(USER_MODE_HEALTH_MONITOR)由于硬件设备不兼容或图像文件损坏，会触发Windows 10系统中的(Windows 10)USER_MODE_HEALTH_MONITOR错误。用户可以通过使用可用的系统还原点(System Restore)执行系统还原来快速解决问题。
此外，如果您的系统遇到驱动程序问题或缺少系统资源，您可能会遇到USER_MODE_HEALTH_MONITOR错误。此停止代码是在存储空间不足的系统上触发的蓝屏死机错误。
The USER_MODE_HEALTH_MONITOR bug check has a value of 0x0000009E.
此错误检查表明一个或多个关键用户模式组件未能满足运行状况检查。
由于多种原因可能会发生此错误，因此没有可用于解决此问题的首选修复程序。因此，为了方便用户，我们概述了一些故障排除步骤，以帮助您解决Windows计算机中的错误。
修复 USER_MODE_HEALTH_MONITOR(Fix USER_MODE_HEALTH_MONITOR)停止错误
以下是用户可以尝试的故障排除步骤列表：
- 运行系统文件检查器工具。
- 修复系统映像。
- (Generate System Health Report)使用Perfmon生成系统健康报告。
- 在干净启动状态下进行故障排除。
- 执行系统还原(System Restore)以恢复到较早的状态。
让我们在下面进一步讨论上述步骤 -
1]运行系统文件检查器工具
要在 Windows 中运行系统文件检查器， 请在开始(Start)搜索框中键入cmd 。在出现的结果中，右键单击 cmd 并选择 Run As Administrator。
如果您不以管理员身份运行(Administrator)命令提示符(Command Prompt)，您将看到一条消息：
You must be an administrator running a console session in order to use the sfc utility
在打开的Admin命令提示符窗口中，键入以下内容并按 Enter：
sfc /scannow
SFC实用程序将运行一段时间，如果发现任何损坏，请在重新启动时更换它们。
2]修复系统映像
在Windows映像无法使用的情况下，您可以使用部署映像和服务管理 ( DISM ) 工具来更新文件并更正问题。在系统不一致和损坏的情况下，您可以通过使用 Cleanup-Image 功能以及这些可用开关来使用DISM工具。(DISM)
/ScanHealth：这将检查组件存储损坏并将损坏记录到 C:WindowsLogsCBS CBS.log但使用此开关没有修复损坏。这对于记录存在的损坏（如果有）很有用。采用：
Dism /Online /Cleanup-Image /ScanHealth
这可能需要 10-15 分钟。
/CheckHealth：这将检查注册表中是否已存在组件损坏标记。这只是查看当前是否存在腐败的一种方式。为此，请使用：
Dism /Online /Cleanup-Image /CheckHealth
这可能需要不到一分钟的时间。
/ RestoreHealth：这会检查组件存储损坏，将损坏记录到 C:WindowsLogsCBSCBS.log 并使用Windows 更新(Windows Update)修复(FIXES)损坏。采用：
Dism /Online /Cleanup-Image /RestoreHealth
此过程可能需要 15 分钟或更长时间，具体取决于损坏程度。
要执行这些操作，您必须打开提升的命令提示符(elevated Command Prompt)。首先(First)，您必须检查是否存在损坏以及损坏或图像是否可修复。如果是，那么您可以使用/RestoreHealth开关来修复损坏。
3]使用Perfmon生成系统健康报告(Generate System Health Report)
为了能够找出 Windows 计算机的健康状况，您可以使用名为Perfmon 或 Performance Monitor 或 perfmon.exe的内置工具。(perfmon.exe.)
要生成系统性能报告，请打开Run，键入以下命令，然后按 Enter(Enter)：
perfmon /report
性能监视器(Performance Monitor)现在将开始分析您的系统状态。
任务完成后，您将看到如下所示的结果列表。
测试完成后，您还可以通过单击“文件(File )” > “另存为”来导出和保存结果。(SaveAs.)
完成后，使用它来识别问题并进一步排除故障。
4]在干净启动状态下进行故障排除
要进入 Clean Boot State， 请 在开始搜索中键入MSConfig ，然后按 Enter(Enter)打开System Configuration Utility。单击(Click)常规(General)选项卡，然后单击 选择性启动(Selective Startup)。
Hide All Microsoft Services
Disable all.
