如果您面临我们无法完成更新、撤消更改、不要关闭计算机消息,并且您陷入了启动循环,那么您会很高兴来到这里,因为这篇文章将帮助您修复这个错误。(If you are facing We couldn’t complete the updates, Undoing changes, Don’t turn off your computer message, and you are stuck in a boot loop, then you will be glad you came here because this post is going to help you fix this error.)
好吧,Windows 10是Microsoft 操作系统(Microsoft Operating System)的最新版本,与所有其他操作系统一样,这似乎也有很多问题。但是我们在这里特别谈论的是在下载新更新并重新启动 PC 时,更新过程卡住了,Windows无法启动,我们剩下的就是这个烦人的错误消息:
We couldn't complete the updates, Undoing changes, Don't turn off your computer.
而且我们只是陷入了这个错误的无限循环,重新启动我们的 PC 并没有让我们回到这个错误。除了重启几次后出现上述错误之外,您可能会开始看到一些类似这样的进展:
Installing Updates 15% We couldn’t complete the updates, Undoing changes, Don’t turn off your computer Restarting
但是我们有一个坏消息要告诉你,不幸的是,这只会完成到 30%,然后它会再次重新启动,这会一直持续下去,直到你决定对此做些什么,好吧,你在这里,所以我猜猜是时候解决这个问题了。
无论如何,如果您在系统上遇到此错误,请不要担心,因为您只需遵循并应用下面的修复程序即可轻松解决相同问题。因此,不要浪费任何时间,让我们看看如何 修复我们无法完成更新,( Fix We couldn’t complete the updates, Undoing changes issue)在下面列出的故障排除步骤的帮助下撤消更改问题。
修复我们无法完成更新,撤消(Undoing)更改
注意:(NOTE: )不要(DO NOT),我重复一遍,不要(DO NOT)刷新/重置您(YOUR)的电脑。
如果您能够登录到 Windows:
方法一:删除软件分发文件夹(Method 1: Delete Software Distribution Folder)
1. 按 Windows Key + X并选择命令提示符(管理员)( Command Prompt (Admin))。
2. 现在在 cmd 中输入以下命令并在每个命令后按回车键:
net stop wuauserv
net stop bits
net stop cryptSvc
net stop msiserver
3. 现在浏览到 C:\Windows\SoftwareDistribution文件夹并删除里面的所有文件和文件夹。
4.再次(Again)转到命令提示符并键入这些命令中的每一个并按 Enter:
net start wuauserv
net start cryptSvc
net start bits
net start msiserver
5. 重新启动计算机以保存更改。
6. 再次尝试安装更新,这一次您可能会成功安装更新。
7. 如果您仍然遇到一些问题,请将您的 PC 恢复到下载更新之前的日期。
或者,无论您是否能够登录Windows,您都应该尝试方法 (c)、(d) 和 (e)。(Methods (c),(d), and (e).)
方法 2:下载 Windows 更新疑难解答(Method 2: Download Windows Update Troubleshooter)
1. 打开您的网络浏览器并转到以下页面(following page)。
2. 点击“下载并运行 Windows 更新疑难解答。(Download and run the Windows Update Troubleshooter.)”
3.文件下载完成后,双击运行。
4.单击下一步(Click Next)并让Windows 更新疑难解答(Windows Update Troubleshooter)运行。
5. 按照屏幕上的说明完成该过程。
6. 如果发现问题,单击应用(Apply)此修复程序。
7.最后,再次尝试安装更新,这一次你不会遇到我们无法完成更新,撤消更改(We couldn’t complete the updates, Undoing changes)错误消息。
方法 3:启用应用就绪(Method 3: Enable App Readiness)
1. 按Windows Key + R然后键入services.msc并按 Enter。
2. 导航到App Readiness并右键单击然后选择属性。(Properties.)
3. 现在将启动类型设置为自动(Automatic),然后单击启动。( Start.)
4.单击应用(Click Apply),然后单击确定并关闭 services.msc 窗口。
5.重新启动您的PC,您可能能够修复无法完成更新,撤消更改错误消息。(fix couldn’t complete the updates, Undoing changes error message.)
方法 4:禁用自动更新(Method 4: Disable Automatic Updates)
1. 按Windows Key + R然后键入services.msc并按 Enter。
2. 导航到Windows 更新(Windows Update)设置并右键单击然后选择属性。(Properties.)
