当您将新显示器连接到您的 PC 时,您可能会收到由于未能检测到该显示器而导致的一般PnP显示器错误。(PnP)从Windows 10(Windows 10)升级到Windows 11后也会发生这种情况。在大多数情况下,此问题与驱动程序有关,但也可能是由硬件或电缆问题引起的。
在本文中,我们将探讨解决通用PnP显示器驱动程序问题的几种方法。请注意,您可以在Windows 10(Windows 10)和 11上应用我们的修复。
什么是通用 PnP 监视器
PnP代表即插即用(Plug)。_ _ (Play)这就是使您的计算机系统能够自动适应您所做的许多硬件更改的原因。每当您连接显示器或任何其他外部设备时,Windows都会为您配置它。
在大多数情况下,您不必手动安装任何驱动程序(install any drivers),这要归功于PnP系统。但有时,通用PnP监视器驱动程序无法正常工作,并导致连接问题。
什么触发了通用 PnP 监视器驱动程序错误(What Triggers the Generic PnP Monitor Driver Error)
- HDMI(Bad HDMI)、DVI、DisplayPort或VGA显示器电缆损坏。
- 监视器有缺陷。
- 显示器未正确连接到 PC。
- 损坏的驱动程序。
现在您已经了解导致此与监视器相关的错误的原因,请按照以下步骤进行修复。
1. 检查电缆连接
在开始删除和重新安装驱动程序之前,请进行基本的硬件检查。您的显示器电缆是否正确连接?拔下并重新插入。如果您仍在使用VGA电缆,请确保它已牢固插入并且小螺钉已拧紧。
接下来,确保此问题不是特定于系统的。将您的显示器连接到不同的 PC 或笔记本电脑。如果您在另一个系统上遇到同样的问题,则说明显示器(something wrong with the monitor)或电缆有问题。尝试使用不同的电缆以排除电缆故障的可能性。
2. 更新通用 PnP 显示器驱动程序(Generic PnP Monitor Driver)
右键单击(Right-click)Windows开始按钮并打开设备管理器(Device Manager)。
在Monitors(Monitors)下找到Generic PnP Monitor。右键单击并从菜单中选择更新驱动程序。(Update driver)
将打开一个新窗口,询问您驱动程序的来源。选择自动搜索驱动程序(Search automatically for drivers)选项并按照说明进行操作。
如果您正在运行多显示器设置(multi-monitor setup),您应该更新每个显示器的通用 PnP 显示器(Generic PnP Monitor)驱动程序。然后,在更新驱动程序后重新启动计算机。
3.删除(Remove)并重新安装(Reinstall)通用PnP 显示器驱动程序(Generic PnP Monitor Driver)
在某些情况下,更新驱动程序并不能解决通用 PnP(Generic PnP)显示器驱动程序问题,但重新安装它会有所帮助。卸载驱动程序后,Windows将自动检测连接的显示器并安装其驱动程序。请按照以下步骤尝试此修复。
返回设备管理器(Device Manager)并右键单击通用 PnP 监视器。(Generic PnP Monitor.)
从菜单中选择卸载设备(Uninstall device)选项。
将弹出一个新窗口。选择卸载(Uninstall)按钮以删除驱动程序。
接下来,选择设备管理器(Device Manager)窗口顶部的操作,然后选择(Action)扫描硬件更改(Scan for hardware changes)。
确保(Make)在单击“操作”(Action)按钮时选择了通用PnP 监视器驱动程序。(PnP Monitor)否则,您将找不到扫描硬件更改的选项。您也可以右键单击驱动程序并选择相同的选项。
最后,重新启动您的计算机,您的显示器应该可以工作,除非其他原因导致错误。
4. 更新计算机的显示(Display)适配器
Generic PnP Monitor驱动程序并不总是导致实际错误的原因。有时显示适配器(display adapters)是问题,因此请确保它们是最新的。
打开设备管理器(Device Manager)并展开显示适配器(Display adapters)。
选择您的显示适配器,右键单击,然后选择更新驱动程序(Update Driver)。
接下来将打开驱动程序更新窗口。只需(Simply)选择自动搜索驱动程序的选项,按照说明进行操作,然后重新启动计算机。
5. 执行系统文件检查
如果您仍然收到Generic PnP Monitor驱动程序错误,请运行Windows 系统文件检查器(System File Checker)。这是一个故障排除程序,可自动检测并修复损坏的系统文件。以下是您需要遵循的步骤。
在Windows搜索框中键入cmd以启动命令提示符(Command Prompt)应用程序。确保以管理员身份运行它;否则,您将无法执行系统文件检查。
键入以下命令并按Enter:
sfc /scannow
该实用程序将扫描所有Windows系统文件以查找错误或丢失文件。这可能需要一段时间,所以请耐心等待。重新启动计算机,您的Generic PnP Monitor驱动程序错误应该不会再出现了。
保持你的电脑更新
此外,请记住Windows更新可以解决许多问题,因为驱动程序也会获得更新。因此,也要检查是否有任何待处理的更新。
哪种解决方案适合您?你(Did)找到另一个修复了吗?在下面的评论中让我们知道!