单击应用(Apply)，然后单击确定(OK)并重新启动计算机。这将使Windows进入干净启动状态(Boot State)。
到达这里后，您需要手动排除故障以识别有问题的进程(troubleshoot manually to identify the offending process)。
5]执行(Perform)系统还原(System Restore)以恢复到早期状态。
要执行此操作，请打开“运行”(Run)框，键入rstrui.exe 并按 Enter 以打开“系统还原”。
系统还原将打开
点击下一步
选择要还原计算机的还原点(Restore Point)，然后单击下一步(Next)
查看详细信息并确认。单击完成(Finish)并等待该过程完成。
注意：(NOTE:)为提高稳定性，请从官方网站下载并安装适用于您的外围设备的最新驱动程序。(download and install the latest drivers)
我们列出了所有可以帮助您快速解决错误的有效修复程序。
USER_MODE_HEALTH_MONITOR error on Windows 10
USER_MODE_HEALTH_MONITOR error in Windows 10 system is triggered due to іncompatible hardware devices or corrupted image files. Users can quiсkly resolve the іssue by performіng a system restore using the available System Restore Рoints.
Also, if your system suffers from driver issues or missing system resources, you may encounter the USER_MODE_HEALTH_MONITOR error. This stop code is a Blue Screen of Death error that is triggered on a system with low storage.
The USER_MODE_HEALTH_MONITOR bug check has a value of 0x0000009E.
This bug check indicates that one or more critical user-mode components failed to satisfy a health check.
Since this error can occur due to several reasons, there is no go-to fix that you can apply to resolve the issue. SO to make it easy for users, we have outlined some troubleshooting steps to help you resolve the error in Windows computers.
Fix USER_MODE_HEALTH_MONITOR stop error
Here is a list of troubleshooting steps users can try:
- Run System File Checker tool.
- Repair System Image.
- Generate System Health Report using Perfmon.
- Troubleshoot in Clean Boot State.
- Perform a System Restore to get back to an earlier state.
Let us discuss the aforementioned steps further below-
1] Run System File Checker tool
To run the System File Checker in Windows, type cmd in the Start search box. In the result, which appears, right-click on cmd and select Run As Administrator.
If you do not run the Command Prompt as Administrator, you will see a message:
You must be an administrator running a console session in order to use the sfc utility
In the Admin command prompt window which opens, type the following and hit Enter:
sfc /scannow
The SFC utility will run for a while and if any corruptions are found, replace them on reboot.
2] Repair System Image
In a scenario where Windows image becomes unserviceable, you can use the Deployment Imaging and Servicing Management (DISM) tool to update the files and correct the problem. In the case of system inconsistencies and corruption, you can use the DISM tool by using the Cleanup-Image functionality along with these available switches.
/ScanHealth: This checks for component store corruption and records that corruption to the C:\Windows\Logs\CBS\CBS.log but no corruption is fixed using this switch. This is useful for logging what, if any, corruption exists. Use:
Dism /Online /Cleanup-Image /ScanHealth
This might take 10-15 minutes.
/CheckHealth: This checks to see if a component corruption marker is already present in the registry. This is merely a way to see if corruption currently exists. To do this, Use:
Dism /Online /Cleanup-Image /CheckHealth
This might take less than a minute.
/RestoreHealth: This checks for component store corruption records the corruption to C:\Windows\Logs\CBS\CBS.log and FIXES the corruption using Windows Update. Use:
Dism /Online /Cleanup-Image /RestoreHealth
This process might take 15 mins or more depending on the level of corruption.
To carry out these operations you have to open an elevated Command Prompt. First, you have to check if there are corruptions and if the corruption or image is repairable. If it is, then you can use the /RestoreHealth switch to fix the corruption.
3] Generate System Health Report using Perfmon
To be able to find out the state of health of your Windows computer, you can use a built-in tool called Perfmon or Performance Monitor or perfmon.exe.
To generate a performance report of your system, open Run, type the following command, and hit Enter:
perfmon /report
The Performance Monitor will now start analyzing your system state.
Once the task has been completed, you will be presented with a list of findings as shown below.
Once the test is complete, you will also be able to export and save the findings by clicking on the File > SaveAs.
Once done, use it to identify issues and troubleshoot further.
4] Troubleshoot in Clean Boot State
To enter Clean Boot State, type MSConfig in start search and hit Enter to open the System Configuration Utility. Click the General tab, and then click Selective Startup.
Hide All Microsoft Services
Disable all.
Click on Apply and then OK and restart the computer. This will put Windows into a Clean Boot State.
Once here, you need to troubleshoot manually to identify the offending process.
5] Perform a System Restore to get back to an earlier state.
To perform this operation, open the Run box, type rstrui.exe and hit Enter to open System Restore.
The System Restore will open
Click on Next
Select a Restore Point, to which you want to restore your computer, and click Next
Review the details and confirm them. Click on Finish and wait for the process to be completed.
NOTE: For more stability, download and install the latest drivers for your peripherals from the official sites.
We have listed all the effective fixes that can help you resolve the error quickly.
