如果您 在Windows 11/10的网络连接面板中收到(Network Connections)网络电缆拔出(Network cable unplugged)错误,这里有一些解决问题的提示。它可能由于各种原因而出现,这里提到了一些可能的原因和解决方案。
如果您的有线互联网连接导致问题或无法正常工作,您可以启用或禁用适配器来解决问题。但是,在诊断时,如果您收到一条消息说网络(Network)电缆已拔下,您可能无法访问互联网。
修复(Fix Network)Windows 11 上的网络电缆拔出错误
要修复Windows 11/10网络电缆拔出(Network cable unplugged)错误,请按照下列步骤操作:
- 验证电缆
- 验证以太网端口
- 重新启用网络适配器
- 断开外部 Wi-Fi 适配器
- 运行网络适配器疑难解答
- 更改速度和双工
- 重置网络适配器
要详细了解这些步骤,请继续阅读。
1]验证电缆
在进行下一步之前,这可能是您需要检查的第一件事。如果您的电缆有故障,则无论如何都无法解决此问题。因此,您需要验证电缆是否处于工作状态。为此,您可以将此电缆连接到另一台 Wi-Fi 路由器或计算机,然后检查您是否可以访问互联网。如果是,请继续下一步。否则,您必须更换电缆。
2]验证以太网端口
有时,灰尘会导致您的计算机出现此问题,您最终会检查除端口之外的所有内容。您的以太网端口无法正常工作可能还有其他一些原因。但是,您可以通过使用其他互联网资源和电缆将您的计算机连接到另一个 Wi-Fi 路由器来验证这一点。
建议检查CPU的(CPU)以太网(Ethernet)端口和 Wi-Fi 路由器。如果其中任何一个有问题,您将无法在您的计算机上访问互联网。
3]重新启用网络适配器
您可以使用内置选项启用或禁用计算机上的网络适配器或端口。为此,您必须按照以下步骤操作:
- 按 Win+R 打开运行提示。
- 键入 ncpa.cpl 并按 Enter 按钮。
- 右键单击您的以太网(Ethernet)连接。
- 选择 禁用 (Disable )选项。
- 再次右键单击以太网(Ethernet)适配器并选择 启用 (Enable )选项。
现在检查您是否可以在您的计算机上访问互联网。
4]断开(Disconnect)外部Wi-Fi适配器
如果您的计算机上安装了外部Wi-Fi适配器,最好将其断开并检查以太网(Ethernet)连接。有时,Wi-Fi和有线网络会在Windows 11/10上产生冲突。这就是为什么最好拔下Wi-Fi加密狗并检查是否可以恢复以太网(Ethernet)连接。
5]运行网络适配器(Run Network Adapter)疑难解答
疑难解答程序可帮助您立即解决Windows 11/10 上的常见问题。如果网络适配器中存在一些 Internet 问题,您可以通过运行网络适配器(Network Adapter)疑难解答来修复它们。为此,您可以执行以下操作:
- 按 Win+I 打开 Windows 设置。
- 如果您使用的是 Windows 11,请转到 System > Troubleshoot
- 如果您使用的是 Windows 10,请转到 Update & security > Troubleshoot
- 单击 其他疑难解答 (Other troubleshooters )菜单。
- 找出网络适配器(Network Adapter)疑难解答并单击 运行 (Run )按钮。
- 按照屏幕说明进行操作。
它显示可能的原因和解决方案,以便您摆脱 Windows 11/10 上的网络电缆拔出 错误。(Network cable unplugged )
6]改变速度和双工
如果您最近更改了以太网连接的(Ethernet)速度(Speed)和双工(Duplex)设置,并且此后问题开始出现,您需要恢复更改。如果您不记得默认设置,您可以联系您的ISP或将其设置为 Auto Negotiation。为此,请执行以下操作:
- 按 Win+R,键入 ncpa.cpl 并按 Enter 按钮。
- 右键单击(Right-click)以太网并(Ethernet)选择 属性 (Properties )选项。
- 切换到 高级 (Advanced )选项卡。
- 找出 速度和双工 (Speed & Duplex )选项。
- 从下拉列表中选择 自动协商。(Auto Negotiation)
重新启动计算机并检查问题是否已解决。
7]重置网络适配器
通过重置网络适配器,您可以恢复应有的以太网连接。如果有一些文件或驱动程序损坏,此步骤可能对您很方便。
如果由于拔出或松动的电缆而无法连接到网络,您应该采取什么措施?
如果由于电缆拔出或松动而无法连接到网络,则应检查电缆和端口是否正常工作。有时,重新启动路由器也可以解决 Windows 11/10 上的 网络电缆拔出 (Network cable unplugged )问题。
笔记本电脑上的网线是什么?
