因此，您最近更新到Windows 10并且您的系统出现了一些问题。您正在尝试将Windows 10启动到恢复模式，但快捷键F8 键^(key)或Fn + F8 keys不起作用。你在泡菜吗？^{(Are you in a pickle?)}不用担心！有几种方法可以做到这一点，我们今天将讨论。但是，什么是恢复模式？^{(What is Recovery Mode?)}恢复模式^(Mode)是Windows在遇到关键系统问题时启动的一种特殊方式。这有助于CPU了解问题的严重性，从而有助于进行故障排除。下面列出了恢复模式的主要用途：^{(primary uses of Recovery Mode)}

• 允许进行故障排除^{(Allows to Troubleshoot)}- 由于即使系统中存在恶意软件或病毒，您也可以访问恢复模式，因此您可以使用“^(Recovery)故障排除”^{(Troubleshoot)}选项诊断问题。
• 使PC 免受损坏 -^{(Saves PC from Damage –)}恢复模式^(Mode)通过限制对系统的损坏来充当防御者。它限制服务和设备的使用，并禁用与硬件相关的驱动程序以快速解决问题。例如，像autoexec.bat或config.sys文件这样的服务不会在恢复模式下运行。
• 修复损坏的程序 –^{(Fixes Corrupt Programs –)} Windows 10 恢复模式在重新启动系统时修复有缺陷或损坏的程序方面发挥着关键作用。

如何在 Windows 10 上启动进入恢复模式^{(How to Boot into Recovery Mode on Windows 10)}

在学习如何操作之前，重要的是要注意 Windows 10在遇到系统关键问题时可以自动启动到恢复模式。^{(Recovery Mode)}在这种情况下，请正常引导系统几次，然后再尝试引导进入恢复^(Recovery)模式。要了解有关Windows 8.1或 10 和Windows 11中的^{(Windows 11)}恢复^(Recovery)选项的更多信息，请单击此处^{(click here)}。

方法一：系统启动时按F11键^{(Method 1: Press F11 Key During System Startup)}

这是将Windows 10启动到恢复模式的最简单方法。

1. 点击开始^(Start)菜单。单击电源图标^{(Power icon)}>重新启动^(Restart)选项以重新启动您的 PC。

2. Windows系统开始启动后，按键盘上的F11 键^{(F11 key)}。

另请阅读：^{(Also Read:)} 什么是 Windows 10 启动管理器？^{(What is Windows 10 Boot Manager?)}

方法二：重启电脑时按住Shift键
^{(Method 2: Press Shift Key While Restarting PC )}

您可以通过多种方式强制系统启动 Windows 10 恢复模式。尝试使用以下步骤从“开始”菜单访问^{(Start Menu)}恢复模式。^{(Recovery Mode)}

1.如前所述， 导航至Start > Power 图标。^(icon)

2. 按住Shift 键^{(Shift key)}的同时单击重新启动^{(Restart )}。

您将被重定向到Windows 10恢复启动菜单。现在，您可以根据自己的选择选择选项。

注意：^(Note:)下面列出了进入高级恢复设置^{(Advanced Recovery Settings)}的步骤。

3. 在这里，点击疑难解答^{(Troubleshoot)}，如图所示。

4. 然后，选择高级选项^{( Advanced options)}。

方法 3：在设置中使用恢复选项
^{(Method 3: Use Recovery Option in Settings )}

以下是使用“设置”应用访问Windows 10中的^{(Windows 10)}恢复模式^{(Recovery Mode)}的方法：

1. 搜索并启动设置^(Settings)，如下图所示。

2. 点击更新和安全^{(Update & Security)}，如图所示。

3. 单击左侧面板中的恢复，然后单击右侧面板^{( Recovery )}中高级启动^{(Advanced startup )}下的立即重新^{(Restart Now)}启动。

