Bad Pool Caller 错误是蓝屏死机 (BSOD) 错误^{(Blue screen of Death (BSOD) error)}，这是由于驱动程序安装过时或损坏而发生的。在许多情况下，您最近安装的新硬件或软件也可能导致此错误。

Bad Pool Caller 错误^{(Bad Pool Caller Error)}( BAD_POOL_CALLER )的原因：

• 因为硬盘坏了。
• 过时、损坏或旧的设备驱动程序。
• 病毒或恶意软件。
• 损坏的注册表信息。
• 损坏或损坏的内存问题。

尝试一些简单的杂项修复：

• 使用您的防病毒软件运行完整的系统病毒和恶意软件扫描。
• 使用英特尔驱动程序更新实用程序^{(Intel driver update utility)}更新您的驱动程序。
• 安装并运行CCleaner和Malwarebytes。
• ^(Install)通过Windows更新^(Windows)安装任何挂起的更新。
• 尝试使用系统还原来解决此问题。

好吧，可能有两种情况，即：您可以启动到Windows，或者您不能；如果不能，请在此处关注此帖子，以启用旧版高级启动菜单^{( this post here to enable the legacy advanced boot menu)}以启动到安全模式。

修复坏池调用者错误^{(Fix Bad Pool Caller Error)}( BAD_POOL_CALLER )：

方法一：运行系统文件检查器^{(System File Checker)}并检查磁盘^{(Check Disk)}

1. 从高级启动菜单^{(Advanced boot menu)}，将您的 PC 启动到安全模式。

2. 在安全模式下，按Windows键 + X 并单击命令提示符（管理员）。^{(Command Prompt(Admin).)}

3. 在 cmd 中输入以下命令并在每个命令后按回车键：

sfc /scannow
chkdsk /f C:

4. 完成后，退出命令提示符。

5. Windows搜索栏中的下一个内存类型，然后选择“ Windows 内存诊断”。^{(Windows Memory Diagnostic.)}”

6. 在显示的选项集中，选择“立即重启并检查问题^{(Restart now and check for problems)}”。

7. 之后，Windows将重新启动以检查可能的内存错误，并希望诊断出您收到^(Windows)蓝屏死机 (BSOD)^{(Blue Screen of Death (BSOD))}错误消息的可能原因。

8. 重新启动您的 PC 并检查问题是否已解决。

方法二：运行 Memtest86

现在运行Memtest86，一个 3rd 方软件，但它消除了所有可能的内存错误异常，因为它在Windows环境之外运行。

注意：^(Note:)开始之前，请确保您可以访问另一台计算机，因为您需要将软件下载并刻录到光盘或USB闪存驱动器。运行Memtest^(Memtest)时最好让计算机过夜，因为这可能需要一些时间。

1. 将USB闪存驱动器连接到您的系统。

2. 下载并安装适用于 USB Key 的Windows Memtest86 自动安装程序^{(Windows Memtest86 Auto-installer for USB Key)}。

3. 右键单击​​刚刚下载的图像文件并选择“在此处提取^{(Extract here)}”选项。

4. 解压后，打开文件夹并运行Memtest86+ USB Installer。

5. 选择您插入的USB驱动器来刻录MemTest86软件（这将格式化您的USB驱动器）。

6. 上述过程完成后，将USB插入PC，这会给出Bad Pool Caller Error (BAD_POOL_CALLER)。

7. 重新启动您的 PC 并确保选择从USB闪存驱动器启动。

8. Memtest86将开始测试您系统中的内存损坏。

9. 如果你通过了所有的测试，你可以确定你的记忆是正常工作的。

10.如果某些步骤不成功，那么Memtest86会发现内存损坏，这意味着你的BAD_POOL_CALLER 蓝屏死机错误是因为内存坏/损坏。

11.为了修复坏池调用错误^{(fix a bad pool caller error)}，如果发现坏内存扇区，您将需要更换您的RAM 。

方法 3：运行驱动程序验证程序

此方法仅在您可以正常登录 Windows 时有用，而不是在安全模式下。接下来，确保创建一个系统还原点。

运行驱动程序验证程序^{(Run Driver verifier)}以修复坏池调用者错误。

就是这样; 您已成功修复 Bad Pool Caller Error (BAD_POOL_CALLER)，^{(fix Bad Pool Caller Error (BAD_POOL_CALLER),)}但如果您对这篇文章仍有任何疑问，请随时在评论部分提出，我将很乐意为您提供帮助。

Fix Bad Pool Caller Error (BAD_POOL_CALLER)

The Bad Pool Caller error is the Blue screen of Death (BSOD) error, which occurs because of the outdated or corrupt driver installation. In many cases, the new hardware or software you might have recently installed can also cause this error.