3. 现在单击停止(Stop)并选择启动(Startup)类型为禁用。(Disabled.)
4.单击应用(Click Apply),然后单击确定并关闭 services.msc 窗口。
5. 重新启动您的 PC 并再次尝试安装更新。
看看你是否能够 修复我们无法完成更新,撤消更改问题(Fix We couldn’t complete the updates, Undoing changes issue),如果不能,则继续。
方法 5:增加 Windows 系统保留分区大小(Method 5: Increase Windows System Reserved Partition Size)
注意:如果您使用 BitLocker,请卸载或删除它。(NOTE: If you use BitLocker, uninstall or delete it.)
1.您可以手动或通过此分区管理软件(Partition Manager Software)增加保留分区的大小。
2. 按 Windows Key + X并单击磁盘管理。(Disk Management.)
3. 现在要扩展保留分区的大小,(extend the size of Reserved Partition)您必须有一些未分配的空间,否则您必须创建一些。
4. 要创建它,请右键单击您的分区之一(right-click on one of your partitions)(不包括 OS 分区)并选择Shrink Volume。
5. 最后,右键单击Reserved Partition并选择Extend Volume。
6.重新启动您的PC,您将能够修复我们无法完成更新,撤消更改消息。(fix we couldn’t complete the updates, Undoing changes message.)
方法 6:运行 Windows 10 更新疑难解答(Method 6: Run Windows 10 Update Troubleshooter)
您还可以通过运行“ Windows 更新(Windows Update)疑难解答”来解决我们无法完成更新的问题。(We couldn’t complete the updates issue)这将需要几分钟,并会自动检测并解决您的问题。
1. 按Windows Key + I 打开设置(Settings),然后单击更新和安全。(Update & Security.)
2. 从左侧菜单中确保选择疑难解答。(Troubleshoot.)
3. 现在在启动(Get)和运行部分下,单击Windows 更新。(Windows Update.)
4. 单击它后,单击Windows Update 下的“运行疑难解答”。(Run the troubleshooter)
5.按照屏幕上的说明运行疑难解答,看看您是否能够修复我们无法完成更新撤消更改问题。( Fix We couldn’t complete the updates Undoing changes issue.)
方法 7:如果所有其他方法都失败,则手动安装更新(Method 7: If all else fails then install the Updates Manually)
1. 右键单击“这台电脑(This PC)”并选择属性。(Properties.)
2. 现在在System Properties中,检查System type 并查看您是否有 32 位或 64 位操作系统。(System type and see if you have a 32-bit or 64-bit OS.)
3. 按Windows Key + I 打开设置(Settings),然后单击更新和安全(Update & Security)图标。
4. 在Windows Update下记下无法安装的更新的“ ( number of the update which fails to install.)KB ”编号。
5. 接下来,打开Internet Explorer 或 Microsoft Edge(Internet Explorer or Microsoft Edge),然后导航到Microsoft Update Catalog 网站(Microsoft Update Catalog website)。
注意:(Note:) 链接(Link)仅适用于Internet Explorer或Edge。
6. 在搜索框下,输入您在步骤 4 中记下的 KB 编号。
7. 现在单击您的操作系统类型(即 32 位或 64 位)(OS type i.e. 32-bit or 64-bit.)的最新更新旁边的下载按钮。(Download button)
8. 下载文件后,双击它并按照屏幕上的说明完成安装。(follow on-screen instructions to complete the installation.)
方法 8:杂项修复(Method 8: Miscellaneous Fixes)
1.运行CCleaner(CCleaner)修复注册表问题。
2. 创建一个新的管理员(Admin)帐户并尝试从该帐户安装更新。
3. 如果您知道哪些更新导致问题,请手动下载更新(manually download the updates)并安装它们。
4. 删除您 PC 上安装的所有VPN服务。(VPN)
5.禁用防火墙和防病毒(Antivirus),然后再次尝试安装更新。
6. 如果没有任何效果,请再次下载Windows,然后尝试安装更新。
如果您无法登录Windows并陷入重启循环。
重要提示:在您能够登录到 Windows 后,请尝试上述所有方法。(IMPORTANT: After you are able to log on to Windows try all the above-mentioned methods.)