4. 您将导航到Windows 恢复环境^{(Windows Recovery Environment)}，如下图所示。根据需要进行。

另请阅读：^{(Also Read:)} 如何访问 Windows 10 中的高级启动选项^{(How to Access Advanced Startup Options in Windows 10)}

方法 4：运行命令提示符^{(Method 4: Run Command Prompt)}

您可以使用命令提示符将^{(Command Prompt)}Windows 10引导至恢复模式，如下所示：

1.通过Windows 搜索栏^{(Windows Search bar)}启动命令提示符^{(Command Prompt )}，如图所示。

2.输入^(Enter)命令：shutdown.exe /r /o回车执行。

3. 确认提示您即将退出^{(You’re about to be signed out)}以继续进入 Windows RE。

方法5：创建和使用Windows安装U盘^{(Method 5: Create & Use Windows Installation USB Drive)}

如果上述方法都不适合您，请使用Windows安装USB驱动器启动您的计算机并按照此方法中的说明访问修复设置。

注意：^(Note:)如果您没有Windows 安装 U 盘^{(Windows Installation USB Drive)}，则需要在另一台计算机上创建可启动U 盘。^{(USB Drive)}在此处阅读有关如何使用媒体创建工具创建 Windows 10 安装媒体的指南。^{(How to Create Windows 10 Installation Media with Media Creation Tool here.)}

1. 将Windows 安装 USB 驱动器^{(Windows installation USB Drive)}插入您的设备。

2. 从每个旁边的下拉选项中选择以下字段：

• 安装语言^{(Language to install)}
• 时间和货币格式^{(Time and currency format)}
• 键盘或输入法^{(Keyboard or input method)}

3. 然后，单击下一步^(Next)。

4. 在Windows 设置^{(Windows Setup)}屏幕中，单击修复您的计算机^{(Repair your computer)}。

5. 您将被重定向到之前的Windows 10恢复启动菜单蓝屏。

受到推崇的：^{(Recommended:)}

• 多少 RAM 才足够^{(How Much RAM Is Enough)}
• 如何消肿 Windows 11^{(How to Debloat Windows 11)}
• 修复 Windows 10 中的未知 USB 设备^{(Fix Unknown USB Device in Windows 10)}
• 如何在 Windows 10 中禁用 WiFi Direct^{(How to Disable WiFi Direct in Windows 10)}

恢复是必不可少的并且在功能上是可行的。此外，有许多路线可用于访问相同的路线。我们希望我们提供有关如何将 Windows 10 引导至恢复模式的^{(how to boot Windows 10 into Recovery Mode)}全面解决方案。如果您有任何疑问或建议，请将它们放在下面的评论部分。

How to Boot Windows 10 into Recovery Mode

So, you have recently updated to Windows 10 and there have beеn sоme іssues in your system. You arе trying to boot Windows 10 into reсovеry mode, bυt the shortcut F8 key or Fn + F8 keys do not work. Are you in a pickle? Do not worry! There are several ways to do so which we will discuss today. But, What is Recovery Mode? Recovery Mode is a particular way in which Windows boots when it faces critical system issues. This helps the CPU understand the magnitude of the issue, and thus aid in troubleshooting. The primary uses of Recovery Mode are listed below:

• Allows to Troubleshoot – Since you can access Recovery mode even when there is malware or virus in the system, it allows you to diagnose the problem with the Troubleshoot option.
• Saves PC from Damage – Recovery Mode acts as a defender by restricting the damage to your system. It limits the usage of services and devices, and disable hardware-related drivers to solve the issue quickly. For example, services like the autoexec.bat or config.sys files do not run in recovery mode.
• Fixes Corrupt Programs – Windows 10 recovery mode plays a pivotal role in fixing defective or corrupt programs while rebooting the system.

How to Boot into Recovery Mode on Windows 10

Before learning how to do so, it is important to note that Windows 10 can automatically boot into Recovery Mode when faced with a system-critical problem. In this case, boot the system a few times normally before attempting to boot into Recovery mode again. To learn more about Recovery options in Windows 8.1 or 10 and Windows 11, click here.