5 Fixes for Generic PNP Monitor Driver Error in Windows 11/10
When уou connect a new monitor to your PC, you might get a generic PnP monіtor error resulting from failure to detect that mоnitor. This can also happen after upgrading from Wіndows 10 to Windows 11. In most cases, this problem is driver-related, but it can also be caused by hardware or cable issues.
In this article, we’re going to explore several methods of fixing generic PnP monitor driver issues. Take note you can apply our fixes on both Windows 10 and 11.
What is Generic PnP Monitor
PnP stands for Plug and Play. This is what allows your computer system to automatically adapt to many of the hardware changes you make. Whenever you connect a monitor or any other external device, Windows should configure it for you.
In most cases, you don’t have to manually install any drivers, thanks to the PnP system. But sometimes, the generic PnP monitor driver doesn’t work as it should, and it causes connectivity issues.
What Triggers the Generic PnP Monitor Driver Error
- Bad HDMI, DVI, DisplayPort, or VGA monitor cable.
- Defective monitor.
- The monitor is not connected correctly to the PC.
- Corrupted driver.
Now that you have an idea about what causes this monitor-related error, follow the steps below to fix it.
1. Check the Cable Connection
Before you start removing and reinstalling drivers, do a basic hardware checkup. Is your monitor cable properly connected? Unplug it and replug it. If you’re still using a VGA cable, make sure it’s firmly plugged in and the little screws are tightened.
Next, make sure this problem isn’t system-specific. Connect your monitor to a different PC or a laptop. If you have the same issue on another system, there’s something wrong with the monitor or cable. Try a different cable to rule out the possibility of a faulty cable.
2. Update the Generic PnP Monitor Driver
Right-click the Windows start button and open the Device Manager.
Locate Generic PnP Monitor under Monitors. Right-click and select Update driver from the menu.
A new window will open that will ask you for the source of the drivers. Select the Search automatically for drivers option and follow the steps as instructed.
If you’re running a multi-monitor setup, you should update the Generic PnP Monitor driver for each monitor. Then, restart your computer once the driver has been updated.
3. Remove and Reinstall the Generic PnP Monitor Driver
In some cases, updating the driver doesn’t fix the Generic PnP monitor driver issue but reinstalling it helps. Once you uninstall the driver, Windows will automatically detect the connected monitor and install its drivers. Follow the steps below to try this fix.
Go back to the Device Manager and right-click on the Generic PnP Monitor.
Select the Uninstall device option from the menu.
A new window will pop up. Select the Uninstall button to remove the driver.
Next, select Action at the top of the Device Manager window and select Scan for hardware changes.
Make sure your Generic PnP Monitor driver is selected when you click on the Action button. Otherwise, you won’t find the option to scan for hardware changes. You can also right-click on the driver and select the same option.
Finally, restart your computer, and your monitor should work unless something else is causing the error.
4. Update Your Computer’s Display Adapters
The Generic PnP Monitor driver isn’t always what causes the actual error. Sometimes the display adapters are the issue, so make sure they’re up to date.
Open the Device Manager and expand Display adapters.
Select your display adapter(s), right-click, and select Update Driver.
The driver update window will open next. Simply select the option to search automatically for the driver, follow the instructions, and restart your computer.
5. Perform a System Files Check
If you’re still getting a Generic PnP Monitor driver error, run the Windows System File Checker. It’s a troubleshooting program that automatically detects and fixes corrupt system files. Here are the steps you need to follow.
Type cmd in the Windows search box to launch the Command Prompt app. Make sure you run it as the administrator; otherwise, you won’t be able to perform the system files check.
Type the following command and press Enter:
sfc /scannow
The utility will scan all Windows system files for errors or missing files. It can take a while, so be patient. Restart your computer, and your Generic PnP Monitor driver error should be no more.
Keep Your PC Updated
Also, remember a Windows update can solve many issues as drivers also get updates. So, check for any pending updates too.
Which solution worked for you? Did you find another fix? Let us know in the comments below!