Important Disclaimer:
方法 (i):系统还原(Method (i): System Restore)
1. 重新启动您的 Windows 10。
2. 系统重新启动后,进入 BIOS 设置(enter into BIOS setup)并configure your PC to boot from CD/DVD.
3. 插入Windows 10可启动安装DVD并重新启动您的 PC。
4. 当提示Press any key to boot from CD or DVD时,按任意键继续。(press any key to continue.)
5. 选择您的语言首选项,然后单击下一步(Next)。单击左下角的修复计算机。(Click Repair)
6. 在选择选项屏幕上,单击疑难解答。( Troubleshoot.)
7. 在疑难解答屏幕上,单击高级选项。( Advanced option.)
8. 在高级(Advanced)选项屏幕上,单击系统还原。( System Restore.)
9. 在当前更新之前选择一个还原点并还原您的计算机。
10.当Windows重新启动时,您不会看到我们无法完成更新,撤消更改(we couldn’t complete the updates, Undoing changes) 消息。
11.最后,尝试方法1,然后安装最新的更新。
方法 (ii):删除有问题的更新文件(Method (ii): Delete Problematic update files)
1. 重新启动您的 Windows 10。
2. 系统重新启动后,进入BIOS设置并configure your PC to boot from CD/DVD.
3. 插入Windows 10可启动安装DVD并重新启动您的 PC。
4. 当提示Press any key to boot from CD or DVD时,按任意键继续。
5. 选择您的语言首选项,然后单击下一步(Next)。单击左下角的修复计算机。(Click Repair)
6. 在选择选项屏幕上,单击疑难解答。(Troubleshoot.)
7. 在疑难解答屏幕上,单击高级选项。(Advanced option.)
8. 在高级(Advanced)选项屏幕上,单击命令提示符。( Command Prompt.)
9. 在 cmd 中键入这些命令并在每个命令后按回车键:
cd C:\Windows\
del C:\Windows\SoftwareDistribution*.* /s /q
10. 关闭命令(Command)提示符并重新启动您的 PC。您将能够正常登录Windows。
最后,尝试安装更新,您将能够修复我们无法完成更新,撤消更改( fix we couldn’t complete the updates, Undoing changes)错误消息。
方法 (iii):运行 SFC 和 DISM(Method (iii): Run SFC and DISM)
1.开机时打开命令提示符(Open Command Prompt at boot)。
2. 键入以下命令并按Enter 键(Enter):
Sfc /scannow
3. 让系统文件检查(System File Check)( SFC ) 运行,因为它通常需要 5-15 分钟才能完成。
4. 现在在 cmd 中输入以下内容(顺序很重要)并在每个之后按回车:
a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /online /Cleanup-Image /startcomponentcleanup
d) DISM /Online /Cleanup-Image /RestoreHealth
#WARNING:这不是一个快速的过程,组件清理可能需要将近 5 个小时。
5. 运行DISM后最好重新运行SFC /scannow以确保所有问题都已修复。
6.重新启动您的计算机,这次更新将安装没有任何问题。
方法 (iv):禁用安全启动(Method (iv): Disable Secure Boot)
1. 重启你的电脑。
2. 当系统重新启动时,在启动过程中按一个键进入(Enter)BIOS 设置。(BIOS setup)
3. 找到Secure Boot设置,如果可能,将其设置为Enabled。此选项通常位于“安全”选项卡、“引导”选项卡或“身份验证”选项卡中。(Security tab, the Boot tab, or the Authentication tab.)
#WARNING:禁用安全启动(Secure Boot)后,如果不将 PC 恢复到出厂状态,可能很难重新激活安全启动。(Secure Boot)
4.重新启动您的PC,更新将成功安装,没有任何错误消息 我们无法完成更新,撤消更改。( we couldn’t complete the updates, Undoing changes.)