Method 1: Press F11 Key During System Startup

This is the easiest way to boot Windows 10 into recovery mode.

1. Click on Start menu. Click on Power icon > Restart option to restart your PC.

2. Once your Windows system begins to turn on, press the F11 key on the keyboard.

Also Read: What is Windows 10 Boot Manager?

Method 2: Press Shift Key While Restarting PC

There are multiple ways in which you can force your system to boot windows 10 recovery mode. Try to access the Recovery Mode from Start Menu using the steps given below.

1. Navigate to Start > Power icon as earlier. 

2. Click on Restart while holding the Shift key.

You will be redirected to Windows 10 recovery boot menu. Now, you can choose the options as per your choice.

Note: Listed below are the steps to go to Advanced Recovery Settings.

3. Here, click on Troubleshoot, as shown.

4. Then, select Advanced options.

Method 3: Use Recovery Option in Settings

Here’s how to access Recovery Mode in Windows 10 using Settings app:

1. Search and launch Settings, as illustrated below.

2. Click on Update & Security, as shown.

3. Click on Recovery from the left panel and click on Restart Now under Advanced startup in the right panel.

4. You will be navigated to Windows Recovery Environment, as depicted below. Proceed as needed.

Also Read: How to Access Advanced Startup Options in Windows 10

Method 4: Run Command Prompt

You can use Command Prompt to boot Windows 10 into recovery mode, as follows:

1. Launch Command Prompt through the Windows Search bar, as shown.

2. Type the command: shutdown.exe /r /o and hit Enter to execute.

3. Confirm the prompt stating You’re about to be signed out to proceed into Windows RE.

Method 5: Create & Use Windows Installation USB Drive

If none of the above methods worked for you, then boot your computer using a Windows installation USB drive and access the repair setting as explained in this method.

Note: If you do not have Windows Installation USB Drive, then you need to create a bootable USB Drive on another computer. Read our guide on How to Create Windows 10 Installation Media with Media Creation Tool here.

1. Insert the Windows installation USB Drive in your device.

2. Select the following fields from the drop-down options given next to each:

• Language to install
• Time and currency format
• Keyboard or input method

3. Then, click on Next.

4. In the Windows Setup screen, click on Repair your computer.

5. You will be redirected to Windows 10 recovery boot menu blue screens as earlier.

Recommended:

• How Much RAM Is Enough
• How to Debloat Windows 11
• Fix Unknown USB Device in Windows 10
• How to Disable WiFi Direct in Windows 10

Recovery is essential and functionally viable. Furthermore, there are numerous routes that can be used to access the same. We hope that we provided comprehensive solutions on how to boot Windows 10 into Recovery Mode. If you have any queries or suggestions, drop them in the comments section below.

Related posts

• 如何在Windows 10 Boot至Safe Mode

• 如何在 Windows 10 的启动菜单中添加安全模式

• Fix Computer Wo在Windows 10中没有转到Sleep Mode

• 在Windows 10中启用或禁用Developer Mode

• 如何在Safe Mode中Boot Windows 11

• 如何更改 Windows 10 启动徽标

• Windows 10中的Fix Black Desktop Background

• Windows 10中的Fix Task Host Window Prevents Shut Down

• 强制清除Windows 10中的Print Queue

• 在 Windows 10 中更改应用程序的兼容模式

• 如何在Windows 10中使用Fn Key Lock

• 3 Ways至Windows 10中的Increase Dedicated VRAM

• Windows 10中的Mouse Pointer Lags [已解决]

• 如何在Windows 10中创建System Image Backup

• 如何禁用Windows 10 Firewall

• 5 Ways以Safe Mode启动您的电脑

• 在 Windows 10 中退出安全模式的 2 种方法

• 如何在Windows 10启用有源Directory

• 如何在Windows 10上运行JAR Files

• 如何在Windows 10中禁用粘滞Corners