter)utilman.exe文件替换为 cmd.exe 文件。

注意：^(Note:) C 是系统盘符。

move c:\windows\system32\utilman.exe c:\

copy c:\windows\system32\cmd.exe c:\windows\system32\utilman.exe

• 现在，运行 wpeutil reboot以重新启动计算机并断开Windows安装介质。

在断开安装媒体的情况下，您的计算机将正常重新启动。当您到达Windows登录屏幕时，单击屏幕右下角的“轻松访问”^{(Ease of Access)}图标。如果前面的步骤正确，这将打开命令提示符。

• 现在。您可以通过依次运行以下两个命令行来为Windows 10创建一个新的管理员帐户。将UserName占位符替换为您想要的用户名。

net user UserName /add

net localgroup administrators UserName /add

几秒钟后，新创建的管理员帐户将显示在登录屏幕的左下角，您可以使用它登录Windows 11/10。

阅读：^(Read:) 如何在 Windows 中以管理员身份登录

现在，在您成功创建管理员帐户后，您应该恢复 utilman.exe文件。如果没有，您将无法在Windows 11/10 登录屏幕上使用^(Windows)实用程序管理器^{(Utility Manager)}（轻松^(Ease)访问），另一方面，其他人可能会使用命令提示符更改您的Windows管理员密码或使对您的计算机进行的其他更改。要恢复 utilman.exe 文件，请执行以下操作：

• ^(Boot)再次从Windows^(Windows)安装媒体启动您的计算机。
• 出现Windows 设置^{(Windows Setup)}屏幕时，按Shift + F10打开命令提示符。
• 键入下面的命令，然后按 Enter^(Enter)。

move c:\utilman.exe c:\windows\system32\utilman.exe

• 当Overwrite c:\windows\system32\utilman.exe?出现提示时，键入Yes Â，然后按 Enter。
• 取出安装介质并重新启动计算机。

进入登录屏幕后，您将看到新创建的管理员帐户——您可以单击该帐户登录您的 Windows 10 设备。

当您无法登录时，这就是在Windows 11/10上创建本地管理员帐户^{(Administrator Account)}的两种方法！

相关帖子^{(Related post)}：在 Windows 中创建隐藏的管理员用户帐户。

Create Local Administrator Account on Windows 11/10 using CMD

Generally, to creatе a new locаl administrator account for Windows 11/10, you must first sign in to Windows with an administrator or a regular user with аdministrative rights. However, occasionally, you may be unable to sign in to Windows for some reason, such as forgetting your password, losing administrator rights, or some other errors. In this post, we will show you the way to create a Local Administrator Account when you can’t sign in.

Create Local Administrator Account using CMD

Since you can’t sign in to Windows 11/10 and get to the desktop, you can’t open Command Prompt within Windows 11/10. However, you can fire up the CMD prompt from the Advanced Startup Options screen or the Sign-in screen with the aid of a Windows 11/10 installation media.

So, to create a local administrator account via Command Prompt on Windows 11/10 when you can’t sign in, do the following:

• Boot your computer from a Windows installation media.
• When the Windows Setup screen appears, press Shift + F10 to open command prompt.
• In the CMD window, run the commands below one after the other (hit Enter on each line) to replace the utilman.exe file with the cmd.exe file.

Note: C is the system drive letter.

move c:\windows\system32\utilman.exe c:\

copy c:\windows\system32\cmd.exe c:\windows\system32\utilman.exe

• Now, run wpeutil reboot to restart the computer and disconnect the Windows installation media.

With the installation media disconnected, your computer will restart normally. When you reach the Windows sign-in screen, click the Ease of Access icon in the lower right corner of the screen. This will open a command prompt if the previous steps went right.

• Now. you can create a new administrator account for Windows 10 by running the following two command lines one after the other. Replace UserName placeholder with the user name you want.

net user UserName /add

net localgroup administrators UserName /add

After a few seconds, the newly created administrator account will be displayed in the lower-left corner of the sign-in screen and you can use it to sign in to Windows 11/10.

Read: How to login as an Administrator in Windows

Now, after you have successfully created the administrator account, you should restore the utilman.exe file. If not, you won’t be able to use the Utility Manager (Ease of access) on Windows 11/10 sign-in screen, and on the other hand, others might use the command prompt to change your Windows admin password or make other changes to your computer. To restore the utilman.exe file, do the following:

• Boot your computer from the Windows installation media again.
• When the Windows Setup screen appears, press Shift + F10 to open the command prompt.
• Type the command below and hit Enter.

move c:\utilman.exe c:\windows\system32\utilman.exe

• When the Overwrite c:\windows\system32\utilman.exe? prompt appears, type Yes and hit Enter.
• Remove the installation media and restart the computer.

Once you get to the sign-in screen, you will see the newly created administrator account – you can click on the account to sign in to your Windows 10 device.

And that’s it on the two ways to create a Local Administrator Account on Windows 11/10 when you can’t sign in!

Related post: Create Hidden Administrator User Account In Windows.

Related posts

• Windows 11/10中的Create desktop Switch User Accounts的快捷方式

• 如何在Windows 10中删除内置Administrator Account

• 如何在Windows 10中使用PowerShell创建Local User Account

• 如何启用或内置Administrator account在Windows 10 Disable

• 如何在Windows 10中创建本地Administrator Account

• 如何在Windows 10中恢复已删除的User account配置文件

• Local，LocalLow，在AppData上Windows 10漫游文件夹

• 如何在Windows 10中Access Denied Restricted Folder

• Windows 10自动Delete旧用户配置文件和文件

• 如何在Windows 10上更改CMD中的Directory

• 如何在Windows 11/10中更改File and Folder permissions

• 如何检查您是否在Windows 10上有Admin

• 如何User Account picture更改为Windows 10视频

• 如何在Windows 11/10中运行Command Prompt作为Administrator

• 如何在Windows 10中注销其他用户

• Windows 10 login screen缺少Switch User Option

• 如何在Windows 10中从login screen中删除已删除的User Account

• 如何在Windows 10中的文件夹中打开Command Prompt

• 如何检查一个过程是否在Windows 10中运行Administrator

• 使用本地帐户登录，而是在Windows 10中缺少选项