有时Windows或设备本身必须重新启动。虽然它通常很快，但如果您设法捕获处于这种状态的设备，它会给出错误代码 54^{(Code 54)}。这篇文章将帮助您解决此设备管理器错误代码^{(Device Manager error code)}。

此设备发生故障并正在重置（代码 54）

此设备发生故障并正在重置（代码 54^{(Code 54)}）

这是在执行ACPI^(ACPI)重置方法时分配的间歇性问题代码。虽然它会在一段时间内自动解决，但如果设备由于故障而从未重新启动，它将卡在此状态，需要重新启动系统。以下是一些您可以尝试的建议。

1]重新启动计算机

我们将知道重启如何解决多个问题，因为一切都是从零开始的。当Windows关闭时，它会删除它以临时形式保存的所有内容。由于在状态卡住时会发生此错误，因此让计算机休息即可完成工作。

2]重置无线网络

论坛用户还报告说，重置无线网络也可以解决问题。您可以使用netsh命令重置参数并重新连接到网络。在提升的命令提示符下执行下面提到的命令。

netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns

3]运行网络适配器疑难解答^{(Run Network Adapter Troubleshooter)}

转到Windows Settings > Update和Security > Troubleshoot > Additional Troubleshooters。

找到并运行网络适配器疑难解答。这个内置功能可以自行解决很多问题，最终用户担心复杂的命令。

要直接启动它，请从WinX Menu中打开Run框并执行以下命令：

msdt.exe /id NetworkDiagnosticsNetworkAdapter

单击^(Click)“下一步”按钮继续并按照向导得出结论。

您还可以使用第三方网络疑难解答^{(third-party network troubleshooter)}来解决此问题和许多其他问题。

4]运行网络重置

此设备发生故障并正在重置（代码 54）

网络重置功能将首先删除然后重新安装所有网络适配器，并将其他网络组件设置回其原始设置和默认值。

也就是说，虽然网络设备可能是导致此错误的原因之一，但可能不限于此。所以重启可能是你最好的选择。

This device has failed and is undergoing a reset (Code 54)

Sometimes Windows or the device itself has to restart. Whіle it’s υsually fast, but if you managed to catch a device in such a ѕtate, it gives an error Code 54. This post will help you resolve this Device Manager error code.

This is an intermittent problem code assigned while an ACPI reset method is being executed. While it will automatically resolve itself in a while, if the device never restarts due to a failure, it will be stuck in this state, and the system reboot is required. Here are some suggestions you may try.

1] Restart the computer

We will know how a restart resolves multiple problems because everything starts from a clean slate. When Windows shuts down, it deletes everything which it holds in a temporary form. Since this error occurs when the state is stuck, resting the computer will get the job done.

2] Reset Wireless Network

Forum users have also reported that resetting the wireless network can also resolve the problem. You can use the netsh command to reset the parameters and reconnect to the network. Execute the below-mentioned commands on an elevated command prompt.

netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns

3] Run Network Adapter Troubleshooter

Go to Windows Settings > Update and Security > Troubleshoot > Additional Troubleshooters.

Locate and run the Network adapter troubleshooter. This built-in feature can resolve a lot of problems on its own, with end-user worrying about complex commands.

To bring it up directly, from the WinX Menu, open the Run box and execute the following command:

msdt.exe /id NetworkDiagnosticsNetworkAdapter

Click on the Next button to proceed and follow the wizard to its conclusion.

You can also use a third-party network troubleshooter to resolve this and many other problems.

4] Run Network reset

This device has failed and is undergoing a reset (Code 54)

The Network Reset feature will first remove and then reinstall all your network adapters and set other networking components back to their original settings and default values.

That said, while network devices can be one of the reasons for this error, it may not be limited to this. So a restart might be your best bet.

鑫赵

About the author

我是一名软件工程师，拥有 Xbox Explorer、Microsoft Excel 和 Windows 8.1 Explorer 方面的经验。业余时间，我喜欢玩电子游戏和看电视。我拥有犹他大学的学位，目前在一家国际公司担任软件工程师。

此设备发生故障并正在重置（代码 54）

此设备发生故障并正在重置（代码 54^{(Code 54)}）

1]重新启动计算机

2]重置无线网络

3]运行网络适配器疑难解答^{(Run Network Adapter Troubleshooter)}

4]运行网络重置

This device has failed and is undergoing a reset (Code 54)