5. 再次从 BIOS 设置中启用 Secure Boot选项。(Enable the Secure Boot)
方法(v):删除系统保留分区(Method (v): Delete the System Reserved partition)
1.打开命令提示符(Command Prompt)并键入以下每个命令,在每个命令后按回车:
bcdboot C:\Windows /s C:\
diskpart
list vol
select vol (Select System Volume)
act
list vol
select vol (Select System Reserved Volume)
inactive
exit
配置 BCD:
bcdedit /set {bootmgr} device partition=C:
bcdedit /set {default} device partition=C:
bcdedit /set {default} osdevice partition=C:
2. 在进行任何更改或重新启动之前,请确保您有Windows安装DVD或WinPE/WinRE Cd或U(USB)盘,以防Windows(Drive)启动(Windows Boot)失败。如果Windows无法启动,请使用Windows安装盘或WinPE/WinRE启动并在命令提示符下键入(如何创建 WinPE Bootable USB(How to create WinPE Bootable USB)):
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
3. 重新启动后,将WinRE从系统保留分区移动到系统分区。
4.再次(Again)打开命令提示符(Command Prompt)并键入以下命令,在每个命令后按回车:
为Diskpart(Diskpart)中的恢复分区分配驱动器号:
diskpart
list vol
select vol <Recovery Volume>
assign let=R
Disable WinRE:
reagentc /disable
(Remove WinRE)从保留分区中删除 WinRE :
rd R:\Recovery
将 WinRE 复制到系统分区:
robocopy C:\Windows\System32\Recovery\ R:\Recovery\WindowsRE\ WinRE.wim /copyall /dcopy:t
配置 WinRE:
reagentc /setreimage /path C:\Recovery\WindowsRE
启用 WinRE:
reagentc /enable
5. 为将来使用,在驱动器末尾(在 OS 分区之后)创建一个新分区,并存储WinRE和一个OSI文件夹(原始系统安装(System Installation)),其中包含Windows 10 DVD中包含的所有文件。请(Please)确保您的硬盘上有足够的可用空间来创建此分区驱动器(通常为 100GB)。如果您选择创建此分区,请务必使用Diskpart将分区 ID 标志设置为 27 (0x27) ,因为它指定它是一个恢复分区。
为你推荐:(Recommended for you:)
如果没有任何效果,则将您的 PC 恢复到较早的时间,从控制面板(Control Panel)中删除有问题的更新,禁用自动更新并正常使用您的 PC,直到Microsoft努力解决此更新问题。过几天大概20-30天再试试安装更新,如果成功了,恭喜你又卡住了,试试上面的方法,这次可能会成功。
就是这样,您已成功修复我们无法完成更新,正在撤消更改。不要关闭您的计算机(We couldn’t complete the updates, Undoing changes. Don’t turn off your computer) 问题,如果您对此更新仍有任何疑问,请随时在评论中询问他们。
Fix We couldn't complete the updates, Undoing changes
If you are facing We couldn’t complete the updates, Undoing changes, Don’t turn off your computer message, and you are stuck in a boot loop, then you will be glad you came here because this post is going to help you fix this error.
Well, Windows 10 is the latest edition of Microsoft Operating System and like all the other OS this sure seems to have a lot of issues too. But the one which we are particularly talking about here is while downloading the new updates and restarting the PC, the update process just stuck and Windows could not start and all we are left with is this annoying error message:
We couldn't complete the updates, Undoing changes, Don't turn off your computer.
And we are just stuck in an endless loop of this error and restarting our PC doesn’t get us anywhere except back to this error. In addition to the above error after restarting several times you may start to see some progress like this:
Installing Updates 15% We couldn’t complete the updates, Undoing changes, Don’t turn off your computer Restarting
But we have a piece of bad news for you, unfortunately, this will only complete till 30% and then it will again restart and this will go on and on and on till you decide to do something about it, well you are here so I guess its time to fix this issue.
Anyway, if you are facing this error on your system, don’t worry as you can easily address the same by just following and applying the fixes from below. So without wasting any time let’s see How to Fix We couldn’t complete the updates, Undoing changes issue with the help of the below-listed troubleshooting steps.
Fix We couldn’t complete the updates, Undoing changes
NOTE: DO NOT, I REPEAT, DO NOT REFRESH/RESET YOUR PC.
If you are able to log on to Windows:
Method 1: Delete Software Distribution Folder
1. Press Windows Key + X and select Command Prompt (Admin).
2. Now Type the following command inside cmd and hit enter after each one:
net stop wuauserv
net stop bits
net stop cryptSvc
net stop msiserver
3. Now browse to the C:\Windows\SoftwareDistribution folder and delete all the files and folders inside.
4. Again go to command prompt and type each of these commands and hit Enter:
net start wuauserv
net start cryptSvc
net start bits
net start msiserver
5. Restart your computer to save changes.
6. Again try installing the updates and this time you may be successful in installing updates.
7. If you are still facing some issues restore your PC to the date before downloading the updates.
Alternatively, whether you are able to log on to Windows or not, you should try Methods (c),(d), and (e).
Method 2: Download Windows Update Troubleshooter
1. Open your web browser and go to the following page.
2. Click on “Download and run the Windows Update Troubleshooter.”
3. After the file has finished downloading, double-click on it to run.
4. Click Next and let Windows Update Troubleshooter run.
5. Follow the on-screen instruction to complete the process.
6. If a problem is found, click on Apply this fix.
7. Finally, try again to install the updates and this time you won’t face We couldn’t complete the updates, Undoing changes error message.
Method 3: Enable App Readiness
1. Press Windows Key + R then type services.msc and hit enter.
2. Navigate to App Readiness and right click then select Properties.
3. Now set the Startup type to Automatic and click Start.
4. Click Apply followed by OK and close the services.msc window.
5. Restart your PC and you may be able to fix couldn’t complete the updates, Undoing changes error message.
Method 4: Disable Automatic Updates
1. Press Windows Key + R then type services.msc and hit enter.
2. Navigate to Windows Update setting and right click then select Properties.
3. Now click Stop and select Startup type to Disabled.
4. Click Apply followed by OK and close the services.msc window.
5. Restart your PC and again try installing updates.
See if you’re able to Fix We couldn’t complete the updates, Undoing changes issue, if not then continue.
Method 5: Increase Windows System Reserved Partition Size
NOTE: If you use BitLocker, uninstall or delete it.
1. You can increase the reserved partition size manually or by this Partition Manager Software.
2. Press Windows Key + X and click on Disk Management.
3. Now to extend the size of Reserved Partition you must have some unallocated space or you have to create some.
4. To create it, right-click on one of your partitions (Excluding OS partition) and select Shrink Volume.
5. Finally, right-click on Reserved Partition and select Extend Volume.
6. Restart your PC and you will be able to fix we couldn’t complete the updates, Undoing changes message.
Method 6: Run Windows 10 Update Troubleshooter
You can also solve the We couldn’t complete the updates issue by running “Windows Update troubleshooter”. This will take a few minutes and will automatically detect & fix your problem.
1. Press Windows Key + I to open Settings then click on Update & Security.
2. From the left-hand menu make sure to select Troubleshoot.
3. Now under Get up and running section, click on Windows Update.
4. Once you click on it, click on “Run the troubleshooter” under Windows Update.
5. Follow on-screen instructions to run the troubleshooter and see if you’re able to Fix We couldn’t complete the updates Undoing changes issue.
Method 7: If all else fails then install the Updates Manually
1. Right-click on “This PC” and select Properties.
2. Now in System Properties, check the System type and see if you have a 32-bit or 64-bit OS.
3. Press Windows Key + I to open Settings then click on Update & Security icon.
4. Under Windows Update note down the “KB“ number of the update which fails to install.
5. Next, open Internet Explorer or Microsoft Edge then navigate to Microsoft Update Catalog website.
Note: Link only work in Internet Explorer or Edge.
6. Under the search box, type the KB number you noted in step 4.
7. Now click on the Download button next to the latest update for your OS type i.e. 32-bit or 64-bit.
8. Once the file is downloaded, double-click on it and follow on-screen instructions to complete the installation.
Method 8: Miscellaneous Fixes
1.Run CCleaner to fix registry issues.
2. Create a new Admin account and try installing updates from that account.
3. If you know which updates are causing problems manually download the updates and install them.
4. Delete any VPN services installed on your PC.
5. Disable Firewall and Antivirus, then again try installing the updates.
6. If nothing works, again download the Windows and then try installing the updates.
If you are not able to log on to Windows and stuck in a restart loop.
IMPORTANT: After you are able to log on to Windows try all the above-mentioned methods.
Important Disclaimer:
Method (i): System Restore
1. Restart your Windows 10.
2. As the system restarts enter into BIOS setup and configure your PC to boot from CD/DVD.
3. Insert the Windows 10 bootable installation DVD and restart your PC.
4. When prompted to Press any key to boot from CD or DVD, press any key to continue.
5. Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
6. On choose an options screen, click Troubleshoot.
7. On Troubleshoot screen, click Advanced option.
8. On Advanced options screen, click System Restore.
9. Select a restore point before the current update and restore your computer.
10. When the Windows restart you won’t see we couldn’t complete the updates, Undoing changes message.
11. Finally, try method 1 and then install the latest updates.
Method (ii): Delete Problematic update files
1. Restart your Windows 10.
2. As the system restarts enter into BIOS setup and configure your PC to boot from CD/DVD.
3. Insert the Windows 10 bootable installation DVD and restart your PC.
4. When prompted to Press any key to boot from CD or DVD, press any key to continue.
5. Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
6. On choose an options screen, click Troubleshoot.
7. On Troubleshoot screen, click Advanced option.
8. On Advanced options screen, click Command Prompt.
9. Type these commands in cmd and press enter after each one:
cd C:\Windows\
del C:\Windows\SoftwareDistribution*.* /s /q
10. Close Command prompt and restart your PC. You will be able to log on to Windows normally.
Finally, try installing the update and you will be able to fix we couldn’t complete the updates, Undoing changes error message.
Method (iii): Run SFC and DISM
1. Open Command Prompt at boot.
2. Type the following command and hit Enter:
Sfc /scannow
3. Let System File Check (SFC) run as it usually takes 5-15 minutes to complete.
4. Now type the following in cmd (Sequential order is important) and hit enter after each one:
a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /online /Cleanup-Image /startcomponentcleanup
d) DISM /Online /Cleanup-Image /RestoreHealth
#WARNING: This is not a fast process, component cleanup can take almost 5 hours.
5. After running DISM it is a good idea to re-run SFC /scannow to make sure all the issues were fixed.
6. Restart your computer and this time updates will be installed without any problem.
Method (iv): Disable Secure Boot
1. Restart your PC.
2. When the system restart Enter the BIOS setup by pressing a key during the bootup sequence.
3. Find the Secure Boot setting, and if possible, set it to Enabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.
#WARNING: After disabling Secure Boot it may be difficult to re-activate Secure Boot without restoring your PC to the factory state.
4. Restart your PC and update will be installed successfully without any error message we couldn’t complete the updates, Undoing changes.
5. Again Enable the Secure Boot option from BIOS setup.
Method (v): Delete the System Reserved partition
1. Open Command Prompt and type each of the following commands, hit enter after each one:
bcdboot C:\Windows /s C:\
diskpart
list vol
select vol (Select System Volume)
act
list vol
select vol (Select System Reserved Volume)
inactive
exit
Configure BCD:
bcdedit /set {bootmgr} device partition=C:
bcdedit /set {default} device partition=C:
bcdedit /set {default} osdevice partition=C:
2. Before making any changes or rebooting, make sure that you have Windows installation DVD or WinPE/WinRE Cd or USB flash Drive in the case of Windows Boot failure. If Windows doesn’t boot, use the Windows installation disk or WinPE/WinRE to boot and at the command prompt type (How to create WinPE Bootable USB):
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
3. Once rebooted, move WinRE from the system reserved partition to the system partition.
4. Again open Command Prompt and type the following command, hit enter after each one:
Assign a drive letter to the recovery partition in Diskpart:
diskpart
list vol
select vol <Recovery Volume>
assign let=R
Disable WinRE:
reagentc /disable
Remove WinRE from Reserved partition:
rd R:\Recovery
Copy WinRE to System partition:
robocopy C:\Windows\System32\Recovery\ R:\Recovery\WindowsRE\ WinRE.wim /copyall /dcopy:t
Configure WinRE:
reagentc /setreimage /path C:\Recovery\WindowsRE
Enable WinRE:
reagentc /enable
5. For future use, create a new partition at the end of the drive (after the OS partition) and store WinRE and an OSI folder (Original System Installation) which contains all files contained within the Windows 10 DVD. Please make sure that you have enough free space on your hard disk to create this partition drive (usually 100GB). And if you choose to make this partition, it’s important that you set the partition ID flag to 27 (0x27) using Diskpart, as it specifies that it is a Recovery partition.
Recommended for you:
If nothing works then Restore your PC to an earlier time, delete the problematic update from Control Panel, disable the automatic updates and use your PC normally till Microsoft work towards fixing this update problem. In a few days probably 20-30 days try installing the updates again, if successful congratulations but if you are again stuck, then try the above methods, and this time you may succeed.
That’s it you have successfully fix We couldn’t complete the updates, Undoing changes. Don’t turn off your computer issue and if you still have any queries regarding this update please feel to ask them in comments.