如果您尝试在 Windows 10 设备上为存储空间^{(Storage Spaces)}创建存储池，但遇到错误消息“新建存储池向导未成功完成”^{(The New Storage Pool Wizard did not successfully complete )} ——那么这篇文章旨在帮助您。在这篇文章中，我们将提供您可以尝试解决问题的最合适的解决方案。

The New Storage Pool Wizard did not successfully complete, Could not create storage pool, One of the physical disks specified is not supported by this operation.

当您遇到此问题时，可能会描述操作未成功完成的原因。此描述可能会有所不同，但它们都是相同错误的实例——本文中提出的解决方案适用于所有人。

新建存储池向导^{(New Storage Pool Wizard)}未成功完成

如果您遇到此问题，可以尝试以下建议来解决问题。

1. 验证^(Verify)附加磁盘是否满足存储池要求
2. 初始化磁盘

让我们看一下关于列出的每个解决方案所涉及的过程的描述。

1]验证^(Verify)附加磁盘是否满足存储池要求

根据Microsoft文档，您可以使用通过串行连接 SCSI^{(Serial-Attached SCSI)} ( SAS )、串行ATA ( SATA ) 或USB连接的商品驱动器。抽象物理磁盘的存储层与^(Storage)存储^(Storage) 空间^(Spaces)不兼容。这包括虚拟机中的VHD^(VHDs)和直通磁盘，以及在物理磁盘之上分层实施RAID的存储子系统。^(RAID)

有关更多信息，请参阅存储空间：常见问题 (FAQ)^{(Frequently Asked Questions (FAQ))}。

2]初始化磁盘

此解决方案要求您初始化您尝试为其创建存储池的附加磁盘，并确保磁盘在磁盘管理^{(Disk Management)}工具中列为未分配。

要手动初始化驱动器，可以使用WinX菜单打开磁盘管理^{(open the Disk Management)}工具。在这里您可以找到未初始化的磁盘。

右键单击磁盘并选择Initialize Disk 选项。

在下一步中，您需要选择分区样式。建议使用MBR而不是 GPT 或 GUID 分区表。单击确定^(OK)按钮后，您的磁盘应该初始化。

您现在可以再次尝试创建存储池，该过程应该完成且没有任何错误。

希望这可以帮助！

The New Storage Pool Wizard did not successfully complete

If when you attempt to create a stоrage pool for Storage Spaces on your Windows 10 device, but you encounter the error message The New Storage Pool Wizard did not successfully complete – then this post is intended to help you. In this post, we will provide the most suitable solutions you can try to resolve the issue.

The New Storage Pool Wizard did not successfully complete, Could not create storage pool, One of the physical disks specified is not supported by this operation.

When you encounter this issue, there may be a description of why the operation didn’t complete successfully. This description may vary, nevertheless, they are all instances of the same error – the solution that is presented in this post applies to all.

The New Storage Pool Wizard did not successfully complete

If you’re faced with this issue, you can try the suggestions below to resolve the issue.

1. Verify attached disk meets storage pool requirements
2. Initialize the disk

Let’s take a look at the description of the process involved concerning each of the listed solutions.

1] Verify attached disk meets storage pool requirements

According to Microsoft documentation, you can use commodity drives attached via Serial-Attached SCSI (SAS), Serial ATA (SATA), or USB. Storage layers that abstract the physical disks are not compatible with Storage Spaces. This includes VHDs and pass-through disks in a virtual machine, and storage subsystems that layer a RAID implementation on top of the physical disks.

Refer to Storage Spaces: Frequently Asked Questions (FAQ) for more.

2] Initialize the disk

This solution requires you to initialize the attached disk(s) you are trying to create a storage pool for and make sure the disks are listed as Unallocated in the Disk Management tool.

To initialize the drive manually, using the WinX menu, you can open the Disk Management tool. Here you can find the non-initialized disk.

Right-click on the disk and select Initialize Disk option.

In the next step, you need to select the partition style. It is suggested to use MBR instead of GPT or GUID Partition Table. After clicking the OK button, your disk should initialize.

You can now attempt the storage pool creation again, the process should complete without any error.

Hope this helps!

Related posts

• 如何在Windows 10 Storage Pool中更改Storage Spaces

• Storage Storage Storage Remove Drive Storage Storage在Windows 10中

• 如何在Windows 10中将驱动器添加到Storage Spaces到Storage Pool

• 如何在Windows 10中重命名Storage Spaces的Storage Pool

• Storage Pool的Storage Pool Storage Spaces Windows 10

• 如何在Edge中添加，删除，管理New Tab page上的Quick Links

• 在Windows 10创建New folder时File Explorer崩溃或死机

• Storage Windows 10中Storage Pool中的Optimize Drive Usage

• Chrome中New tab中的Make Google Drive打开文件

• Outlook.com中的New Mail，Calendar和People经验

• 如何在Edge中添加Outlook Smart Tile至New Tab Page

• 如何在New tab中从Firefox中禁用消息

• Windows 11为Business and Enterprise - New功能

• Hiberfil.sys，Pagefile.sys与该New Swapfile.sys file - 视窗10

• 如何升级为Storage Pool Storage Spaces在Windows 10

• 如何在Firefox中启用或禁用New Tab Page上的Adult Filter

• 从Explorer context菜单中从NEW submenu中删除项目

• 如何在Edge启用或禁用New Tab page上的Search Box

• Windows 10 version 2004 May 2020 Update New功能

• New特征Windows 10 version 20H2 October 2020 Update