Causes of Bad Pool Caller Error (BAD_POOL_CALLER):

• Because of a damaged hard disk.
• Outdated, corrupt, or old device drivers.
• Virus or malware.
• Corrupt registry information.
• Damaged or corrupt memory issues.

Some simple miscellaneous fixes to try:

• Run a full system virus and malware scan with your antivirus.
• Update your driver with Intel driver update utility.
• Install and run CCleaner and Malwarebytes.
• Install any pending updates through Windows update.
• Try to fix the issue by using System Restore.

Well, there can be two cases, which are: either you can boot to Windows or you can’t; if you can’t, then follow this post here to enable the legacy advanced boot menu to boot into safe mode.

Fix Bad Pool Caller Error (BAD_POOL_CALLER):

Method 1: Run System File Checker and Check Disk

1. From the Advanced boot menu, boot your PC into safe mode.

2. In safe mode, press Windows key + X and click on Command Prompt(Admin).

3. Type the following commands into the cmd and hit enter after each one:

sfc /scannow
chkdsk /f C:

4. Once they are completed, exit the command prompt.

5. Next type of memory in the Windows search bar and select “Windows Memory Diagnostic.”

6. In the set of options displayed, select “Restart now and check for problems.”

7. After which Windows will reboot to check for possible memory errors and will hopefully diagnose the possible reasons as for why you get the Blue Screen of Death (BSOD) error message.

8. Restart your PC and check if the problem is resolved or not.

Method 2: Run Memtest86

Now run the Memtest86, a 3rd party software, but it eliminates all the possible exceptions of memory errors as it runs outside of the Windows environment.

Note: Before starting, make sure you have access to another computer as you will need to download and burn the software to the disc or USB flash drive. It’s best to leave the computer overnight when running a Memtest as it is likely to take some time.

1. Connect a USB flash drive to your system.

2. Download and install Windows Memtest86 Auto-installer for USB Key.

3. Right-click on the image file which you just downloaded and selected the “Extract here” option.

4. Once extracted, open the folder and run the Memtest86+ USB Installer.

5. Choose you’re plugged USB drive to burn the MemTest86 software (This will format your USB drive).

6. Once the above process is finished, insert the USB to the PC, which is giving the Bad Pool Caller Error (BAD_POOL_CALLER).

7. Restart your PC and make sure that boot from the USB flash drive is selected.

8. Memtest86 will begin testing for memory corruption in your system.

9. If you have passed all the tests, you can be sure that your memory is working correctly.

10. If some of the steps were unsuccessful, then Memtest86 will find memory corruption, which means that your BAD_POOL_CALLER blue screen of death error is because of bad/corrupt memory.

11. In order to fix a bad pool caller error, you will need to replace your RAM if bad memory sectors are found.

Method 3: Run Driver Verifier

This method is only useful if you can normally log into your Windows, not in the safe mode. Next, make sure to create a System Restore point.

Run Driver verifier to fix Bad Pool Caller Error.

That’s it; you have successfully fix Bad Pool Caller Error (BAD_POOL_CALLER), but if you still have any questions regarding this post, feel free to ask them in the comment section, and I will be happy to assist you.

Related posts

• Windows 10中的Fix BAD POOL HEADER

• Fix Bad Image Error - Application.exe无论是在Windows上运行，还是它包含错误

• 如何在 Windows 上修复错误的 Pool Caller BSOD

• 修复 Windows 中的“磁盘没有足够的空间来替换坏集群”错误

• Fix的Windows 10 Update Error 0x800703F1

• Fix Windows Update Error 0x800f0905

• Fix Windows Update Error Code 0x80080008

• Fix Windows Update Error 0x8007065e; Feature Update无法安装

• Fix Windows Update Error 0x80073712在Windows 11/10上

• Fix Windows Update Error 0x80240035

• Fix Windows Update Error 0x8024a000在Windows 10上

• Fix Windows Defender Error 0x800b0100在Windows 10上

• Windows 11/10中的Fix Microsoft Teams Error caa70004

• Windows 10 Activation Error 0xc004e016

• 如何Fix Windows Update Error Code 80244010

• Fix Windows Update Error C8000266？

• Fix的Windows 10安装Update Error 0xc1900104时Feature Update

• 激活期间Fix Windows Script Host Error 0xc004f025

• Windows 10上的Fix Script Error

• Fix Printer在Windows 10上的Error State