网络电缆是用于从笔记本电脑上的Wi-Fi路由器访问 Internet的以太网电缆。(Ethernet)事实上,网线在台式机和运行Windows操作系统的笔记本电脑上的含义几乎相同。
就这样!希望(Hope)这些解决方案有所帮助。但是,如果您仍然遇到一些问题,最好致电ISP。
有关的:(Related:)
- 以太网不断断开连接(Ethernet keeps disconnecting)
- 以太网连接不工作。
Fix Network cable unplugged error on Windows 11
If you are getting Network cable unplugged error on Windows 11/10 in the Network Connections panel, here are some tips to fix the issue. It may appear due to various reasons, and some possible causes and solutions are mentioned here.
If your wired internet connection is causing issues or not working, you may enable or disable the adapter to troubleshoot the problem. However, while diagnosing, if you are getting a message saying Network cable unplugged, you may not access the internet.
Fix Network cable unplugged error on Windows 11
To fix Network cable unplugged error on Windows 11/10, follow these steps:
- Verify cable
- Verify Ethernet ports
- Re-enable network adapter
- Disconnect external Wi-Fi adapter
- Run Network Adapter troubleshooter
- Change Speed & Duplex
- Reset network adapter
To learn more about these steps in detail, continue reading.
1] Verify cable
It is probably the first thing you need to check before heading to the next step. If you have a faulty cable, you cannot fix this problem anyway. Therefore, you need to verify if the cable is in working condition or not. For that, you can connect this cable to another Wi-Fi router or computer and check if you can access the internet or not. If yes, go ahead with the next step. Otherwise, you have to replace the cable.
2] Verify Ethernet ports
At times, dust can cause this issue on your computer, and you end up checking everything except the port. There could be some other reasons why your Ethernet ports are not working. However, you can verify that by connecting your computer to another Wi-Fi router with another internet source and cable.
It is recommended to check the Ethernet port of your CPU and the Wi-Fi router. If either of them has an issue, you won’t be able to access the internet on your computer.
3] Re-enable network adapter
You can enable or disable the network adapter or port on your computer using the in-built options. For that, you have to follow these steps:
- Press Win+R to open the Run prompt.
- Type ncpa.cpl and hit the Enter button.
- Right-click on your Ethernet connection.
- Select the Disable option.
- Again right-click on the Ethernet adapter and select the Enable option.
Now check if you can access the internet on your computer or not.
4] Disconnect external Wi-Fi adapter
If you have an external Wi-Fi adapter installed on your computer, it is better to disconnect it and check the Ethernet connection. At times, Wi-Fi and wired network can create conflict on Windows 11/10. That is why it is better to unplug the Wi-Fi dongle and check if you can get back your Ethernet connection or not.
5] Run Network Adapter troubleshooter
Troubleshooters help you fix common issues within moments on Windows 11/10. If there are some internet problems in the network adapter, you can fix them by running the Network Adapter troubleshooter. For that, you can do the following:
- Press Win+I to open the Windows Settings.
- Go to System > Troubleshoot if you are using Windows 11.
- Go to Update & security > Troubleshoot if you are using Windows 10.
- Click on the Other troubleshooters menu.
- Find out the Network Adapter troubleshooter and click the Run button.
- Follow the screen instructions.
It displays possible causes and solutions so that you can get rid of Network cable unplugged error on Windows 11/10.
6] Change Speed & Duplex
If you have recently changed the Speed & Duplex setting for your Ethernet connection, and the problem has started after that, you need to revert the change. In case you do not remember the default setting, you can reach out to your ISP or set it as Auto Negotiation. For that, do the following:
- Press Win+R, type ncpa.cpl and press the Enter button.
- Right-click on the Ethernet and select the Properties option.
- Switch to the Advanced tab.
- Find out the Speed & Duplex option.
- Choose Auto Negotiation from the drop-down list.
Restart your computer and check if the problem has been resolved or not.
7] Reset network adapter
By resetting the network adapter, you can get back your Ethernet connection as it should be. If there is some file or driver corruption, this step might be handy for you.
What action should you take if you are unable to connect to the network due to unplugged or loose cable?
If you are unable to connect to the network due to an unplugged or loose cable, you should check if the cable and port are working correctly or not. At times, restarting the router could also solve the Network cable unplugged issue on Windows 11/10.
What is a network cable on laptop?
The network cable is the Ethernet cable that you use to get internet access from the Wi-Fi router on a laptop. In fact, the meaning of network cable is almost the same on a desktop as well as laptop computers running Windows operating system.
That’s all! Hope these solutions helped. However, if you are still getting some issues, it is better to call the ISP.
Related: